Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"short pumps pump" Page 1 of 5

  • Speedway 30% Reduction Pulley Combo for S/B Chevy Short Pump
    Speedway 30% Reduction Pulley Combo for S/B Chevy Short Pump
    x
                

    Kit includes a cast aluminum double groove cast aluminum water pump pulley, crank pulley, and a matched pair of heavy duty belts. Slows water pump speed by 30% for increased horsepower.

    Fits Small Block Chevy V8 with '55-'68 short-style water pump with 5/8" shaft.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

  • Speedway 1:1 Pulley Combo, Small Block Chevy Short Pump
    Speedway 1:1 Pulley Combo, Small Block Chevy Short Pump
    x
                

    Kit includes a cast aluminum double groove water pump pulley and double groove crank pulley, and a matched pair of heavy duty belts. Has a 1:1 water pump/crankshaft speed ratio.

    Fits Small Block Chevy V8 with '55-'68 short-style water pump with either a 5/8" or 3/4" shaft.

    Note: The lower crank pulleys in our combo kits are manufactured thicker than normal stock pulleys.  This requires longer 3/8" bolts to be purchased separately.  Allen head type bolts recommended.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • 1955-68 Small Block Chevy Single Groove Upper Pulley, Short Water Pump
    1955-68 Small Block Chevy Single Groove Upper Pulley, Short Water Pump
    x
                

    These upper pulleys for 1955-68 short water pumps feature a single groove with a beautiful chrome finish.  They will work with 283-350 V8 small block Chevy engines.  Sitting flat on the workbench, the pulley is 2-3/4" high in the center at the water pump.

    • Upper pulley
    • 1955-68 283-350 V8 small block Chevy engine
    • Short water pumps
    • Single groove  
    • 7-1/8" Diameter
    • Chrome plated finish

    Note:  These upper pulleys will not work with our lower pulley (91015424).  Use our lower pulley (91015422) to correspond for proper alignment with these upper pulleys.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

  • Single Groove Power Steering Pump Pulley, Billet Aluminum, Short Pump
    Single Groove Power Steering Pump Pulley, Billet Aluminum, Short Pump
    x
                

    Power steering pump pulley for use with short-style (1955-1968) water pumps. Available in plain billet only.

    • For use with our 91032908 power steering pump 
    • Use with 2-groove lower crank pulley when using P/S bracket 91667920
    • Pulley runs off outer groove of lower crank pulley
    • 5/8" shaft hole w/ key way
    • Chamfered on the back side to allow clearance on pumps
  • 1955-68 Small Block Chevy Single Groove Lower Pulley, Short Water Pump
    1955-68 Small Block Chevy Single Groove Lower Pulley, Short Water Pump
    x
                

    These lower pulleys for 1955-68 short water pumps feature a single groove with a beautiful chrome finish.  They will work with 283-350 V8 small block Chevy engines. 

    • Lower pulley
    • 1955-68 283-350 V8 small block Chevy engine
    • Short water pumps
    • Single groove  
    • 6-3/4" Diameter
    • Chrome plated finish

    Note: Use our upper pulley (91015421) to correspond for proper alignment with these lower pulleys.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

     

  • Best Gasket 1949-53 Ford Flathead Short Block Gasket Set
    Best Gasket 1949-53 Ford Flathead Short Block Gasket Set
    x
                

    BESTgasket is the world's premier manufacturer of gaskets for vintage and classic American cars and trucks.  These quality gasket sets are for use with 1949-53 Ford Flathead V-8 engines.

    Includes:

    • Oil pan gasket
    • Improved "rope" rear main seal
    • Drain plug gasket
    • Oil pump gasket
    • Oil pump idler cover gasket
    • Water pump gaskets
    • Front cover gasket
    • Distributor gasket
    • Fuel pump stand gasket
  • Moroso 63510 Water Pump Spacer Small Block Chevy & 90 Degree V6
    Moroso 63510 Water Pump Spacer Small Block Chevy & 90 Degree V6
    x
                

    Convert '55-'68 Small Block Chevy water pumps to the longer, late model design. Bolts included. Spacers are 1-1/4" thick.

