Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"short water hose" Page 1 of 1

  • Ford 302/351W High Performance Aluminum Short Water Pump
    Ford 302/351W High Performance Aluminum Short Water Pump
    x
                

    Each aluminum pump is manufactured from T6 aluminum and features a revised impeller entry with curved vanes for maximum flow, pressure and equal distribution to both sides of the block. It also features a unique seal assembly for leak proof operation.

    • Fan hub has a 1-3/4" bolt pattern
    • The lower hose comes out on the driver's side and uses a 1-3/4" lower hose

    Includes a heavy duty bearing and 3/4" shaft and pulley snout; and 1/2" NPT hole on the passenger side (for heater hose) and on the top (for by-pass hose). Thicker (0.100") stamped steel rear plate. Weighs 6 lbs.

    Ford 302/351W Water Pump Installation Instructions (PDF)

  • Small Block Chevy Performance Aluminum Water Pump, Short
    Small Block Chevy Performance Aluminum Water Pump, Short
    x
                Each pump is manufactured from T6 aluminum and features an impeller with curved vanes for maximum flow, pressure and equal distribution to both sides of the block. It also features a unique seal assembly for leak proof operation. 
    • 3/4" shaft with 5/8" fan pilot snout
    • 1/2" NPT hole on passenger side (for heater hose) and on top (for bypass hose)
    • Stamped steel rear plate
    • Extra thick fan hub
    • 3/4" ultra duty bearings
    • Adjustable cam stop
    • State of the art aluminum castings
    • Equal flow to both cylinder banks
    • Precision impeller
    • Higher flow rate and pressure rate
    • Weighs 6 lbs.
    • Does not have a set screw retaining the fan hub

    NOTE: This pump is designed for street use and is not to be run on a motor which exceeds 5,500 RPM. 

    910-15580 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.  

  • Speedway Adjustable Small Block Chevy Aluminum Short Water Pump
    Speedway Adjustable Small Block Chevy Aluminum Short Water Pump
    x
                

    Speedway's adjustable water pump is tried, tested and true. It has great flow, superior quality and standard features that are typically only available on water pumps costing twice as much. State-of-the-art aluminum casting and a precision impeller provide equal flow to both cylinder banks. If you're using a cog belt on your race car, this is the pump you want since it's adjustable. The 1/2" mount holes in this pump are larger than normal, allowing it to be moved up or down slightly to help with belt tension.

    • Adjustable mounting holes
    • High flow and pressure rates
    • Adjustable cam stop
    • Extra-thick fan hub
    • 3/4" inch heavy duty bearing
    • Pressed-fit and set-screw-retained fan hub
    • Large-diameter shaft and reinforced housing make it ideal for oval-track applications

    910-15582 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump

  • Zips Small Block Chevy Water Pump Riser
    Zips Small Block Chevy Water Pump Riser
    x
                
    • Water pump riser solves the common problem of the fan being mounted too low on the radiator to be effective
    • Raises the pump and mechanical fan 5" higher in the engine compartment
    • Provides mounting surfaces for an A/C compressor and alternator
    • Riser housing comes with brackets and hardware
    • Water pump not included (use Chevy 250 L6 water pump)

    910-2306 Instructions (PDF)

    Learn more about using different water pump accessories to best fit your application by reading our tech article.  SBC - Short vs Long Water Pump.

  • KRC KIT16312015 Basic Serpentine Drive Kit-Crate Chevy Block Mt. Pump
    KRC KIT16312015 Basic Serpentine Drive Kit-Crate Chevy Block Mt. Pump
    x
                

    KRC's basic kits are the perfect starting point for your GM 602 & 604 Crate Engines. Select the kit with the options that suit your application, then choose the appropriate accessory to complete your kit.

    • Complete basic kit
    • GM 602 & 604 Crate Engines
    • Assembly contains:
      • 7.2cc aluminum power steering pump
      • 4.2" aluminum power steering pulley
      • Aluminum driver side lower block mounted power steering pump bracket
      • Pro series pulley kit
      • KRC high performance water pump
      • Water pump spacers
      • Goodyear Gatorback belt
      • Hardware and detailed instructions

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

    Cast Iron Pump Tech (PDF)

    Cast Iron Pump Installation Instructions (PDF)

    New Pump Tips (PDF)

    Serpentine Pulley Offset (PDF)

  • King Chrome Short Water Pump for 1955-1968 Small Block Chevy
    King Chrome Short Water Pump for 1955-1968 Small Block Chevy
    x
                

    These 1955-1968 Small Block Chevy (SBC) King Chrome short leg water pumps are made from OEM castings. Polished to a higher standard and beautifully chrome plated. Built from NEW components.

