Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"sbc intake valve" Page 1 of 3

  • Enginequest IMCA/WISSOTA Small Block Chevy Cylinder Heads
    Enginequest IMCA/WISSOTA Small Block Chevy Cylinder Heads
    x
                This head is engraved and serial numbered by  Engine Quest for IMCA's Sport Mods, Stock Cars, and Hobby Stocks. Now  approved for WISSOTA Midwest Mods and Street Stocks.

    Assembled heads will include the following:
    • 3/8" screw in studs # 915-99156
    • 76 cc combustion chamber
    • 167 cc intake runners
    • Straight plug
    • 1.94/1.50 intake/exhaust valves #910-14140-1 & 910-14145-1
    • Available bare or assembled and blue printed
    • Heavy duty valves
    • Retainers and locks # 915-39741 & 577-555
    • 1.25" high-performance valve springs # 180-671515
    • Three angle valve job


  • Speedway Super Duty Stainless Steel Intake Valve, 1.94 Inch, Std. Length
    Speedway Super Duty Stainless Steel Intake Valve, 1.94 Inch, Std. Length
    x
                

    These are high strength, one-piece stainless steel valves that are priced for a claimer motor, but superior to most mid-priced valves. Features a chrome stem and hardned tip. Undercut and swirl polished heads for increased flow. For small block Chevy. 

    • Chrome stems and hard tips
    • For: Small Block Chevy
    • High strength one-piece design
    • Undercut and swirl-polished heads for increased flow
    • Sold each

    Note: These standard length valves will work in Vortec heads unless you're running a roller cam and longer springs in which case you will need additional length on the valves.

  • World S/R Small Block Chevy Cylinder Heads, Straight Plug, 1.94/1.50 Valves
    World S/R Small Block Chevy Cylinder Heads, Straight Plug, 1.94/1.50 Valves
    x
                Please view the product's page for more information
            
  • Flo-Tek 102505 Assembled S/B Chevy Aluminum Heads, Straight Plug
    Flo-Tek 102505 Assembled S/B Chevy Aluminum Heads, Straight Plug
    x
                

    You don't sacrifice quality for a low price - get both with a set of Flo-Tek aluminum cylinder heads. These Chevy aluminum heads are loaded with high end features like bronze valve guides, multi angle valve job, and 3/8" screw-in rocker studs with guideplates. These are a pre-1986 design small block Chevy cylinder head with a standard exhaust port design.

    Heads are sold each.

    • 180cc intake runners
    • 62cc exhaust runners
    • 64cc combustion chambers
    • 2.02" and 1.60" stainless steel valves
    • High performance springs for .550" lift
    • Compatible with most flat tappet camshafts
    • Five angle valve job
    • Bronze guides
    • Straight plug
    • 3/8" screw-in studs and guide plates
    • Port for temperature probe
    • Works well with most flat tappet street cams

    Flow Numbers:

    • Valve Lift     .400"     .500"     .600"
    • Intake           206       237       244   
    • Exhaust        165       177       187
  • Three Plain 9 Super 7   Carbs on 1957-86 Small Block Chevy Edelbrock Intake
    Three Plain 9 Super 7 Carbs on 1957-86 Small Block Chevy Edelbrock Intake
    x
                

    This tri power kit uses the Edelbrock C-357-B S/B Chevy 3x2 intake with Speedway's 9 Super 7® carbs. It has progressive linkage to give you good driveability and economy, but power when you need it. The manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. (idle-5500 rpm)

    Kit includes three carbs, the intake, air cleaners, linkage kit, fuel block, fittings and red fuel line. Assembly required. Fits 1957-1986 Chevy 262-400 c.i.d. small-block Chevys.

    9 Super 7® Linkage Instructions (PDF)

    Note: Not applicable to an HEI based distributor system due to a clearance issue. This system must be used in conjunction with a small diameter based distributor.

    The 9Super7 Carb  makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required to do so with our kits is a Uni-Syn syncing tool and a little patience. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both prima

  • GM Performance 425 Horsepower ZZ383 Long Block, Small Block Chevy Engine
    New
    GM Performance 425 Horsepower ZZ383 Long Block, Small Block Chevy Engine
    x
                Please view the product's page for more information
            
  • Speedway Super Duty Stainless Steel Intake Valve, 2.02 Inch, Std. Length
    Speedway Super Duty Stainless Steel Intake Valve, 2.02 Inch, Std. Length
    x
                

    These are high strength, one-piece stainless steel valves that are priced for a claimer motor, but superior to most mid-priced valves. Features a chrome stem and hardned tip. Undercut and swirl polished heads for increased flow. For small block Chevy. 

