Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"rod ends inch" Page 1 of 25

  • Steel Jam Nuts, 5/8 Inch-18 NF Fine Thread, Pack/6
    Steel Jam Nuts, 5/8 Inch-18 NF Fine Thread, Pack/6
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium steel (zinc-coated for corrosion prevention), and they're available with either right hand or left hand threads.

    These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 5/8 Inch-18 NF Fine Thread
    • Sold in bags of six nuts.
    • Choose left or right thread.
  • Steel Jam Nuts, 3/4 Inch-16 NF Fine Thread, Pack/6
    Steel Jam Nuts, 3/4 Inch-16 NF Fine Thread, Pack/6
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium steel (zinc-coated for corrosion prevention), and they're available with either right hand or left hand threads.

    These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 3/4 Inch-16 NF Fine Thread
    • Sold in bags of six nuts.
    • Choose left or right thread.
  • Plain Steel Sleeves for 5/8 Inch Rod Ends
    Plain Steel Sleeves for 5/8 Inch Rod Ends
    x
                

    If you are building a hot rod just a little bit different than the next guy, you will probably need a special length tie rod or drag link sleeve. We stock many common and uncommon lengths along with custom, made-to-order lengths. Measurements are in assembled eye-to-eye lengths.

    To order:

    1. Use guide below to measure your finished length.
    2. The part number and length you order will be 3" longer than the sleeve you receive. (I.E., if you order a 48" part number, you will receive a 45" long sleeve.) This is the difference in length required to give you the correct finished center-to-center measurement.
    3. All sleeves will have internal RH thread in one end and LH thread in the other.

    Measuring Guide for Tie Rod/Drag Link (GIF)

  • Swedged 6061 Aluminum Radius Rod for 5/8 Inch Heim
    Swedged 6061 Aluminum Radius Rod for 5/8 Inch Heim
    x
                Swedged 6061 aluminum steering, panhard and radius rods. 1" O.D., 5/8" NF threads. LH threads on one end. RH threads on the other end.

     

  • Speedway Tribute T-Bucket 9 Inch Ford Rear End Option
    Speedway Tribute T-Bucket 9 Inch Ford Rear End Option
    x
                Please view the product's page for more information
            
  • Plain Steel Smoothie Clevis, 5/8 Inch RH Thread, 3/8 Inch Slot & Hole
    Plain Steel Smoothie Clevis, 5/8 Inch RH Thread, 3/8 Inch Slot & Hole
    x
                

    A beautiful steel clevis ideal for your hot rods' suspension! The shank features 5/8" RH fine threads. Has a 3/8" wide slot and 3/8" diameter hole.

    • Beautiful, rugged clevis ideal for hot rod suspension
    • Rounded head of 3/8" cross bolt (included) blends smoothly into overall shape
    • Shank features 5/8" RH fine threads
    • 3/8" slot
    • Measures 4 inches from end to end
    • Plain steel
  • Speedway Corvair Pitman Arm
    From: $49.99
    Product Rating: 4.50 Stars
    Speedway Corvair Pitman Arm
    x
                

    This is our forged 'new design' Corvair pitman arm. It measures approximately 7" end to end, approximately 5-3/8" from the center of the big hole to the center of the small hole. The arm has a side-to-side offset approximately 1-7/8". The small hole fits an early Ford tie rod end (such as our 910-02909) and it is half tapered from both sides so that the drag link can be mounted from either side.


     

     

  • Stainless Jam Nut, 5/8 Inch-18 RH NF Fine Thread
    Stainless Jam Nut, 5/8 Inch-18 RH NF Fine Thread
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium stainless steel and they're available with right hand threads.

    These stainless steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 5/8 Inch-18 RH NF Fine Thread
    • Available in right hand thread.
  • Chrome Steel Jam Nut, 5/8 Inch-18 RH NF Fine Thread
    Chrome Steel Jam Nut, 5/8 Inch-18 RH NF Fine Thread
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium chrome steel and they're available with right hand threads.

    These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 5/8 Inch-18 RH NF Fine Thread
    • Available in right hand thread.

    Note: Always run a tap or die over and through any chromed threaded item. Apply anti-seize liberally to both threaded surfaces before assembly to prevent galling of threads. Learn why running a tap or die over new threads is so important prior to assembly in our tech article, Installing New Hardware.

  • Four-Bar Rod End Plastic Bushing Kit for 1/2 Inch Bolt, Set of 8
    Four-Bar Rod End Plastic Bushing Kit for 1/2 Inch Bolt, Set of 8
    x
                

    These nylon bushings for 4 bar ends can be used for your custom build or as replacements for our kits. Fits rod ends with a 1.137" I.D. and rod end width of 1.050". Kit includes a set of 8 plastic bushings.