    • Standard volume pump, OEM style flow
    • Includes a 3/4” NPT allen head chrome plug for the top port
    • Includes a 5/8” chrome hose nipple for the passenger side port
    • Mounted length: 6"
    • Hose I.D.: 1.81"
    • Shaft Diameter: .63"
    • Shaft Length: .38"
    • Gaskets Included
    • Chrome plated cast iron
    • Weight: 8.05 lbs
    • Clearance from back of pump to engine block mount is .88"
    • This product has a 1 year warranty from date of purchase

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump

  • Small Block Chevy Polished Ribbed Aluminum Short Water Pump
    Small Block Chevy Polished Ribbed Aluminum Short Water Pump
    x
                

    Accents any small block Chevy installation. "Short" style (1955-1968) with 5⁄8" shaft and dual bolt pattern hub. 1⁄2" NPT ports at the top and inlet side for heater hose hook-up. Inlet accepts 1-3⁄4" radiator hoses.

    Small Block Chevy Water Pump Installation Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.

  • Moroso 63500 Small Block Chevy Aluminum Short Water Pump
    Moroso 63500 Small Block Chevy Aluminum Short Water Pump
    x
                

    Moroso first pioneered the aluminum water pump for racing over 15 years ago. Over the years, continual improvements have resulted in providing the best cooling system components available for competition use.

    • Computer designed housing cast from 356-T6 aluminum
    • Lightweight impeller maintains consistent coolant temp throughout the water jacket
    • Low-drag impeller adds 14HP @ 7,500 RPM 
    • Includes integral cam stop boss
    • Overall length of 5.603" from rear mounting face to hub face  

    Fits 1955-1968 “Short” design 5/8" shaft S/B Chevy appliactions. Note: Pump will not clear a billet 910-11040 timing cover.

    545-63500 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.    

  • Moroso 63520 Big Block Chevy Aluminum Short Water Pump
    Moroso 63520 Big Block Chevy Aluminum Short Water Pump
    x
                

    Moroso first pioneered the aluminum water pump for racing over 15 years ago. Over the years, continual improvements have resulted in providing the best cooling system components available for competition use.

    • Computer designed housing cast from 356-T6 aluminum
    • Lightweight impeller maintains consistent coolant temp throughout the water jacket
    • Prevents localized boiling, detonation, head warping and cracking
    • Overall length of 5.80" from rear mounting face to hub face

    Fits 1965-68 "Short" design 5/8" shaft B/B Chevy applications.

     

    545-63520 Instructions (PDF)

  • Short Chrome Heater Hose Fitting, 5/8 Inch Hose
    Short Chrome Heater Hose Fitting, 5/8 Inch Hose
    x
                Boy these fittings are hard to find! Short style for 5/8" hose. 1/2" NPT thread. Can be used for intake and water pump.
            
  • Short Chrome Heater Hose Fitting, 3/4 Inch Hose
    Short Chrome Heater Hose Fitting, 3/4 Inch Hose
    x
                Boy these fittings are hard to find! Short style for 3/4" hose. 1/2" NPT thread. Can be used for intake and water pump.
            
  • Snow White Small Block Ford Shorty Water Pump, 2-Groove Pulley
    Snow White Small Block Ford Shorty Water Pump, 2-Groove Pulley
    x
                
    • Positions lower hose (inlet) on the passenger side (1-3/4" diameter)
    • Allows use of a Chevy style radiator
    • 2" shorter than stock Ford pump 
    • Weighs 13.75 lbs. less than stock cast iron pump set-up
    • Fits 1963-1988 Ford 302 and 351 (Cleveland or Windsor)
    • Includes standard aluminum water pump
    • Aluminum adapter included
    • Machined aluminum 2-groove crank pulley and 1-groove water pump pulley
  • Small Block Chevy Electric Water Pump
    Small Block Chevy Electric Water Pump
    x
                

    Small Block Chevy Electric Racing Water Pumps feature a specially machined housing to maximize flow. The lightweight aluminum assembly is flow-rated at 35+ gallons per minute and weighs less than 6 lbs. Pump draws 6-7 amps.

    • Joints feature “O” ring gaskets for a perfect seal
    • Black powdercoat finish
    • Includes mounting hardware and wiring pig tail
    • Lenth of aluminum inlet 3.75" (1.00" of which is threaded 3/4")
    • Outlet holes: 1.00" ID
    • Block mount center to center: 1.80"
    • From pump bottom to mounting surface: 1.50"
    • From top of outlet shoulder to mounting surface: 3.5"
    • Diameter of the pump: 4.00"
    • Lenth outside to outside shoulders: 10.00"
    • 10.00" of wiring off the pump, 5.00" off pigtail

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.  

