Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"small block oil" Page 1 of 17

  • SuperSeal Small Block Chevy Oil Pan Gasket, 1975-1985 One-Piece
    SuperSeal Small Block Chevy Oil Pan Gasket, 1975-1985 One-Piece
    x
                

    Small Block Chevy oil pan gasket by SuperSeal. 

    • Left Hand side ('55-'79) and Right Hand side ('80-'85) dipstick
    • For 2-piece rear main seal blocks
    • Rubber gasket w/ steel bushings
    • '75-'85 w/ thick front seal
  • Ford Spin-On Bypass Adapter
    $21.99
    Product Rating: 5.00 Stars
    Ford Spin-On Bypass Adapter
    x
                Remote bypass adapters replace the bolt-on oil filter housing or the spin-on oil filter. Adapters feature 1/2" NPT female inlet/outlet threads. 

    Three items are needed for a remote oil filter assembly.

    1: Choose a remote bypass adapter to replace your oil filter.
    2: Choose a remote oil filter bracket (shown as suggestion below).
    3: Choose a hose kit (shown as a suggestion below) to connect the bypass adapter and oil filter bracket.

  • Ford Racing M-6880-A50 90 Degree Oil Filter Adapter
    Ford Racing M-6880-A50 90 Degree Oil Filter Adapter
    x
                

    There are times you just don't have room for the oil filter on your Ford powered toy. This adapter attaches where the oil filter mounts and turns the filter 90 degrees. Rotate filter toward front of engine to provide clearance for engine swaps and chassis modifications.

    Fits most Ford V8 and some 4 cyl. engines that use Fram PH8A/HP1 or Motorcraft FL-1A oil filters. 

  • Hy-Lube Small Block Chevy Oil Pump Block-Off Plate
    Hy-Lube Small Block Chevy Oil Pump Block-Off Plate
    x
                

    When running a dry sump oil system on your Small Block Chevy you should use this block-off plate on the rear main cap cover of the oil gallery.

    • Simulates torque loading
    • Anodized for protection
    • Hardware included
  • EngineQuest OFA305 Chevy Oil Filter Adapter w/ Bypass
    EngineQuest OFA305 Chevy Oil Filter Adapter w/ Bypass
    x
                

    This is a stock adapter with a bypass built into it. Replacement for stock oil filter adapter. Fits Small Block Chevy, Big Block Chevy, and early model 4.3L V6. Replaces GM part number 3952301. Includes two 5/16"-18 x 1" socket head cap screws.

    Bolts directly to the block without a gasket.

  • 1955-1979 Small Block Chevy Aluminum Oil Pan
    1955-1979 Small Block Chevy Aluminum Oil Pan
    x
                

    Polished, 1-piece cast aluminum finned oil pan, ribbed for beauty, strength and heat dissipation. This pan uses a drivers side dipstick. Includes drain plug and mounting bolts.

  • Small Block Chevy Oil Pump Shaft
    Small Block Chevy Oil Pump Shaft
    x
                Use these oil pump shafts to upgrade the weak link in any wet sump system. With steel sleeve. Works with stock or high volume pumps.
            
  • ARP Fasteners 230-7001 Small Block Chevy Oil Pump Studs
    ARP Fasteners 230-7001 Small Block Chevy Oil Pump Studs
    x
                For S/B Chevy only. Heat treated Chromoly steel. Comes with grade 8 nut and heat treated washer.
            
  • O-Ring Kit for Hy-Lube Chevy Oil Filter Adapter
    O-Ring Kit for Hy-Lube Chevy Oil Filter Adapter
    x
                

    Replacement O-ring seal kit for Hy-Lube remote oil filter block adapter #205-9910. Includes 2 bolts with washers and O-rings.

  • Dart 31161211 Special High Performance Chevy Block, 4.125 Inch Bore
    Dart 31161211 Special High Performance Chevy Block, 4.125 Inch Bore
    x
                

    Dart's Special High Performance (SHP) small-block meets the need for an affordable, precision-machined cast-iron block with superior features. Designed for high-performance and heavy-duty applications producing up to 600 horsepower, the SHP block is the ideal starting point for hot rodders, drag racers, circle track competitors, off-roaders, and high-performance marine enthusiasts. The SHP block as all the features needed without spending the big bucks and having to wait on your machine shop.

