Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"rubber line hose" Page 1 of 4

  • Rubber Brake Line Hose Set for 7/16 Inch-20 Calipers
    Rubber Brake Line Hose Set for 7/16 Inch-20 Calipers
    x
                

    These front brake hoses are designed for 1955-1974 GM front disc brake conversions using stock-style 1969-1988 GM single-piston calipers.

    For 7/16"-20 calipers. This hose comes with banjo bolts, but not crush washers.

  • DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5
    DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
  • Rubber Brake Line Hose Set for 10mm-1.5 Calipers
    Rubber Brake Line Hose Set for 10mm-1.5 Calipers
    x
                

    These 15" front brake hoses are designed for 1955-1974 GM front disc brake conversions using stock-style 1969-1988 GM single-piston calipers.

    Note: Hose banjo bolts sold separately.

  • DOT Braided Stainless Brake Hose, 1969-77 GM, 7/16-20
    DOT Braided Stainless Brake Hose, 1969-77 GM, 7/16-20
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
  • Insulated Brake Line Tube Clamps, Bag/10
    Insulated Brake Line Tube Clamps, Bag/10
    x
                

    You will need these rubber coated fuel line tube clamps and brake line clamps to finish your plumbing job. These tube clamps are made from zinc plated steel, are easy to work with, durable, and corrosion resistant. Choose from a full range of sizes.

    10 clamps per package.

  • Rubber Front Brake Lines & Fitting Kit, 7/16-20
    Rubber Front Brake Lines & Fitting Kit, 7/16-20
    x
                

    Stop guessing which banjo fittings go with which brake lines. With this kit you get two rubber front brake lines, two banjo bolts with seals, and a pair of easy-to-install brake line tabs and clips.

    • 18" lines including fittings
    • 3/8"-24 IFF and 7/16"-20

    Lines are 18" in length. Features 3/8"-24 IFF at the chassis fitting to accept 3/16" brake line.

  • Rubber Front Brake Lines & Fitting Kit, 10mm-1.5
    Rubber Front Brake Lines & Fitting Kit, 10mm-1.5
    x
                

    Stop guessing which banjo fittings go with which brake lines. With this kit you get two rubber front brake lines, two banjo bolts with seals, and a pair of easy to install brake line tabs and clips.

    • 15" length including fittings
    • 3/8"-24 IFF and 10mm-1.5
    • For 1978-1988 GM Calipers

    Lines are 15" in length. Features 3/8"-24 IFF at the chassis fitting to accept 3/16" brake line.

  • Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump
    Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump
    x
                

    Our standard power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits. This set adapts a 1982-1988 T-Bird/Cougar rack or our 91034340-POW rack to a GM style pump. Return hose will normally need to be cut to length.

    The pressure line in this kit has an inverted flare fitting at the pump end along with a 14mm O-ring fitting on the rack end. It also comes with an adaptor so that it can work with an O-ring style (metric) pump fitting. We suggest using power steering pumps 91032922-GM or 910-32908.

    Kit includes:

    • Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting.
    • The fittings that go into the 1982-1988 T-bird rack which are 14mm O-ring (high pressure) and 16mm O-ring (low pressure return) with the smaller O-ring fitting hose end being the pressure side for the rack.

     

    910-32535 Instructions (PDF)

    91032535 CPP Instructions (PDF) 

  • DOT Braided Stainless Brake Hoses, GM/Ford, 7/16-20
    DOT Braided Stainless Brake Hoses, GM/Ford, 7/16-20
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
    • Used to connect from hard line on rear axle to rear calipers when changing from drum to disc brakes
  • DOT Braided Stainless Brake Hoses, Mustang II, 7/16-24
    DOT Braided Stainless Brake Hoses, Mustang II, 7/16-24
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
  • LS1 Complete Fuel Delivery Kit
    $169.99
    Product Rating: 4.40 Stars
    LS1 Complete Fuel Delivery Kit
    x
                

    To make your LS1 transplant a little less painful, we put together these kits for you. If you already have a fuel pump in the tank, use the filter/regulator kit 910-12800.

    This kit includes a high pressure MSD in-line pump capable of 43 gph @ 40 psi or 39 gph @ 80 psi, a filter/regulator assembly, and all necessary fittings (including fuel rail fitting). Pump draws only 5.4 amps and supports up to 500 horsepower. Pump features 3/8" hose barb inlet and 5/16" barb outlet.

    Hose and additional fittings sold separately. MSD pump requires the use of 5/16" high pressure rubber hose with appropriate fuel injection hose clamps for the pressure side of the pump.