    Learn more about using different water pump accessories to best fit your application by reading our tech article.  SBC - Short vs Long Water Pump.

  • KRC KIT16312015 Basic Serpentine Drive Kit-Crate Chevy Block Mt. Pump
    KRC KIT16312015 Basic Serpentine Drive Kit-Crate Chevy Block Mt. Pump
    x
                

    KRC's basic kits are the perfect starting point for your GM 602 & 604 Crate Engines. Select the kit with the options that suit your application, then choose the appropriate accessory to complete your kit.

    • Complete basic kit
    • GM 602 & 604 Crate Engines
    • Assembly contains:
      • 7.2cc aluminum power steering pump
      • 4.2" aluminum power steering pulley
      • Aluminum driver side lower block mounted power steering pump bracket
      • Pro series pulley kit
      • KRC high performance water pump
      • Water pump spacers
      • Goodyear Gatorback belt
      • Hardware and detailed instructions

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

    Cast Iron Pump Tech (PDF)

    Cast Iron Pump Installation Instructions (PDF)

    New Pump Tips (PDF)

    Serpentine Pulley Offset (PDF)

  • Small Block Chevy Aluminum Double Upper Pulley, Short Pump
    Small Block Chevy Aluminum Double Upper Pulley, Short Pump
    x
                Cast aluminum double groove V-belt pulley for '55-'68 Small Block Chevy short style water pumps. Fits over 5/8" water pump snout, but can be drilled out to 3/4" if needed. 
    • Precision machined aluminum construction
    • Lightweight and strong
    • Double grooves for two V-belts

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • Small Block Chevy Aluminum Triple Lower Pulley, Short Pump
    Small Block Chevy Aluminum Triple Lower Pulley, Short Pump
    x
                

    Cast aluminum 3-groove V-belt crankshaft pulley for use with '55-'68 Small Block Chevy short style water pumps.

    • Precision machined aluminum construction
    • Lightweight and strong
    • Three grooves for 3 V-belts

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • Zips Small Block Chevy Water Pump Riser
    Zips Small Block Chevy Water Pump Riser
    x
                
    • Water pump riser solves the common problem of the fan being mounted too low on the radiator to be effective
    • Raises the pump and mechanical fan 5" higher in the engine compartment
    • Provides mounting surfaces for an A/C compressor and alternator
    • Riser housing comes with brackets and hardware
    • Water pump not included (use Chevy 250 L6 water pump)

    910-2306 Instructions (PDF)

    Learn more about using different water pump accessories to best fit your application by reading our tech article.  SBC - Short vs Long Water Pump.

  • Small Block Chevy Performance Aluminum Water Pump, Short
    Small Block Chevy Performance Aluminum Water Pump, Short
    x
                Each pump is manufactured from T6 aluminum and features an impeller with curved vanes for maximum flow, pressure and equal distribution to both sides of the block. It also features a unique seal assembly for leak proof operation. 
    • 3/4" shaft with 5/8" fan pilot snout
    • 1/2" NPT hole on passenger side (for heater hose) and on top (for bypass hose)
    • Stamped steel rear plate
    • Extra thick fan hub
    • 3/4" ultra duty bearings
    • Adjustable cam stop
    • State of the art aluminum castings
    • Equal flow to both cylinder banks
    • Precision impeller
    • Higher flow rate and pressure rate
    • Weighs 6 lbs.
    • Does not have a set screw retaining the fan hub

    NOTE: This pump is designed for street use and is not to be run on a motor which exceeds 5,500 RPM. 

    910-15580 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.  

  • Speedway Reduction Pulley Combo for Small Block Chevy Short Pump
    Speedway Reduction Pulley Combo for Small Block Chevy Short Pump
    x
                Please view the product's page for more information
            
  • Quick Change Cam Cover Kit, Plain
    Quick Change Cam Cover Kit, Plain
    x
                

    Quick change cam cover eliminates the need for dropping the oil pan when replacing timing chain or advancing camshaft. Fits small block Chevy with "long" style (1969-1986) water pump.

    Use of this cover with a "short" water pump typically causes clearance issues with the back of the pump. It can be used with a short pump, but the pump would need to be shimmed for clearance.

  • Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    x
                Please view the product's page for more information
            
  • 1969-85 Chevy Long Water Pump Nose Cover
    1969-85 Chevy Long Water Pump Nose Cover
    x
                

    Billet aluminum nose cover for 1969-85 small block Chevy long water pumps.

    Learn more about using different water pump accessories to best fit your application by reading our tech article.  SBC - Short vs Long Water Pump.   

  • Universal Water Pump Shim Kit
    Universal Water Pump Shim Kit
    x
                

    Water pump pulley shim kit provides proper drive belt alignment with pulleys.  Kit contains two aluminum 1/16" spacer and one 1/8" spacer.

    Learn more about using different water pump accessories to best fit your application by reading our tech article.  SBC - Short vs Long Water Pump

  • Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    x
                

    Billet Specialties Tru Trac serpentine systems for Small Block Chevy come complete with all attaching hardware and a comprehensive installation manual.

    • Polished 105 amp Powermaster 1-wire alternator
    • Cast finish Edelbrock reverse rotation water pump
    • Polished Sanden SD-7 compressor
    • Cast finish Maval power steering pump w/ AN fittings
    • All pulleys and brackets completely polished
    • Polished ARP 12-point stainless steel hardware
    • Goodyear Gatorback 6-rib serpentine belt

    Note: Requires the use of a remote power steering fluid reservoir. Vehicles that use front style motor mounts must be converted to side motor mounts when using the Tru Trac system.

    Small Block Chevy Serpentine System Installation Instructions (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • Small Block Chevy Power Steering Pump Bracket
    Small Block Chevy Power Steering Pump Bracket
    x
                

    This power steering pump bracket mounts a stock-style GM pump to a S/B Chevy block. Must be used with a short style water pump. Mounts on the lower left side. Bracket is zinc plated with threaded shaft. Designed to work with a '70-'82 GM pump that has a threaded pulley shaft, not a press-on style.

    Works with bolt-on or press-on pulleys with a mount spacing of 3.75". Due to the variety of pulley configurations, it is likely that you will have to space the pump/bracket for belt alignment.

    Note: This will NOT work when used on early 1970's Chevelle/Camaro chassis with a steering box.

  • Garage Sale -  Small Block Chevy Cast Alum. Short Pump Double Gro
    Garage Sale - Small Block Chevy Cast Alum. Short Pump Double Gro
    x
                

    Speedway Cast Aluminum double groove pulleys for Small Block Chevy feature a 20% reduction. Reduction pulleys have a smaller diameter which slows the speed of your fan, water pump, and alternator to reduce drag for more top-end horsepower. Plus, high RPM water pump operation is improved due to reduced fluid cavitation.

    • Machined from lightweight cast aluminum
    • Superior belt retention with extra-deep grooves
    • 20% reduction slows accessories down for less drag
    • Adds top-end horsepower
    • Reduces water pump impeller speed below cavitation threshold
    • Improved high-RPM cooling capabilities
    • 910-15482
      • 6-5/8" O.D.

    Available for Short style pumps ('55-'68). Fits a 5/8" shaft.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • Small Block Chevy Aluminum Single Upper Pulley, Short Pump
    Small Block Chevy Aluminum Single Upper Pulley, Short Pump
    x
                

    Cast aluminum single groove V-belt upper pulley for '55-'68 Small Block Chevy short style water pumps. Fits over 5/8" water pump snout, but can be drilled out to 3/4" if needed.

    • Precision machined aluminum construction
    • Lightweight and strong
    • Single groove for V-belt
    • From inside at fan hub to back side of pulley is 2-3/4"
    • From back edge of pulley to center of V-belt groove is 5/16"
    • Fits over a 5/8" water pump shaft (can be drilled to 3/4" if needed)
    • Diameter is 6-5/8"

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

  • Small Block Chevy Aluminum Double Lower Pulley, Short Pump
    Small Block Chevy Aluminum Double Lower Pulley, Short Pump
    x
                

    Cast aluminum double groove V-belt crankshaft pulley for use with '55-'68 Small Block Chevy short style water pumps.

