Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"small block chevy oil sump" Page 1 of 3

  • Hy-Lube Small Block Chevy Oil Pump Block-Off Plate
    Hy-Lube Small Block Chevy Oil Pump Block-Off Plate
    x
                

    When running a dry sump oil system on your Small Block Chevy you should use this block-off plate on the rear main cap cover of the oil gallery.

    • Simulates torque loading
    • Anodized for protection
    • Hardware included
  • Small Block Chevy Oil Pump Shaft
    Small Block Chevy Oil Pump Shaft
    x
                Use these oil pump shafts to upgrade the weak link in any wet sump system. With steel sleeve. Works with stock or high volume pumps.
            
  • 1955-1979 Small Block Chevy Aluminum Oil Pan
    1955-1979 Small Block Chevy Aluminum Oil Pan
    x
                

    Polished, 1-piece cast aluminum finned oil pan, ribbed for beauty, strength and heat dissipation. This pan uses a drivers side dipstick. Includes drain plug and mounting bolts.

  • 1955-79 Stock Raw Steel Small Block Chevy Oil Pan
    1955-79 Stock Raw Steel Small Block Chevy Oil Pan
    x
                

    These unplated, stock capacity oil pans are perfect for projects that don't need a chrome or aluminum pan.

    Now also available with inspection plug!

  • 1955-79 Small Block Chevy Chrome Oil Pans
    1955-79 Small Block Chevy Chrome Oil Pans
    x
                Chrome steel oil pan for 1955-79 small block Chevy with driver's side dipstick. Pan depth is 7". Center-to-center of the rear bolt holes is 5-13/16".

     
  • Moroso 20211 Chevy II 1955-1979 Small Block Oil Pan
    Moroso 20211 Chevy II 1955-1979 Small Block Oil Pan
    x
                

    If you are lucky enough to be putting together a '62-'67 Chevy II, you know the oil pan is a little bit special. These Moroso pans take the pain out of the engine install while giving it a better oiling system. Has a 6 quart capacity (not including filter).

    • Pick-up 54524120 or 54524122 is required for installation
    • Wet Sump, 9" Deep
    • Clears 3.80" stroke with most steel rods
    • Notched sump clears steering linkage
    • Compatible with most starter/flywheel combinations
    • Reduces oil temperature

    For cars without power steering. Pump pick-up NOT included but is available as noted below.

    Moroso Oil Pan Instructions (PDF)

  • Champ Pans CP150R12 1957-85 Small Block Chevy Dry Sump Oil Pan
    Champ Pans CP150R12 1957-85 Small Block Chevy Dry Sump Oil Pan
    x
                

    For dry sump oil systems on 1957-1985 small block Chevys. Made from rugged steel to last. Features two crank scrapers and a removable horsepower saving louvered windage screen which will give maximum oil flow to the pickups.

    Has two -12 AN fittings on the passenger side. Measures 4-1/2" deep. Will work with stock or mini starters.

  • Barnes Systems 9012 Small Block Chevy External Dry Sump Adapter
    Barnes Systems 9012 Small Block Chevy External Dry Sump Adapter
    x
                Provides oil from external dry sump oil pumps. With AN 10 fitting for supplying oil to the small block Chevy engine from the oil pump. Eliminates need to machine block for oil inlet fittings. Fits Small Block Chevy.
            
  • Moroso 20212 Chevy II 1986-Up Small Block Oil Pan
    Moroso 20212 Chevy II 1986-Up Small Block Oil Pan
    x
                

    If you are lucky enough to be putting together a '62-'67 Chevy II, you know the oil pan is a little bit special. These Moroso pans take the pain out of the engine install while giving it a better oiling system. Has a 6 quart capacity (not including filter).

    • Pick-up 54524120 or 54524122 is required for installation
    • Wet Sump, 9" Deep
    • Clears 3.80" stroke with most steel rods
    • Notched sump clears steering linkage
    • Compatible with most starter/flywheel combinations
    • Reduces oil temperature

    For cars without power steering. Pump pick-up NOT included but is available as noted below.