    • Bushing Eye O.D.:  1.508" @ widest point of the crown - it is not flat
    • Total Width of Bushing Assembly:  1.375" 
    • Steel Sleeve I.D.:  .500"
    • Steel Sleeve O.D.:  .750"
    • Steel Sleeve Length:  1.375"
    • Plastic
    • Set of 8
    • For four-bar ends

     

  • Steel Heim Rod End Reducer, 5/8 Inch Bore to 1/2 Bolt
    Steel Heim Rod End Reducer, 5/8 Inch Bore to 1/2 Bolt
    x
                
    • Used to reduce rod end bore
    • Reducers fit entirely in the rod end ball
  • AFCO 10277 Rod End Spacer, 3/4 Inch
    AFCO 10277 Rod End Spacer, 3/4 Inch
    x
                

    Inner rod end spacers for round lower arm. 6061-T6 aluminum construction.

    Note:  Spacers are sold as each.  To space one rod end will require 2 spacers.

  • Steel Jam Nuts, 11/16 Inch-18 NF Fine Thread, Pack/6
    Steel Jam Nuts, 11/16 Inch-18 NF Fine Thread, Pack/6
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium steel (zinc-coated for corrosion prevention), and they're available with either right hand or left hand threads.

    These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 11/16 Inch-18 NF Fine Thread
    • Sold in bags of six nuts.
    • Choose left or right thread.
  • AFCO 20023K Rod End and Spacer Kit, 3/4 Inch
    AFCO 20023K Rod End and Spacer Kit, 3/4 Inch
    x
                

    Required for rod end style lower control arms. Kit includes (1) rod end, (1) jam nut and (2) spacer bushings.

  • Stallard Chassis Micro Sprint Alum Turnbuckle, 7/16 Inch Heims
    Stallard Chassis Micro Sprint Alum Turnbuckle, 7/16 Inch Heims
    x
                These turnbuckles from Stallard are designed for use on Micro Sprint racing applications.  They come in a natural aluminum finish and feature 7/16" rod end heims for easy adjustment. Choose your desired length.
    • Available in 3.25", 3.75", 4.24", 4.75", 5.25" and 6" lengths
    • 7/16" rod end heims
  • Precision Carbon Steel RH Male Heim Joint Rod Ends, 1/2 Inch
    Precision Carbon Steel RH Male Heim Joint Rod Ends, 1/2 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size.  

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Heim Sizes Chart (GIF)

  • Rod End Bushing Kit for 5/8 Inch Bolt
    Rod End Bushing Kit for 5/8 Inch Bolt
    x
                

    These nylon bushings for 4-bar ends are perfect for your custom build. Bushing fits rod ends with a 1.125" I.D. and rod end width of 1.485". The steel sleeve I.D. is 0.625", O.D. is 0.815" and the length of the sleeve is 1.76". Kit includes a set of 8 bushings with 8 sleeves.

    Note: These bushings are not a replacement for Speedway 4-bar rod ends as they are wider. If you are trying to use this bushing kit with a Speedway 4-bar rod end, please note that it will not be a direct fit. You will need to trim 0.435" off the overall width to match the 1.050" width of the bushing that came with the Speedway rod end.

  • 1937-48 Ford Steering Arms, 1-3/4 Inch Drop
    1937-48 Ford Steering Arms, 1-3/4 Inch Drop
    x
                

    These 1-3/4" drop forged steel steering arms are popular on Model T - 1934 Fords with 4" dropped axles and four-bar or hairpin radius rod suspensions. Will attach to '37-'48 Ford spindles and accept 11/16" Ford "tapered" tie rod ends (both the top and bottom are tapered to allow tie rods to mount above or below arm as needed). You can drill-through with a 5/8" bit to use spherical rod ends.

    Use a 46" eye-to-eye tie rod link when used with a 48" wide axle with Ford spindles.

     Steering Arm Ends Guide (GIF)

     Cross Steering Guide (GIF)

  • Steel Jam Nuts, 1/2 Inch-20 NF Fine Thread, Pack/6
    Steel Jam Nuts, 1/2 Inch-20 NF Fine Thread, Pack/6
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium steel (zinc-coated for corrosion prevention), and they're available with either right hand or left hand threads.

    These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 1/2 Inch-20 NF Fine Thread
    • Sold in bags of six nuts.
    • Choose left or right thread.
  • Steel Jam Nuts, 3/8 Inch-24 NF Fine Thread, Pack/6
    Steel Jam Nuts, 3/8 Inch-24 NF Fine Thread, Pack/6
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium steel (zinc-coated for corrosion prevention), and they're available with either right hand or left hand threads.