    • All new, precision machined
    • Cast from high nickel iron
    • Priority main oiling system
    • Siamese 4.125" bores
    • At 4.165" bore, .230" wall thickness
    • Clearance for 3.75" stroke w/ steel rods
    • Decks parallel within .002"
    • Made in USA
    • Blind head bolt holes
    • 350 main journals
    • Splayed 4-bolt center main caps
    • Two piece rear main seal
    • Accepts OEM roller rockers and cams
    • Uses 1981-85 oil pans & dipsticks
    • Accepts standard starters and bellhousings

    Dart SHP Block Instructions (PDF)

  • Valvetrain Oil Deflector
    $22.99
    Valvetrain Oil Deflector
    x
                Redirects oil from push rods to fulcrum balls, rockers and springs to provide maximum lubrication and cooling. Extends life of stock valve train assembly. Manufactured from lightweight aluminum. Ideal for claimer motors. Fits all S/B Chevy and Ford 302 motors with stamped rocker arms. 

    Polylocks are required for the installation of this item. Please see our suggestions on this page.

  • Small Block Chevy Deluxe Oil Pump Primer
    Small Block Chevy Deluxe Oil Pump Primer
    x
                

    Strong and Durable S/B Chevy oil pump primer. Features a special bushing to allow the lifters to be lubed.

  • Small Block Chevy Oil Pan Stud Kit
    Small Block Chevy Oil Pan Stud Kit
    x
                The black finish grade 5 bolts have a Bullet tip to make installation easy. The zinc plated self-locking nuts give uniform clamping for a positive seal.
            
  • 1955-79 Stock Raw Steel Small Block Chevy Oil Pan
    1955-79 Stock Raw Steel Small Block Chevy Oil Pan
    x
                

    These unplated, stock capacity oil pans are perfect for projects that don't need a chrome or aluminum pan.

    Now also available with inspection plug!

  • 1955-79 Small Block Chevy Chrome Oil Pans
    1955-79 Small Block Chevy Chrome Oil Pans
    x
                Chrome steel oil pan for 1955-79 small block Chevy with driver's side dipstick. Pan depth is 7". Center-to-center of the rear bolt holes is 5-13/16".

     
  • Small Block Chevy Camshaft Rear Seal, Standard Block, 2.105 O.D.
    Small Block Chevy Camshaft Rear Seal, Standard Block, 2.105 O.D.
    x
                

    These rear camshaft drive seal plates for standard bearing blocks help prevent oil, dirt, and other potential particles from entering your bearings while retaining your oil.  These seals are OEM replacements that will provide a secure, leak-free seal on your small block Chevy rebuild.

    • Standard bearing blocks
    • Prevents oil, dirt, and debris from entering your bearings
    • OEM replacement
    • Provides a secure, leak-free seal
    • Small Block Chevy Rear Seal
    • Black, rubber material
  • Small Block Chevy Claimer Oil Pan w/ Plug Combo, Hi-Vol. Pump, LH Dipstick
    Small Block Chevy Claimer Oil Pan w/ Plug Combo, Hi-Vol. Pump, LH Dipstick
    x
                

    Save money with our Claimer Pan Combos! For Small Block Chevy 1955-79 (driver side dipstick). Meets 2011 IMCA rules. Will not fit rear steer cars unless the engine has been moved back. Works with stock or mini starters.

    Kits include:

    • Claimer Oil Pan with 1" inspection plug (6 quart, 7-1/4" deep)
    • Oil Pump Pickup, 5/8" diameter 
    • High Volume Pump (55-65 psi preset)
  • Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
    Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
    x
                

    Thse high-volume oil pumps move 25% more volume than stock volume oil pumps. Pumps are preset to 55-65 psi. Fits Small Block Chevy.

  • AC Delco PF1218 Duraguard Engine Oil Filter, Chevy
    AC Delco PF1218 Duraguard Engine Oil Filter, Chevy
    x
                Protect your Chevy V8 engine with this premium quality oil filter. Outstanding filter capacity, enhanced efficiency, consistent flow management and high-durability design help provide exceptional filtering performance. 
    • 98% single-pass efficiency at 25-30 microns
    • Patented cellulose media traps particles 1/3 the width of a human hair
    • Designed with 5x greater burst strength than most engine oil operating pressures
  • SuperSeal Small Block Chevy Oil Pan Gaskets, 1969-1979 Blocks, One-Piece
    SuperSeal Small Block Chevy Oil Pan Gaskets, 1969-1979 Blocks, One-Piece
    x
                

    Small Block Chevy oil pan gasket by SuperSeal. 

    • Left Hand side ('55-'79) dipstick
    • For 2-piece rear main seal blocks
  • Moroso 20211 Chevy II 1955-1979 Small Block Oil Pan
    Moroso 20211 Chevy II 1955-1979 Small Block Oil Pan
    x
                

    If you are lucky enough to be putting together a '62-'67 Chevy II, you know the oil pan is a little bit special. These Moroso pans take the pain out of the engine install while giving it a better oiling system. Has a 6 quart capacity (not including filter).