    Sold each.

  • Flo-Tek 101505 Assembled Small Block Chevy Aluminum Heads, Angle Plug
    Flo-Tek 101505 Assembled Small Block Chevy Aluminum Heads, Angle Plug
    x
                

    You don't sacrifice quality for a low price - get both with a set of Flo-Tek aluminum cylinder heads. These Chevy aluminum heads are loaded with high end features like bronze valve guides, Multi angle valve job, and 3/8" screw-in rocker studs with guideplates. These are a pre-1986 design small block Chevy cylinder head.

    Heads are sold each.

    • 180cc intake runners
    • 62cc exhaust runners
    • 64cc combustion chambers
    • 2.02" and 1.60" stainless steel valves
    • High performance springs for .550" lift
    • Compatible with most flat tappet camshafts
    • Multi angle valve job
    • Bronze guides
    • 3/8" screw-in studs and guide plates
  • GM Performance 12499529 Small Block Chevy 350/290 Long Block Engine
    GM Performance 12499529 Small Block Chevy 350/290 Long Block Engine
    x
                Please view the product's page for more information
            
  • Blueprint BP3830CT1 383 Small Block Chevy Vortec Head Crate Engine
    Blueprint BP3830CT1 383 Small Block Chevy Vortec Head Crate Engine
    x
                Please view the product's page for more information
            
  • Edelbrock 7501 Performer RPM Air-Gap Small Block Chevy Intake Manifold
    Edelbrock 7501 Performer RPM Air-Gap Small Block Chevy Intake Manifold
    x
                

    Designed for 1955-86 262-400 c.i.d. Chevrolet V8s, the award-winning RPM Air-Gap incorporates the same race-winning technology that's used on the Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.

    Manifold features rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all 1976 and later alternator and A/C brackets for the street. The heater outlet boss is angled for proper fit over the valve cover. The temp sensor boss clears all waternecks.

    • For square-bore carburetors only
    • No provision for exhaust-heated chokes and no exhaust crossover
    • Not for 1987 and later cast iron heads
    • Will not fit under stock Corvette hood

    325-7501 Instructions (PDF)

  • Speedway Super Duty Stainless Steel Intake Valve, 2.055 Inch, .100 Inch Longer
    Speedway Super Duty Stainless Steel Intake Valve, 2.055 Inch, .100 Inch Longer
    x
                

    These are high strength, one-piece stainless steel valves that are priced for a claimer motor, but superior to most mid-priced valves. Features a chrome stem and hardned tip. Undercut and swirl polished heads for increased flow. For small block Chevy. 

    Sold each.

  • Flo-Tek 101500 Bare Small Block Chevy Aluminum Heads, Angle Plug
    Flo-Tek 101500 Bare Small Block Chevy Aluminum Heads, Angle Plug
    x
                

    You don't sacrifice quality for a low price - get both with a set of Flo-Tek aluminum cylinder heads. These Chevy aluminum heads are loaded with high end features like bronze valve guides and a multi angle valve job. These are a pre-1986 design small block Chevy cylinder head. Sold each.

    • 180cc intake runners
    • 62cc exhaust runners
    • 64cc combustion chambers
    • Machined for 3/8" screw-in studs
    • Machined for 2.02"/1.60" valves
    • Ready for assembly
  • Flo-Tek 102500 Bare Small Block Chevy Aluminum Heads, Straight Plug
    Flo-Tek 102500 Bare Small Block Chevy Aluminum Heads, Straight Plug
    x
                

    You don't sacrifice quality for a low price - get both with a set of Flo-Tek aluminum cylinder heads. These Chevy aluminum heads are loaded with high end features like bronze valve guides and a multi angle valve job. These are a pre-1986 design small block Chevy cylinder head. Sold each.

