Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"small block cast valve covers" Page 1 of 2

  • Speedway Small Block Chevy Tall Aluminum Valve Covers
    Speedway Small Block Chevy Tall Aluminum Valve Covers
    x
                

    Clears rocker arm stud girdles or roller rockers. Perfect for welding in breather tubes. Plain, as-cast finish.

    Fits '60-'86 S/B Chevy V8.

  • Chevrolet Performance 19258602 Sealed 350 602 Small Block Crate Engine
    Chevrolet Performance 19258602 Sealed 350 602 Small Block Crate Engine
    x
                Please view the product's page for more information
            
  • Finned 1960-86 Small Block Chevrolet Valve Covers, Plain
    Finned 1960-86 Small Block Chevrolet Valve Covers, Plain
    x
                

    These are a great finishing touch for your small block Chevy engine. These cast aluminum valve covers have the distinctive 'finned' design along with the Chevrolet logo for that traditional look. They do not have any oil fill or pcv holes, so you will have to run an intake with an oil tube.

    Hardware included.

  • Finned 1960-86 Small Block Chevrolet Valve Covers, Polished
    Finned 1960-86 Small Block Chevrolet Valve Covers, Polished
    x
                

    These are a great finishing touch for your small block Chevy engine. These cast aluminum valve covers have the distinctive 'finned' design along with the Chevrolet logo for that traditional look. They do not have any oil fill or pcv holes, so you will have to run an intake with an oil tube.

    Hardware included.

  • Oldsmobile Valve Covers for Small Block Chevy
    Oldsmobile Valve Covers for Small Block Chevy
    x
                These neat valve covers are designed to look like the early Oldsmobile valve covers but fit late style small block Chevys using center bolt valve cover cylinder heads.  They can also be used with conventional small block cylinder heads by using the valve cover adapter kit listed below.  Order one set of valve covers and one set of looms.

    910-8202: These valve covers have one, 1.22" hole in each cover to accept a PCV valve grommet, or a filler plug. They measure 2.5" from their own gasket surface to the underside of the 'top' of the valve cover. The customer will add the thickness of their valve cover gasket and/or the adapter for early heads, to determine rocker arm clearances. The plain finish valve covers and indeed plain, die-cast aluminum. Not painted.
  • Billet Specialties Streamline Chevy Valve Covers
    Billet Specialties Streamline Chevy Valve Covers
    x
                Billet Specialties Streamline valve covers offer a fresh new look for hot rod & custom car valve covers. A single precision machined raised billet rib sits upon on a die cast aluminum valve cover to complement any exterior trim cues. All valve covers include stainless hardware and baffles. Works with 1-1/4" breathers such as our 910-23120. 
    • Removable accent trim spear
    • Includes metal baffles
    • Includes grommets
    • 1960-86 S/B Chevy
    • Works with 1-1/4” breathers
    • Choose raw finish or satin black powdercoated
  • Finned 1987-98 Small Block Chevrolet Centerbolt Valve Covers, Plain
    Finned 1987-98 Small Block Chevrolet Centerbolt Valve Covers, Plain
    x
                

    These are a great finishing touch for your small block Chevy engine. These cast aluminum valve covers have the distinctive 'finned' design along with the Chevrolet logo for that traditional look. They do not have any oil fill or pcv holes, so you will have to run an intake with an oil tube.

    Hardware included. Only uses the end two bolts.

  • Edelbrock 4160 1960-95 Small Block Ford Finned Valve Covers
    Edelbrock 4160 1960-95 Small Block Ford Finned Valve Covers
    x
                

    Edelbrock first made these aluminum valve covers in the late '50s and they're still a classic. Made of heavy-gauge sand-cast aluminum. Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired. They are tall enough to clear roller rockers. Overall height is 3-3/4".

    Made in the USA. 

  • Finned 1987-98 Small Block Chevrolet Centerbolt Valve Covers, Polished
    Finned 1987-98 Small Block Chevrolet Centerbolt Valve Covers, Polished
    x
                

    These are a great finishing touch for your small block Chevy engine. These cast aluminum valve covers have the distinctive 'finned' design along with the Chevrolet logo for that traditional look. They do not have any oil fill or pcv holes, so you will have to run an intake with an oil tube.

