Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"rubber valve cover" Page 1 of 2

  • SuperSeal Small Block Chevy Valve Cover Gaskets, Pre 1986
    SuperSeal Small Block Chevy Valve Cover Gaskets, Pre 1986
    x
                

    Small Block Chevy (SBC) valve cover gaskets made with a stainless steel frame sandwiched between durometer-tested neoprene rubber. Eliminates leakage caused by internal pressure fluctuations. Won't tear or collapse.

    Reusuable. Package of two. 

    SuperSeal Illustration (GIF)

     

  • Small Block Chevy Valve Cover Gaskets, Vortec Heads
    Small Block Chevy Valve Cover Gaskets, Vortec Heads
    x
                

    Rubber valve cover gasket set for 283-400 cubic inch Small Block Chevy (SBC) with vortec heads.

  • Offenhauser 2731 1937-62 Chevy Six Cylinder Valve Cover
    Offenhauser 2731 1937-62 Chevy Six Cylinder Valve Cover
    x
                

    We have these hard-to-find covers for your 1937-1962 Chevrolet 216, 235 and 261 engines. These Chevy 6 cylinder finned aluminum Offenhauser valve covers will shine up your old Stovebolt. 

    NOTE: To use on 1954-1962 inline six head, you will need to supply a 1937-1953 style gasket, a pair of washers and stud seals typical of '37-'53, and a pair of acorn nuts to fit the long studs that come with the cover. This cover is a direct replacement for the 1937-1953 Chevy.

  • Fel-Pro Gaskets 1613 1962-86 S/B Ford 260-351W Valve Cover Gaskets
    Fel-Pro Gaskets 1613 1962-86 S/B Ford 260-351W Valve Cover Gaskets
    x
                Blue Stripe, 3/16" cork-rubber valve cover gaskets for 1962-1986 Ford, Mercury V8 260, 289, 302 (except "BOSS") and 351W V-8. 
            
  • Valve Cover Hold Down Clamps
    From: $5.99
    Product Rating: 5.00 Stars
    Valve Cover Hold Down Clamps
    x
                Set of eight for small block Chevy hold down clamps. Available in Zinc or Chrome and are 5" long overall.
            
  • SuperSeal Small Block Ford Valve Cover Gaskets
    SuperSeal Small Block Ford Valve Cover Gaskets
    x
                

    Small Block Ford (SBF) valve cover gasket made with stainless steel frame sandwiched between durometer-tested neoprene rubber. Eliminates leakage caused by internal pressure fluctuations. Won't tear or collapse.

    Reusuable. Package of two. 

    SuperSeal Illustration (GIF)

  • Fel-Pro 1604 Small Block Chevy Valve Cover Gaskets-5/16 In Cork/Rubber
    Fel-Pro 1604 Small Block Chevy Valve Cover Gaskets-5/16 In Cork/Rubber
    x
                Fel-Pro Blue Stripe premium quality Small Block Chevy (SBC) valve cover gaskets.
            
  • SuperSeal Big Block Chevy Valve Cover Gaskets
    SuperSeal Big Block Chevy Valve Cover Gaskets
    x
                

    Big Block Chevy (BBC) valve cover gasket made with stainless steel frame sandwiched between durometer-tested neoprene rubber. Eliminates leakage caused by internal pressure fluctuations. Won't tear or collapse.

    Reusuable. Package of two.

    SuperSeal Illustration

  • Speedway 1960-86 Small Block Chevy Valve Cover Gaskets
    Speedway 1960-86 Small Block Chevy Valve Cover Gaskets
    x
                

    Our durable small block Chevy cork valve cover gaskets will work on any street or race engine. Gaskets fit '60-'86 "straight" bolt heads.

  • Billet Valve Cover O-Ring Oil Fill
    Billet Valve Cover O-Ring Oil Fill
    x
                This is a handy little item. Basically, it's a bolt-in breather opening for a valve cover that can be used to install a breather cap, an oil fill cap, or a breather with a PCV valve. 

    To install this item, you must make a 1-7/16" hole in the valve cover. You may want to purchase 91011033, our billet breather and/or 91011034, our billet PCV valve.
  • Speedway Small Block Chevy Valve Cover Gaskets, Extra Thick
    Speedway Small Block Chevy Valve Cover Gaskets, Extra Thick
    x
                

    Our durable small block Chevy cork valve cover gaskets will work on any street or race engine. Features a 5/16" extra thick cork/neoprene blend.

  • COMP Cams NG4011 LS Valve Cover Adapters
    COMP Cams NG4011 LS Valve Cover Adapters
    x
                

    These adaptors allow you to put 1960-'86 S/B Chevy valve covers on your LS engine. CNC-machined from billet aluminum, the SBC Valve Cover Adapter Kit features an O-ring channel for reuse of stock LS valve cover seals, as well as featuring the same oil-deflecting lip on the spacer. Compatible with all LS valve train components, rockers and springs.

    Hardware is included. Use with coil pack relocation harness (at right).

