Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"rod ends series" Page 1 of 12

  • 1963-64 Chevy Car Manual Style Pitman Arm
    1963-64 Chevy Car Manual Style Pitman Arm
    x
                

    We stock these hard to find, quality replacement pitman arms.  They're built to factory specs, so you can be assured that you're getting a quality product that will help to keep your vehicle's steering as smooth as it was when it rolled off of the assembly line.

    Manual Style Pitman Arm

    • 1963-64 Chevy

    Note: This pitman arm is specific to the 63-64 Chevy cars and has one end with attached tie rod end and the other end has four master splines and taper from 1.070 to 1.106 and will NOT work on our 800 series box and others with a larger output shaft.

  • AFCO 20179 T1 & R Series Shock Rod End, 1 Inch Longer Non-Adjustable
    AFCO 20179 T1 & R Series Shock Rod End, 1 Inch Longer Non-Adjustable
    x
                

    Shock rod ends for T1-Series & R-Series shocks (purchased before November 2006). Add to AFCO aluminum shocks for extended length. 

    NOTE: These rod ends work with the new design hardware and are standard on shocks built after 3/1/2003.

  • AFCO 1004 T1 Series/R Series Shock Rod End 1/2 ID X 5/8 Inch w/Bearing
    AFCO 1004 T1 Series/R Series Shock Rod End 1/2 ID X 5/8 Inch w/Bearing
    x
                

    Shock rod ends for T1-Series & R-Series shocks (purchased before November 2006). Add to AFCO aluminum shocks for extended length. 

    NOTE: These rod ends work with the new design hardware and are standard on shocks built after 3/1/2003.

  • AFCO T1 Series, R Series Shock Rod End, 2 Inch Longer (Non-Adjustable)
    AFCO T1 Series, R Series Shock Rod End, 2 Inch Longer (Non-Adjustable)
    x
                

    Shock rod ends for T1-Series & R-Series shocks (purchased before November 2006). Add to AFCO aluminum shocks for extended length. 

    NOTE: These rod ends work with the new design hardware and are standard on shocks built after 3/1/2003.

  • QA1 Adventure Series Rock End w/ Bearing 1 Inch-14 Thread
    QA1 Adventure Series Rock End w/ Bearing 1 Inch-14 Thread
    x
                QA1 Adventure Series Rock Ends for the hardest of the hard-core builders, fabricators and off road racers.
    • Functions at an unprecedented 44° of misalignment
    • Forged and heat-treated Chromoly male housing
    • Precision-ground, heat-treated, chrome-plated ball
    • Exclusive self-lubricating, self-sealing, high-strength Teflon/Kevlar insert
    • Fully rebuildable
  • QA1 Adventure Series Rod Ends w/ Bearing, 1-1/4 Inch-12 Male
    QA1 Adventure Series Rod Ends w/ Bearing, 1-1/4 Inch-12 Male
    x
                QA1 Adventure Series Rock Ends for the hardest of the hard-core builders, fabricators and off road racers.
    • Functions at an unprecedented 44° of misalignment
    • Forged and heat-treated Chromoly male housing
    • Precision-ground, heat-treated, chrome-plated ball
    • Exclusive self-lubricating, self-sealing, high-strength Teflon/Kevlar insert
    • Fully rebuildable
  • Aluminum X-Series Heim Joint Rod Ends, 5/8-18 LH Male, 1/2 Inch Hole
    Aluminum X-Series Heim Joint Rod Ends, 5/8-18 LH Male, 1/2 Inch Hole
    x
                

    Aluminum rod ends have close tolerance, 3-piece, medium duty design. Hard anodized 7075-T6 aerospace quality aluminum body. Heat treated, 5210 precision ground ball with a Kevlar race. Self lubricating Teflon liner seals out dirt an debris

    Applications: Designed for motorsports application where weight is critical. All of the strength & features of the Precision rod ends at half of the weight.

    Assembly Tip:
      To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Aluminum Rod End Chart (GIF)

  • Aluminum X-Series Heim Joint Rod Ends, 5/8-18 RH Male, 1/2 Inch Hole
    Aluminum X-Series Heim Joint Rod Ends, 5/8-18 RH Male, 1/2 Inch Hole
    x
                

    Aluminum rod ends are a close tolerance, 3-piece, medium duty design. Hard anodized 7075-T6 aerospace quality aluminum body. Heat treated, 5210 precision ground ball, Kevlar race. Self lubricating Teflon liner seals out dirt and debris.