    Hardware included. Only uses the end two bolts.

  • Edelbrock 4145 Chevy 262-400 V8 Valve Covers
    Edelbrock 4145 Chevy 262-400 V8 Valve Covers
    x
                

    Fits small block Chevys from 1959-86. Edelbrock first made these aluminum valve covers in the late '50s and they're still a classic. Made of heavy-gauge sand-cast aluminum. Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired. They are tall enough to clear roller rockers. Overall height is 3-1/2" inches. 

    Made in the U.S.A. 

  • Oldsmobile Valve Cover Wire Looms for Small Block Chevy
    Oldsmobile Valve Cover Wire Looms for Small Block Chevy
    x
                

    These die-cast wire looms evenly space four spark plug wires on our 'Olds-style' valve covers (room for 8mm wires, larger if you modify them). These looms completely cover the oil fill/pcv valve grommet holes. You will need to modify the loom (by perhaps boring a large hole) to access the valve cover's 1.22"' hole.

    Acorn nuts are provided to make quick removal of the looms simple and easy (12-1/2" mount centers). The "Rocket" decals are a dark red color. Order one set of looms for one set of valve covers.

    Not for use on stock Oldsmobile valve covers. Designed for use with S/B Chevy valve covers 910-8202.

  • GM Performance 19210007 Small Block Chevy 350/330 HP Long Block Engine
    GM Performance 19210007 Small Block Chevy 350/330 HP Long Block Engine
    x
                Please view the product's page for more information
            
  • Moroso 68385 Tall Aluminum Valve Covers w/ Crossover Breathers
    Moroso 68385 Tall Aluminum Valve Covers w/ Crossover Breathers
    x
                

    Die cast aluminum valve covers with cross-over breather tube, 1-3/8" shielded breathers, hoses, and clamps. Extra tall to clear roller rocker arms, stud girdles, and most shaft rocker assemblies. Features a brilliant hand polished finish. 

    Fits '60-'86 S/B Chevy.

  • Moroso 68370 Tall Aluminum Valve Covers w/ Breathers
    Moroso 68370 Tall Aluminum Valve Covers w/ Breathers
    x
                

    Die cast aluminum valve covers have 1-3/8" shielded breathers on one side only. Extra tall to clear roller rocker arms, stud girdles, and most shaft rocker assemblies. Features a brilliant hand polished finish. 

    Fits '60-'86 S/B Chevy.

  • BluePrint 383 Small Block Chevy Crate Engine
    BluePrint 383 Small Block Chevy Crate Engine
    x
                Please view the product's page for more information
            
  • Ansen 110-3001 1960-1986 Small Block Chevy Valve Covers
    Ansen 110-3001 1960-1986 Small Block Chevy Valve Covers
    x
                

    The perfect finishing touch for your small block Chevy engine.  These cast aluminum standard height valve covers fit 1960-86 small block Chevy V8.

    No holes for breathers or fill caps.

  • Small Block Chevy Tall Aluminum Centerbolt Valve Covers, Polished
    Small Block Chevy Tall Aluminum Centerbolt Valve Covers, Polished
    x
                

    If you're running 1987-up centerbolt heads on your S/B Chevy, you know how hard it is to find valve covers to clear your rocker arms. These polished aluminum covers are 3-3/4" tall. Has two 1-3/8" x 2-3/4" tall baffled breather tubes on one side for oval track racing.

    Bolts not included. Will not clear stud girdles.

