Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"small block chevy manifolds" Page 1 of 5

  • Edelbrock 2701 Performer EPS Chevy Intake Manifold
    Edelbrock 2701 Performer EPS Chevy Intake Manifold
    x
                

    Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance over other low-rise dual plane manifolds. This small-block Chevy manifold has a runner design that's "tuned" for peak torque around 3500 rpm on a 350-inch engine and it produces power from off-idle to 5500 rpm.

    Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the standard Performer manifold on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most.

    IMCA racing approved.

    325-2701 Instructions (PDF)

  • Edelbrock 2101 Performer 1955-86 Small Block Chevy Intake Manifold
    Edelbrock 2101 Performer 1955-86 Small Block Chevy Intake Manifold
    x
                

    Edelbrock's famous Performer manifold is designed for street 1955-86 small block Chevys. This manifold is a stock replacement/street legal part for 302/327/350 V8s with OEM 4 bbl. or Edelbrock Performer Series carbs. Will also work on 1966-72 (1973 non-California) cars, 1966-83 trucks and Suburbans; except stock equipped EGR.

    Performers accept late-model choke, waterneck, air-conditioning, alternator and H.E.I. Not for 1987 and later cast iron or Chevy Bowtie heads. Will fit 1987 and later stock aluminum heads. 

    Made in the U.S.A. 

    325-2101 Instructions (PDF)

    NOTE: This intake does not work with kickdown kit 491-2350U.

  • Edelbrock 27014 Performer EPS Chevy Intake Manifold-Endurashine Finish
    Edelbrock 27014 Performer EPS Chevy Intake Manifold-Endurashine Finish
    x
                

    Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance over other low-rise dual plane manifolds. This small-block Chevy manifold has a runner design that's "tuned" for peak torque around 3500 rpm on a 350-inch engine and it produces power from off-idle to 5500 rpm.

    Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the standard Performer manifold on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most. Match with a dependable Edelbrock square-bore carburetor for maximum street performance gains.

    325-27014 Instructions (PDF)

  • Fel-Pro Gaskets 1205 S/B Chevy Intake Manifold Gaskets, 1.28x2.09 Inch
    Fel-Pro Gaskets 1205 S/B Chevy Intake Manifold Gaskets, 1.28x2.09 Inch
    x
                Fel-Pro Blue Stripe premium quality intake manifold gaskets for Small Block Chevy (SBC).
            
  • Fel-Pro Gaskets 1206 S/B Chevy Intake Manifold Gaskets, 1.34x2.21 Inch
    Fel-Pro Gaskets 1206 S/B Chevy Intake Manifold Gaskets, 1.34x2.21 Inch
    x
                Fel-Pro Blue Stripe premium quality intake manifold gaskets for Small Block Chevy (SBC).
            
  • Speedway Small Block Chevy Stainless Engine Bolt Kit
    Speedway Small Block Chevy Stainless Engine Bolt Kit
    x
                

    This complete Allen head stainless steel engine fastener kit will resist corrosion caused by extreme under-hood environments, all while dressing up your engine. Fits '55-'86 Small Block Chevy engines.

    Kit includes:

    • Intake manifold bolts
    • Timing cover bolts
    • Oil pan bolts
    • Short water pump bolts
    • Long water pump bolts
    • TH350/400 transmission pan bolts
    • Exhaust header bolts
    • Water neck bolts, 1955-1965
    • Water neck bolts, 1966-1986
    • Flywheel cover bolts
  • Professional Products Cyclone Small Block Chevy Intake Manifold
    Professional Products Cyclone Small Block Chevy Intake Manifold
    x
                

    The Power+Plus Cyclone Manifold is a direct replacement for the stock manifold on 1957-’95 Small Block Chevy non-EGR engines. Includes special adapter bushings to fit ’87-’95 engines. Use the stock Quadra-Jet carb or 500-650 cfm vacuum secondary carburetor. Kit includes adapter plate to permit use of certain square bore style carburetors. Power+Plus Manifolds are cast from steel molds, not from sand molds. Permanent molds provide a tighter grain casting thereby reducing the occurrence of porosity which can mar the polished finish. Additionally, each Power+Plus Manifold is 100% pressure tested for leaks to eliminate installation problems. This is our most popular manifold and is showing up on many performance street machines and street rods.

