Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"small block chevy oil system" Page 1 of 5

  • Hy-Lube Small Block Chevy Oil Pump Block-Off Plate
    Hy-Lube Small Block Chevy Oil Pump Block-Off Plate
    x
                

    When running a dry sump oil system on your Small Block Chevy you should use this block-off plate on the rear main cap cover of the oil gallery.

    • Simulates torque loading
    • Anodized for protection
    • Hardware included
  • Dart 31161211 Special High Performance Chevy Block, 4.125 Inch Bore
    Dart 31161211 Special High Performance Chevy Block, 4.125 Inch Bore
    x
                

    Dart's Special High Performance (SHP) small-block meets the need for an affordable, precision-machined cast-iron block with superior features. Designed for high-performance and heavy-duty applications producing up to 600 horsepower, the SHP block is the ideal starting point for hot rodders, drag racers, circle track competitors, off-roaders, and high-performance marine enthusiasts. The SHP block as all the features needed without spending the big bucks and having to wait on your machine shop.

    • All new, precision machined
    • Cast from high nickel iron
    • Priority main oiling system
    • Siamese 4.125" bores
    • At 4.165" bore, .230" wall thickness
    • Clearance for 3.75" stroke w/ steel rods
    • Decks parallel within .002"
    • Made in USA
    • Blind head bolt holes
    • 350 main journals
    • Splayed 4-bolt center main caps
    • Two piece rear main seal
    • Accepts OEM roller rockers and cams
    • Uses 1981-85 oil pans & dipsticks
    • Accepts standard starters and bellhousings

    Dart SHP Block Instructions (PDF)

  • Small Block Chevy Oil Pump Shaft
    Small Block Chevy Oil Pump Shaft
    x
                Use these oil pump shafts to upgrade the weak link in any wet sump system. With steel sleeve. Works with stock or high volume pumps.
            
  • ARP Fasteners 230-7001 Small Block Chevy Oil Pump Studs
    ARP Fasteners 230-7001 Small Block Chevy Oil Pump Studs
    x
                For S/B Chevy only. Heat treated Chromoly steel. Comes with grade 8 nut and heat treated washer.
            
  • 1955-1979 Small Block Chevy Aluminum Oil Pan
    1955-1979 Small Block Chevy Aluminum Oil Pan
    x
                

    Polished, 1-piece cast aluminum finned oil pan, ribbed for beauty, strength and heat dissipation. This pan uses a drivers side dipstick. Includes drain plug and mounting bolts.

  • Small Block Chevy Oil Pan Stud Kit
    Small Block Chevy Oil Pan Stud Kit
    x
                The black finish grade 5 bolts have a Bullet tip to make installation easy. The zinc plated self-locking nuts give uniform clamping for a positive seal.
            
  • O-Ring Kit for Hy-Lube Chevy Oil Filter Adapter
    O-Ring Kit for Hy-Lube Chevy Oil Filter Adapter
    x
                

    Replacement O-ring seal kit for Hy-Lube remote oil filter block adapter #205-9910. Includes 2 bolts with washers and O-rings.

  • Small Block Chevy Oil Pan Bolt Kit, Chrome
    Small Block Chevy Oil Pan Bolt Kit, Chrome
    x
                

    Chrome oil pan bolt kit for Small Block Chevy (SBC). For use with steel oil pans ONLY. Will not fit cast aluminum oil pans.

    Kit includes:

    • (14) qty. 1/4"-20 x 1/2" hex head cap screws
    • (4) qty. 5/16"-18 x 5/8" hex head cap screws
    • (18) qty. flat washers 
  • Small Block Chevy Dipstick, 1955-1979
    Small Block Chevy Dipstick, 1955-1979
    x
                Stock type oil dipstick replacement for Small Block Chevy. Works with 1955-1979 blocks where the dipstick is on the driver's side.
            
  • 1955-79 Stock Raw Steel Small Block Chevy Oil Pan
    1955-79 Stock Raw Steel Small Block Chevy Oil Pan
    x
                

    These unplated, stock capacity oil pans are perfect for projects that don't need a chrome or aluminum pan.

    Now also available with inspection plug!

  • 1955-79 Small Block Chevy Chrome Oil Pans
    1955-79 Small Block Chevy Chrome Oil Pans
    x
                Chrome steel oil pan for 1955-79 small block Chevy with driver's side dipstick. Pan depth is 7". Center-to-center of the rear bolt holes is 5-13/16".

     
  • Pickup for High Volume Small Block Chevy Oil Pump
    Pickup for High Volume Small Block Chevy Oil Pump
    x
                

    Oil pump pickups are designed to work with our claimer pans. Includes mounting tab.

