Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"shock mount support" Page 1 of 3

  • Coil-Over Shock Mount Support
    From: $12.99
    Product Rating: 4.39 Stars
    Coil-Over Shock Mount Support
    x
                

    Speedway sells the ONLY fully engineered shock mount. The 5/8" forged button head bolt looks good while offering maximum support.  The 1-3/4" x 1-3/4" billet aluminum support spacer has internal threads. This allows you to properly support this shock without crushing the bushing like others do, which leads to shock failures. There's a reason major chassis builders use this mount.

    • Billet aluminum
    • 4-1/2" from base of head to end of threads
    • 1-1/4" shock mount base
    • Safely mounts to brackets 1/2" thick
    • Includes required washers and nylon lock nut
    • Mounts sold individually

    916-36010 Instructions (PDF)

  • Speedway Weld-On Roll Cage Shock Mount
    Speedway Weld-On Roll Cage Shock Mount
    x
                

    Weld-on shock mount for bearing end shocks (spherical bearings or heim). Has a 1/2" hole.

    • Contoured to fit onto 1.5" outside diameter tubing
    • Can easily be altered to fit on 1.625", 1.750" or even 2" diameter tubing

    Without modification, this bracket will accept a shock eye with a maximum width of 1". If the installer cuts away part of the support bushing, this bracket would accept a shock eye that is 1.375" wide.

    Note: Pin # 910-07300 won't fit this bracket.

  • 1962-67 Chevy II Nova Bolt-On Gasser Axle Suspension Kit
    1962-67 Chevy II Nova Bolt-On Gasser Axle Suspension Kit
    x
                Please view the product's page for more information
            
  • Speedway Mustang II Crossmember for 1947-54 Chevy Pickup Frame, Kit
    Speedway Mustang II Crossmember for 1947-54 Chevy Pickup Frame, Kit
    x
                Please view the product's page for more information
            
  • Speedway 1927 Track-T Roadster Kit
    Speedway 1927 Track-T Roadster Kit
    x
                

    With their exciting, racy styling, Track T roadsters are some of the most recognizeable hot rods in American automotive history. Designed for nostalgic originality, Speedway’s Track-T Roadster is an economical way to relive that vintage motoring spirit. This kit car turns heads wherever it goes with its beautiful, one-piece 1927 T body, smooth lines and custom track style nose.  The Track-T is designed to use the powertrain from 4-cylinder or V6 powered rear wheel drive vehicles.  In such a small, lightweight car they become mighty spirited performers.

    The 1927 Track-T basic kit includes a 1927 Model T Roadster body with right and left full length side frame covers and custom floor with transmission tunnel.  It also comes with a passenger compartment rear bulkhead divider, street rodder nose, rear roll pan, smooth flat cowl/firewall and front shock mounts.  Headlight mounts, hood top, and aluminum hood sides are also included. The storage compartment behind the seat is even large enough to accept 2-3 suitcases, or a large cooler & picnic basket. 

    The rigid tube steel chassis features front & rear kick-ups for a lower ride height and includes pre-mounted suspension bracketry. The chassis is built to accomodate a traditional spring-over, tube axle front suspension with Hairpin radius rods, Vega cross steering, and '49-'54 Chevy spindles. Rear suspension mounts will

  • Speedway 1933-34 Ford Mustang II Crossmember
    Speedway 1933-34 Ford Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • 1932 Lo-Boy Roadster Frame Assembly
    1932 Lo-Boy Roadster Frame Assembly
    x
                Please view the product's page for more information
            
  • Narrow Birdcage with Shock Mounts
    Narrow Birdcage with Shock Mounts
    x
                

    Sometimes there just isn't enough room to get everything where you want it. This birdcage has been narrowed to 2-1/4" wide, to give you more clearance. 

    For 3" tube axle.  