    Applications: Designed for motorsports application where weight is critical. All of the strength & features of the Precision rod ends at half of the weight.

    Assembly Tip:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Aluminum Rod End Chart (GIF)

  • FK CMXT Black Series Male Heim Joint Rod Ends, 3/4 Inch Thread
    New
    FK CMXT Black Series Male Heim Joint Rod Ends, 3/4 Inch Thread
    x
                
    FK Rod Ends offers this two piece male heim. The ball is made of 52100 steel that is heat treated and hard chrome plated. The body is made of alloy steel and is black oxide coated. The race is heat treated steel alloy that has been zinc plated and chromate treated.
    • Ball is 52100 steel, heat treated and hard chrome plated
    • Body is alloy steel, heat treated, black oxide coated
    • Race is alloy steel, heat treated, zinc plated, chromate treated
    • P.T.F.E. liner available
    • 3/4" thread
    • Choose Left Hand or Right Hand threads

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • FK CMXT Black Series Male Heim Joint Rod Ends, 1/2 x 5/8 Inch Thread
    New
    FK CMXT Black Series Male Heim Joint Rod Ends, 1/2 x 5/8 Inch Thread
    x
                
    FK Rod Ends offers this two piece male heim. The ball is made of 52100 steel that is heat treated and hard chrome plated. The body is made of alloy steel and is black oxide coated. The race is heat treated steel alloy that has been zinc plated and chromate treated.
    • Ball is 52100 steel, heat treated and hard chrome plated
    • Body is alloy steel, heat treated, black oxide coated
    • Race is alloy steel, heat treated, zinc plated, chromate treated
    • P.T.F.E. liner available
    • 1/2" hole x 5/8" shaft
    • Choose Left Hand or Right Hand threads

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • FK CMXT Black Series Male Heim Joint Rod Ends, 1/2 Inch Thread
    New
    FK CMXT Black Series Male Heim Joint Rod Ends, 1/2 Inch Thread
    x
                
    FK Rod Ends offers this two piece male heim. The ball is made of 52100 steel that is heat treated and hard chrome plated. The body is made of alloy steel and is black oxide coated. The race is heat treated steel alloy that has been zinc plated and chromate treated.
    • Ball is 52100 steel, heat treated and hard chrome plated
    • Body is alloy steel, heat treated, black oxide coated
    • Race is alloy steel, heat treated, zinc plated, chromate treated
    • P.T.F.E. liner available
    • 1/2" thread
    • Choose Left Hand or Right Hand threads

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • FK CMXT Black Series Male Heim Joint Rod Ends, 1/2 x 3/4 Inch Thread
    New
    FK CMXT Black Series Male Heim Joint Rod Ends, 1/2 x 3/4 Inch Thread
    x
                
    FK Rod Ends offers this two piece male heim. The ball is made of 52100 steel that is heat treated and hard chrome plated. The body is made of alloy steel and is black oxide coated. The race is heat treated steel alloy that has been zinc plated and chromate treated.
    • Ball is 52100 steel, heat treated and hard chrome plated
    • Body is alloy steel, heat treated, black oxide coated
    • Race is alloy steel, heat treated, zinc plated, chromate treated
    • P.T.F.E. liner available
    • 1/2" hole x 3/4"shaft
    • Choose Left Hand or Right Hand threads

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • FK CMXT Black Series Male Heim Joint Rod Ends, 5/8 x 3/4 Inch Thread
    New
    FK CMXT Black Series Male Heim Joint Rod Ends, 5/8 x 3/4 Inch Thread
    x
                
    FK Rod Ends offers this two piece male heim. The ball is made of 52100 steel that is heat treated and hard chrome plated. The body is made of alloy steel and is black oxide coated. The race is heat treated steel alloy that has been zinc plated and chromate treated.
    • Ball is 52100 steel, heat treated and hard chrome plated
    • Body is alloy steel, heat treated, black oxide coated
    • Race is alloy steel, heat treated, zinc plated, chromate treated
    • P.T.F.E. liner available
    • 5/8" hole x 3/4"shaft
    • Choose Left Hand or Right Hand threads

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • FK CMXT Black Series Male Heim Joint Rod Ends, 5/8 Inch Thread
    New
    FK CMXT Black Series Male Heim Joint Rod Ends, 5/8 Inch Thread
    x
                