    • 180cc intake runners
    • 62cc exhaust runners
    • 64cc combustion chambers
    • Machined for 3/8" screw-in studs
    • Machined for 2.02"/1.60" valves
    • Ready for assembly
  • GM Performance 19210007 Small Block Chevy 350/330 HP Long Block Engine
    GM Performance 19210007 Small Block Chevy 350/330 HP Long Block Engine
    x
                Please view the product's page for more information
            
  • Manley 11844-1 Super Duty Stainless Steel Intake Valve, 2.08 In, .1 In
    Manley 11844-1 Super Duty Stainless Steel Intake Valve, 2.08 In, .1 In
    x
                

    These are high strength, one-piece stainless steel valves that are priced for a claimer motor, but superior to most mid-priced valves. Features a chrome stem and hardned tip. Undercut and swirl polished heads for increased flow. For small block Chevy. 

    Sold each.

  • Speedway Super Duty Stainless Steel Intake Valve, 2.02 Inch, .100 Inch Longer
    Speedway Super Duty Stainless Steel Intake Valve, 2.02 Inch, .100 Inch Longer
    x
                

    These are high strength, one-piece stainless steel valves that are priced for a claimer motor, but superior to most mid-priced valves. Features a chrome stem and hardned tip. Undercut and swirl polished heads for increased flow. For small block Chevy. 

    Sold each.

  • Speedway Super Duty Stainless Steel Intake Valve, 2.055 Inch, Std. Length
    Speedway Super Duty Stainless Steel Intake Valve, 2.055 Inch, Std. Length
    x
                

    These are high strength, one-piece stainless steel valves that are priced for a claimer motor, but superior to most mid-priced valves. Features a chrome stem and hardned tip. Undercut and swirl polished heads for increased flow. For small block Chevy. 

    Sold each.

  • Manley 11818-1 Std. Super Duty Stainless Steel Intake Valve, 2.08 Inch
    Manley 11818-1 Std. Super Duty Stainless Steel Intake Valve, 2.08 Inch
    x
                

    These are high strength, one-piece stainless steel valves that are priced for a claimer motor, but superior to most mid-priced valves. Features a chrome stem and hardned tip. Undercut and swirl polished heads for increased flow. For small block Chevy. 

    Sold each.

  • Speedway Super Duty Stainless Steel Intake Valve, 1.94 Inch, .100 Inch Longer
    Speedway Super Duty Stainless Steel Intake Valve, 1.94 Inch, .100 Inch Longer
    x
                

    These are high strength, one-piece stainless steel valves that are priced for a claimer motor, but superior to most mid-priced valves. Features a chrome stem and hardned tip. Undercut and swirl polished heads for increased flow. For small block Chevy.

    Sold each.

  • Small Block Chevy Upper Alternator Bracket, Plain
    Small Block Chevy Upper Alternator Bracket, Plain
    x
                

    Positions alternator just above the intake, between passenger side valve cover and water outlet. Designed to mount GM "Delco" alternators on S/B Chevy V8 using '55-'68 short style water pumps.

    Alternator Bracket Illustration (GIF)

    916-67899 Instructions (PDF)

  • Dart Iron Eagle Assembled Chevy Heads, Angle Plug, 215cc/64cc
    Dart Iron Eagle Assembled Chevy Heads, Angle Plug, 215cc/64cc
    x
                

    These complete Dart Iron Eagle Platinum cylinder heads are professionally assembled right here at Speedway Motors. We offer three different versions of each head (Street Ready, Flat Tappet Ready, Roller Ready) to perfectly suit your racing needs.

    • Standard 23 degree valve angle
    • Standard port location and intake bolt pattern fit most manifolds
    • Pushrod holes enlarged for clearance with high ratio rocker arms
    • Heart shaped chambers improve combustion efficiency
    • Multi-angle intake seats and radiused exhaust seats dramatically increase airflow
    • Hardened exhaust seats compatible with unleaded gasoline
    • Manganese bronze intake valve guides and phosphorous bronze exhaust valve guides extend cylinder head life
    • Spark plug holes are machined for tapered seat 5/8" hex "peanut" spark plugs
    • Dual bolt pattern accepts flange mount and center bolt valve covers

    Head Application Chart (GIF)

    Roller Ready - Please specify cam lift in comments section when ordering.