    RPM range is idle to 5500.  Availabe in plain or show polished.

    NOTES: Manifold includes adaptor bushings to also fit 1987-1995 iron or aluminum heads.  Polished intakes have EGR ports with block plates.

     

     

  • Edelbrock 2999 Tall Victor Jr. Small Block Chevy Manifold
    Edelbrock 2999 Tall Victor Jr. Small Block Chevy Manifold
    x
                

    Designed for competition Small Block Chevy V8s used in all forms of racing, the Victor Jr. Tall intake manifold incorporates Edelbrock's extensive knowledge in induction technology. Victor Jr. Series manifolds provide excellent mid-range to top-end horsepower, resulting in race-winning performance. All Victor Jr. manifolds offer extra material added for port matching and customizing, square bore carburetor flange, and water crossovers drilled and tapped for temp senders/bypass holes.

    Use the Victor Jr. Tall for the 3500-8000 RPM range when carburetor spacers are not allowed. This manifold is 1" taller than the regular Victor Jr. (at right) and also provides maximum performance for engines with standard port location, iron and aluminum cylinder heads.

    Small Block Chevy Intake Manifold Installation Instructions (PDF)

  • Corvette-Style 2-1/2 Inch Ram Horn Exhaust Manifolds, Pair
    Corvette-Style 2-1/2 Inch Ram Horn Exhaust Manifolds, Pair
    x
                

    These "rams horn" cast iron manifolds were patterned off the 1962-63 327 Corvette but are not OEM remanufactured manifolds. They feature the big 2-1/2" diameter outlets and have provisions to accept original alternator type brackets.

    These headers are copies of the original headers on the 62-63 Corvettes and can be used on almost any small block application. The cast in brackets are for the water tank on the drivers side and generator bracket on the passenger side. These can be cut off and smoothed per customers preference. These are a square port configuration with 1-5/16” top to bottom and also side to side. Compare to your head port size for compatibility.

    • 1962-63 327 Corvette
    • 2-1/2" diameter outlets
    • 1-5/16" square ports
    • Use on almost any small block application up until the advent of the LS series engines in 1999
    • Use with 3 bolt header reducer/collector
    • Includes (1) left and (1) right side manifold
    • Gaskets and bolts/hardware are not included
  • Small Block Chevy Intake Bolt Kits
    Small Block Chevy Intake Bolt Kits
    x
                A bolt kit for S/B Chevy intakes. All feature that unique King Chrome premium chrome plating.
            
  • Tru-Ram   Small Block Chevy Exhaust Manifolds, Cast Iron
    Tru-Ram Small Block Chevy Exhaust Manifolds, Cast Iron
    x
                

    If you're looking for the power of headers, a distinctive look and the dependability of cast iron, we have the hot setup for small-block Chevys: the Tru-Ram® exhaust manifold. We started with a clean slate and designed an exhaust manifold that will give you looks and performance never before available in cast iron.

    • Provides a tight-fit for steering and clearance issues
    • Flows better than original Corvette manifolds
    • Same performance as tube headers with classic ram horn styling
    • Offers a distinctive look
    • 2-1/2" collector uses standard reducers or tight tube extensions
    • Includes mounting hardware and gaskets
    • Tru-Ram Dimension Chart (GIF)

    Header Dimension Chart

    Note: The exhaust port size is square and large enough for most round port heads. It measures 1.375" x 1.375" and should be sufficient for most small block cylinder heads. Variation in location of spark plugs on aftermarket heads makes it impossible to verify that the Tru-Ram® will fit all heads on the market, but it will clear most straight and angle plug heads.