    FK Rod Ends offers this two piece male heim. The ball is made of 52100 steel that is heat treated and hard chrome plated. The body is made of alloy steel and is black oxide coated. The race is heat treated steel alloy that has been zinc plated and chromate treated.
    • Ball is 52100 steel, heat treated and hard chrome plated
    • Body is alloy steel, heat treated, black oxide coated
    • Race is alloy steel, heat treated, zinc plated, chromate treated
    • P.T.F.E. liner available
    • 5/8" thread
    • Choose Left Hand or Right Hand threads

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Chromoly X-Series Heim Joint Rod Ends, 1-1/4 Inch-12 RH Male 1 In Hole
    Chromoly X-Series Heim Joint Rod Ends, 1-1/4 Inch-12 RH Male 1 In Hole
    x
                

    These X-Series rod ends feature heat-treated, precision-ground, chrome-plated balls riding in self-lubricating, self-sealing Teflon/Kevlar compound. These are enclosed in chromoly housings that are heat treated and protective coated for corrosion resistance, and have increased cross-sectional thickness for greater tensile strength.

  • Chromoly X-Series Heim Joint Rod Ends, 1-1/4 Inch-12 LH Male 1 In Hole
    Chromoly X-Series Heim Joint Rod Ends, 1-1/4 Inch-12 LH Male 1 In Hole
    x
                

    These X-Series rod ends feature heat-treated, precision-ground, chrome-plated balls riding in self-lubricating, self-sealing Teflon/Kevlar compound. These are enclosed in chromoly housings that are heat treated and protective coated for corrosion resistance, and have increased cross-sectional thickness for greater tensile strength.

  • Chromoly X-Series Heim Joint Rod Ends, 1 Inch-14 LH Male Threads
    Chromoly X-Series Heim Joint Rod Ends, 1 Inch-14 LH Male Threads
    x
                

    These X-Series rod ends feature heat-treated, precision-ground, chrome-plated balls riding in self-lubricating, self-sealing Teflon/Kevlar compound. These are enclosed in chromoly housings that are heat treated and protective coated for corrosion resistance, and have increased cross-sectional thickness for greater tensile strength.

  • Chromoly X-Series Heim Joint Rod Ends, 1 Inch-14 RH Male Threads
    Chromoly X-Series Heim Joint Rod Ends, 1 Inch-14 RH Male Threads
    x
                

    These X-Series rod ends feature heat-treated, precision-ground, chrome-plated balls riding in self-lubricating, self-sealing Teflon/Kevlar compound. These are enclosed in chromoly housings that are heat treated and protective coated for corrosion resistance, and have increased cross-sectional thickness for greater tensile strength.

  • AFCO 1007 Non-Adjustable Rod End - Threaded Aluminum 16 Series
    AFCO 1007 Non-Adjustable Rod End - Threaded Aluminum 16 Series
    x
                AFCO Non-Adjustable Rod Ends for 16 Series Shocks
            
  • AFCO 1007S Non-Adjustable Rod End - Smooth Aluminum 16 Series
    AFCO 1007S Non-Adjustable Rod End - Smooth Aluminum 16 Series
    x
                AFCO Non-Adjustable Rod Ends for 16 Series Shocks
            
  • Aluminum X-Series Heim Joint Rod Ends, 3/4-16 RH Male, 5/8 Inch Hole
    Aluminum X-Series Heim Joint Rod Ends, 3/4-16 RH Male, 5/8 Inch Hole
    x
                

    Aluminum rod ends are a close tolerance, 3-piece, medium duty design. Hard anodized 7075-T6 aerospace quality aluminum body. Heat treated, 5210 precision ground ball, Kevlar race. Self lubricating Teflon liner seals out dirt and debris.

    Applications: Designed for motorsports application where weight is critical. All of the strength & features of the Precision rod ends at half of the weight.

    Assembly Tip:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Aluminum Rod End Chart (GIF)

  • Aluminum X-Series Heim Joint Rod Ends, 3/4-16 LH Male, 5/8 Inch Hole
    Aluminum X-Series Heim Joint Rod Ends, 3/4-16 LH Male, 5/8 Inch Hole
    x
                

    Aluminum rod ends have close tolerance, 3-piece, medium duty design. Hard anodized 7075-T6 aerospace quality aluminum body. Heat treated, 5210 precision ground ball with a Kevlar race. Self lubricating Teflon liner seals out dirt an debris

    Applications: Designed for motorsports application where weight is critical. All of the strength & features of the Precision rod ends at half of the weight.

