Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"round steel assemblies" Page 1 of 2

  • Hot Rod Nostalgia Steering Column, 30 Inch, Polished Stainless Steel
    Hot Rod Nostalgia Steering Column, 30 Inch, Polished Stainless Steel
    x
                Our original Hot Rod Steering Column has been a huge success, but many rodders said they wanted one with a turn signal.

    The Nostalgia Columns offer a similar vintage look but have modern GM-style turn signal, hazard light and horn functions built into the attractive bell-shaped upper housings.

    Perfect for a wide variety of 1920's through 1950's era rods, as well as Cobras and other kit cars.

    The columns measure 30" long and have 3/4"-36 spline lower shafts. They're available with polished or paintable stainless steel housings.
    • Fits 1969-1994 GM Steering Weel
    • Fits Grant Wheel with Adapter for 1969-1994 GM Steering Wheel
    • 30" long
    • Beautiful Art-Deco styling
    • Polished Stainless steel
    • Turn signal, hazard light and horn functions
  • Hot Rod Nostalgia Steering Column, 30 Inch, Plain Stainless Steel
    Hot Rod Nostalgia Steering Column, 30 Inch, Plain Stainless Steel
    x
                Our original Hot Rod Steering Column has been a huge success, but many rodders said they wanted one with a turn signal.

    The Nostalgia Columns offer a similar vintage look but have modern GM-style turn signal, hazard light and horn functions built into the attractive bell-shaped upper housings.

    Perfect for a wide variety of 1920's through 1950's era rods, as well as Cobras and other kit cars.

    The columns measure 30" long and have 3/4"-36 spline lower shafts. They're available with paintable stainless steel housings.
    • 30" long
    • Beautiful Art-Deco styling
    • Paintable Stainless steel
    • Turn signal, hazard light and horn functions
  • Nostalgia 1923 T-Bucket Frame Kit
    From: $2,499.99
    Product Rating: 5.00 Stars
    Nostalgia 1923 T-Bucket Frame Kit
    x
                

    The Nostalgia T frame is engineered to provide the ultimate in economy and ease of assembly. It features the same spring-behind-axle front suspension as the Budget T, but includes front shock/headlight mounts. The coilover rear suspension uses traditional-style radius rods and a panhard bar, with all necessary mounts welded in place. If you're looking for an affordable, well-engineered T-bucket chassis requiring only basic mechanical skills to assemble, the Nostalgia T is for you! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link) 

    This product requires a 3-4 week build time.

  • Basic 1923 T-Bucket Frame Kit
    From: $1,999.99
    Basic 1923 T-Bucket Frame Kit
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

     

     

  • Deluxe 1923 T-Bucket Frame Kit
    From: $2,699.99
    Deluxe 1923 T-Bucket Frame Kit
    x
                

    The all new Deluxe T frame is engineered to deliver the ultimate ride and handling of any T-bucket chassis! An exclusive triangulated four-bar rear suspension with coilover shocks and urethane bushings provides unparalleled adjustability and traction control, plus better ride quality than any other T-bucket chassis on the market. It's paired with urethane-bushed four-bars supporting the spring-behind-axle front suspension. The Deluxe '23 T sets a new standard for the next generation of T-buckets!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.  

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • 1951-1952 Chevy LED Tail Light Assembly
    1951-1952 Chevy LED Tail Light Assembly
    x
                These completely assembled tail light bezels are for 1951-1952 Chevy passenger cars. They feature a red polycarbonate lens with 16 super bright red LED's. These tail light assemblies are a conversion replacement for your old damaged or missing tail lights. 
    • Red Polycarbonate Lens with 16 Super Bright Red LED's
    • Chrome Zinc Die Cast Bezel with red reflector
    • Epoxy Coated, Fully Sealed Electronics 
    • Fits All Passenger Cars
    • Left or Right side
    • Includes Chrome Housing, Mounting Hardware, Round Reflector, Socket and Wires
    • 12V only
  • 1935-1940 Ford Frame Rail Mount Brake Pedal Assembly
    1935-1940 Ford Frame Rail Mount Brake Pedal Assembly
    x
                

    This kit adapts our brake booster/master cylinder (not included, sold separately at right) to the left frame rail (boxed or open channel) of a reproduction Early Ford frame or one without it's original crossmember. Bracket bolts to frame (slight trimming may be required). Sturdy, steel pedal arm can easily be heated and bent to clear any obstacles your car may have. Round pedal pad screws onto pedal to finish the installation. 