  • Stainless Braided 19 Inch Front Brake Hoses, 10mm-1.5
    Stainless Braided 19 Inch Front Brake Hoses, 10mm-1.5
    x
                These steel braided front brake lines are 19" overall length. They are for common 1978-1988 GM metric style calipers and include 10mm x 1.5 banjo fittings for one end and have 3/8"-24 inverted flare female on the other. Stainless steel braid significantly reduces hose expansion under pressure, which results in a firmer pedal feel versus rubber hoses.
            
  • Aeroquip FBU0600 Starlite Hose, -6 AN
    Aeroquip FBU0600 Starlite Hose, -6 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Starlite hose can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. Works great as a fuel line of gasoline and alcohol fuels.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Edelbrock 8126 Performer Carb Fuel Line Kit, 3/8 Inch Hose Barb Inlet
    Edelbrock 8126 Performer Carb Fuel Line Kit, 3/8 Inch Hose Barb Inlet
    x
                

    These 3/8” fuel line kits have a clean look and are easy to install. These fuel inlets for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. The 325-8126 includes a barbed end for a push-on 3/8" rubber fuel line. The 325-8131 includes an aluminum fuel filter with a 40 micron filter element and -6 AN female inlet will accept an Edelbrock fuel line kit for a complete fuel-pump to carburetor plumbing solution. They are manufactured of chrome plated steel and include a 5/8" -20 threaded banjo bolt with gaskets.

    Fuel Line Kit Instruction Sheet (PDF)

  • Black Push-On Hose, -10 AN
    From: $12.99
    Black Push-On Hose, -10 AN
    x
                

    AN10 black push-on hose. Ideal for fuel line applications only - NOT suited for oil or water use exceeding temperatures of 200° F.

    • Working Temp:  -40 to +200 degrees F
    • Max Pressure:  150 psi
    • Compatible with gasoline, alcohol, & diesel fuels
    • Choose lengths of 3, 6, 10, 15, or 20 feet.
    • Use with Speedway brand push-on fittings
    • When using at temp and pressures at the high of the parameter, hose clamps should be utilized.

    Hose Fitting Sizing Chart (GIF)

  • Black Push-On Hose, -8 AN
    From: $10.99
    Product Rating: 3.00 Stars
    Black Push-On Hose, -8 AN
    x
                

    AN8 black push-on hose. Ideal for fuel line applications only - NOT suited for oil or water use exceeding temperatures of 200° F.

    • Working Temp:  -40 to +200 degrees F
    • Max Pressure:  150 psi
    • Compatible with gasoline, alcohol, & diesel fuels
    • Choose lengths of 3, 6, 10, 15, or 20 feet.
    • Use with Speedway brand push-on fittings
    • When using at temp and pressures at the hig end of the parameter, hose clamps shoudl be utilized.

    Hose Fitting Sizing Chart (GIF)

  • Speedway Edelbrock Mechanical Fuel Pump Fuel Line Kit
    Speedway Edelbrock Mechanical Fuel Pump Fuel Line Kit
    x
                

    This pump-to-carb fuel line kit will get you the -8 AN hose, hose end fittings and mechanical fuel pump fitting if required. Choose from push-on steel or aluminum fittings with blue hose, or aluminum fittings with stainless steel braided hose. Comes with -8 AN hose only.

    Fitting sizes listed indicate fuel pump outlet fitting size.

    Style Choice Guide:

    • Alu - aluminum fittings with blue rubber hose
    • Ss - aluminum fittings with stainless steel hose
    • Stl - steel fittings with blue rubber hose
  • Aeroquip Special Application Socketless AN Hose, Blue
    Aeroquip Special Application Socketless AN Hose, Blue
    x
                
  • Textile braid reinforcement
  • Low pressure design for use with socketless reuseable fittings only
  • No hose clamp necessary
  • Ideal hose for fuel line applications
  • 50,000 ft of hose in stock!

    Construction: AQP elastomer tube, textile braid reinforcement, blue AQP elastomer cover.

    Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

    Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

    Aeroquip Hose Sizing Guide (GIF)

  • Hose Fitting Sizing Chart (GIF)

  • Neoprene Hose and Fitting Kit for Remote Oil Filter, 48 Inch
    Neoprene Hose and Fitting Kit for Remote Oil Filter, 48 Inch
    x
                

    Kit includes enough -8 AN push-on neoprene/rubber hose (1/2" I.D.) to run two 48" lines from your oil filter block adapter to your remote oil filter bracket. Also includes two 1/2" NPT hose ends, two -8 AN hose ends and two 1/2" NPT to -8 AN steel fittings.