  • Small Block Chevy Claimer Oil Pan w/ Plug Combo, Hi-Vol. Pump, LH Dipstick
    Small Block Chevy Claimer Oil Pan w/ Plug Combo, Hi-Vol. Pump, LH Dipstick
    x
                

    Save money with our Claimer Pan Combos! For Small Block Chevy 1955-79 (driver side dipstick). Meets 2011 IMCA rules. Will not fit rear steer cars unless the engine has been moved back. Works with stock or mini starters.

    Kits include:

    • Claimer Oil Pan with 1" inspection plug (6 quart, 7-1/4" deep)
    • Oil Pump Pickup, 5/8" diameter 
    • High Volume Pump (55-65 psi preset)
  • Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
    Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
    x
                

    Thse high-volume oil pumps move 25% more volume than stock volume oil pumps. Pumps are preset to 55-65 psi. Fits Small Block Chevy.

  • Barnes Systems 9011 Small Block Chevy Oil Cooler Adapter
    Barnes Systems 9011 Small Block Chevy Oil Cooler Adapter
    x
                

    Connects directly to the oil cooler. Eliminates the need for a remote filter mount and a cooler adapter on the block. Designed to pass oil through filter before it goes to the cooler.

    Uses Chevy filters. AN 10 fittings. Fits Small Block Chevy.

  • Barnes Systems 9012 Small Block Chevy External Dry Sump Adapter
    Barnes Systems 9012 Small Block Chevy External Dry Sump Adapter
    x
                Provides oil from external dry sump oil pumps. With AN 10 fitting for supplying oil to the small block Chevy engine from the oil pump. Eliminates need to machine block for oil inlet fittings. Fits Small Block Chevy.
            
  • Barnes Systems 9003 Small Block Chevy 90 Degree Oil Filter Adapter
    Barnes Systems 9003 Small Block Chevy 90 Degree Oil Filter Adapter
    x
                

    Lets you use popular long-style Chevy oil filters by placing them at a 90 degree angle.

    • Provides greater ground clearance
    • Allows use of 2-quart truck oil filter 
    • Fits Small Block Chevy
  • Moroso 37800 Chevy Block Deck Plug Kit
    Moroso 37800 Chevy Block Deck Plug Kit
    x
                

    Reduce upper cylinder wall distortion by installing 3/4" NPT plugs in deck water passage holes of S/B Chevy V8 and 90° V6 Chevys. Machining necessary after installation. Makes water passage holes 5/16".

    • Reduces upper cylinder wall distortion
    • Water holes must be tapped before the plugs are screwed in
    • Block must also be decked after installation
    • Plugs also restrict water flow to the cylinder heads by reducing size of water passage holes to 5/16"
  • 1986-Up Stock Raw Steel Small Block Chevy Oil Pan
    1986-Up Stock Raw Steel Small Block Chevy Oil Pan
    x
                

    These unplated, stock capacity oil pans are perfect for projects that don't need a chrome or aluminum pan.

    This oil pan is for a 1 piece rear main seal

    Now also available with inspection plug!

  • Small Block Chevy Tight Fit Headers, AHC Coated
    Small Block Chevy Tight Fit Headers, AHC Coated
    x
                

    These AHC small-block Chevy tight fit headers are the most universal steel tube headers available. These performance headers fit difficult applications where space is limited. They are a favorite for street rods, as well as many 1950's and 1960's cars and vintage trucks. These ceramic coated headers provide superior performance and durability.

    Tight Tuck headers are the solution to many problems associated with engine swaps in modern street rods. Tight Tucks fit in the tightest of engine compartments and clear all stock motor mounts. Most headers are manufactured from durable 16-gauge tubing and comes complete with gaskets, header bolts and collector reducers.

    • Most tight fit header applications require the use of Accel shorty spark plugs
    • Round port
    • Compact design
    • Will NOT fit angle plug heads
    • Includes reducers, gaskets and bolts
    • Armor Hot Coat finish

    Header Dimensions (JPG)

  • Small Block Chevy Windage Tray, Plain Steel
    Small Block Chevy Windage Tray, Plain Steel
    x
                

    Screen style oil windage tray for S/B Chevy engines using a stock style pan with rear sump. Ready to install. Fits 2 or 4 bolt main blocks.

  • Moroso 38550 Small Block Chevy Oil Pan Self Locking Bolt Kit
    Moroso 38550 Small Block Chevy Oil Pan Self Locking Bolt Kit
    x
                

    Use these quality self locking oil pan bolts for small block and 90° V6 Chevy and Oldsmobile V8's. They feature integral serrated washer face to provide a self-locking effect.  Comes in a set of 18.