  • 1935-40 Ford Bolt-In Rear Shock Crossmember Support Bar
    1935-40 Ford Bolt-In Rear Shock Crossmember Support Bar
    x
                These rear shock crossmembers are bolt-in style and are designed to work with 1935-40 Fords.  They bolt directly to the rear frame rails to allow you to mount your shocks safely and securely.
    • For 1935-40 Fords
    • Bolts into rear frame rails
    • Mount your shocks safely and securely
    • Steel construction
  • Heidts 1947-54 Chevy Truck Econo Mustang II Crossmember
    Heidts 1947-54 Chevy Truck Econo Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • Deluxe 1923 T-Bucket Frame Kit
    From: $2,699.99
    Deluxe 1923 T-Bucket Frame Kit
    x
                

    The all new Deluxe T frame is engineered to deliver the ultimate ride and handling of any T-bucket chassis! An exclusive triangulated four-bar rear suspension with coilover shocks and urethane bushings provides unparalleled adjustability and traction control, plus better ride quality than any other T-bucket chassis on the market. It's paired with urethane-bushed four-bars supporting the spring-behind-axle front suspension. The Deluxe '23 T sets a new standard for the next generation of T-buckets!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.  

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Plain Steel
    Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Plain Steel
    x
                

    Features heavy wall 21-1/2" rods with plain steel brackets. Exclusive sandwich-style brackets give greater bar support and incorporate a multi-position lower coil-over mount. 

    Complete kit includes: mild steel rods, steel brackets, bushed rod ends, and hardware. Lower coil-over shock mount stud not included. The nuts & bolts supplied in this kit are NOT polished or plated.

    • Rod length is 21-1/2"
    • Center-to-center of 4-bar eyelets is 5.5"
    • Bracket width is 1.39"

    This kit comes in two varieties:

    • TA - to fit narrow frames such as Model T or Model A
    • 3234 - to fit wider frames such as 1932-1934 Ford

    Note:  Four bar rear suspension kits require the use of a side to side control such as a panhard bar or a watts link component.

    916-49055 Instructions (PDF)

  • M&W Adjustable Jacobs Ladder
    $54.99
    $69.99
    M&W Adjustable Jacobs Ladder
    x
                New Jacobs ladder has three mounting holes to allow you to tighten or loosen your car quickly at the track.
            
  • Speedway 1941-1948 Ford Mustang II Deluxe Steel Crossmember
    Speedway 1941-1948 Ford Mustang II Deluxe Steel Crossmember
    x
                Please view the product's page for more information
            
  • Deluxe 1923 T-Bucket Frame Kit w/ Standard Body and Bed, No Floor
    Deluxe 1923 T-Bucket Frame Kit w/ Standard Body and Bed, No Floor
    x
                The all new Deluxe T frame is engineered to deliver the ultimate ride and  handling of any T-bucket chassis! An exclusive triangulated four-bar rear  suspension with coilover shocks and urethane bushings provides unparalleled  adjustability and traction control, plus better ride quality than any other  T-bucket chassis on the market. It's paired with urethane-bushed four-bars  supporting the spring-behind-axle front suspension. The Deluxe '23 T sets a new  standard for the next generation of T-buckets! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Deluxe 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Channeled Floor
    Deluxe 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Channeled Floor
    x
                The all new Deluxe T frame is engineered to deliver the ultimate ride and  handling of any T-bucket chassis! An exclusive triangulated four-bar rear  suspension with coilover shocks and urethane bushings provides unparalleled  adjustability and traction control, plus better ride quality than any other  T-bucket chassis on the market. It's paired with urethane-bushed four-bars  supporting the spring-behind-axle front suspension. The Deluxe '23 T sets a new  standard for the next generation of T-buckets! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Deluxe 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Flat Floor
    Deluxe 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Flat Floor
    x
                The all new Deluxe T frame is engineered to deliver the ultimate ride and  handling of any T-bucket chassis! An exclusive triangulated four-bar rear  suspension with coilover shocks and urethane bushings provides unparalleled  adjustability and traction control, plus better ride quality than any other  T-bucket chassis on the market. It's paired with urethane-bushed four-bars  supporting the spring-behind-axle front suspension. The Deluxe '23 T sets a new  standard for the next generation of T-buckets! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Deluxe 1923 T-Bucket Frame Kit w/ Deluxe Body and Bed, Unchanneled Floor
    Deluxe 1923 T-Bucket Frame Kit w/ Deluxe Body and Bed, Unchanneled Floor
    x
                The all new Deluxe T frame is engineered to deliver the ultimate ride  and handling of any T-bucket chassis! An exclusive triangulated four-bar  rear suspension with coilover shocks and urethane bushings provides  unparalleled adjustability and traction control, plus better ride  quality than any other T-bucket chassis on the market. It's paired with  urethane-bushed four-bars supporting the spring-behind-axle front  suspension. The Deluxe '23 T sets a new standard for the next generation  of T-buckets! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

    If ordering the body kit without a floor (715-3200), please note that the door will not be hung. If you order a body kit with a floor (715-3211 or 715-3221), the door will be fitted & hung on its hinges before shipping.