  • 1955-64 Chevy Power Steering Hose Kit
    1955-64 Chevy Power Steering Hose Kit
    x
                

    Rubber power steering hose kit for 500, 600, & 605 series power steering boxes. Our power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits. Return hose will normally need to be cut to length. 

    • 11/16"-18 inverted flare fine (pressure fitting)
    • 5/8"-18 inverted flare fine (return fitting)
    Note:  Power Steering Hose Kit for Small Blocks Only
  • Removable Brake Tab for Rubber Hose
    Removable Brake Tab for Rubber Hose
    x
                

    This brake line tab is designed to work only with our 6178568 and 6178569 rubber brake hoses. The I.D. of the tab has a unique shape, similar to that of an OEM brake tab.

    Fits many OEM hoses for 1969-1988 GM calipers. Sold as a pair and includes two retainer clips.

  • Black Push-On Hose, -6 AN
    From: $9.99
    Product Rating: 5.00 Stars
    Black Push-On Hose, -6 AN
    x
                

    AN6 black push-on hose. Ideal for fuel line applications only - NOT suited for oil or water use exceeding temperatures of 200° F.

    • Working Temp:  -40 to +200 degrees F
    • Max Pressure:  150 psi
    • Compatible with gasoline, alcohol, & diesel fuels
    • Choose lengths of 3, 6, 10, 15, or 20 feet.
    • Use with Speedway brand push on fittings
    • When using at temp and pressure at the high end of the parameter, hose clamps should be utilized.

    Hose Fitting Sizing Chart (GIF)

  • Blue Push-On Hose, -10 AN
    From: $12.99
    Blue Push-On Hose, -10 AN
    x
                
    • Blue push-on hose, AN10 (also available in AN6, 8 and 12 sizes below)
    • Working temperature of -40 to +200 deg
    • 150 psi max pressure
    • Ideal for fuel line applications only
    • Not suited for oil or water applications exceeding temperatures of 200 degrees
    • Use with Speedway brand push-on fittings
    • When using at temp and pressures at the high end of the parameter, hose clamps should be utilized.

    Hose Fitting Sizing Chart (GIF)

  • Blue Push-On Hose, -12 AN
    From: $17.99
    Blue Push-On Hose, -12 AN
    x
                
    • Blue push-on hose, AN12 size (available in AN6, 8 and 10 sizes below)
    • Working temperature of -40 to +200 deg
    • 150 psi max pressure
    • Ideal for fuel line applications only
    • Not suited for oil or water applications exceeding temperatures of 200 degrees
    • Use with Speedway brand push-on fittings
    • When using at temp and pressures at the high end of the parameter, hose clamps should be utilized.

    Hose Fitting Sizing Chart (GIF)

  • Blue Push-On Hose, -6 AN
    From: $9.99
    Product Rating: 5.00 Stars
    Blue Push-On Hose, -6 AN
    x
                
    • Blue push-on hose available in AN6, 8, 10 and 12 sizes
    • Working temperature of -40 to +200 deg
    • 150 psi max pressure
    • Ideal for fuel line applications only
    • Not suited for oil or water applications exceeding temperatures of 200 degrees
    • Use with Speedway brand push-on fittings
    • When using at temp and pressures at the high end fo the parameter, hose clamps should be utilized.

    Hose Fitting Sizing Chart (GIF)

  • Blue Push-On Hose, -8 AN
    From: $10.99
    Product Rating: 5.00 Stars
    Blue Push-On Hose, -8 AN
    x
                
    • Blue push-on hose available in AN6, 8, 10 and 12 sizes
    • Working temperature of -40 to +200 deg
    • 150 psi max pressure
    • Ideal for fuel line applications only
    • Not suited for oil or water applications exceeding temperatures of 200 degrees
    • Use with Speedway brand push-on fittings
    • When using at temp and pressures at the high end of the parameter, hose clamps should be utilized.

    Hose Fitting Sizing Chart (GIF)

  • Aeroquip Stainless Steel Braided Low Pressure Hose, 9/16 Inch ID, -10 AN
    Aeroquip Stainless Steel Braided Low Pressure Hose, 9/16 Inch ID, -10 AN
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race fuel line applications.