    • Pick-up 54524120 or 54524122 is required for installation
    • Wet Sump, 9" Deep
    • Clears 3.80" stroke with most steel rods
    • Notched sump clears steering linkage
    • Compatible with most starter/flywheel combinations
    • Reduces oil temperature

    For cars without power steering. Pump pick-up NOT included but is available as noted below.

    Moroso Oil Pan Instructions (PDF)

  • Small Block Ford Crossmember Motor Mount
    Small Block Ford Crossmember Motor Mount
    x
                Universal mount allows 260-289-302-351W S/B Fords and 1970-1974 Cleveland engines with front sump oil pan to be installed into most frames up to 38" wide. Cut for frame width, then bolt or weld in.   

    Note: We've found a lot of variation in width of Ford blocks. Bolt the cushion to the block first to get proper width measurement. Mounts are not returnable once they've been altered or installed!

  • Moroso 26150 Chevy Distributor Shim Kit
    Moroso 26150 Chevy Distributor Shim Kit
    x
                

    Eliminates oil pump bind and spark scatter when using a distributor in an engine with milled heads or decks. Shims fit between the intake manifold and your distributor allowing you to properly set gear mesh. Made from leak-free, high impact nylon.

    • Eliminates oil pump bind and spark scatter 
    • Prevents wiping out your distributor gear
    • Made from high impact nylon to exact GM gasket specs
    • Kit contains 3 sizes; .030", .060" & .100"
  • Moroso 20212 Chevy II 1986-Up Small Block Oil Pan
    Moroso 20212 Chevy II 1986-Up Small Block Oil Pan
    x
                

    If you are lucky enough to be putting together a '62-'67 Chevy II, you know the oil pan is a little bit special. These Moroso pans take the pain out of the engine install while giving it a better oiling system. Has a 6 quart capacity (not including filter).

    • Pick-up 54524120 or 54524122 is required for installation
    • Wet Sump, 9" Deep
    • Clears 3.80" stroke with most steel rods
    • Notched sump clears steering linkage
    • Compatible with most starter/flywheel combinations
    • Reduces oil temperature

    For cars without power steering. Pump pick-up NOT included but is available as noted below.

    Moroso Oil Pan Instructions (PDF)

  • Moroso 38550 Small Block Chevy Oil Pan Self Locking Bolt Kit
    Moroso 38550 Small Block Chevy Oil Pan Self Locking Bolt Kit
    x
                

    Use these quality self locking oil pan bolts for small block and 90° V6 Chevy and Oldsmobile V8's. They feature integral serrated washer face to provide a self-locking effect.  Comes in a set of 18.

    • Small block and 90° V6 Chevy and Oldsmobile V8's
    • Integral serrated washer face provides self-locking effect
    • Set of 18
    • Grade 8 steel cadmium plated
  • 1986-Up Stock Raw Steel Small Block Chevy Oil Pan
    1986-Up Stock Raw Steel Small Block Chevy Oil Pan
    x
                

    These unplated, stock capacity oil pans are perfect for projects that don't need a chrome or aluminum pan.

    This oil pan is for a 1 piece rear main seal

    Now also available with inspection plug!

  • Moroso 21324 Circle Track Oil Pan w/ One Piece Rear Main Seal & Plug
    Moroso 21324 Circle Track Oil Pan w/ One Piece Rear Main Seal & Plug
    x
                

    Now you can have a Moroso oil pan for an affordable price. It features trap doors for oil control, removable windage tray, built-in crank scraper and accepts up to 3.800" stroke with steel rods. It's 7-1/2" deep, 11" wide and fits 78-87 Metric chassis and Camaro stubs. Fits small block Chevy.

    • Cost-effective Circle Track oil pan with Moroso quality and performance
    • Trap door baffles for oil control
    • Removable louvered windage tray
    • Built–in crankscraper
    • Accepts 3.80" stroke with steel rods
    • Accepts most starter and flywheel combinations
    • Will not fit engine blocks with splayed main caps
    • Accepts most starter and flywheel combinations
    • Will not fit engine blocks with splayed main caps
    • Has a 7 quart capacity (not including oil filter)
  • 1986-Up Small Block Chevy Aluminum Oil Pans
    1986-Up Small Block Chevy Aluminum Oil Pans
    x
                

    Fits Small Block Chevy. Polished aluminum oil pan, ribbed for beauty, strength and heat dissipation.

    This pan uses a passenger side dipstick and a one-piece rear main seal crankshaft. Includes drain plug and mounting bolts.

    They are 1 piece cast aluminum construction.

  • Moroso 22000 Small Block Chevy Oil Restrictors
    Moroso 22000 Small Block Chevy Oil Restrictors
    x
                

    Must drill and tap oil galleries under cam bearing. Sold as a kit. Oil Restrictor Kit. Small Block and Big Block Chevy engines, .060" orifice diameter. Oil delivery holes at rear cam bearing must be tapped to install. Includes 2 per kit.