    • Precision machined aluminum construction
    • Lightweight and strong
    • Double grooves for two V-belts

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

  • Small Block Chevy Cast Alum. Short Pump Double Groove Lower Pulley
    Small Block Chevy Cast Alum. Short Pump Double Groove Lower Pulley
    x
                

    Speedway Cast Aluminum double groove pulleys for Small Block Chevy feature a 20% reduction. Reduction pulleys have a smaller diameter which slows the speed of your fan, water pump, and alternator to reduce drag for more top-end horsepower. Plus, high RPM water pump operation is improved due to reduced fluid cavitation.

    • Machined from lightweight cast aluminum
    • Superior belt retention with extra-deep grooves
    • 20% reduction slows accessories down for less drag
    • Adds top-end horsepower
    • Reduces water pump impeller speed below cavitation threshold
    • Improved high-RPM cooling capabilities
    • 5-7/16" diameter

    Available for Short style pumps ('55-'68). Fits a 5/8" shaft.

    Note: The lower crank pulleys are manufactured thicker than normal stock pulleys.  This requires longer 3/8" bolts to be purchased separately.  Allen head type bolts recommended. 

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • Small Block Chevy Short Heavy Duty Aluminum Water Pump
    Small Block Chevy Short Heavy Duty Aluminum Water Pump
    x
                This super heavy duty race water pump features additional casting designs for more strength and reinforcement, plus a 3/4" fan pilot shaft and super duty bearing. It has 1/2" NPT threaded outlets on both the top and side, plus a 3/16" steel rear plate. It weighs 7-3/4 lbs.
    • 3/4" fan snout
    • Extra thick fan hub
    • 3/4" ultra duty bearings
    • Threaded for adjustable cam stop
    • State of the art aluminum castings
    • Equal flow to both cylinder banks
    • Precision impeller
    • Higher flow and pressure

    910-15581 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.  

  • Small Block Chevy Aluminum Single Lower Pulley, Short Pump
    Small Block Chevy Aluminum Single Lower Pulley, Short Pump
    x
                

    Cast aluminum single groove V-belt crankshaft pulley for use with '55-'68 Small Block Chevy short style water pumps.

    • Precision machined aluminum construction
    • Lightweight and strong
    • Single groove for V-belt
    • This pulley has "0" offset and is flat against balancer
    • From edge of pulley to center of V-belt groove is 5/16"
    • Diameter is 6-5/8"

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

     

     

  • Small Block Chevy Billet Aluminum Water Pump Pulley, 6-7/8 Inch O.D.
    Small Block Chevy Billet Aluminum Water Pump Pulley, 6-7/8 Inch O.D.
    x
                

    Speedway Billet Aluminum double groove pulleys for small block Chevy feature a 30% reduction. Reduction pulleys have a smaller diameter which slows the speed of your fan, water pump, and alternator to reduce drag for more top-end horsepower. Plus, high RPM water pump operation is improved due to reduced fluid cavitation.

    • High strength billet aluminum construction
    • Superior belt retention with extra-deep grooves
    • 30% reduction slows accessories down for less drag
    • Adds top-end horsepower
    • Reduces water pump impeller speed below cavitation threshold
    • Improved high-RPM cooling capabilities

    Fits short style pumps ('55-'68) or long style pumps ('69-'86). Fits a 5/8" shaft.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

  • Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Attaches to the lower left front of the block using the two lower bolt holes located by the timing cover (the old front motor mount holes). The adjusting arm mounts to the lower water pump hole.

    • Mounts low on driver's side
    • Two positions for superior adjustability 
    • Works with short or long style water pumps
    • Use with GM Saginaw pumps with attached reservoir, "type 1" p.s. pumps
    • Works with stock steel or aluminum aftermarket pulleys
    • Choose black or chrome finish

    Power Steering Tech Questions/Tips (Link)

    Power Steering Application Tech Questions/Tips (Link)

  • Speedway Adjustable Small Block Chevy Aluminum Short Water Pump
    Speedway Adjustable Small Block Chevy Aluminum Short Water Pump
    x
                

    Speedway's adjustable water pump is tried, tested and true. It has great flow, superior quality and standard features that are typically only available on water pumps costing twice as much. State-of-the-art aluminum casting and a precision impeller provide equal flow to both cylinder banks. If you're using a cog belt on your race car, this is the pump you want since it's adjustable. The 1/2" mount holes in this pump are larger than normal, allowing it to be moved up or down slightly to help with belt tension.