  • Three Chrome 9 Super 7   Carbs, 1957-86 Small Block Chevy Edelbrock Intake
    Three Chrome 9 Super 7 Carbs, 1957-86 Small Block Chevy Edelbrock Intake
    x
                

    This tri power kit uses the Edelbrock C-357-B S/B Chevy 3x2 intake with Speedway's 9 Super 7® carbs. It has progressive linkage to give you good driveability and economy, but power when you need it. The manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. (idle-5500 rpm)

    Kit includes three chrome plated carbs, the plain finish aluminum intake, 4" chrome air cleaners, linkage kit, chrome fuel block, fittings and red fuel line. Assembly required. Fits 1957-1986 Chevy 262-400 c.i.d. small-block Chevys.

    9 Super 7® Linkage Instructions (PDF)

    Note: Not applicable to an HEI based distributor system due to a clearance issue. This system must be used in conjunction with a small diameter based distributor.

    The 9Super7 makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required to do so with our kits is a Uni-Syn syncing tool and a little patience. Our 3 Carb kits come with one primary carburetor and two secondary carbure

  • Dart Iron Eagle Assembled Chevy Heads, Angle Plug, 215cc/49cc
    Dart Iron Eagle Assembled Chevy Heads, Angle Plug, 215cc/49cc
    x
                Please view the product's page for more information
            
  • GM Performance 19201330 Small Block Chevy ZZ4 350 Turn-Key Crate Engine
    GM Performance 19201330 Small Block Chevy ZZ4 350 Turn-Key Crate Engine
    x
                Please view the product's page for more information
            
  • Dart Iron Eagle Assembled Chevy Heads, Straight Plug, 200cc/64cc
    Dart Iron Eagle Assembled Chevy Heads, Straight Plug, 200cc/64cc
    x
                

    These complete Dart Iron Eagle Platinum cylinder heads are professionally assembled right here at Speedway Motors. We offer three different versions of each head (Street Ready, Flat Tappet Ready, Roller Ready) to perfectly suit your racing needs.

    • Standard 23 degree valve angle
    • Standard port location and intake bolt pattern fit most manifolds
    • Pushrod holes enlarged for clearance with high ratio rocker arms
    • Heart shaped chambers improve combustion efficiency
    • Multi-angle intake seats and radiused exhaust seats dramatically increase airflow
    • Hardened exhaust seats compatible with unleaded gasoline
    • Manganese bronze intake valve guides and phosphorous bronze exhaust valve guides extend cylinder head life
    • Spark plug holes are machined for tapered seat 5/8" hex "peanut" spark plugs
    • Dual bolt pattern accepts flange mount and center bolt valve covers

    Head Application Chart (GIF)

    Roller Ready - Please specify cam lift in comments section when ordering.

  • Dart Iron Eagle Assembled Chevy Heads, Angle Plug, 200cc/49cc
    Dart Iron Eagle Assembled Chevy Heads, Angle Plug, 200cc/49cc
    x
                

    These complete Dart Iron Eagle Platinum cylinder heads are professionally assembled right here at Speedway Motors. We offer three different versions of each head (Street Ready, Flat Tappet Ready, Roller Ready) to perfectly suit your racing needs.

    • Standard 23 degree valve angle
    • Standard port location and intake bolt pattern fit most manifolds
    • Pushrod holes enlarged for clearance with high ratio rocker arms
    • Heart shaped chambers improve combustion efficiency
    • Multi-angle intake seats and radiused exhaust seats dramatically increase airflow
    • Hardened exhaust seats compatible with unleaded gasoline
    • Manganese bronze intake valve guides and phosphorous bronze exhaust valve guides extend cylinder head life
    • Spark plug holes are machined for tapered seat 5/8" hex "peanut" spark plugs
    • Dual bolt pattern accepts flange mount and center bolt valve covers

    Head Application Chart (GIF)

    Roller Ready - Please specify cam lift in comments section when ordering.

  • SuperSeal Small Block Chevy Overhaul Gasket Set, 350 Chevy '67 -'85
    SuperSeal Small Block Chevy Overhaul Gasket Set, 350 Chevy '67 -'85
    x
                SuperSeal standard rebuild gasket sets feature composite head gaskets, intake, water pump, valve cover, front cover and seal, oil pan and rear main seal.
            