  • Moroso 26150 Chevy Distributor Shim Kit
    Moroso 26150 Chevy Distributor Shim Kit
    x
                

    Eliminates oil pump bind and spark scatter when using a distributor in an engine with milled heads or decks. Shims fit between the intake manifold and your distributor allowing you to properly set gear mesh. Made from leak-free, high impact nylon.

    • Eliminates oil pump bind and spark scatter 
    • Prevents wiping out your distributor gear
    • Made from high impact nylon to exact GM gasket specs
    • Kit contains 3 sizes; .030", .060" & .100"
  • Edelbrock 2975 Victor Jr. Small Block Chevy Manifold
    Edelbrock 2975 Victor Jr. Small Block Chevy Manifold
    x
                

    Edelbrock's Victor Series intake manifolds set the standard for quality and performance in the industry. This Victor Jr. unit is designed for 262-400 c.i. small block Chevy V8s operating in the 3500-8000 rpm range. These versatile manifolds are excellent for many applications from high-performance street to drag/circle track racing. They provide maximum performance for engines with standard port location, iron and aluminum cylinder heads.

    All Victor Jr. manifolds offer extra material added for port matching and customizing, square bore carburetor flange, and water crossovers drilled and tapped for temp senders/bypass holes.

    325-2975 Instructions (PDF)

  • Small Block Chevy Chrome Alternator Base Brackets
    Small Block Chevy Chrome Alternator Base Brackets
    x
                

    Late 1950's and early 1960's S/B Chevys had the generator attached to the left exhaust manifold. With headers installed, our brackets are needed to reattach your generator/alternator. Bracket base attaches at #1 cylinder exhaust port and works in conjunction with slide bracket 720-9008.

    • Chrome plated steel
    • Requires slide bracket 720-9008
    • Mounts to driver side of engine
    • Not for use with stock exhaust manifolds
    • For '55-'68 S/B Chevy w/short water pumps

    Alternator Bracket Illustration (GIF)

  • Small Block Chevy Louvered Exhaust Manifold Covers, Chrome, Pair
    Small Block Chevy Louvered Exhaust Manifold Covers, Chrome, Pair
    x
                

    Premium chrome plated steel. Excellent detail for street rods or custom S/B Chevy installations where space is a problem. Louvered for added cooling. These covers are designed specifically for stock "Ram's Horn" exhaust manifolds, pre 1979 with left hand side dipstick block. These are NOT intended for headers and will not work with aftermarket manifolds or headers.

    • Overall length: 18.75"
    • Overall width: 3.13"
    • Overall height: 7.50"
    • Premium chrome plated steel
    • Louvered for added cooling
    • For stock Ram's Horn exhaust manifolds
    • NOT for use with headers 
    • For 1955-1979 small block Chevy (LH dipstick)
  • Edelbrock 5425 Small Block Chevy Dual Quad Intake Manifold
    Edelbrock 5425 Small Block Chevy Dual Quad Intake Manifold
    x
                

    Edelbrock's C-26 manifold is designed for 1955-1986 262-400 c.i.d. S/B Chevys with a power band of 1500-5000 rpm. This dual-quad is low profile for hood clearance on most vehicles. Air-conditioning bosses and front oil filler tube boss included. Stock alternator brackets DO NOT fit.

    H.E.I. distributor will fit. Use with 500 cfm Edelbrock carbs.