    These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 3/8 Inch-24 NF Fine Thread
    • Sold in bags of six nuts.
    • Choose left or right thread.
  • Bert Transmission 80-D-LMZ 3/8 Inch Solid Rod End
    Bert Transmission 80-D-LMZ 3/8 Inch Solid Rod End
    x
                Bert Racing Transmission Replacement Parts
            
  • Chrome Steel Jam Nut, 11/16 Inch-18 RH NF Fine Thread
    Chrome Steel Jam Nut, 11/16 Inch-18 RH NF Fine Thread
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium chrome steel and they're available with right hand threads.

    These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 11/16 Inch-18 RH NF Fine Thread
    • Available in right hand thread.

    Note: Always run a tap or die over and through any chromed threaded item. Apply anti-seize liberally to both threaded surfaces before assembly to prevent galling of threads. Learn why running a tap or die over new threads is so important prior to assembly in our tech article, Installing New Hardware.

  • Speedway Mustang II Tubular Upper Control Arm, 5/8 Inch Narrower
    Speedway Mustang II Tubular Upper Control Arm, 5/8 Inch Narrower
    x
                Please view the product's page for more information
            
  • AFCO 20068-8D Rod End Reducer Bushing 3/4 Inch - 5/8 Inch
    AFCO 20068-8D Rod End Reducer Bushing 3/4 Inch - 5/8 Inch
    x
                

    Assorted AFCO Aluminum Spring Rod service/replacement parts.

    Spring Rod Exploded View (GIF)

  • Lightweight Chromoly Adjustable Panhard Bar, 5-1/2 Inch Bend
    Lightweight Chromoly Adjustable Panhard Bar, 5-1/2 Inch Bend
    x
                

    How would you like a panhard bar that is 25% lighter? This panhard bar is made of 4130 Chromoly tubing and has an adjuster on one end that allows approximately 2 inches of adjustment. Made with 3/4" heims and 5 1/2" bend.

    • 20" adjusts from 19" - 21"
    • 22" adjusts from 21" - 23"
    • 24" adjusts from 23" - 25"

     

  • Chrome Steel Jam Nut, 11/16 Inch-18 LH NF Fine Thread
    Chrome Steel Jam Nut, 11/16 Inch-18 LH NF Fine Thread
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium chrome steel and they're available with left hand threads.

    These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 11/16 Inch-18 LH NF Fine Thread
    • Available in left hand thread.

    Note: Always run a tap or die over and through any chromed threaded item. Apply anti-seize liberally to both threaded surfaces before assembly to prevent galling of threads. Learn why running a tap or die over new threads is so important prior to assembly in our tech article, Installing New Hardware.

  • Chrome Steel Jam Nut, 5/8 Inch-18 LH NF Fine Thread
    Chrome Steel Jam Nut, 5/8 Inch-18 LH NF Fine Thread
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium chrome steel and they're available with left hand threads.

    These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 5/8 Inch-18 LH NF Fine Thread
    • Available in left hand thread.

    Note: Always run a tap or die over and through any chromed threaded item. Apply anti-seize liberally to both threaded surfaces before assembly to prevent galling of threads. Learn why running a tap or die over new threads is so important prior to assembly in our tech article, Installing New Hardware.

  • Chrome Steel Jam Nut, 1/2 Inch-20 LH NF Fine Thread
    Chrome Steel Jam Nut, 1/2 Inch-20 LH NF Fine Thread
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium chrome steel and they're available with left hand threads.

    These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 1/2 Inch-20 LH NF Fine Thread
    • Available in left hand thread.

    Note: Always run a tap or die over and through any chromed threaded item. Apply anti-seize liberally to both threaded surfaces before assembly to prevent galling of threads. Learn why running a tap or die over new threads is so important prior to assembly in our tech article, Installing New Hardware.

  • Precision Carbon Steel RH Male Heim Joint Rod Ends, 3/8 Inch
    Precision Carbon Steel RH Male Heim Joint Rod Ends, 3/8 Inch
    x
                Precision steel rod ends provide greater strength than our "standard"  rod ends. They have close tolerance and have a 3 piece medium duty rod  end. Carbon steel body, 5210 precision ground ball and feature a Teflon  Kevlar race. Self lubrication teflon liner to seal out dirt and debris.  Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Precision Rod Ends Chart Application (GIF)

     

  • Steel Heim Rod End Spacer, 3/4 I.D., 1 Inch Long
    Steel Heim Rod End Spacer, 3/4 I.D., 1 Inch Long
    x
                
    • 3/4" I.D.
    • 1-1/4" O.D.
    • 1" Long
  • Stainless Jam Nut, 3/8 Inch-24 RH NF Fine Thread
    Stainless Jam Nut, 3/8 Inch-24 RH NF Fine Thread
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium stainless steel and they're available with right hand threads.