  • Dart Iron Eagle Assembled Chevy Heads, Angle Plug, 200cc/64cc
    Dart Iron Eagle Assembled Chevy Heads, Angle Plug, 200cc/64cc
    x
                

    These complete Dart Iron Eagle Platinum cylinder heads are professionally assembled right here at Speedway Motors. We offer three different versions of each head (Street Ready, Flat Tappet Ready, Roller Ready) to perfectly suit your racing needs.

    • Standard 23 degree valve angle
    • Standard port location and intake bolt pattern fit most manifolds
    • Pushrod holes enlarged for clearance with high ratio rocker arms
    • Heart shaped chambers improve combustion efficiency
    • Multi-angle intake seats and radiused exhaust seats dramatically increase airflow
    • Hardened exhaust seats compatible with unleaded gasoline
    • Manganese bronze intake valve guides and phosphorous bronze exhaust valve guides extend cylinder head life
    • Spark plug holes are machined for tapered seat 5/8" hex "peanut" spark plugs
    • Dual bolt pattern accepts flange mount and center bolt valve covers

    Head Application Chart (GIF)

    Roller Ready - Please specify cam lift in comments section when ordering.

    Iron Eagle Tech Notes (PDF)

    Dart Installation Note (

  • Small Block Chevy Upper Alternator Bracket, Chrome
    Small Block Chevy Upper Alternator Bracket, Chrome
    x
                

    Positions alternator just above the intake, between passenger side valve cover and water outlet. Designed to mount GM "Delco" alternators on S/B Chevy V8 using '55-'68 short style water pumps.

    Alternator Bracket Illustration (GIF)

    916-67905 Instructions (PDF)

  • BluePrint 383 Small Block Chevy Crate Engine
    BluePrint 383 Small Block Chevy Crate Engine
    x
                Please view the product's page for more information
            
  • Dart 127311 SHP 200CC Bare Engine Cylinder Head, Straight, S/B Chevy
    Dart 127311 SHP 200CC Bare Engine Cylinder Head, Straight, S/B Chevy
    x
                The SHP is cast from A356-T6 aluminum and designed  to work with most off the shelf components, so you won’t need to worry  about acquiring costly custom components.
    • Bolt on compatibility: Standard valve angle and spacing are retained to allow use of off the shelf pistons and valve train components
    • Multi-angle intake seats and radiused exhaust seats dramatically increase air/fuel flow
    • Hardened exhaust seats are compatible with unleaded gasoline
    • Manganese bronze valve guides extend cylinder head life
    • All cylinder heads sold individually
    • Configuration: Bare
    • Combustion Chamber Volume: 64cc
    • Intake Port Volume: 180cc
    • Intake & Exhaust Valves: 2.02/1.60 Valve Job
    • Valve Springs: None
    • Spark Plugs: Straight Plugs
  • Weiand 7136WIN 1955-1986 Small Block Chevy Blower Intake Manifolds
    Weiand 7136WIN 1955-1986 Small Block Chevy Blower Intake Manifolds
    x
                

    If you already have a blower and drive, we offer just the intake. Adapt 6-71 superchargers to Small Block Chevy. Cast aluminum, they feature an integral pop-off valve and utilize stock-type thermostats and housings.

  • RHS SBC Cast Iron Cylinder Heads, Angle Plug, 200cc/64cc, Street Ready
    RHS SBC Cast Iron Cylinder Heads, Angle Plug, 200cc/64cc, Street Ready
    x
                

    These heads deliver significant gains in both power and torque for all Small Block Chevy applications - right out of the box. Available for a variety of applications (see chart). All heads feature a multi-angle Serdi valve job.

    • Standard port 23° head
    • Accepts standard Chevy rocker arms and valve train components
    • Advanced port/runner/chamber design & modified water jacket for optimal performance & added reliability
    • Multi-angle intake & radiused exhaust valve seats for up to 5% more airflow 
    • 200cc recommended for 327-350 c.i. up to 400+ HP
    • 220cc recommended for 383-400+ c.i. up to 550+ HP

    Application Chart (GIF)

    Roller Ready - Please specify cam lift when ordering. 

    Complete heads are made to order, please allow 3-4 days to assemble.