  • Fel-Pro 1606 B/B Chevy Valve Cover Gaskets 3/16 Inch w/ Non-Steel Core
    Fel-Pro 1606 B/B Chevy Valve Cover Gaskets 3/16 Inch w/ Non-Steel Core
    x
                

    Premium quality Fel-Pro Blue Stripe Big Block Chevy (BBC) valve cover gaskets.

    • 3/16" (.188") Cork Rubber
    • Will not fit Super Duty Head manufactured by Pontiac
  • Fel-Pro Gaskets FS7525B 1949-53 Flathead Ford V8 Overhaul Gasket Set
    Fel-Pro Gaskets FS7525B 1949-53 Flathead Ford V8 Overhaul Gasket Set
    x
                

    If you're going to overhaul your Flathead, you're going to need new gaskets. This complete overhaul gasket set is for 1949-1953 Ford and Mercury flathead V8 engines. Includes all the necessary gaskets and seals you need for a typical engine rebuild.

    • High-quality gaskets for a leak-free engine
    • Modern composition head gaskets
    • Head gaskets will fit bores up to 3-3/16" (3.270")
    • Set includes gaskets for:
      • Cylinder Heads
      • Oil Pan
      • Rear Seal
      • Water Pumps
      • Front Packing
      • Fuel Pump
      • Water Necks
      • Timing Cover
      • Valve Seals
      • Intake Manifold
      • Exhaust Manifolds
  • Replacement O-Ring for Center Bolt Valve Cover Adapter
    Replacement O-Ring for Center Bolt Valve Cover Adapter
    x
                

    These quality Nitrile o-ring seals are replacement for our center bolt valve cover adapters 91017157.

    • Nitrile o-ring
    • Replacement for 910-17157 
    • Sold each
  • GM Performance Replacement Valve Cover Gaskets for 602/604 Crate Engine
    GM Performance Replacement Valve Cover Gaskets for 602/604 Crate Engine
    x
                Replace those old or leaking valve cover gaskets in your Chevy  602/604 engines with these  quality rubber replacement gaskets.  They are GM Factory replacement and  are sold each. 
    • GM factory replacement 
    • Chevy 602/604 crate engines
    • Sold each
  • 1974-88 Ford 2.3L Valve Cover Gasket
    1974-88 Ford 2.3L Valve Cover Gasket
    x
                

    Racing valve cover gasket for 1974-1988 Ford 2.3L applications.

  • Best Gasket RS663G 1964-1967 429 Cadillac Gasket Set
    Best Gasket RS663G 1964-1967 429 Cadillac Gasket Set
    x
                

    Complete rebuild gasket set for 1964-1967 Cadillac 429 V8. Includes the following gaskets:

    • Graphtite™ Head Gaskets
    • Air Cleaner to Carburetor
    • Carburetor Base
    • Distributor Base
    • Exhaust Manifold Center
    • Exhaust Manifold End
    • Exhaust Pipe Flange
    • Exhaust Pipe Flange, 67
    • Fuel Pump Mounting
    • Intake Manifold
    • Oil Filter Mounting
    • Oil Filter Support Bracket
    • Oil Pan Drain Plug, 63-65
    • Oil Pan Drain Plug, 66-67
    • Oil Pan Front
    • Oil Pan Rear
    • Oil Pan Side
    • Oil Pump Cover, 63-65
    • Oil Pump Cover, 66-67
    • Oil Pump Screen Cover
    • Rear Main Seal-Rubber
    • Thermostat Housing
    • Timing Cover
    • Timing Cover Seal
    • Valley Cover
    • Valve Cover
    • Valve Stem Seal
    • Valve Stem Seal
    • Ventilator Tube
    • Water Outlet to Water Pump
    • Water Pump Mounting
    • Water Pump to Head
  • Push-In Valve Cover Breather With Shield
    Push-In Valve Cover Breather With Shield
    x
                

    These washable, push-in pleated gauze valve cover breathers are available with a shield. The formed rubber nipple pushes into a 1.22" valve cover hole.

  • Fel-Pro 1648 S/B Chevy Valve Cover Gaskets, 1987-Up Centerbolt Heads
    Fel-Pro 1648 S/B Chevy Valve Cover Gaskets, 1987-Up Centerbolt Heads
    x
                Fel-Pro Blue Stripe premium quality Small Block Chevy (SBC) valve cover gaskets.
            
  • Fel-Pro 1603 Small Block Chevy Valve Cover Gaskets-Blue Stripe-7/32 In
    Fel-Pro 1603 Small Block Chevy Valve Cover Gaskets-Blue Stripe-7/32 In
    x
                Fel-Pro Blue Stripe premium quality Small Block Chevy (SBC) valve cover gaskets.
            
  • Fel-Pro P1628 Small Block Chevy Valve Cover Gaskets-1/4 Inch
    Fel-Pro P1628 Small Block Chevy Valve Cover Gaskets-1/4 Inch
    x
                Fel-Pro Blue Stripe premium quality Small Block Chevy (SBC) valve cover gaskets.
            