    These stainless steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 3/8 Inch-24 RH NF Fine Thread
    • Available in right hand thread.
    • Works with -3 AN bulkhead tee adapter brake fittings
  • Precision Carbon Steel RH Male Heim Joint Rod Ends, 5/8 Inch
    Precision Carbon Steel RH Male Heim Joint Rod Ends, 5/8 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size.  

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Heim Sizes Chart (GIF)

  • Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  

    • For 48" kingpin-to-kingpin axles
    • Traditional steering arm for left front wheel NOT included with Traditional steering kit
    • Available with 5x4.5" or 5x4.75" hubs

    Spindle Identification Guide (GIF)

  • AFCO 20179 T1 & R Series Shock Rod End, 1 Inch Longer Non-Adjustable
    AFCO 20179 T1 & R Series Shock Rod End, 1 Inch Longer Non-Adjustable
    x
                

    Shock rod ends for T1-Series & R-Series shocks (purchased before November 2006). Add to AFCO aluminum shocks for extended length. 

    NOTE: These rod ends work with the new design hardware and are standard on shocks built after 3/1/2003.

  • AFCO 1007X Shock End 1/2 I.D. x 1.06 Inch Wide Drag Bearing-Comp Lined
    AFCO 1007X Shock End 1/2 I.D. x 1.06 Inch Wide Drag Bearing-Comp Lined
    x
                

    Replacement Teflon lined spherical bearings for all AFCO shocks except K-Series.

    AFCO Racing's quality and design help these replacement shock bearings stand up to the toughest standards and conditions, from daily commuting to full-on racing. These shock bearings are replacements for your AFCO Racing shocks. They are available for street rod, race, and coil-over applications.

    AFCO Shock End Drag Bearing, Comp Lined

    • 1/2 I.D. x 1.06 Inch Wide
    • standard bearing
    • Bearing housing is 1.06" o.d. and 1" wide.
    • Sleeve is .683" o.d. and .390" wide
  • Black Swedged 6061 Aluminum Radius Rod for 5/8 Inch Heim
    Black Swedged 6061 Aluminum Radius Rod for 5/8 Inch Heim
    x
                Swedged 6061 aluminum steering, panhard and radius rods. 1" O.D., 5/8"  NF threads. LH threads on one end. RH threads on the other end.
            
  • Stainless Jam Nut, 11/16 Inch-18 RH NF Fine Thread
    Stainless Jam Nut, 11/16 Inch-18 RH NF Fine Thread
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium stainless steel and they're available with right hand threads.

    These stainless steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 11/16 Inch-18 RH NF Fine Thread
    • Available in right hand thread.
  • Hot Rod Nostalgia Steering Column, 30 Inch, Plain Stainless Steel
    Hot Rod Nostalgia Steering Column, 30 Inch, Plain Stainless Steel
    x
                Our original Hot Rod Steering Column has been a huge success, but many rodders said they wanted one with a turn signal.

    The Nostalgia Columns offer a similar vintage look but have modern GM-style turn signal, hazard light and horn functions built into the attractive bell-shaped upper housings.

    Perfect for a wide variety of 1920's through 1950's era rods, as well as Cobras and other kit cars.

    The columns measure 30" long and have 3/4"-36 spline lower shafts. They're available with paintable stainless steel housings.
    • 30" long
    • Beautiful Art-Deco styling
    • Paintable Stainless steel
    • Turn signal, hazard light and horn functions
  • AFCO 20029R-1 5/8 Inch Rod End Round Tube Lower Arm, 19 Inch, Press-In
    AFCO 20029R-1 5/8 Inch Rod End Round Tube Lower Arm, 19 Inch, Press-In
    x
                
    • .109" Wall DOM Tubing
    • Swaged for 5/8" rod end
    • Press-In Ball Joint
    • Uses standard 20051 strut bars
    • Std GRT/Rayburn/Shaw
  • Stainless Jam Nut, 11/16 Inch-18 LH NF Fine Thread
    Stainless Jam Nut, 11/16 Inch-18 LH NF Fine Thread
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium stainless steel and they're available with left hand threads.

    These stainless steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 11/16 Inch-18 LH NF Fine Thread
    • Available in left hand thread.
Goto Previous PagePrevious Page
1 2 3 4 5 ... 25