    Pedal assembly kit includes zinc plated bracket, pedal, pedal pad and hardware.

    Will NOT work in conjunction with the factory clutch pedal.  Intended for use with an Automatic Transmission. 

  • 1937-1939 Chevy Frame Rail Mount Pedal Assemblies
    1937-1939 Chevy Frame Rail Mount Pedal Assemblies
    x
                

    This kit adapts our brake booster/master cylinder (not included, sold separately at right) to the left frame rail (boxed or open channel) of a '37-'39 Chevy frame. Bracket bolts to frame (slight trimming may be required). Sturdy, steel pedal arm can easily be heated and bent to clear any obstacles your car may have. Round pedal pad screws onto pedal to finish the installation. 

    Pedal assembly kit includes zinc plated bracket, pedal, pedal pad and hardware.

  • Lokar BAG-6154 Lakester Steel Throttle Pedal Assembly, Raw Finish
    Lokar BAG-6154 Lakester Steel Throttle Pedal Assembly, Raw Finish
    x
                

    Lakester hot rod pedal styling is a continuation of the many nostalgic products we offer at Lokar. The pedals have the same quality you have come to expect from its sister steel spoon throttle pedal and round brake/clutch pad. The removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket. Lakester pedals feature curved pads and arms.

    These new nostalgic style pedals are available in a raw finish. This unique pedal design will give your favorite vehicle an all new look. The throttle pedal is designed using Delrin bushings for smooth operation when throttling up or down during daily use.

    • Hot rod styling
    • Quality steel construction
    • Delrin bushings for smooth operation
    • Splined lower arm can be mounted on the right or left of mounting bracket
    • Raw finish

    4916154 Installation Instructions (PDF)

  • Speedway 1927 Track-T Roadster Kit
    Speedway 1927 Track-T Roadster Kit
    x
                

    With their exciting, racy styling, Track T roadsters are some of the most recognizeable hot rods in American automotive history. Designed for nostalgic originality, Speedway’s Track-T Roadster is an economical way to relive that vintage motoring spirit. This kit car turns heads wherever it goes with its beautiful, one-piece 1927 T body, smooth lines and custom track style nose.  The Track-T is designed to use the powertrain from 4-cylinder or V6 powered rear wheel drive vehicles.  In such a small, lightweight car they become mighty spirited performers.

    The 1927 Track-T basic kit includes a 1927 Model T Roadster body with right and left full length side frame covers and custom floor with transmission tunnel.  It also comes with a passenger compartment rear bulkhead divider, street rodder nose, rear roll pan, smooth flat cowl/firewall and front shock mounts.  Headlight mounts, hood top, and aluminum hood sides are also included. The storage compartment behind the seat is even large enough to accept 2-3 suitcases, or a large cooler & picnic basket. 

    The rigid tube steel chassis features front & rear kick-ups for a lower ride height and includes pre-mounted suspension bracketry. The chassis is built to accomodate a traditional spring-over, tube axle front suspension with Hairpin radius rods, Vega cross steering, and '49-'54 Chevy spindles. Rear suspension mounts will

  • Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body and Bed, No Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body and Bed, No Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and ease of assembly. It features the same spring-behind-axle front suspension as the Budget T, but includes front shock/headlight mounts. The coilover rear suspension uses traditional-style radius rods and a panhard bar, with all necessary mounts welded in place. If you're looking for an affordable, well-engineered T-bucket chassis requiring only basic mechanical skills to assemble, the Nostalgia T is for you! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body/Bed, Channeled Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body/Bed, Channeled Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and  ease of assembly. It features the same spring-behind-axle front suspension as  the Budget T, but includes front shock/headlight mounts. The coilover rear  suspension uses traditional-style radius rods and a panhard bar, with all  necessary mounts welded in place. If you're looking for an affordable,  well-engineered T-bucket chassis requiring only basic mechanical skills to  assemble, the Nostalgia T is for you!  