    Assebly Tip:
      To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Aluminum Rod End Chart (GIF)

  • FK Rod Ends SJM10T Stainless Steel 5/8 Inch RH Male Heim Joint
    FK Rod Ends SJM10T Stainless Steel 5/8 Inch RH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 5/8" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJML8T Stainless Steel 1/2 Inch LH Male Heim Joint
    FK Rod Ends SJML8T Stainless Steel 1/2 Inch LH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 1/2" LH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJM4T Stainless Steel 1/4 Inch RH Male Heim Joint
    FK Rod Ends SJM4T Stainless Steel 1/4 Inch RH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 1/4" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJM7T Stainless Steel 7/16 Inch RH Male Heim Joint
    FK Rod Ends SJM7T Stainless Steel 7/16 Inch RH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 7/16" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJML4T Stainless Steel 1/4 Inch LH Male Heim Joint
    FK Rod Ends SJML4T Stainless Steel 1/4 Inch LH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 1/4" LH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJML5T Stainless Steel 5/16 Inch LH Male Heim Joint
    FK Rod Ends SJML5T Stainless Steel 5/16 Inch LH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 5/16" LH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJM8T Stainless Steel 1/2 Inch RH Male Heim Joint
    FK Rod Ends SJM8T Stainless Steel 1/2 Inch RH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 1/2" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJML12T Stainless Steel 3/4 Inch LH Male Heim Joint
    FK Rod Ends SJML12T Stainless Steel 3/4 Inch LH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 3/4" LH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJML7T Stainless Steel 7/16 Inch LH Male Heim Joint
    FK Rod Ends SJML7T Stainless Steel 7/16 Inch LH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 7/16" LH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJML6T Stainless Steel 3/8 Inch LH Male Heim Joint
    FK Rod Ends SJML6T Stainless Steel 3/8 Inch LH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 3/8" LH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJM6T Stainless Steel 3/8 Inch RH Male Heim Joint
    FK Rod Ends SJM6T Stainless Steel 3/8 Inch RH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 3/8" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJML10T Stainless Steel 5/8 Inch LH Male Heim Joint
    FK Rod Ends SJML10T Stainless Steel 5/8 Inch LH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 5/8" LH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • FK Rod Ends SJM5T Stainless Steel 5/16 Inch RH Male Heim Joint
    FK Rod Ends SJM5T Stainless Steel 5/16 Inch RH Male Heim Joint
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 5/16" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • Precision X-Series Heim Joint Rod Ends, 3/4-16 LH Male, 5/8 Inch Hole
    Precision X-Series Heim Joint Rod Ends, 3/4-16 LH Male, 5/8 Inch Hole
    x
                These rod ends are used when you need to combine different sized rod shank and through hole. These ends offer greater strength than our "standard" rod ends. 

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Precision X-Series Heim Joint Rod Ends, 5/8-18 LH Male, 1/2 Inch Hole
    Precision X-Series Heim Joint Rod Ends, 5/8-18 LH Male, 1/2 Inch Hole
    x
                These rod ends are used when you need to combine different sized rod shank and through hole. These ends offer greater strength than our "standard" rod ends. 

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Precision X-Series Heim Joint Rod Ends, 5/8-18 RH Male, 1/2 Inch Hole
    Precision X-Series Heim Joint Rod Ends, 5/8-18 RH Male, 1/2 Inch Hole
    x
                These rod ends are used when you need to combine different sized rod shank and through hole. These ends offer greater strength than our "standard" rod ends. 

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Precision X-Series Heim Joint Rod Ends, 3/4-16 RH Male, 5/8 Inch Hole
    Precision X-Series Heim Joint Rod Ends, 3/4-16 RH Male, 5/8 Inch Hole
    x
                These rod ends are used when you need to combine different sized rod shank and through hole. These ends offer greater strength than our "standard" rod ends. 

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Seals-It WS6250 Heim Joint Rod End Seals, 5/8 Inch Hole, Set/6
    Seals-It WS6250 Heim Joint Rod End Seals, 5/8 Inch Hole, Set/6
    x
                

    These rod end seals are a neoprene rubber seal bonded to an aircraft quality washer. Extends the life of your rod ends by keeping the dirt, debris and moisture out of the spherical ball. They fit on both sides of the ball end of the heim joint and are sized to match the hole in the spherical ball.  

    For use with standard and Pro 1 Series rod end only. Sold in sets of six, which will cover both sides of three rod ends.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 12