    Dual Quad Intake Manifold Installation Instructions (PDF)

  • Tru-Ram   Small Block Chevy Exhaust Manifolds, Polished Stainless
    Tru-Ram Small Block Chevy Exhaust Manifolds, Polished Stainless
    x
                The hobby was amazed by the design, quality and performance of our Small Block Chevy cast iron Tru-Ram® exhaust manifolds. Little did everyone know 'Speedy' Bill had more up his sleeve. These investment cast stainless steel ram horn manifolds feature a fully polished, show-quality finish. Enjoy the performance of tube-headers with the nostalgic look of the ram horn, along with the low maitenance characteristics that stainless steel provides!
    • Provides a tight-fit to minimize steering and clearance issues
    • Same performance as tube headers with classic ram horn styling
    • Offers a distinctive look
    • Fits most round port SBC cylinder heads 
    • Works with most straight or angle plug heads
    • 2-1/2" collector size
    • Includes stainless mounting hardware and gaskets
  • Edelbrock 7110 S/B Chevy Street Tunnel Ram Intake Manifold
    Edelbrock 7110 S/B Chevy Street Tunnel Ram Intake Manifold
    x
                

    Edelbrock's Street Tunnel Ram is designed for 302-327-350-400 c.i.d. small-block Chevy V8s operating below 7500 rpm where low-end torque is not a prime factor. Great for engines with slightly modified or aftermarket cylinder heads. Applicable to street machines, street rods, pro street and marine. Optimum power range of 3500-7500 rpm.

    Will NOT work with 1987-up cast iron heads or HEI distributors. See Notes tab for important install notes.

    325-7110 Instructions (PDF)

  • Three Plain 9 Super 7   Carbs on 1957-86 Small Block Chevy Edelbrock Intake
    Three Plain 9 Super 7 Carbs on 1957-86 Small Block Chevy Edelbrock Intake
    x
                

    This tri power kit uses the Edelbrock C-357-B S/B Chevy 3x2 intake with Speedway's 9 Super 7® carbs. It has progressive linkage to give you good driveability and economy, but power when you need it. The manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. (idle-5500 rpm)

    Kit includes three carbs, the intake, air cleaners, linkage kit, fuel block, fittings and red fuel line. Assembly required. Fits 1957-1986 Chevy 262-400 c.i.d. small-block Chevys.

    9 Super 7® Linkage Instructions (PDF)

    Note: Not applicable to an HEI based distributor system due to a clearance issue. This system must be used in conjunction with a small diameter based distributor.

    The 9Super7 Carb  makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required to do so with our kits is a Uni-Syn syncing tool and a little patience. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both prima

  • Edelbrock 2150 Small Block Chevy 6-Carb X1 Ram Log Intake Manifold
    Edelbrock 2150 Small Block Chevy 6-Carb X1 Ram Log Intake Manifold
    x
                

    These Edelbrock X1 manifolds are reproductions of the originals introduced in the 1950's for 283-327 small-block Chevy. This manifold features large free-flowing straight runners for six, 3-bolt carburetors such as our 9 Super 7. Oval carb opening measures 1.45” x 2.96”. Includes machined oil fill tube provision and period correct casting features for the best vintage look and performance for your small-block Chevy street rod application.

    • Exact reproduction of the original late 1950"s Edelbrock Ram manifold
    • Fits Chevy 283-327 engines
    • Uses six 3 bolt base carbs like 9 Super 7's, Stromburg 97 or Edelbrock 94's
    • 2500-7000 RPM
  • Edelbrock 7501 Performer RPM Air-Gap Small Block Chevy Intake Manifold
    Edelbrock 7501 Performer RPM Air-Gap Small Block Chevy Intake Manifold
    x
                

    Designed for 1955-86 262-400 c.i.d. Chevrolet V8s, the award-winning RPM Air-Gap incorporates the same race-winning technology that's used on the Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.

    Manifold features rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all 1976 and later alternator and A/C brackets for the street. The heater outlet boss is angled for proper fit over the valve cover. The temp sensor boss clears all waternecks.