  • World Products 053030 Small Block Ford Windsor Jr Cylinder Head, Bare
    World Products 053030 Small Block Ford Windsor Jr Cylinder Head, Bare
    x
                When it comes to high performance replacements for  factory cast iron heads, World’s WINDSOR JR. has the market covered with  180cc intake runners, plus the 64cc exhausts ports are substantially  larger than OEM Ford heads. Add a highly efficient combustion chamber  design and larger valves and you have big bolt-on power. These heads are  also 50-State emissions legal factory replacements.The WINDSOR series  of heads are the cost-effective choice for serious power from your 302!
    • Material: High density cast iron
    • Valve Seats: Intake (integral), exhaust (hardened)
    • Valve Guides: Integral cast iron
    • Spring Seats: Machined for 1.560" and 1.250"
    • Intake Runner: 180cc, standard port location
    • Exhaust Ports: 64cc, standard location (dual exhaust bolt pattern to accommodate large custom headers)
    • Combustion Chamber: 58cc
    • Spark Plug: 14mm 5/8" .460" reach tapered style, Accel 276 or 276S or equivalent
    • Valve Job: Multi-angle intake and radiused exhaust
    • Valve Cover Rail: Raised
    • Valve Angle: Stock 20°
    • Accessory Bolt Holes: Stock
  • Edelbrock 7501 Performer RPM Air-Gap Small Block Chevy Intake Manifold
    Edelbrock 7501 Performer RPM Air-Gap Small Block Chevy Intake Manifold
    x
                

    Designed for 1955-86 262-400 c.i.d. Chevrolet V8s, the award-winning RPM Air-Gap incorporates the same race-winning technology that's used on the Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.

    Manifold features rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all 1976 and later alternator and A/C brackets for the street. The heater outlet boss is angled for proper fit over the valve cover. The temp sensor boss clears all waternecks.

    • For square-bore carburetors only
    • No provision for exhaust-heated chokes and no exhaust crossover
    • Not for 1987 and later cast iron heads
    • Will not fit under stock Corvette hood

    325-7501 Instructions (PDF)

  • GM Performance 425 Horsepower ZZ383 Long Block, Small Block Chevy Engine
    New
    GM Performance 425 Horsepower ZZ383 Long Block, Small Block Chevy Engine
    x
                Please view the product's page for more information
            
  • 1987-Up Small Block Chevy Tall Valve Covers, Ball Milled
    1987-Up Small Block Chevy Tall Valve Covers, Ball Milled
    x
                

    Polished cast aluminum valve covers with the look of billet for your late Small Block Chevy center bolt heads. Ball milled top design. Includes baffles and valve cover bolts.

    • Overall height: 3-5/8"
    • Valve cover depth: 3-1/2"
    • One 1-3/16" push in hole per cover
  • 1987-Up Small Block Chevy Tall Valve Covers, Flame Milled
    1987-Up Small Block Chevy Tall Valve Covers, Flame Milled
    x
                

    Polished cast aluminum valve covers with the look of billet for your late Small Block Chevy centerbolt heads. Flamed top design. Includes baffles and valve cover mounting bolts.

    • Overall height is 3-3/4"
    • I.D. of the breather hole is 1.176"
    • Use with breathers 910-11033 or 550-2068
    • For applications where a PCV valve is needed, use 910-11034
  • Edelbrock 75014 RPM Air-Gap S/B Chevy Intake Manifold, Endurashine
    Edelbrock 75014 RPM Air-Gap S/B Chevy Intake Manifold, Endurashine
    x
                

    Designed for 1955-86 262-400 c.i.d. Chevrolet V8s, the award-winning RPM Air-Gap incorporates the same race-winning technology that's used on the Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.

    Manifold features rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all 1976 and later alternator and A/C brackets for the street. The heater outlet boss is angled for proper fit over the valve cover. The temp sensor boss clears all waternecks.

    • For square-bore carburetors only
    • No provision for exhaust-heated chokes and no exhaust crossover
    • Not for 1987 and later cast iron heads
    • Will not fit under stock Corvette hood

    325-75014 Instructions (PDF)

  • World Products 053040-BARE Ford Windsor Sr. Cylinder Head, Bare
    World Products 053040-BARE Ford Windsor Sr. Cylinder Head, Bare
    x
                

    Jack Roush Racing designed these high density cast iron heads to be the most powerful head for 5.0 Fords. When it comes to high performance replacements for factory cast iron heads, World’s WINDSOR SR. boasts 200cc ports and 64cc exhausts ports, which flow a substantially larger volume of air than any OEM Ford head. Add a highly efficient combustion chamber design and larger valves, and you have big bolt-on power! These heads are also 50-State emissions legal factory replacements.