    • Small block and 90° V6 Chevy and Oldsmobile V8's
    • Integral serrated washer face provides self-locking effect
    • Set of 18
    • Grade 8 steel cadmium plated
  • Moroso 20211 Chevy II 1955-1979 Small Block Oil Pan
    Moroso 20211 Chevy II 1955-1979 Small Block Oil Pan
    x
                

    If you are lucky enough to be putting together a '62-'67 Chevy II, you know the oil pan is a little bit special. These Moroso pans take the pain out of the engine install while giving it a better oiling system. Has a 6 quart capacity (not including filter).

    • Pick-up 54524120 or 54524122 is required for installation
    • Wet Sump, 9" Deep
    • Clears 3.80" stroke with most steel rods
    • Notched sump clears steering linkage
    • Compatible with most starter/flywheel combinations
    • Reduces oil temperature

    For cars without power steering. Pump pick-up NOT included but is available as noted below.

    Moroso Oil Pan Instructions (PDF)

  • Billet Specialties 40120 Billet 1955-79 Small Block Chevy Dipstick
    Billet Specialties 40120 Billet 1955-79 Small Block Chevy Dipstick
    x
                

    Fits 1955-1979 Small Block Chevy blocks and replaces factory driver-side dip stick tube for a clean look (dipstick seats directly into the block). Polished billet aluminum construction with O-ring for a positive seal.

  • Dart 31161111 Special High Performance Chevy Block, 4.00 Inch Bore
    Dart 31161111 Special High Performance Chevy Block, 4.00 Inch Bore
    x
                

    Dart's Special High Performance (SHP) small-block meets the need for an affordable, precision-machined cast-iron block with superior features. Designed for high-performance and heavy-duty applications producing up to 600 horsepower, the SHP block is the ideal starting point for hot rodders, drag racers, circle track competitors, off-roaders, and high-performance marine enthusiasts. The SHP block as all the features needed without spending the big bucks and having to wait on your machine shop.

    • All new, precision machined
    • Cast from high nickel iron
    • Priority main oiling system
    • Siamese 4.000" bores
    • At 4.165" bore, .230" wall thickness
    • Clearance for 3.75" stroke w/ steel rods
    • Decks parallel within .002"
    • Made in USA
    • Blind head bolt holes
    • 350 main journals
    • Splayed 4-bolt center main caps
    • Two piece rear main seal
    • Accepts OEM roller rockers and cams
    • Uses 1981-85 oil pans & dipsticks
    • Accepts standard starters and bellhousings

    Dart SHP Block Instructions (PDF)

  • Moroso 22090 Small Block Chevy Oil Pump Shaft for Big Block Oil Pump
    Moroso 22090 Small Block Chevy Oil Pump Shaft for Big Block Oil Pump
    x
                Use these oil pump shafts to upgrade the weak link in any wet sump system. With steel sleeve.
            
  • Champ Pans CP150R12 1957-85 Small Block Chevy Dry Sump Oil Pan
    Champ Pans CP150R12 1957-85 Small Block Chevy Dry Sump Oil Pan
    x
                

    For dry sump oil systems on 1957-1985 small block Chevys. Made from rugged steel to last. Features two crank scrapers and a removable horsepower saving louvered windage screen which will give maximum oil flow to the pickups.

    Has two -12 AN fittings on the passenger side. Measures 4-1/2" deep. Will work with stock or mini starters.

  • Deluxe Hi-Volume Small Block Chevy Oil Pump
    Deluxe Hi-Volume Small Block Chevy Oil Pump
    x
                

    This oil pump has all it's components hand picked and fit to make it the best. The nickel body and end plate have been machined to balance the pressure at all rpm's which also reduces cavitation and increases longevity. Includes three pressure springs and a steel oil pump driveshaft sleeve.

    For Small Block Chevy V-8. Use 5/8" pick-up tube.

  • Small Block Chevy Aluminum Windage Tray
    Small Block Chevy Aluminum Windage Tray
    x
                

    Bolt-in replacement, louvered windage tray for S/B Chevy champ style pan. Add horsepower and lower oil temperatures.

    Works great with pan 91015108 when replacing the steel plate bolted to the bottom of the pan.

    Fits in pan 91015137 but there is no way to attach the tray. Will need to come up with a way to mount it in the pan.

    Fits with pan 91015106 but it doesn't fit the existing bolt pattern and would require a new way to mount as well as removing the studs in the pan.

    Note: Not applicable to # 91015104 champ style pan.

  • Moroso 23692 Chevy Oil Filter Adapter for Oil Cooler
    Moroso 23692 Chevy Oil Filter Adapter for Oil Cooler
    x
                
    • Engineered for plumbing a remote oil cooler for wet sump oiling systems
    • Fits SBC without modification and BBC Mark IV with minor block modifications
    • Eliminates need for a remote oil filter and associated plumbing hardware
    • Lowers oil filter by 1-1/2"
    • Equipped with 1/2" NPT inlet and outlet ports
    • Includes full instructions, mounting bolts and O-rings

    545-23692 Instructions (PDF)

  • 1986-Up Small Block Chevy Aluminum Oil Pans
    1986-Up Small Block Chevy Aluminum Oil Pans
    x
                

    Fits Small Block Chevy. Polished aluminum oil pan, ribbed for beauty, strength and heat dissipation.