    Moroso Oil Pan Instructions (PDF)

  • Holley 302-1 LS Series Retro-fit Oil Pan
    Holley 302-1 LS Series Retro-fit Oil Pan
    x
                

    GM's popular LS engines are finding their way into a large variety of vehicles. They make great power, plus they're very durable and reliable. Unfortunately, the factory LS pans don't always fit or they hang too low for today's hot rods. Holley's new LS Retro–fit Engine Oil Pan is designed to help! It provides maximum clearance to the chassis and ground, plus provides an OEM fitment for durability and proper sealing.

    • Provides OEM fitment– OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity and OEM bell-housing attachments
    • Traditional high-quality cast aluminum appearance with clean exterior styling
    • Provides maximum clearance to chassis
    • Cast and machined aluminum
    • Complete kit including sump baffle, pick-up tube, sump plug & oil filter stud
    • Fits GM rear wheel drive applications that were originally equipped with a Small Block or Big Block Chevy engine and traditional rear sump oil pan*

    Holley Oil Pan Installation Instructions (PDF)

    Specs Chart (GIF)

  • Champ Pans CP150KO 1957-85 Small Block Chevy Dry Sump Pan with Kickout
    Champ Pans CP150KO 1957-85 Small Block Chevy Dry Sump Pan with Kickout
    x
                

    For dry sump systems on 1957-85 small block Chevys. Measures 4-1/4" deep. Kickout runs length of pan for increased oil control and torque. It also has two crank scrapers and a removable horsepower saving windage screen that will give maximum oil flow to the pickups.

    Has two -12 AN fittings on the passenger side only. Must use aftermarket mini-starter.

  • 1986-Up Stock Raw Steel Small Block Chevy Oil Pan
    1986-Up Stock Raw Steel Small Block Chevy Oil Pan
    x
                

    These unplated, stock capacity oil pans are perfect for projects that don't need a chrome or aluminum pan.

    This oil pan is for a 1 piece rear main seal

    Now also available with inspection plug!

  • Moroso 23692 Chevy Oil Filter Adapter for Oil Cooler
    Moroso 23692 Chevy Oil Filter Adapter for Oil Cooler
    x
                
    • Engineered for plumbing a remote oil cooler for wet sump oiling systems
    • Fits SBC without modification and BBC Mark IV with minor block modifications
    • Eliminates need for a remote oil filter and associated plumbing hardware
    • Lowers oil filter by 1-1/2"
    • Equipped with 1/2" NPT inlet and outlet ports
    • Includes full instructions, mounting bolts and O-rings

    545-23692 Instructions (PDF)

  • 1986-Up Small Block Chevy Aluminum Oil Pans
    1986-Up Small Block Chevy Aluminum Oil Pans
    x
                

    Fits Small Block Chevy. Polished aluminum oil pan, ribbed for beauty, strength and heat dissipation.

    This pan uses a passenger side dipstick and a one-piece rear main seal crankshaft. Includes drain plug and mounting bolts.

    They are 1 piece cast aluminum construction.

  • 1980-1985 Small Block Chevy Aluminum Oil Pans
    1980-1985 Small Block Chevy Aluminum Oil Pans
    x
                

    Fits Small Block Chevy. Polished aluminum oil pan, ribbed for beauty, strength and heat dissipation.

    This pan uses a passenger side dipstick. Includes drain plug and mounting bolts.

    They are 1 piece cast aluminum construction.
  • Moroso 22090 Small Block Chevy Oil Pump Shaft for Big Block Oil Pump
    Moroso 22090 Small Block Chevy Oil Pump Shaft for Big Block Oil Pump
    x
                Use these oil pump shafts to upgrade the weak link in any wet sump system. With steel sleeve.
            
  • Ultimate Small Block Chevy Steel Wet Sump Oil Pan
    Ultimate Small Block Chevy Steel Wet Sump Oil Pan
    x
                If you are running a serious small block Chevy in either a modified or sprint car you will need to step-up to this pan. At 7" deep it will still fit most applications, but has additional gates and scrapers to control the oil better. Must be used with a mini style starter.
            