    • Adjustable mounting holes
    • High flow and pressure rates
    • Adjustable cam stop
    • Extra-thick fan hub
    • 3/4" inch heavy duty bearing
    • Pressed-fit and set-screw-retained fan hub
    • Large-diameter shaft and reinforced housing make it ideal for oval-track applications

    910-15582 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump

  • Reduction Pulley Combo for Small Block Chevy Long Pump
    Reduction Pulley Combo for Small Block Chevy Long Pump
    x
                

    Combo includes cast aluminum double-groove aluminum water pump pulley, crank pulley, and matched pair of heavy duty belts. Slows water pump speed by 20% for increased horsepower.

    For Small Block Chevy V8s with '69-'86 long style water pumps with 5/8" shaft.

    Note: The lower crank pulleys in our combo kits are manufactured thicker than normal stock pulleys.  This requires longer 3/8" bolts to be purchased separately.  Allen head type bolts recommended.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • 1955-1968 Chevy Short Pump Double Groove Upper Pulley
    1955-1968 Chevy Short Pump Double Groove Upper Pulley
    x
                

    Chrome upper Small Block Chevy pulley for 1955-1968 short pumps.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • Small Block Chevy Short Water Pump Gilmer Drive Kit
    Small Block Chevy Short Water Pump Gilmer Drive Kit
    x
                
    • Both upper and lower pulleys included
    • Upper 28 tooth pulley, 16 tooth lower pulley and 22-1/2" Gilmer belt
    • 43% reduction to eliminate overheating and belt slippage
    • Adjustable water pump 910-15582 is recommended for use with this kit

    Note: This  kit will work with most "short" water pumps, but hub heights do vary slightly depending on manufacturer. Some modification of the mounting holes may be required. This kit WILL NOT work with "long" water pumps as the crankshaft to hub center height is 5/16" greater than that of a "short" pump.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • King Chrome Short Water Pump for 1955-1968 Small Block Chevy
    King Chrome Short Water Pump for 1955-1968 Small Block Chevy
    x
                

    These 1955-1968 Small Block Chevy (SBC) King Chrome short leg water pumps are made from OEM castings. Polished to a higher standard and beautifully chrome plated. Built from NEW components.

    • Standard volume pump, OEM style flow
    • Includes a 3/4” NPT allen head chrome plug for the top port
    • Includes a 5/8” chrome hose nipple for the passenger side port
    • Mounted length: 6"
    • Hose I.D.: 1.81"
    • Shaft Diameter: .63"
    • Shaft Length: .38"
    • Gaskets Included
    • Chrome plated cast iron
    • Weight: 8.05 lbs
    • Clearance from back of pump to engine block mount is .88"
    • This product has a 1 year warranty from date of purchase

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump

  • Small Block Chevy Short Water Pump HTD Drive Kit
    Small Block Chevy Short Water Pump HTD Drive Kit
    x
                
    • Both upper and lower pulleys included
    • Upper 35 tooth pulley, 25 tooth lower pulley and 23.6" HTD belt
    • 43% reduction to eliminate overheating and belt slippage
    • Adjustable water pump 910-15582 is recommended for use with this kit

    Note: This  kit will work with most "short" water pumps, but hub heights do vary slightly depending on manufacturer. Some modification of the mounting holes may be required. This kit WILL NOT work with "long" water pumps as the crankshaft to hub center height is 5/16" greater than that of a "short" pump.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • KRC KRC15101001 Short Water Pump, S/B Chevy, 5.795 In. Long, 3/4 Shaft
    KRC KRC15101001 Short Water Pump, S/B Chevy, 5.795 In. Long, 3/4 Shaft
    x
                

    These crate engine replacement water pumps are 5.795" long with a 3/4" shaft.  They are a special length, designed to work with the KRC serpentine drive kits.

    • Small Block Chevy
    • Works with KRC serpentine drive kits
    • 5.795" long
    • 3/4" shaft 

    Water Pump Tech (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.   