    • For square-bore carburetors only
    • No provision for exhaust-heated chokes and no exhaust crossover
    • Not for 1987 and later cast iron heads
    • Will not fit under stock Corvette hood

    325-7501 Instructions (PDF)

  • MSD 5564 Street-Fire Spark Plug Wires, S/B Chevy, Stock Cap, Under Manifold
    MSD 5564 Street-Fire Spark Plug Wires, S/B Chevy, Stock Cap, Under Manifold
    x
                

    Street Fire spark plug wires have the quality you've come to expect from MSD Ignition at a price that's comparable to other brands. They feature spiral-wound, low-resistance conductors and high EMI suppression capabilities, all wrapped in simple, durable black sleeves and boots.  Fully assembled wires designed for S/B Chevys with points style stock socket cap. Routed under the headers.  

    • Helically wound conductor suppresses electro and radio noise
    • Kevlar core combination for great strength and durability
    • Heavy duty terminals for secure connection
    • 8mm silicone and synthetic jacket resists heat and abrasion
    • 500 Ohms per foot resistance for improved spark delivery and power
    • Silicone boots protect against high exhaust temps
  • Edelbrock 2703 Performer EPS Chevy Intake Manifold with Oil Fill
    Edelbrock 2703 Performer EPS Chevy Intake Manifold with Oil Fill
    x
                

    Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance over other low-rise dual plane manifolds. This small-block Chevy manifold has a runner design that's "tuned" for peak torque around 3500 rpm on a 350-inch engine and it produces power from off-idle to 5500 rpm.

    Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the standard Performer manifold on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most.

    325-2703 Instructions (PDF)

  • Edelbrock 5419 1955-86 Small Block Chevy Three Deuce Intake Manifold
    Edelbrock 5419 1955-86 Small Block Chevy Three Deuce Intake Manifold
    x
                

    Designed for 1955-86 262-400 c.i.d. small-block Chevys, this 3x2 style manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. This tri power manifold has a machined front oil filler tube pad with boss. Carb center-to-center: 5-1/2". Idle to 5500 rpm power band.

    325-5419 Instructions (PDF)

  • Professional Products Crosswind Small Block Chevy Intake Manifold
    Professional Products Crosswind Small Block Chevy Intake Manifold
    x
                

    If you are running a maximum effort S/B Chevy V8, then this is the intake for you! The Professional Products Crosswind manifold is a high performance dual plane, 180° manifold designed to be used with Holley, Carter AFB, or Edelbrock square flange carbs. The unique design isolates the plenum from the heat generated by your engine, which will give your engine a cooler air-fuel mixture and make more horsepower.

    • RPM range is 1500-6500
    • Available plain or show polished
    • Power comparable to single plane manifolds yet retains throttle response/driveability of a dual plane
    • Cast-in nitrous bosses
    • Water outlets at all four corners
    • Dual distributor hold-downs
    • Accepts late model waterneck, A/C, alternator, and HEI

    Fits 1957-1986 heads and includes adapters for use on 1987-1995 small block heads.

  • Edelbrock 2925 Super Victor Small Block Chevy Intake Manifold
    Edelbrock 2925 Super Victor Small Block Chevy Intake Manifold
    x
                

    Edelbrock's Super Victor (3500-8500 rpm) is a high-performance, feature-packed racing manifold for standard port location 23-degree cylinder heads. A taller profile with extra long runners that extend into the plenum offers increased volume. The cross-sectional area of the runners are tuned to complement the runner length creating substantial torque increases at 4500-5500 rpm.

    For Chevrolet 262-400 c.i. Small-Block V8. The Super Victor is designed for heads with standard port location and the runners match the "flat floor" entry of the latest 23° heads. It's about 1" taller than the Victor Jr., putting the carb pad height at 5-1/2" from end seals.