  • Champ Pans CP40 1957-79 S/B Chevy Stock Appearing Oil Pan, LH Dipstick
    Champ Pans CP40 1957-79 S/B Chevy Stock Appearing Oil Pan, LH Dipstick
    x
                This stock appearing street oil pan features a 7-1/2" deep rear sump and has one 6" trapdoor, one crank scraper, and a removable horsepower saving windage tray. The oil capacity is 5 quarts with a filter attached.
            
  • Champ Pans CP50 1957-79 Small Block Chevy Race Oil Pan, LH Dipstick
    Champ Pans CP50 1957-79 Small Block Chevy Race Oil Pan, LH Dipstick
    x
                

    These small block Chevy oil pans work great for street, strip, road racing, and circle tracks. They feature a 7-3/4" deep pan with one large trap door, one crank scraper and two runners. The oil capacity is 7 quarts with a filter attached. Will work with stock size starters.

  • 1980-'85 Stock Raw Steel Small Block Chevy Oil Pan
    1980-'85 Stock Raw Steel Small Block Chevy Oil Pan
    x
                

    These unplated, stock capacity oil pans are perfect for projects that don't need a chrome or aluminum pan.

    Now also available with inspection plug!

  • Hi-Volume Small Block Chevy Claimer Oil Pan Combo, LH Side Dipstick
    Hi-Volume Small Block Chevy Claimer Oil Pan Combo, LH Side Dipstick
    x
                

    Save money with our Claimer Pan Combos! For Small Block Chevy 1955-79 (driver side dipstick). Will not fit rear steer cars unless the engine has been moved back. Works with stock or mini starters.

    Kits include:

    • Claimer Oil Pan (6 quart, 7-1/4" deep)
    • Oil Pump Pickup, 5/8" diameter 
    • Stock Volume Pump or High Volume Pump (both 55-65 psi preset)
  • 1955-79 Raw Steel Small Block Chevy Oil Pan w/ Inspection Plug
    1955-79 Raw Steel Small Block Chevy Oil Pan w/ Inspection Plug
    x
                

    These unplated, stock capacity oil pans are perfect for projects that don't need a chrome or aluminum pan.

    Comes with inspection plug.

  • 1980-85 Raw Steel Small Block Chevy Oil Pan w/ Inspection Plug
    1980-85 Raw Steel Small Block Chevy Oil Pan w/ Inspection Plug
    x
                

    These unplated, stock capacity oil pans are perfect for projects that don't need a chrome or aluminum pan.

    Comes with inspection plug.

  • Moroso 21324 Circle Track Oil Pan w/ One Piece Rear Main Seal & Plug
    Moroso 21324 Circle Track Oil Pan w/ One Piece Rear Main Seal & Plug
    x
                

    Now you can have a Moroso oil pan for an affordable price. It features trap doors for oil control, removable windage tray, built-in crank scraper and accepts up to 3.800" stroke with steel rods. It's 7-1/2" deep, 11" wide and fits 78-87 Metric chassis and Camaro stubs. Fits small block Chevy.

    • Cost-effective Circle Track oil pan with Moroso quality and performance
    • Trap door baffles for oil control
    • Removable louvered windage tray
    • Built–in crankscraper
    • Accepts 3.80" stroke with steel rods
    • Accepts most starter and flywheel combinations
    • Will not fit engine blocks with splayed main caps
    • Accepts most starter and flywheel combinations
    • Will not fit engine blocks with splayed main caps
    • Has a 7 quart capacity (not including oil filter)
  • 1986-Up Small Block Chevy Chrome Oil Pan
    1986-Up Small Block Chevy Chrome Oil Pan
    x
                Chrome steel oil pan for '86-newer Chevy blocks which have the dipstick on the passenger's side. Center-to-center for the rear bolt holes is 6-9/16".  The half-moon dip at the back of the pan is 2-3/8" deep and 5-1/4" wide. Pan is 8" deep at its lowest point.
            