     

  • Speedway Small Block Chevy Short Steel Water Pump
    Speedway Small Block Chevy Short Steel Water Pump
    x
                Our 100% new, pressure cast & CNC machined pumps feature characteristics often overlooked by other manufacturers - precision-ground hubs to eliminate vibration; heavy duty ball-roller or ball-ball bearings; ceramic seal assemblies for extended life; closed-vane impellers for unsurpassed output; and zinc-coated backplates to stand up to corrosion. 

    "Short" style pumps came on all factory small block V8s from 1955 to 1968. However, this pump will fit all S/B Chevys up to 1985.

    NOTE: This pump is designed primarily for street use and should not exceed 5,500 RPM.

    Small Block Chevy Water Pump Installation Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.  

  • Speedway Small Block Chevy Short Aluminum Water Pump, Plain
    Speedway Small Block Chevy Short Aluminum Water Pump, Plain
    x
                

    Speedway Short Aluminum water pumps flow 35 gallons per minute at 4,000 RPM, with minimal cavitation and proportionally increased flow rates at 5,000 RPM and above. Equalized water flow distribution and pressure-balanced water passages minimize internal engine hot-spots making these pumps an excellent alternative for not only light duty racing, but also marine, trucks, towing, and motorhome applications. Cruisers and hot rodders will appreciate the improved cooling at low speeds.

    "Short" style pumps came on all factory small block V8s from 1955 to 1968. However, this pump will fit all S/B Chevys up to 1985.

    910-15546 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.   

  • Speedway Small Block Chevy Short Aluminum Water Pump, Polished
    Speedway Small Block Chevy Short Aluminum Water Pump, Polished
    x
                

    Speedway Short Aluminum water pumps flow 35 gallons per minute at 4,000 RPM, with minimal cavitation and proportionally increased flow rates at 5,000 RPM and above. Equalized water flow distribution and pressure-balanced water passages minimize internal engine hot-spots making these pumps an excellent alternative for not only light duty racing, but also marine, trucks, towing, and motorhome applications. Cruisers and hot rodders will appreciate the improved cooling at low speeds.

    "Short" style pumps came on all factory small block V8s from 1955 to 1968. However, this pump will fit all S/B Chevys up to 1985.

    910-15545 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.   

  • Snow White Small Block Ford Shorty Water Pump, 2-Groove Pulley
    Snow White Small Block Ford Shorty Water Pump, 2-Groove Pulley
    x
                
    • Positions lower hose (inlet) on the passenger side (1-3/4" diameter)
    • Allows use of a Chevy style radiator
    • 2" shorter than stock Ford pump 
    • Weighs 13.75 lbs. less than stock cast iron pump set-up
    • Fits 1963-1988 Ford 302 and 351 (Cleveland or Windsor)
    • Includes standard aluminum water pump
    • Aluminum adapter included
    • Machined aluminum 2-groove crank pulley and 1-groove water pump pulley
  • Moroso 63500 Small Block Chevy Aluminum Short Water Pump
    Moroso 63500 Small Block Chevy Aluminum Short Water Pump
    x
                

    Moroso first pioneered the aluminum water pump for racing over 15 years ago. Over the years, continual improvements have resulted in providing the best cooling system components available for competition use.

    • Computer designed housing cast from 356-T6 aluminum
    • Lightweight impeller maintains consistent coolant temp throughout the water jacket
    • Low-drag impeller adds 14HP @ 7,500 RPM 
    • Includes integral cam stop boss
    • Overall length of 5.603" from rear mounting face to hub face  

    Fits 1955-1968 “Short” design 5/8" shaft S/B Chevy appliactions. Note: Pump will not clear a billet 910-11040 timing cover.

    545-63500 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.    

  • Small Block Chevy Polished Ribbed Aluminum Short Water Pump
    Small Block Chevy Polished Ribbed Aluminum Short Water Pump
    x
                

    Accents any small block Chevy installation. "Short" style (1955-1968) with 5⁄8" shaft and dual bolt pattern hub. 1⁄2" NPT ports at the top and inlet side for heater hose hook-up. Inlet accepts 1-3⁄4" radiator hoses.

    Small Block Chevy Water Pump Installation Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.

Goto Previous PagePrevious Page
1 2 3 4 5