  • RHS SBC Cast Iron Cylinder Heads, Angle Plug, 220cc/50cc, Street Ready
    RHS SBC Cast Iron Cylinder Heads, Angle Plug, 220cc/50cc, Street Ready
    x
                

    These heads deliver significant gains in both power and torque for all Small Block Chevy applications - right out of the box. Available for a variety of applications (see chart). All heads feature a multi-angle Serdi valve job.

    • Standard port 23° head
    • Accepts standard Chevy rocker arms and valve train components
    • Advanced port/runner/chamber design & modified water jacket for optimal performance & added reliability
    • Multi-angle intake & radiused exhaust valve seats for up to 5% more airflow 
    • 200cc recommended for 327-350 c.i. up to 400+ HP
    • 220cc recommended for 383-400+ c.i. up to 550+ HP

    Application Chart (GIF)

    Roller Ready - Please specify cam lift when ordering. 

    Complete heads are made to order, please allow 3-4 days to assemble.

  • Dart 127121 SHP 180CC Assembled Engine Cylinder Head-Small Block Chevy
    Dart 127121 SHP 180CC Assembled Engine Cylinder Head-Small Block Chevy
    x
                The Dart SHP Cylinder Head is cast from A356-T6 aluminum and designed  to work with most off the shelf components, so you won’t need to worry  about acquiring costly custom components.
    • Bolt on compatibility: Standard valve angle and spacing are retained to allow use of off the shelf pistons and valve train components
    • Multi-angle intake seats and radiused exhaust seats dramatically increase air/fuel flow
    • Hardened exhaust seats are compatible with unleaded gasoline
    • Manganese bronze valve guides extend cylinder head life
    • Assembled with 1.250 diameter valve springs
    • Straight spark plug configuration
    180cc intake runner, 64cc combustion chamber, 2.02/1.60 valves, 1.250 diameter springs for flat tappet camshafts.
  • Dart 127322 SHP 200CC Assembled Engine Cylinder Head-Small Block Chevy
    Dart 127322 SHP 200CC Assembled Engine Cylinder Head-Small Block Chevy
    x
                The Dart SHP Cylinder Head is cast from A356-T6 aluminum and designed  to work with most off the shelf components, so you won’t need to worry  about acquiring costly custom components.
    • Bolt on compatibility: Standard valve angle and spacing are retained to allow use of off the shelf pistons and valve train components
    • Multi-angle intake seats and radiused exhaust seats dramatically increase air/fuel flow
    • Hardened exhaust seats are compatible with unleaded gasoline
    • Manganese bronze valve guides extend cylinder head life
    • Assembled with 1.437 diameter valve springs
    • Straight spark plug configuration
    Complete head 200cc intake runner 64CC combustion chamber
    2.02/1.60 valves hydraulic roller springs 1.437 diameter
  • Small Block Chevy Inboard Alternator Bracket
    Small Block Chevy Inboard Alternator Bracket
    x
                We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, and polished billet aluminum brackets to make this a simple installation.

    Inboard (high) mount brackets for early cars, meaning it will place the alternator up high between the intake manifold and valve cover. Mounts the alternator on the driver's side.


    Note: S/B Chevy, short style water pump only.
  • Edelbrock 75014 RPM Air-Gap S/B Chevy Intake Manifold, Endurashine
    Edelbrock 75014 RPM Air-Gap S/B Chevy Intake Manifold, Endurashine
    x
                

    Designed for 1955-86 262-400 c.i.d. Chevrolet V8s, the award-winning RPM Air-Gap incorporates the same race-winning technology that's used on the Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.

    Manifold features rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all 1976 and later alternator and A/C brackets for the street. The heater outlet boss is angled for proper fit over the valve cover. The temp sensor boss clears all waternecks.

    • For square-bore carburetors only
    • No provision for exhaust-heated chokes and no exhaust crossover
    • Not for 1987 and later cast iron heads
    • Will not fit under stock Corvette hood

    325-75014 Instructions (PDF)

  • Small Block Chevy Upper Alternator Bracket, Stainless
    Small Block Chevy Upper Alternator Bracket, Stainless
    x
                

    Positions alternator just above the intake, between passenger side valve cover and water outlet. Designed to mount GM "Delco" alternators on S/B Chevy V8 using '55-'68 short style water pumps.

    Alternator Bracket Illustration (GIF)

    916-67899 Instructions (PDF)

Goto Previous PagePrevious Page
1 2 3