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body/Bed, Unchanneled Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body/Bed, Unchanneled Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and  ease of assembly. It features the same spring-behind-axle front suspension as  the Budget T, but includes front shock/headlight mounts. The coilover rear  suspension uses traditional-style radius rods and a panhard bar, with all  necessary mounts welded in place. If you're looking for an affordable,  well-engineered T-bucket chassis requiring only basic mechanical skills to  assemble, the Nostalgia T is for you!  

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body and Bed, No Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body and Bed, No Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and  ease of assembly. It features the same spring-behind-axle front suspension as  the Budget T, but includes front shock/headlight mounts. The coilover rear  suspension uses traditional-style radius rods and a panhard bar, with all  necessary mounts welded in place. If you're looking for an affordable,  well-engineered T-bucket chassis requiring only basic mechanical skills to  assemble, the Nostalgia T is for you!  

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body/Bed, Channeled Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body/Bed, Channeled Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and ease of assembly. It features the same spring-behind-axle front suspension as the Budget T, but includes front shock/headlight mounts. The coilover rear suspension uses traditional-style radius rods and a panhard bar, with all necessary mounts welded in place. If you're looking for an affordable, well-engineered T-bucket chassis requiring only basic mechanical skills to assemble, the Nostalgia T is for you! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body/Bed, Unchanneled Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body/Bed, Unchanneled Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and ease of assembly. It features the same spring-behind-axle front suspension as the Budget T, but includes front shock/headlight mounts. The coilover rear suspension uses traditional-style radius rods and a panhard bar, with all necessary mounts welded in place. If you're looking for an affordable, well-engineered T-bucket chassis requiring only basic mechanical skills to assemble, the Nostalgia T is for you! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Sweet Mfg Steering Coupler, 13/16 36 Spline, 3/4 Rnd Non-Flex, Big GM Pre '78
    Sweet Mfg Steering Coupler, 13/16 36 Spline, 3/4 Rnd Non-Flex, Big GM Pre '78
    x
                

    Steel coupler is splined on one end and has a 3/4" round hole on the other.

    Fits big GM gear box for pre 1978 vehicles.

    When ordering, select applicable hole size/spline needed.

    Warning: This coupler is splined 13/16 x 36 all the way through.  It fits OK on 3/4" round shaft for welding, even though it has interior splines.

    Coupler = 2" L x 1.060" D

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3546 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 52-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 52-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3544 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3550 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3548 Instructions (PDF)

  • 1940-48 Chevy Car Frame Rail Mount Pedal Assemblies
    1940-48 Chevy Car Frame Rail Mount Pedal Assemblies
    x
                

    This kit adapts our brake booster/master cylinder (not included) to the left frame rail (boxed or open channel) of a 1940-48 Chevy passenger car frame. Bracket bolts to frame (slight trimming may be required). Sturdy, steel pedal arm can easily be heated and bent to clear any obstacles your car may have. Round pedal pad screws onto pedal to finish the installation. 

    Pedal assembly kit includes zinc plated bracket, pedal, pedal pad and hardware.

  • Basic 1923 T-Bucket Frame Kit w/ Deluxe Body, Channeled Floor
    Basic 1923 T-Bucket Frame Kit w/ Deluxe Body, Channeled Floor
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    Body Dimensions

    • Total Length:  52"
    • Firewall Width:  26.5"
    • Body Width:  45"
    • Body Height:  24"

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

  • Basic 1923 T-Bucket Frame Kit w/ Deluxe Body, No Floor
    Basic 1923 T-Bucket Frame Kit w/ Deluxe Body, No Floor
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    Body Dimensions

    • Total Length:  52"
    • Firewall Width:  26.5"
    • Body Width:  45"
    • Body Height:  24"

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

  • Sweet Mfg. Steering Coupler, 9/16 Inch 26 Spline to 3/4 Inch Round Non-Flex
    Sweet Mfg. Steering Coupler, 9/16 Inch 26 Spline to 3/4 Inch Round Non-Flex
    x
                Steel coupler is splined on one end and has a 3/4" round hole on the other.  

    When ordering, select applicable hole size/spline needed.