  • SuperSeal 1976-85 Chevy 305 Complete Gasket Set
    SuperSeal 1976-85 Chevy 305 Complete Gasket Set
    x
                

    SuperSeal Chevy gaskets are for 2-piece rear main blocks. Oil pan gasket can be used with either RH or LH dipsticks and includes both thin and thick seals. Valve cover gaskets are 5/16" rubberized cork suitable for racing.

    • Suitable for engines up to 600 h.p. 
    • Intake Gasket: 1205 style, 1.28" x 2.09"
    Gasket Set Includes:
    • Valve Cover
    • Timing Cover
    • Head Gasket
    • Intake Gasket
    • Oil Pan Gaskets
    • Front Seal
    • Rear Seal
    • Water Pump
    • Distributor
    • Fuel Pump
    • Fuel Pump Block 
  • Small Block Chevy Valve Cover Gaskets, 5/16 Inch Extra Thick
    Small Block Chevy Valve Cover Gaskets, 5/16 Inch Extra Thick
    x
                

    Cork valve cover gasket set for 283-400 cubic inch Small Block Chevy (SBC).

  • Mr Gasket 177 Big Block Chevy Valve Cover Gaskets
    Mr Gasket 177 Big Block Chevy Valve Cover Gaskets
    x
                

    Made from high grade cork granules and a neoprene binder, these gaskets will not shrink or stick and provide excellent flange sealing and durability. These gaskets can be reused.

    Fits BB Chevy 396-454 V-8.

  • Grommets for Push-In Oil Breathers, 1-1/4 Inch O.D., 1 Inch I.D.
    Grommets for Push-In Oil Breathers, 1-1/4 Inch O.D., 1 Inch I.D.
    x
                

    Our replacement 1-1/4" grommets are made of a black neoprene material for extended service life. Can be used as a plug, or a grommet for push-in style oil breather caps by trimming off the bottom.

    Fits into a 1-1/4" valve cover hole.

  • Threaded Steel Weld Bung Fitting, 1/4 Inch NPT Female
    Threaded Steel Weld Bung Fitting, 1/4 Inch NPT Female
    x
                

    We offer these premium-quality weld-in bungs for a variety of uses. They're CNC-machined from steel and are great for oil or fuel tanks, radiators, valve covers, manifolds, and rear axle housings.

    Female weld bung fittings available in steel.  1/4 Inch NPT works well with rubber round pedal pad (part number 91031200) to mount pedal stud. 

    Threaded Steel Weld Bung Fitting

    • 1/4 Inch NPT

    Fitting Thread Application Chart (GIF)

     

  • SuperSeal Small Block Chevy Overhaul Gasket Set, 400 Chevy '70 -'81
    SuperSeal Small Block Chevy Overhaul Gasket Set, 400 Chevy '70 -'81
    x
                SuperSeal standard rebuild gasket sets feature composite head gaskets, intake, water pump, valve cover, front cover and seal, oil pan and rear main seal.
            
  • Fel-Pro Gaskets FS7548B 1939-1948 Flathead V8 Overhaul Gasket Set
    Fel-Pro Gaskets FS7548B 1939-1948 Flathead V8 Overhaul Gasket Set
    x
                

    You can't overhaul your Flathead without new gaskets. This overhaul gasket set is for 1939-48 Ford and Mercury V8 and comes complete with all the necessary gaskets and seals you need for a typical engine rebuild.

    Includes modern composition head gaskets. The head gaskets will fit bores up to 3-3/16".

    Kit includes the following gaskets:

    • Cylinder Heads
    • Oil Pan
    • Rear Seal
    • Water Pump
    • Front Packing
    • Fuel Pump
    • Water Neck
    • Timing Cover
    • Valve Seals
    • Intake and Exhaust Gaskets

     

  • Valve Cover Oil Filler Cap
    $19.99
    Valve Cover Oil Filler Cap
    x
                Universal, Billet Aluminum Screw-in Type for 1.3750" ID hole, Billet Aluminum  Screw-in Type, Black Anodized, with O-ring seals
            
  • Fel-Pro Gaskets FS8255PT 472-500 Cadillac Gasket Set
    Fel-Pro Gaskets FS8255PT 472-500 Cadillac Gasket Set
    x
                

    This Fel-Pro 1968-1976 Cadillac 472-500 V8 gasket kit sets include premium-quality head gaskets, exhaust gaskets, valve cover gaskets, oil pan gaskets, valve stem seals, and all accessory gaskets--everything that you need for a complete engine rebuild, all in one affordable set.

    • Full set does not include the intake gasket set.

    Kit fits:

    • Calais '68-'76
    • Commercial Chassis '75-'76
    • Deville '68-'76
    • Eldorado '68-'76
    • Fleetwood '68-'76
  • Push-In Style Oil Breather Caps
    Push-In Style Oil Breather Caps
    x
                Each chrome push-in style oil breather cap fits factory and after market valve covers with a 1-1/4" diameter hole, with rubber grommet. 
            
Goto Previous PagePrevious Page
1 2