    • Reduces oil flow to upper engine assembly, leaving more oil available for the rod and main bearings
    • Reduces power-robbing windage by reducing the volume of oil passing by the rotating assembly on its return to the pan
    • Do not use with hydraulic lifters

    545-22000 Instructions (PDF)

  • SuperSeal Small Block Chevy Oil Pan Gasket, 1980-1985 Blocks, One-Piece
    SuperSeal Small Block Chevy Oil Pan Gasket, 1980-1985 Blocks, One-Piece
    x
                

    Small Block Chevy oil pan gasket by SuperSeal. 

    • Right Hand side ('80-'85) dipstick
    • For 2-piece rear main seal blocks
  • Moroso 22090 Small Block Chevy Oil Pump Shaft for Big Block Oil Pump
    Moroso 22090 Small Block Chevy Oil Pump Shaft for Big Block Oil Pump
    x
                Use these oil pump shafts to upgrade the weak link in any wet sump system. With steel sleeve.
            
  • Moroso 21316 Circle Track Oil Pan, 1955-79 w/ Driver Side Dipstick
    Moroso 21316 Circle Track Oil Pan, 1955-79 w/ Driver Side Dipstick
    x
                

    Now you can have a Moroso oil pan for an affordable price. It features trap doors for oil control, removable windage tray, built-in crank scraper and accepts up to 3.800" stroke with steel rods. It's 7-1/2" deep, 11" wide and fits 78-87 Metric chassis and Camaro stubs. Fits small block Chevy.

    • Cost-effective Circle Track oil pan with Moroso quality and performance
    • Trap door baffles for oil control
    • Removable louvered windage tray
    • Built–in crankscraper
    • Accepts 3.80" stroke with steel rods
    • Accepts most starter and flywheel combinations
    • Will not fit engine blocks with splayed main caps
    • Accepts most starter and flywheel combinations
    • Will not fit engine blocks with splayed main caps
    • Has a 7 quart capacity (not including oil filter)
  • Moroso 23692 Chevy Oil Filter Adapter for Oil Cooler
    Moroso 23692 Chevy Oil Filter Adapter for Oil Cooler
    x
                
    • Engineered for plumbing a remote oil cooler for wet sump oiling systems
    • Fits SBC without modification and BBC Mark IV with minor block modifications
    • Eliminates need for a remote oil filter and associated plumbing hardware
    • Lowers oil filter by 1-1/2"
    • Equipped with 1/2" NPT inlet and outlet ports
    • Includes full instructions, mounting bolts and O-rings

    545-23692 Instructions (PDF)

  • SuperSeal Small Block Chevy Oil Pan Gasket, 1986-Up One-Piece
    SuperSeal Small Block Chevy Oil Pan Gasket, 1986-Up One-Piece
    x
                

    Small Block Chevy oil pan gasket by SuperSeal. 

    • 1986-Up one-piece
    • Approx 1/8" thick
    • Gray gasket w/ torque limiting washers
  • Speedway Small Block Chevy Stainless Engine Bolt Kit
    Speedway Small Block Chevy Stainless Engine Bolt Kit
    x
                

    This complete Allen head stainless steel engine fastener kit will resist corrosion caused by extreme under-hood environments, all while dressing up your engine. Fits '55-'86 Small Block Chevy engines.

    Kit includes:

    • Intake manifold bolts
    • Timing cover bolts
    • Oil pan bolts
    • Short water pump bolts
    • Long water pump bolts
    • TH350/400 transmission pan bolts
    • Exhaust header bolts
    • Water neck bolts, 1955-1965
    • Water neck bolts, 1966-1986
    • Flywheel cover bolts
  • Moroso 23845 Engine Save Pre-Filter Oil Filter Screen
    Moroso 23845 Engine Save Pre-Filter Oil Filter Screen
    x
                

    Stainless steel screen locates between the block and the oil filter to stop debris before it enters the filter element. Periodic inspections serve as early warning of engine failure. Fits S/B, B/B and 90° V-6 Chevy engines with spin-on oil filters. Does not affect oil pressure.

    • Unique stainless steel screen locates on top of spin-on oil filters to trap debris before it enters the filter element undetected
    • Particulate matter trapped in the screen and detected during periodic inspections serves as an "early warning signal" for impending engine failures
    • 304 stainless steel filtration-grade screen traps contaminants down to the 280 micron range without affecting oil flow or oil pressure
    • Crimped rings at both outside and inside diameters provide increased strength and extended durability
Goto Previous PagePrevious Page
1 2 3 4 5 ... 17