    • Applications include fuel, lube, coolant, air
    • 750 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • Street Rod Fuel Cell -6 AN Pick-up w/ 14 Inch Hose
    Street Rod Fuel Cell -6 AN Pick-up w/ 14 Inch Hose
    x
                

    This fuel cell fuel pick-up kit includes a 14" length of blue rubber -6 AN push-on hose,  a -6 AN push-on hose fitting, -6 AN flared bulkhead fitting w/ nut, and HDPE sealing washers. Works great with our Street Rod Fuel Cells.

    Hose Fitting Sizing Chart (GIF)

  • Black Push-On Hose, -12 AN
    From: $17.99
    Product Rating: 5.00 Stars
    Black Push-On Hose, -12 AN
    x
                

    AN12 black push-on hose. Ideal for fuel line applications only - NOT suited for oil or water use exceeding temperatures of 200° F.

    • Working Temp:  -40 to +200 degrees F
    • Max Pressure:  150 psi
    • Compatible with gasoline, alcohol, & diesel fuels
    • Choose lengths of 3, 6, 10, 15, or 20 feet.
    • Use with Speedway brand push-on fittings
    • When using at temp and pressures at the high end of the parameter, hose clamps should be utilized.

    Hose Fitting Sizing Chart (GIF)

  • Aeroquip FBG0600 FC300 High Pressure Hose, -6 AN, Per Ft.
    Aeroquip FBG0600 FC300 High Pressure Hose, -6 AN, Per Ft.
    x
                

    Aeroquip FC 300 hose is designed for high pressure fluid applications such as power steering line. The FC300 hose features a blue, abrasion-resistant fabric cover over a synthetic rubber inner tube for longer life. This high pressure hose is ideal for power steering, hydraulics, air, fuel and lubricating oil applications.

    • Max operating pressure is 2250 psi
    • Minimum bend radius is 4"
    • Temperature range of -55°F to +300°F
    • Hose is sold by the foot

    Note: The FC300 Hose only works with FC300 steel fittings (not included). Easily assembles with a bench vise and/or wrenches. Ends are reusable.

    AN Thread Sizing Guide (GIF)

    AN 6 Hose Application Chart (GIF)

  • Lokar TD-3AODTM Hi-Tech Transmission Dipstick for Ford AOD, Transmount
    Lokar TD-3AODTM Hi-Tech Transmission Dipstick for Ford AOD, Transmount
    x
                Please view the product's page for more information
            
  • 3/8 Inch Hose for Trans Coolers
    3/8 Inch Hose for Trans Coolers
    x
                This 3/8" I.D. hose is specifically designed for use as an automatic transmission fluid line. Sold per foot.
            
  • Derale 13900 Remote Transmission Cooler Kit
    Derale 13900 Remote Transmission Cooler Kit
    x
                

    With its own air supply, this remote cooler can literally be mounted almost anywhere, making it a popular addition for hot rods, muscle cars, and trucks. An efficient 16-pass tube-and-fin cooler coupled with a Tornado fan and aluminum brackets makes this unit ideal for transmission oil cooling in heavy duty towing and hauling situations. This is a durable, trouble-free way to add years to the life of your transmission.

    • Mounts anywhere space permits
    • Electric fan supplies optimum air flow
    • 16 pass core
    • 650 CFM reversible Tornado electric fan
    • 180° in-line thermostat activates fan
    • Four AN to hose barb adapter fittings
    • 10 feet of OEM spec hose included
    • 16-3/4" wide, 11-1/2" tall, 5" thick
    • Inlet Spacing:  8-3/4"
    • Hose Size:  3/8"
    • Airflow:  Puller (reversible)

    Remote Transmission Cooler Installation Instructions (PDF)

  • Gates 361210 1965-1968 Impala Power Steering Hose
    Gates 361210 1965-1968 Impala Power Steering Hose
    x
                

    These are Gates brand power steering hose assemblies made to OEM specifications. Pressure line assembly includes rubber sleeve, scuff guard, and bracketry for a stable, perfectly aligned fit.

    • (1) .375" Female SAE end
    • (1) .4375" Male Inverted Flare end
    • 24.5" length

    Fits '65-'68 GM B-Body (Impala, Caprice, Biscayne, Bel Air) with 283-327 c.i. V8.

  • Single Banjo Style Fuel Fitting, 5/16 Inch Hose
    Single Banjo Style Fuel Fitting, 5/16 Inch Hose
    x
                

    The cleanest way to plumb your multi carb set-up is to use banjo fittings. These 6061 T-6 aluminum fittings accept 5/16" I.D. hose and work on any carb with 1/2"-20 inlet threads. The Ford/Holley 94 carburetor will require spacers listed, which moves the banjo out to clear the carb body. Your Stromberg 97 style carb or Rochester 2G will not need the spacers.