    Water Pump Rebate (PDF)

  • KRC KIT16320015 Serpentine Drive Kit-GM-Block Mt Pump/Idler Tensioner
    KRC KIT16320015 Serpentine Drive Kit-GM-Block Mt Pump/Idler Tensioner
    x
                Please view the product's page for more information
            
  • KRC KIT16312610 Serpentine Drive Kit-S/B Chevy, Head Mt. w/o P.S. Pump
    KRC KIT16312610 Serpentine Drive Kit-S/B Chevy, Head Mt. w/o P.S. Pump
    x
                

    KRC's basic kits are the perfect starting point for your GM 602 & 604 Crate Engines. Select the kit with the options that suit your application, then choose the appropriate accessory to complete your kit.

    • Complete basic crate engine kit
    • Designed for GM 602 & 604 Crate Engines
    • Assembly contains:
      • Aluminum driver side cylinder head mounted power steering pump bracket
      • Pro series pulley kit
      • KRC high performance water pump
      • Water pump spacers
      • Hardware and detailed instructions

    Serpentine Pulley Offset (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • KRC KIT16312615 Serpentine Drive Kit-S/B Chevy, Block Mt. w/o P.S Pump
    KRC KIT16312615 Serpentine Drive Kit-S/B Chevy, Block Mt. w/o P.S Pump
    x
                

    KRC's basic kits are the perfect starting point for your GM 602 & 604 Crate Engines. Select the kit with the options that suit your application, then choose the appropriate accessory to complete your kit.

    • Complete basic crate engine kit
    • Designed for GM 602 & 604 Crate Engines
    • Assembly contains:
      • Aluminum driver side lower block mounted power steering pump bracket
      • Pro series pulley kit
      • KRC high performance water pump
      • Water pump spacers
      • Hardware and detailed instructions

    Serpentine Pulley Offset (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • Plain Aluminum 348/409 Big Block Chevy Water Pump, Mechanical, Short
    Plain Aluminum 348/409 Big Block Chevy Water Pump, Mechanical, Short
    x
                

    If you are spending the money to build a 348 or 409 Chevy engine you had just as well put a high performance aluminum water pump on it. Threaded on top for heater hose fitting. Barbed hose fitting included. Comes with gaskets.

    • Threaded on top for heater hose fitting
    • Barbed hose fitting included
    • Comes with gaskets
    • Plain aluminum finish
  • Big Block Chevy Short Aluminum Water Pump
    Big Block Chevy Short Aluminum Water Pump
    x
                

    Our B/B Chevy water pumps feature a CNC machined iron impeller, ribbed aluminum housing, and a heavy duty bearing assembly. These mechanical pumps flow up to 35% more coolant than stock pumps. Plus, these aluminum pumps weigh less than half than the stock pump and require less power to operate.

    • T6 aluminum
    • Features an impeller with curved vanes for maximum flow, pressure, and equal distribution to both sides of the block
    • Unique seal assembly for leak proof operation
    • 3/4" bearing

    910-15588 Instructions (PDF)

    Note: Clearance from back of pump to engine block mount is .75" May interfere with some 8" balancers. Fan hub drilled for 1-3/4" and 2-1/8" bolt patterns.

  • Snow White Small Block Ford Shorty Water Pump, 3-Groove Pulley
    Snow White Small Block Ford Shorty Water Pump, 3-Groove Pulley
    x
                
    • Positions lower hose (inlet) on the passenger side (1-3/4" diameter)
    • Allows use of a Chevy style radiator
    • 2" shorter than stock Ford pump 
    • Weighs 13.75 lbs. less than stock cast iron pump set-up
    • Fits 1963-1988 Ford 302 and 351 (Cleveland or Windsor)
    • Includes standard aluminum water pump
    • Aluminum adapter included
    • Aluminum 3-groove crank pulley and 2-groove water pump pulley for cars with A/C
  • Powermaster 8-17926 Snug-Fit Chrome Alternator, 100 Amp
    Powermaster 8-17926 Snug-Fit Chrome Alternator, 100 Amp
    x
                

    This 100 amp PowerMaster 1-wire alternator mounts on the lower left front of your Small Block Chevy. This is a simple one-wire hook-up and includes the bracket and hardware, and pulley.

    100 Amp Alternator Installation Instructions (PDF)