    Coupler = 2" L x 1.060" D

  • Basic 1923 T Frame Kit w/ Deluxe Body & Bed, Flat Floor
    Basic 1923 T Frame Kit w/ Deluxe Body & Bed, Flat Floor
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    Body Dimensions

    • Total Length:  52"
    • Firewall Width:  26.5"
    • Body Width:  45"
    • Body Height:  24"

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

  • Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Channeled Floor
    Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Channeled Floor
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

  • Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Unchanneled Floor
    Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Unchanneled Floor
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

  • Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, No Floor
    Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, No Floor
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

  • Deluxe 1923 T-Bucket Frame Kit w/ Standard Body and Bed, No Floor
    Deluxe 1923 T-Bucket Frame Kit w/ Standard Body and Bed, No Floor
    x
                The all new Deluxe T frame is engineered to deliver the ultimate ride and  handling of any T-bucket chassis! An exclusive triangulated four-bar rear  suspension with coilover shocks and urethane bushings provides unparalleled  adjustability and traction control, plus better ride quality than any other  T-bucket chassis on the market. It's paired with urethane-bushed four-bars  supporting the spring-behind-axle front suspension. The Deluxe '23 T sets a new  standard for the next generation of T-buckets! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Deluxe 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Channeled Floor
    Deluxe 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Channeled Floor
    x
                The all new Deluxe T frame is engineered to deliver the ultimate ride and  handling of any T-bucket chassis! An exclusive triangulated four-bar rear  suspension with coilover shocks and urethane bushings provides unparalleled  adjustability and traction control, plus better ride quality than any other  T-bucket chassis on the market. It's paired with urethane-bushed four-bars  supporting the spring-behind-axle front suspension. The Deluxe '23 T sets a new  standard for the next generation of T-buckets! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Deluxe 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Flat Floor
    Deluxe 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Flat Floor
    x
                The all new Deluxe T frame is engineered to deliver the ultimate ride and  handling of any T-bucket chassis! An exclusive triangulated four-bar rear  suspension with coilover shocks and urethane bushings provides unparalleled  adjustability and traction control, plus better ride quality than any other  T-bucket chassis on the market. It's paired with urethane-bushed four-bars  supporting the spring-behind-axle front suspension. The Deluxe '23 T sets a new  standard for the next generation of T-buckets! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Deluxe '27 T-Bucket Frame Kit w/ Standard Body, Unchanneled Floor
    Deluxe '27 T-Bucket Frame Kit w/ Standard Body, Unchanneled Floor
    x
                Looking for a little more interior room and a lower profile in your T  roadster? Then try our Deluxe '27 T! The all-new Deluxe '27 frame features the  same triangulated four-bar rear suspension as the Deluxe T, but with a longer  wheelbase and extended rear frame section to accommodate Speedway's high-quality  fiberglass '27 T roadster body. The body-and-frame combo can be used to build a  hot rod with the same open engine bay and fenderless look of a T-bucket, but  offers a lower seating position and a lot more legroom. Try it on for size!  

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Deluxe 1923 T-Bucket Frame Kit w/ Deluxe Body and Bed, Unchanneled Floor
    Deluxe 1923 T-Bucket Frame Kit w/ Deluxe Body and Bed, Unchanneled Floor
    x
                The all new Deluxe T frame is engineered to deliver the ultimate ride  and handling of any T-bucket chassis! An exclusive triangulated four-bar  rear suspension with coilover shocks and urethane bushings provides  unparalleled adjustability and traction control, plus better ride  quality than any other T-bucket chassis on the market. It's paired with  urethane-bushed four-bars supporting the spring-behind-axle front  suspension. The Deluxe '23 T sets a new standard for the next generation  of T-buckets! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

    If ordering the body kit without a floor (715-3200), please note that the door will not be hung. If you order a body kit with a floor (715-3211 or 715-3221), the door will be fitted & hung on its hinges before shipping.

  • Deluxe 1923 T Frame Kit w/ Deluxe Body and Bed, Channeled Floor
    Deluxe 1923 T Frame Kit w/ Deluxe Body and Bed, Channeled Floor
    x
                The all new Deluxe T frame is engineered to deliver the ultimate ride  and handling of any T-bucket chassis! An exclusive triangulated four-bar  rear suspension with coilover shocks and urethane bushings provides  unparalleled adjustability and traction control, plus better ride  quality than any other T-bucket chassis on the market. It's paired with  urethane-bushed four-bars supporting the spring-behind-axle front  suspension. The Deluxe '23 T sets a new standard for the next generation  of T-buckets! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

    If ordering the body kit without a floor (715-3200), please note that the door will not be hung. If you order a body kit with a floor (715-3211 or 715-3221), the door will be fitted & hung on its hinges before shipping.