    This pan uses a passenger side dipstick and a one-piece rear main seal crankshaft. Includes drain plug and mounting bolts.

    They are 1 piece cast aluminum construction.

  • 1980-1985 Small Block Chevy Aluminum Oil Pans
    1980-1985 Small Block Chevy Aluminum Oil Pans
    x
                

    Fits Small Block Chevy. Polished aluminum oil pan, ribbed for beauty, strength and heat dissipation.

    This pan uses a passenger side dipstick. Includes drain plug and mounting bolts.

    They are 1 piece cast aluminum construction.
  • GM Performance 12499529 Small Block Chevy 350/290 Long Block Engine
    GM Performance 12499529 Small Block Chevy 350/290 Long Block Engine
    x
                Please view the product's page for more information
            
  • Hi-Volume Small Block Chevy Claimer Oil Pan Combo, LH Side Dipstick
    Hi-Volume Small Block Chevy Claimer Oil Pan Combo, LH Side Dipstick
    x
                

    Save money with our Claimer Pan Combos! For Small Block Chevy 1955-79 (driver side dipstick). Will not fit rear steer cars unless the engine has been moved back. Works with stock or mini starters.

    Kits include:

    • Claimer Oil Pan (6 quart, 7-1/4" deep)
    • Oil Pump Pickup, 5/8" diameter 
    • Stock Volume Pump or High Volume Pump (both 55-65 psi preset)
  • Champ Pans CP50 1957-79 Small Block Chevy Race Oil Pan, LH Dipstick
    Champ Pans CP50 1957-79 Small Block Chevy Race Oil Pan, LH Dipstick
    x
                

    These small block Chevy oil pans work great for street, strip, road racing, and circle tracks. They feature a 7-3/4" deep pan with one large trap door, one crank scraper and two runners. The oil capacity is 7 quarts with a filter attached. Will work with stock size starters.

  • Melling 10050-700CT Billet Small Block Chevy Oil Pump, Circle Track
    Melling 10050-700CT Billet Small Block Chevy Oil Pump, Circle Track
    x
                

    These billet aluminum oil pumps will give you a serious advantage over the competition. Not only do they provide a smoother oil flow through the pump, they give you 5-6 HP and have the pickup built right in.

    • 25% increase in volume over stock oil pump
    • Lightweight billet 6061-T6 aluminum housing & cover
    • Protective hard-anodized coating on housing & gears
    • Chromoly steel driveshaft
    • Integrated stainless mesh pickup screen
    • Has multiple pressure settings
    • Supercharged inlet allows for improved performance at high RPMs

    Includes 12550 chromoly intermediate shaft, stud kit and +10# and -10# relief springs.

  • Melling 10050-825SS Billet Small Block Chevy Oil Pump, Drag Race
    Melling 10050-825SS Billet Small Block Chevy Oil Pump, Drag Race
    x
                

    These billet aluminum oil pumps will give you a serious advantage over the competition. Not only do they provide a smoother oil flow through the pump, they give you 5-6 HP and have the pickup built right in. 

    Includes 12550 chrome moly intermediate shaft, stud kit and +10# and -10# relief springs.

    • 25% increase in volume over stock oil pump
    • Lightweight billet 6061-T6 aluminum housing & cover
    • Protective hard-anodized coating on housing & gears
    • Chromoly steel driveshaft
    • Integrated stainless mesh pickup screen
    • Has multiple pressure settings
    • Supercharged inlet allows for improved performance at high RPMs
  • 1980-'85 Stock Raw Steel Small Block Chevy Oil Pan
    1980-'85 Stock Raw Steel Small Block Chevy Oil Pan
    x
                

    These unplated, stock capacity oil pans are perfect for projects that don't need a chrome or aluminum pan.

    Now also available with inspection plug!

  • 1955-79 Raw Steel Small Block Chevy Oil Pan w/ Inspection Plug
    1955-79 Raw Steel Small Block Chevy Oil Pan w/ Inspection Plug
    x
                

    These unplated, stock capacity oil pans are perfect for projects that don't need a chrome or aluminum pan.

    Comes with inspection plug.

  • 1980-85 Raw Steel Small Block Chevy Oil Pan w/ Inspection Plug
    1980-85 Raw Steel Small Block Chevy Oil Pan w/ Inspection Plug
    x
                

    These unplated, stock capacity oil pans are perfect for projects that don't need a chrome or aluminum pan.

    Comes with inspection plug.

Goto Previous PagePrevious Page
1 2 3 4 5