    Banjo fittings swivel 360 degrees while placing your lines closer to the carbs for maximum linkage clearance. The flange on the bolt slip fits into the banjo body keeping the fitting centered on the bolt. Large undercut on bolt and big hole will give excellent fuel flow. Teflon washers on both sides of the fitting seals the banjo.

    These fittings work on all 2x2, 3x2, 4x2 and 6x2 intakes using Holley 94 or Stromberg 97 carbs. You need one single and one double for a 2x2, one single and two doubles for a 3x2, etc.

    • Makes a perfect job when using rubber or plastic hose
    • Great fitting to use when space is limited
    • Fuel line is held tight to carb sides for maximum linkage clearance
    • Precision made from 6061 T-6 aluminum alloy on a Swiss screw machine
    • 32 micron polished finish
    • Fits all Stromberg 97 - 48 - 81 style carbs, Ford/Holley 94 carbs, and Rochester 2G.
  • S-10 Front Rubber Brake Line
    $17.99
    S-10 Front Rubber Brake Line
    x
                Front rubber brake line for 1982-2002 S-10 pickup calipers.
            
  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3950 Instructions (PDF)

  • Aeroquip Stainless Steel Braided Low Pressure Hose, 7/16 Inch ID, -8 AN
    Aeroquip Stainless Steel Braided Low Pressure Hose, 7/16 Inch ID, -8 AN
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race fuel line applications.

    • Applications include fuel, lube, coolant, air
    • 750 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • Dual Banjo Style Fuel Fitting, 5/16 Inch Hose
    Dual Banjo Style Fuel Fitting, 5/16 Inch Hose
    x
                

    The cleanest way to plumb your multi carb set-up is to use banjo fittings. These 6061 T-6 aluminum fittings accept 5/16" I.D. hose and work on any carb with 1/2"-20 inlet threads. The Ford/Holley 94 carburetor will require spacers listed, which moves the banjo out to clear the carb body. Your Stromberg 97 style carb or Rochester 2G will not need the spacers.

    Banjo fittings swivel 360 degrees while placing your lines closer to the carbs for maximum linkage clearance. The flange on the bolt slip fits into the banjo body keeping the fitting centered on the bolt. Large undercut on bolt and big hole will give excellent fuel flow. Teflon washers on both sides of the fitting seals the banjo.

    These fittings work on all 2x2, 3x2, 4x2 and 6x2 intakes using Holley 94 or Stromberg 97 carbs. You need one single and one double for a 2x2, one single and two doubles for a 3x2, etc.

    • Makes a perfect job when using rubber or plastic hose
    • Great fitting to use when space is limited
    • Fuel line is held tight to carb sides for maximum linkage clearance
    • Precision made from 6061 T-6 aluminum alloy on a Swiss screw machine with a 32 micron polished finish

    Fits all Stromberg 97 - 48 - 81 style carbs, Ford/Holley 94 carbs, and Rochester 2G.

  • Single Banjo Style Fuel Fitting, 3/8 Inch Hose
    Single Banjo Style Fuel Fitting, 3/8 Inch Hose
    x
                

    The cleanest way to plumb your multi carb set-up is to use banjo fittings. These 6061 T-6 aluminum fittings accept 3/8" I.D. hose and work on any carb with 1/2"-20 inlet threads. The Ford/Holley 94 carburetor will require spacers listed, which moves the banjo out to clear the carb body. Your Stromberg 97 style carb or Rochester 2G will not need the spacers.

    Banjo fittings swivel 360 degrees while placing your lines closer to the carbs for maximum linkage clearance. The flange on the bolt slip fits into the banjo body keeping the fitting centered on the bolt. Large undercut on bolt and big hole will give excellent fuel flow. Teflon washers on both sides of the fitting seals the banjo.

    Fits all Stromberg 97 - 48 - 81 style carbs, Ford/Holley 94 carbs, and Rochester 2G.

    These fittings work on all 2x2, 3x2, 4x2 and 6x2 intakes using Holley 94 or Stromberg 97 carbs. You need one single and one double for a 2x2, one single and two doubles for a 3x2, etc.

    • Makes a perfect job when using rubber or plastic hose
    • Great fitting to use when space is limited
    • Fuel line is held tight to carb sides for maximum linkage clearance
    • Precision made from 6061 T-6 aluminum alloy on a Swiss screw machine
    • 32 micron polished finish

     

Goto Previous PagePrevious Page
1 2 3 4