    • Slotted flange bolt holes to allow mating on decked blocks or milled heads
    • Rear water outlets allow custom cooling system routing
    • Flange above the intake ports is machined flat to provide a straight-line reference for port-matching layout
    • A boss for a distributor clamp has been added on the left side, for easier to access when timing an engine
    • Each runner has a nitrous boss to aid in fogger nozzle installation

    325-2925 Instructions (PDF)

  • Tru-Ram   Small Block Chevy Exhaust Manifolds, Unpolished Stainless
    Tru-Ram Small Block Chevy Exhaust Manifolds, Unpolished Stainless
    x
                

    The hobby was amazed by the design, quality and performance of our Small Block Chevy cast iron Tru-Ram® exhaust manifolds. Little did everyone know 'Speedy' Bill had more up his sleeve. These investment cast stainless steel ram horn manifolds feature an as-cast, unpolished finish for a distinctive look. Enjoy the performance of tube-headers with the nostalgic look of the ram horn, along with the low maitenance characteristics that stainless steel provides!

    • Provides a tight-fit to minimize steering and clearance issues
    • Same performance as tube headers with classic ram horn styling
    • Offers a distinctive look
    • Fits most round port SBC cylinder heads 
    • Works with most straight or angle plug heads
    • 2-1/2" collector size
    • Includes stainless mounting hardware and gaskets
  • Edelbrock 2901 Victor Jr Sportsman 2V Chevy Small Block Manifold
    Edelbrock 2901 Victor Jr Sportsman 2V Chevy Small Block Manifold
    x
                

    Designed for competition 262-400 c.i. S/B Chevys used in all forms of racing, the Victor Jr. intake manifolds incorporate Edelbrock's extensive knowledge in induction technology. Designed for the 2 bbl racer, providing outstanding performance from 3500 to 7000 RPM. The runners are sized especially for the 2 bbl racing engines for the ultimate combination of torque/horsepower and fuel distribution. 

    An extra tall carburetor pad eliminates the need for spacers, and rear water outlets allow for a 4-corner coolant flowpath if desired. Other features include dual distributor clamp locations and port exits sized to match Chevy cast-iron Bowtie cylinder heads.  Accepts standard restrictor plates and carb adaptors.

    • Extra material added for port matching and customizing
    • Water crossovers drilled and tapped for temp senders/bypass holes
    • Right front has relief for dry sump "pressure in" lines

    Victor Jr. Sportsman 2V Intake Manifold Installation Instructions (PDF)

  • Edelbrock 5001 Small Block Chevy Torker II Intake Manifold
    Edelbrock 5001 Small Block Chevy Torker II Intake Manifold
    x
                

    Designed for 1955-86 high-performance 262-400 c.i.d. small-block Chevy V8s operating in the 2500-6500 RPM range. The Torker II is an updated version of original Torker offering better performance. Manifold accepts late-model waterneck, air-conditioning, alternator and H.E.I. distributor.

    Will fit Corvette and 1987 and later stock aluminum heads. Will NOT fit 1987 and later cast iron heads and will NOT cover port openings of Chevrolet Bowtie or LT1 heads.

    NOT intended for use on heavy vehicles (trucks, vans etc.).

    Torker II Intake Manifold Installation Instructions (PDF)

  • Speedway Manifold Filler Neck
    Speedway Manifold Filler Neck
    x
                

    This neck allows you to fill your cooling system at the intake manifold if you radiator is lower than the intake. It can be flipped over for RH or LH upper hoses, and has two 1/4" npt and one 1/2" npt hole in the back for bypass lines or sending units. Fill cap plate has a 7/16" pipe nipple welded into the overflow area.

    Fits Small Block or Big Block Chevy V8.

  • Edelbrock 2601 Performer Air-Gap Intake Manifold, 1955-86 S/B Chevy
    Edelbrock 2601 Performer Air-Gap Intake Manifold, 1955-86 S/B Chevy
    x
                

    This award-winning design incorporates the same race-winning technology that's been used on our Victor Series competition intakes for years. Designed for 1955-86 262-400 c.i.d. small-block Chevys, the Performer Air-Gap features the air-gap design for the ultimate street performance.  These new Performer Air-Gap manifolds are ideal for street performance from idle-to-5500 rpm.

    The open air-gap separates the runners from the hot lifter-valley cover, resulting in a cooler, denser charge, meaning more power and better throttle response throughout the power band.