  • 1980-1985 Small Block Chevy Chrome Oil Pan
    1980-1985 Small Block Chevy Chrome Oil Pan
    x
                

    This chrome steel oil pan fits '80-'85 Small Block Chevy V8s with a passenger side (RH) dipstick. 

    Note: Center-to-center of rear bolt holes is 5-3/4". 

  • Moroso 21316 Circle Track Oil Pan, 1955-79 w/ Driver Side Dipstick
    Moroso 21316 Circle Track Oil Pan, 1955-79 w/ Driver Side Dipstick
    x
                

    Now you can have a Moroso oil pan for an affordable price. It features trap doors for oil control, removable windage tray, built-in crank scraper and accepts up to 3.800" stroke with steel rods. It's 7-1/2" deep, 11" wide and fits 78-87 Metric chassis and Camaro stubs. Fits small block Chevy.

    • Cost-effective Circle Track oil pan with Moroso quality and performance
    • Trap door baffles for oil control
    • Removable louvered windage tray
    • Built–in crankscraper
    • Accepts 3.80" stroke with steel rods
    • Accepts most starter and flywheel combinations
    • Will not fit engine blocks with splayed main caps
    • Accepts most starter and flywheel combinations
    • Will not fit engine blocks with splayed main caps
    • Has a 7 quart capacity (not including oil filter)
  • Small Block Chevy Windage Tray, Plain Steel
    Small Block Chevy Windage Tray, Plain Steel
    x
                

    Screen style oil windage tray for S/B Chevy engines using a stock style pan with rear sump. Ready to install. Fits 2 or 4 bolt main blocks.

  • 1980-'85 Small Block Chevy Raw Oil Pan, Right Side Dipstick
    1980-'85 Small Block Chevy Raw Oil Pan, Right Side Dipstick
    x
                1980-'85 small block chevy raw oil pan with right hand side dipstick.
            
  • 1955-79 Small Block Chevy Raw Oil Pan, Left Side Dipstick
    1955-79 Small Block Chevy Raw Oil Pan, Left Side Dipstick
    x
                

    These raw oil pans with left hand side dipstick are perfect for building your own custom claimer race pan.  Just purchase our claimer pan kit separately and assemble the kit to fit these oil pans.  These oil pans are designed for use with 1955-1979 small block chevy applications.

    • Works for street, strip, road race, and circle tracks
    • Stock style oil pan for use with claimer pan kit
    • Raw finish
    • 1955-79 small block Chevy
    • Left hand side dipstick

    Be sure include our claimer pan kit (91715900) with these raw pans for a custom built claimer race pan.

  • Champ Pans CP50R 1979-86 Small Block Chevy Race Oil Pan, RH Dipstick
    Champ Pans CP50R 1979-86 Small Block Chevy Race Oil Pan, RH Dipstick
    x
                

    These small block Chevy oil pans work great for street, strip, road racing, and circle tracks. They feature a 7-3/4" deep pan with one large trap door, one crank scraper and two runners. The oil capacity is 7 quarts with a filter attached. Will work with stock size starters.

  • Champ Pans CP50RB 1986-Up Small Block Chevy Race Oil Pan, 1-Piece Main
    Champ Pans CP50RB 1986-Up Small Block Chevy Race Oil Pan, 1-Piece Main
    x
                

    These small block Chevy oil pans work great for street, strip, road racing, and circle tracks. They feature a 7-3/4" deep pan with one large trap door, one crank scraper and two runners. The oil capacity is 7 quarts with a filter attached. Will work with stock size starters.

  • Moroso 25000 Small Block Chevy Oil Gallery Screen Kit
    Moroso 25000 Small Block Chevy Oil Gallery Screen Kit
    x
                

    Includes 8 plugs that redirect oil to the front and rear return galleries. Returns oil to sump area.