  • Deluxe 1927 T-Bucket Frame Kit w/ Standard Body, No Floor
    Deluxe 1927 T-Bucket Frame Kit w/ Standard Body, No Floor
    x
                Looking for a little more interior room and a lower profile in your T  roadster? Then try our Deluxe '27 T! The all-new Deluxe '27 frame features the  same triangulated four-bar rear suspension as the Deluxe T, but with a longer  wheelbase and extended rear frame section to accommodate Speedway's high-quality  fiberglass '27 T roadster body. The body-and-frame combo can be used to build a  hot rod with the same open engine bay and fenderless look of a T-bucket, but  offers a lower seating position and a lot more legroom. Try it on for size!  

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Deluxe 1923 T-Bucket Frame Kit w/ Deluxe Body and Bed, No Floor
    Deluxe 1923 T-Bucket Frame Kit w/ Deluxe Body and Bed, No Floor
    x
                The all new Deluxe T frame is engineered to deliver the ultimate ride and handling of any T-bucket chassis! An exclusive triangulated four-bar rear suspension with coilover shocks and urethane bushings provides unparalleled adjustability and traction control, plus better ride quality than any other T-bucket chassis on the market. It's paired with urethane-bushed four-bars supporting the spring-behind-axle front suspension. The Deluxe '23 T sets a new standard for the next generation of T-buckets! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

    If ordering the body kit without a floor, please note that the door will not be hung. If you order a body kit with a floor (715-3211 or 715-3221), the door will be fitted & hung on its hinges before shipping.

  • Deluxe 1927 T-Bucket Frame Kit
    From: $2,999.99
    Deluxe 1927 T-Bucket Frame Kit
    x
                

    Looking for a little more interior room and a lower profile in your T roadster? Then try our Deluxe '27 T! The all-new Deluxe '27 frame features the same triangulated four-bar rear suspension as the Deluxe T, but with a longer wheelbase and extended rear frame section to accommodate Speedway's high-quality fiberglass '27 T roadster body. The body-and-frame combo can be used to build a hot rod with the same open engine bay and fenderless look of a T-bucket, but offers a lower seating position and a lot more legroom. Try it on for size!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Deluxe '27 T-Bucket Frame Kit w/ Deluxe Body, Unchanneled Floor
    Deluxe '27 T-Bucket Frame Kit w/ Deluxe Body, Unchanneled Floor
    x
                Looking for a little more interior room and a lower profile in your T roadster? Then try our Deluxe '27 T! The all-new Deluxe '27 frame features the same triangulated four-bar rear suspension as the Deluxe T, but with a longer wheelbase and extended rear frame section to accommodate Speedway's high-quality fiberglass '27 T roadster body. The body-and-frame combo can be used to build a hot rod with the same open engine bay and fenderless look of a T-bucket, but offers a lower seating position and a lot more legroom. Try it on for size! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    Doors are shipped hinged and latched, but they do require fitting and hanging onto the body by the owner.

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Deluxe 1927 T-Bucket Frame Kit w/ Deluxe Body, No Floor
    Deluxe 1927 T-Bucket Frame Kit w/ Deluxe Body, No Floor
    x
                Looking for a little more interior room and a lower profile in your T roadster? Then try our Deluxe '27 T! The all-new Deluxe '27 frame features the same triangulated four-bar rear suspension as the Deluxe T, but with a longer wheelbase and extended rear frame section to accommodate Speedway's high-quality fiberglass '27 T roadster body. The body-and-frame combo can be used to build a hot rod with the same open engine bay and fenderless look of a T-bucket, but offers a lower seating position and a lot more legroom. Try it on for size! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    Doors are shipped hinged and latched, but they do require fitting and hanging onto the body by the owner.

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build tim

Goto Previous PagePrevious Page
1 2