Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"rod ends female stud" Page 1 of 1

  • Speedway Steel 1/2 Inch RH Female Heim Joint Rod Ends with Stud
    Speedway Steel 1/2 Inch RH Female Heim Joint Rod Ends with Stud
    x
                These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of. They are Teflon lined and the RH thread stud has a hex built in for easy installation. 
            
  • Speedway Steel 3/16 Inch RH Female Heim Joint Rod Ends with Stud
    Speedway Steel 3/16 Inch RH Female Heim Joint Rod Ends with Stud
    x
                These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of. They are Teflon lined and the RH thread stud has a hex built in for easy installation. 
            
  • Speedway Steel 7/16 Inch RH Female Heim Joint Rod Ends with Stud
    Speedway Steel 7/16 Inch RH Female Heim Joint Rod Ends with Stud
    x
                These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of. They are Teflon lined and the RH thread stud has a hex built in for easy installation. 
            
  • Speedway Steel 1/4 Inch RH Female Heim Joint Rod Ends with Stud
    Speedway Steel 1/4 Inch RH Female Heim Joint Rod Ends with Stud
    x
                These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of. They are Teflon lined and the RH thread stud has a hex built in for easy installation. 
            
  • Speedway Steel 5/16 Inch RH Female Heim Joint Rod Ends with Stud
    Speedway Steel 5/16 Inch RH Female Heim Joint Rod Ends with Stud
    x
                These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of. They are Teflon lined and the RH thread stud has a hex built in for easy installation. 
            
  • Speedway Steel 3/8 Inch RH Female Heim Joint Rod Ends with Stud
    Speedway Steel 3/8 Inch RH Female Heim Joint Rod Ends with Stud
    x
                These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of. They are Teflon lined and the RH thread stud has a hex built in for easy installation. 
            
  • Speedway Steel 3/4-16 RH Female Heim Joint Rod Ends with Stud
    Speedway Steel 3/4-16 RH Female Heim Joint Rod Ends with Stud
    x
                
    • Teflon lined steel rod end with stud
    • NF thread
    • Ideal for shift linkage, tie rod assemblies, etc.
    • RH threaded stud has hex built in for easy installation
  • Speedway Steel 5/8 Inch RH Female Heim Joint Rod Ends with Stud
    Speedway Steel 5/8 Inch RH Female Heim Joint Rod Ends with Stud
    x
                These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of. They are Teflon lined and the RH thread stud has a hex built in for easy installation. 
            
  • Speedway Steel 5/16 Inch LH Female Heim Joint Rod Ends with Stud
    Speedway Steel 5/16 Inch LH Female Heim Joint Rod Ends with Stud
    x
                These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of. They are Teflon lined.
            
  • Speedway Steel 7/16 Inch LH Female Heim Joint Rod Ends with Stud
    Speedway Steel 7/16 Inch LH Female Heim Joint Rod Ends with Stud
    x
                These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of. They are Teflon lined.
            
  • Mustang II Outer Tie Rod End, Manual Version
    Mustang II Outer Tie Rod End, Manual Version
    x
                

    Outer tie rod and inner extension fits left or right, attaches steering rack to spindles. Fits both manual Mustang II and 1982-1988 T-Bird power racks.

    • .562 x 18 female thread
    • 3.40" long from stud centerline to end
  • Speedway Steel 5/8 Inch LH Female Heim Joint Rod Ends with Stud
    Speedway Steel 5/8 Inch LH Female Heim Joint Rod Ends with Stud
    x
                These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of. They are Teflon lined.
            
  • Mustang II Extended-Length Outer Tie Rod End
    Mustang II Extended-Length Outer Tie Rod End
    x
                

    Outer tie rod fits left or right, attaches steering rack to spindles. Fits both manual Mustang II and 1982-1988 T-Bird power racks. Measures 1.5" longer than stock outer tie rod end.

  • Quick Release Cable or Linkage End, 1/4-28 RH
    Quick Release Cable or Linkage End, 1/4-28 RH
    x
                These steel ends are perfect for throttle cable or linkage that needs to be quick release. They have the same thread on the stud as they do in the body. 
            
  • Stainless Steel Double Adjuster, 5/8-18 Threads, 4-1/4 Inch Length
    Stainless Steel Double Adjuster, 5/8-18 Threads, 4-1/4 Inch Length
    x
                These stainless steel double adjusters can be used with female rod ends to build tie rods or other components. 1-3/4" long on each side, with 5/8"-18 LH and RH threads. 3/4" width across the flats.
            
  • Quick Release Cable or Linkage End, 10-32 RH
    Quick Release Cable or Linkage End, 10-32 RH
    x
                These steel ends are perfect for throttle cable or linkage that needs to be quick release. They have the same thread on the stud as they do in the body. 
            
  • Chrome 12 Volt Horns
    $29.99
    $40.00
    Product Rating: 4.50 Stars
    Chrome 12 Volt Horns
    x
                

    Kit includes one low-tone and one high-tone horn with hardware. Chromed plastic construction. Horns have a centrally located 5/16” stud on the back side for mounting. A 4-prong relay is also included. 12 volt operation.

    Kit includes:

    • Two 5/16” x 1” bolts, nuts and washers
    • Two 90 degree brackets about 1-1/8” long on each side
    • Four flat brackets that are 3-1/4” with mounting holes 2-1/2” on center
    • Also includes a grounding pig tail with eyelet on one end and flat female spade connector on the other to match up to the horn

    911-22664 Instructions (PDF)

  • Aluminum Cable Quick Release, 10/32"
    Aluminum Cable Quick Release, 10/32"
    x
                

    Never fight an awkward clevis or heim again.

    This quick release cable end is made of light weight aluminum and features female 10-32 thread.  Also included are one steel ball stud with 1/4" male fine threads and a second aluminum ball stud with 10-32 thread.

     

  • Black 12 Volt Horn Kit
    $24.99
    $30.00
    Black 12 Volt Horn Kit
    x
                These horn kits include one low-tone and one high-tone horn  with hardware. Black plastic construction. Horns have a centrally  located 5/16” stud on the back side for mounting. A 4-prong relay is  also included. 12 volt operation.

    Kit includes:
    • Two 5/16” x 1” bolts, nuts and washers
    • Two 90 degree brackets about 1-1/8” long on each side
    • Four flat brackets that are 3-1/4” with mounting holes 2-1/2” on center
    • Also includes a grounding pig tail with eyelet on one end and flat female spade connector on the other to match up to the horn
  • Garage Sale - Steel Heim Joint Rod Ends w/ Stud, 3/4-16 LH Female
    Garage Sale
    Garage Sale - Steel Heim Joint Rod Ends w/ Stud, 3/4-16 LH Female
    x
                
    • Teflon lined steel rod end with stud
    • NF thread
    • Ideal for shift linkage, tie rod assemblies, etc.
    • RH threaded stud has hex built in for easy installation
     
    Clearance!
     
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 
  • Garage Sale - Mustang II Extended-Length Outer Tie Rod End
    Garage Sale
    Garage Sale - Mustang II Extended-Length Outer Tie Rod End
    x
                

    This is garage sale priced because it is missing the castle nut.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

     

    Outer tie rod fits left or right, attaches steering rack to spindles. Fits both manual Mustang II and 1982-1988 T-Bird power racks. Measures 1.5" longer than stock outer tie rod end.

    Item Details

    5-1/8" (5.149) from center of stud to the end 

  • Garage Sale - Chrome 12 Volt Horns
    $19.99
    $40.00
    Garage Sale
    Garage Sale - Chrome 12 Volt Horns
    x
                Please view the product's page for more information