    • Chevrolet 262-400 Small-Block V8
    • Dual plane design
    • Idle - 5500 RPM
    • Ideal choice for street rods and street machines
    • No provision for exhaust heated chokes or exhaust crossover
    • Fits spread-bore or square-bore carburetors
    • Will not fit under stock Corvette hood
    • Available with standard finish

    325-2601 Instructions (PDF)

  • Edelbrock 5418 Small Block Chevy 3x2 3-Bolt Carb Intake Manifold
    Edelbrock 5418 Small Block Chevy 3x2 3-Bolt Carb Intake Manifold
    x
                

    The Edelbrock C-357-B manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys. This 3x2 plain finish aluminum manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. (idle-5500 rpm)  Accepts oil fill tube and breather.

    Use Stromberg, Holley, Demon 3-bolt carb (with 1-1/4" bore). HEI distributor WILL NOT fit this manifold.

  • Power+Plus Typhoon Small Block Chevy 1957-95 Intake Manifold
    Power+Plus Typhoon Small Block Chevy 1957-95 Intake Manifold
    x
                

    If you are running a little more motor, then this is the intake for you! The Professional Products Typhoon manifold is a high performance dual plane, 180° street manifold designed to be used with Holley, Carter AFB, or Edelbrock square flange carbs. For 1957-86 S/B Chevy and will fit 1987-95 heads with supplied adapters.

    • RPM range is 1500-6500
    • Available plain or show polished
    • Power comparable to single plane manifolds yet retains throttle response/driveability of a dual plane
    • Cast-in nitrous bosses
    • Water outlets at all four corners
    • Dual distributor hold-downs
    • Provisions to add an oil fill tube
    • Accepts late model waterneck, A/C, alternator, and HEI

    910-11265 Dyno Sheet (PDF)

    910-11265 Instructions (PDF) 

  • Edelbrock Performer Air-Gap Intake Manifold, Small Block V8, Endurashine
    Edelbrock Performer Air-Gap Intake Manifold, Small Block V8, Endurashine
    x
                

    This award-winning design incorporates the same race-winning technology that's been used on Edelbrock's Victor Series competition intakes for years. Designed for 1955-86 262-400 c.i.d. small-block Chevys, the Performer Air-Gap features the air-gap design for the ultimate street performance.  These new Performer Air-Gap manifolds are ideal for street performance from idle-to-5500 rpm.

    The open air-gap separates the runners from the hot lifter-valley cover, resulting in a cooler, denser charge, meaning more power and better throttle response throughout the power band.

    • Chevrolet 262-400 Small-Block V8
    • Dual plane design
    • Idle - 5500 RPM
    • Ideal choice for street rods and street machines
    • For 1987-95 cast iron heads with canted center bolt holes
    • No provision for exhaust heated chokes or exhaust crossover
    • Fits spread-bore or square-bore carburetors
    • Will not fit under stock Corvette hood
    • Available with endurashine finish

    Note: Be sure to include new gaskets with this intake.  Depending on your head application, we recommend choosing from our two suggestions.

    325-26014 Instructions (PDF)

  • Fel-Pro P1209 Small Block Chevy Intake Manifold Gaskets-1.38x2.38 Inch
    Fel-Pro P1209 Small Block Chevy Intake Manifold Gaskets-1.38x2.38 Inch
    x
                Fel-Pro Blue Stripe premium quality intake manifold gaskets for Small Block Chevy (SBC).
            
  • Fel-Pro P1263 Small Block Chevy Intake Manifold Gaskets-1.31x2.02 Inch
    Fel-Pro P1263 Small Block Chevy Intake Manifold Gaskets-1.31x2.02 Inch
    x
                Fel-Pro Blue Stripe premium quality intake manifold gaskets for Small Block Chevy (SBC).
            
Goto Previous PagePrevious Page
1 2 3 4 5