    • 64cc Combustion Chambers
    • Intake Runner: 200cc
    • Exhaust Port: 64cc
    • Machined for 2.02 Intake & 1.60 Exhaust valves (11/32" stem)
    • Valve Seats: Intake (integral), exhaust (hardened)
    • Valve Guides: Integral cast iron
    • Spring Seats: Machined for 1.560" and 1.250"
    • Raised Valve Cover Rail
    • Spark Plugs: 14MM, .460" Reach with 5/8" Hex Plugs, Tapered Seat
  • Blueprint BP3830CT1 383 Small Block Chevy Vortec Head Crate Engine
    Blueprint BP3830CT1 383 Small Block Chevy Vortec Head Crate Engine
    x
                Please view the product's page for more information
            
  • Garage Sale - Oldsmobile Valve Covers for Small Block Chevy
    Garage Sale
    Garage Sale - Oldsmobile Valve Covers for Small Block Chevy
    x
                Please view the product's page for more information
            
  • Edelbrock 75164 262-400 Chevy EnduraShine RPM Air-Gap Vortec Intake
    Edelbrock 75164 262-400 Chevy EnduraShine RPM Air-Gap Vortec Intake
    x
                

    Based on the powerful Performer RPM Vortec #7116, single four-barrel intake is designed for 262-400 c.i.d. Chevy V8s with 1996 and later Vortec (L31) cast iron or the new Edelbrock E-Tec aluminum heads.The RPM Air-Gap manifold delivers outstanding performance using the same air-gap technology found in our race-winning Victor manifolds. This unique design separates the hot engine valley from the air/fuel mixture for a cooler, denser charge and more power throughout the rpm range. An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines. Includes rear water outlets, nitrous bosses, a temp sensor boss that clears all waternecks, two distributor clamp locations and a heater outlet boss that's angled for proper fit over the valve cover. Accepts 1976 and later alternator and air-conditioning brackets for street installations. For square-bore carbs. No provision for exhaust-heated chokes and no exhaust crossover. Will not fit under stock Corvette hood. Available with EnduraShine finish.

  • Speedway S/B Chevy Aluminum Valve Covers w/ Crossover Breather Tube
    Speedway S/B Chevy Aluminum Valve Covers w/ Crossover Breather Tube
    x
                

    Includes two tall cast aluminum valve covers, two shielded breathers, one crossover tube, four stainless clamps and two hoses.

    • Tall valve covers clear most stud girdles or roller rocker arms
    • Washable breather filter elements
    • Fits '60-'86 Small Block Chevy V8
  • Edelbrock 7516 Performer RPM Air-Gap Vortec S/B Chevy Intake Manifold
    Edelbrock 7516 Performer RPM Air-Gap Vortec S/B Chevy Intake Manifold
    x
                

    Based on the proven Performer RPM Vortec, this single four-barrel intake is designed for 262-400 c.i.d. Chevy V8s with 1996 and later Vortec (L31) cast iron or Edelbrock E-Tec aluminum heads. The unique Air-Gap design separates the hot engine valley from the air/fuel mixture for a cooler, denser charge and more power throughout the rpm range.

    An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines. Includes rear water outlets, nitrous bosses, a temp sensor boss that clears all waternecks, two distributor clamp locations and a heater outlet boss that's angled for proper fit over the valve cover.

    • Accepts 1976 and later alternator and air-conditioning brackets
    • For square-bore carbs
    • No provision for exhaust-heated chokes and no exhaust crossover
    • Will not fit under stock Corvette hood

    Edelbrock Intake Manifold Installation Instructions (PDF)

  • Garage Sale - Ansen 1960-86 Small Block Chevy Valve Covers, Polished
    Garage Sale
    Garage Sale - Ansen 1960-86 Small Block Chevy Valve Covers, Polished
    x
                

    The perfect finishing touch for your small block Chevy engine.  These cast aluminum standard height valve covers fit 1960-86 small block Chevy V8.

    No holes for breathers or fill caps.

     

    These valve covers are garage sale priced because they have casting flaws between the fins. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • BluePrint 383 Small Block Chevy Roller Crate Engine
    BluePrint 383 Small Block Chevy Roller Crate Engine
    x
                Please view the product's page for more information
            
  • GM Performance 19244450 Small Block Chevy 350/290HP Deluxe Crate Engine
    GM Performance 19244450 Small Block Chevy 350/290HP Deluxe Crate Engine
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2