  • Deluxe 1923 T Frame Kit w/ Deluxe Body and Bed, Channeled Floor
    Deluxe 1923 T Frame Kit w/ Deluxe Body and Bed, Channeled Floor
    x
                The all new Deluxe T frame is engineered to deliver the ultimate ride  and handling of any T-bucket chassis! An exclusive triangulated four-bar  rear suspension with coilover shocks and urethane bushings provides  unparalleled adjustability and traction control, plus better ride  quality than any other T-bucket chassis on the market. It's paired with  urethane-bushed four-bars supporting the spring-behind-axle front  suspension. The Deluxe '23 T sets a new standard for the next generation  of T-buckets! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

    If ordering the body kit without a floor (715-3200), please note that the door will not be hung. If you order a body kit with a floor (715-3211 or 715-3221), the door will be fitted & hung on its hinges before shipping.

  • Speedway 1955-1959 Chevy Truck Crossmember
    Speedway 1955-1959 Chevy Truck Crossmember
    x
                Please view the product's page for more information
            
  • Deluxe 1923 T-Bucket Frame Kit w/ Deluxe Body and Bed, No Floor
    Deluxe 1923 T-Bucket Frame Kit w/ Deluxe Body and Bed, No Floor
    x
                The all new Deluxe T frame is engineered to deliver the ultimate ride and handling of any T-bucket chassis! An exclusive triangulated four-bar rear suspension with coilover shocks and urethane bushings provides unparalleled adjustability and traction control, plus better ride quality than any other T-bucket chassis on the market. It's paired with urethane-bushed four-bars supporting the spring-behind-axle front suspension. The Deluxe '23 T sets a new standard for the next generation of T-buckets! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

    If ordering the body kit without a floor, please note that the door will not be hung. If you order a body kit with a floor (715-3211 or 715-3221), the door will be fitted & hung on its hinges before shipping.

  • Weld On Coil-Shock Lower Link Mount
    Weld On Coil-Shock Lower Link Mount
    x
                        These coil/shocks lower link mounts locate strut tube to rear end housing. Mounts shock and slider assembly. Fits 3" axle tube.  Weld-on style.


  • AFCO 20140 Coil-Over Tube Clamp Bracket, 5 Inch Drop
    AFCO 20140 Coil-Over Tube Clamp Bracket, 5 Inch Drop
    x
                

    Bracket fastens on rear axle and mounts coil-overs so that axle wrap tends to load or unload tires closest to clamps.

    • For 3" axle tubes.
    • The drop on this is 5”, that is a measurement from the center of axle housing to the bottom of the shock mount.
    • The shock mount is 1/2” for a standard racing shock eye lit size.
    • The clamp width is 1-3/4”. 
  • 1948-1952 Ford Truck Speedway Deluxe Mustang II Crossmember
    1948-1952 Ford Truck Speedway Deluxe Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • Heidts 1955-59 Chevy Truck Econo Mustang II Crossmember
    Heidts 1955-59 Chevy Truck Econo Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • 1978-88 GM Metric Chassis 9 Inch Ford Axle Bracket Kit
    1978-88 GM Metric Chassis 9 Inch Ford Axle Bracket Kit
    x
                

    Weld these brackets to your 9" Ford housing and install it in your 1978-1988 GM Metric chassis. Includes upper and lower control arm mounts, and weld-on caliper brackets for use with Metric calipers. Welding is required. Designed for 3-1/2" axle tubes, but can be fit to 3" tubes. 

    This kit is NOT IMCA Hobby Stock legal but is IMCA Stock Car approved. 