    • Inexpensive engine insurance
    • Traps metal fragments or loose components resulting from valvetrain failure before reaching vital engine parts
    • Stainless steel mesh screens are fitted over holes in lifter gallery with supplied epoxy
  • Moroso 21322 Oval Track Oil Pan, 1955-1979 Driver Side Dipstick
    Moroso 21322 Oval Track Oil Pan, 1955-1979 Driver Side Dipstick
    x
                Now you can have a Moroso oil pan for an affordable price. It features trap doors for oil control, removable windage tray, built-in crank scraper and accepts up to 3.800" stroke with steel rods. It's 7-1/2" deep, 11" wide and fits 78-87 Metric chassis and Camaro stubs. Fits small block Chevy. Also has 1" Inspection plug.

    Has a 7 quart capacity.
  • Champ Pans CP100RB 1986-Up Small Block Chevy Oil Pan, 1-Piece Main
    Champ Pans CP100RB 1986-Up Small Block Chevy Oil Pan, 1-Piece Main
    x
                

    Champ-style pan for 1986-Up small block Chevy. This pan is designed around the Camaro front stub with engine set back. Measures 7" deep with 6 trap doors, 2 runners, 3 crank scrapers, and a 8 quart capacity (including filter). Stock starter will fit.

    Measures 7" deep x 14" wide x 12" long.

  • Speedway Small Block Chevy Claimer Oil Pan, RH Dipstick
    Speedway Small Block Chevy Claimer Oil Pan, RH Dipstick
    x
                

    These claimer series oil pans are our best selling circle track pans. This low cost, high quality pan designed for the budget racer. Six quart capacity, 7-1/4" deep with two gates for oil flow control. Fits with stock or mini starter. Will not fit rear steer cars unless the engine has been moved back.

    • Vertical half moon notch in the rear near the drain plug is 1" from the rear corner, 1" wide and 5/8" deep. This notch is on the passenger side at rear.
    • Drain plug is on the passenger side, approximately 1" from the rear corner to center

    Small Block Chevy Claimer Oil Pan Installation Instructions (PDF)

  • Barnes Systems 9017-3B SBC 3 Stage Dry Sump Pump
    Barnes Systems 9017-3B SBC 3 Stage Dry Sump Pump
    x
                Barnes belt driven pumps are built using only the finest materials and assembled to  exacting tolerances. Unique design makes these pumps the smoothest and  most efficient pumps in the industry. Billet aluminum bodies, large  O.D. spur gears and ball bearings make for a winning combination.

    Fuel pump drive kit allows a Hilborn Waterman, etc. fuel pump to drive off the back of the oil pump.
  • Champ Pans CP40R 1979-85 S/B Chevy Stock Appearing Oil Pan-RH Dipstick
    Champ Pans CP40R 1979-85 S/B Chevy Stock Appearing Oil Pan-RH Dipstick
    x
                This stock appearing street oil pan features a 7-1/2" deep rear sump and has one 6" trapdoor, one crank scraper, and a removable horsepower saving windage tray. The oil capacity is 5 quarts with a filter attached.
            
  • Speedway Small Block Chevy Claimer Oil Pan, LH Dipstick
    Speedway Small Block Chevy Claimer Oil Pan, LH Dipstick
    x
                

    These claimer series oil pans are our best selling circle track pans. This low cost, high quality pan designed for the budget racer. Six quart capacity, 7-1/4" deep with two gates for oil flow control. Fits with stock or mini starter. Will not fit rear steer cars unless the engine has been moved back.

    917-15120 Instructions (PDF)

  • Competition Components WL-7-RS-INSP 1980-85 Small Block Chevy Skid Oil Pan
    Competition Components WL-7-RS-INSP 1980-85 Small Block Chevy Skid Oil Pan
    x
                Comes with extra tough skid plate installed. 7 quart capacity, gold irridated wet sump pan for S/B Chevy street stocks and sprints. Helps eliminate oil problems. Includes windage tray and baffles. 

    Pan is 13" wide and 7" deep.

Goto Previous PagePrevious Page
1 2 3