  • Heidts Mustang II Crossmember for 1935-40 Ford Frame, Weld-On Assembly
    Heidts Mustang II Crossmember for 1935-40 Ford Frame, Weld-On Assembly
    x
                Please view the product's page for more information
            
  • AFCO 20141 Coil-Over Tube Clamp Bracket, 7 Inch Drop
    AFCO 20141 Coil-Over Tube Clamp Bracket, 7 Inch Drop
    x
                

    Bracket fastens on rear axle and mounts coil-overs so that axle wrap tends to load or unload tires closest to clamps.

    • For 3" axle tubes.
    • The drop on this is 7”, that is a measurement from the center of axle housing to the bottom of the shock mount.
    • The shock mount is 1/2” for a standard racing shock eye lit size.
    • The clamp width is 1-3/4”. 
  • Carrera 9007-112 Coil-Over Snap Ring for 2 Inch Body Shock
    Carrera 9007-112 Coil-Over Snap Ring for 2 Inch Body Shock
    x
                

    Replacement snap ring for all Carrera coil-over shocks with 2" O.D. body.

    255-1931 Instructions (PDF)

  • '64-'70 Mustang Crossmember
    $299.99
    Product Rating: 5.00 Stars
    '64-'70 Mustang Crossmember
    x
                Please view the product's page for more information
            
  • Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Stainless Steel
    Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Stainless Steel
    x
                

    Features heavy wall 21-1/2" rods with plain steel brackets. Exclusive sandwich-style brackets give greater bar support and incorporate a multi-position lower coil-over mount.  Four bar rear suspension kits require the use of a side to side control such as a panhard bar or a watts link component.

    Complete kit includes: polished stainless steel rods, steel brackets, bushed rod ends, and hardware. Lower coil-over shock mount stud not included. The nuts & bolts supplied in this kit are NOT polished or plated.

    • Rod length is 21-1/2"
    • Center-to-center of 4-bar eyelets is 5.5"
    • Bracket width is 1.39"

    This kit comes in two varieties:

    • TA - to fit narrow frames such as Model T or Model A
    • 3234 - to fit wider frames such as 1932-1934 Ford

    1932-1934 Four Bar Rear Suspension Instructions (PDF)

    Note: Please be advised that the rods in this kit are shown in a plain steel finish in the alternative photos but do come with a stainless finish as shown in primary photo.

  • Speedway Mustang II Crossmember-Ford Frame-35-40 Car-35-41 Pickup-DLX
    Speedway Mustang II Crossmember-Ford Frame-35-40 Car-35-41 Pickup-DLX
    x
                Please view the product's page for more information
            
  • Heidts Mustang II Crossmember for 1964-1970 Ford Mustang Frame, Weld-On Kit
    Heidts Mustang II Crossmember for 1964-1970 Ford Mustang Frame, Weld-On Kit
    x
                Please view the product's page for more information
            
  • Wehrs Machine WM200LRB Lightweight Left Rear Steel Bearing Birdcage
    Wehrs Machine WM200LRB Lightweight Left Rear Steel Bearing Birdcage
    x
                

    Steel roller bearing birdcages have a split plate design to allow for repairs without removing the entire hub. Standard model comes with angled shock drop with a no bind swivel. Bottom hole is 4-1/2” down from centerline of housing and top is 4-1/2” up but features multiple holes to change the rate at which the birdcage indexes. Also allows for various shock and spring mounting locations for ultimate turn ability.

  • Wehrs Machine WM200RRB Lightweight Right Rear Steel Bearing Birdcage
    Wehrs Machine WM200RRB Lightweight Right Rear Steel Bearing Birdcage
    x
                

    Steel roller bearing birdcages have a split plate design to allow for repairs without removing the entire hub. Standard model comes with angled shock drop with a no bind swivel. Bottom hole is 4-1/2” down from centerline of housing and top is 4-1/2” up but features multiple holes to change the rate at which the birdcage indexes. Also allows for various shock and spring mounting locations for ultimate turn ability.

  • Coilover Mounting Kit, 1.63 Inch Body
    Coilover Mounting Kit, 1.63 Inch Body
    x
                

    For all Carrera coil over shocks with 1.63" O.D. body. Use with 2-1/2" I.D. springs.

    • Overall length of threaded sleeve is 4"
    • Length of threaded area is 3-3/8"
    • O.D. is nearly 2"
    • I.D. is nearly 1-11/16"

    255-1951 Instructions (PDF)

Goto Previous PagePrevious Page
1 2 3