Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"red mount tail lights" Page 1 of 2

  • 1937-1938 Chevy LED Tail Light Assembly
    1937-1938 Chevy LED Tail Light Assembly
    x
                

    Use these brilliant polished stainless steel LED tail lights to upgrade your 1937-1938 Stovebolt or hang 'em on the back of a T-bucket for a different look! Choose left or right.

    • 45 super bright red LED's
    • Polycarbonate lens
    • Polished stainless steel housing
    • For 12V systems
    • Left-side taillight has licence plate light

    This taillight works best with a 1937-38 mount bracket. If you desire a universal-mount light, 91137013 pickup housings have an almost flat back for ease of mounting.

    1937-1938 Chevy Tail Light Installation Instructions (PDF)

  • Hagan Flush Mount LED Tail Lights Red Oval 4.5 x 1.5
    Hagan Flush Mount LED Tail Lights Red Oval 4.5 x 1.5
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 4.5" x 1.5" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • 1950 Pontiac Red Tail Light Assembly
    1950 Pontiac Red Tail Light Assembly
    x
                

    The clean round shape and domed lens of the 1950 Pontiac tail light have been a staple on hot rods for more than five decades. This beautiful tail light assembly is a faithful reproduction of that classic design and features a glass lens just like the original. This taillight makes a perfect finishing touch on a wide variety of street rods and customs – or you could even use it on a 1950 Pontiac!

    • Classic shape and design
    • Easily adaptable to a variety of vehicles
    • Red glass lens
    • Chrome bezel
    • Rubber mount gasket included
    • Single 1157 dual-filament bulb
  • 1928-1931 Ford Model A Stainless Tail Lights
    1928-1931 Ford Model A Stainless Tail Lights
    x
                

    Polished stainless steel housing with glass lenses. An excellent replacement or addition to your Model 'A' Ford. Left tail light has lenses on the bottom to illuminate a license plate. Choose left or right. 12 volt operation.

    • 3.851" diameter
    • 3" depth
    • 3.851" height
    • 1-3/4" mount 

    Wire colors:

    • Housing - Ground
    • Tail - Black
    • Stop - Green

    These tail lights have two bulbs in them that are of a single filament style. 

  • 1940-1953 Chevy Truck LED Tail Lights
    1940-1953 Chevy Truck LED Tail Lights
    x
                

    These 12 volt LED tail lights fit most 1940-1953 Chevrolet trucks that use two staggered bolts on the rear for mounting. A total of 45 super bright red LED's mount in a stainless steel housing.

    • Polycarbonate Lens
    • The left drivers side taillight has a license plate 6 LED light.
    • The right passenger side taillight does not have a license plate light.


    Note: A LED flasher is only required when all the lights on the vehicle are LED.

    1940-1953 Chevy Truck Tail Light Installation Instructions (pdf)

  • Tall Model T Cowl-Tail Lights, Black
    Tall Model T Cowl-Tail Lights, Black
    x
                

    Features a 12 volt dual element bulb and can be used as a tail light or a cowl light. 9-1/2" tall with 3" diameter lens. Specify red or amber lens.

    Note: Mount bracket is NOT included. Lens must be secured in place with silicone (see Instructions).

    Cowl Light Installation Instructions (PDF)

  • 1950 Pontiac LED Tail Light Conversion Lens
    1950 Pontiac LED Tail Light Conversion Lens
    x
                

    This LED tail light conversion kit converts your 1950 Pontiac tail, stop, and turn signal lights into very bright and visible LED's. LED's feature a wide viewing angle of 100 degrees as well as cool operation and long life. This kit is designed to bolt into a 1949-52 Ponitac tail light housing with the provided stainless steel brackets. Your stock lenses are reused for a factory appearance when the lights are off. A true bolt-in for stock Pontiac taillight housings or reproduction units.

    Kit Contents:

    • (2) LED arrays
    • (4) solderless connectors
    • (2) LED to car electrical harness
    • Installation instructions

    The red wire is for stop light/turn signal. The black wire is for the tail light.

    1950 Pontiac LED Tail Light Conversion Instructions (PDF)

  • 1951-1952 Chevy LED Tail Light Assembly
    1951-1952 Chevy LED Tail Light Assembly
    x
                These completely assembled tail light bezels are for 1951-1952 Chevy passenger cars. They feature a red polycarbonate lens with 16 super bright red LED's. These tail light assemblies are a conversion replacement for your old damaged or missing tail lights. 
    • Red Polycarbonate Lens with 16 Super Bright Red LED's
    • Chrome Zinc Die Cast Bezel with red reflector
    • Epoxy Coated, Fully Sealed Electronics 
    • Fits All Passenger Cars
    • Left or Right side
    • Includes Chrome Housing, Mounting Hardware, Round Reflector, Socket and Wires
    • 12V only
  • 1938-1939 Ford Red Tail-Stop Lights
    1938-1939 Ford Red Tail-Stop Lights
    x
                

    Polished stainless steel rim taillights for 1938-1939 Ford. These taillights have a glass lens, single 1157 dual-filament bulb, and match the original tail lights closely.

    For 12 volt systems only.

     

  • Hagan Street Rods fm8OVR-LEDH Flush Mount Tail Lights Red Oval 8 x 1
    Hagan Street Rods fm8OVR-LEDH Flush Mount Tail Lights Red Oval 8 x 1
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 8" x 1" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fm10SSR-LEDH Flush Mount Tail Lights Red Slot 10x.5
    Hagan Street Rods fm10SSR-LEDH Flush Mount Tail Lights Red Slot 10x.5
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 10" x .5" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fm6SSR-LEDH Flush Mount Tail Lights Red Slot 6 x .5
    Hagan Street Rods fm6SSR-LEDH Flush Mount Tail Lights Red Slot 6 x .5
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 6" x 0.5" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fm8SSR-LEDH Flush Mount Tail Lights Red Slot 8 x .5
    Hagan Street Rods fm8SSR-LEDH Flush Mount Tail Lights Red Slot 8 x .5
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 8" x 0.5" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fm4SSR-LEDH Flush Mount Tail Lights Red Slot 4 x .5
    Hagan Street Rods fm4SSR-LEDH Flush Mount Tail Lights Red Slot 4 x .5
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 4" x 0.5" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fm6OVR-LEDH Flush Mount Tail Lights Red Oval 6 x 1
    Hagan Street Rods fm6OVR-LEDH Flush Mount Tail Lights Red Oval 6 x 1
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 6" x 1" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fmTD9R-LEDH Flush Mount Tail Lights Red Teardrop 9x1
    Hagan Street Rods fmTD9R-LEDH Flush Mount Tail Lights Red Teardrop 9x1
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 9" x 1" x 0.25" thick
    • Steel face plate is 18 gauge mild steel
    • Boxes are 1-5/8" deep x 2" wide x 12" long

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fmTD39R-LED 1939 Ford Style Flush Mount LED Tail Lights
    Hagan Street Rods fmTD39R-LED 1939 Ford Style Flush Mount LED Tail Lights
    x
                

    Hagan has made it simple to add a set of flush mount '39 Ford style LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 1/4" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • 1156 LED Tail Light Bulb, 1 Inch, Red
    1156 LED Tail Light Bulb, 1 Inch, Red
    x
                

    These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1156 bulbs have the pins straight across and a single contact on the plug. The bulbs appear to be clear, but are red when illuminated.

    LED bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LED's will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.) LED lights require so little “juice” that the conventional flasher can’t cope.

    These LED bulbs are made to serve as a conversion replacement for old damaged or missing original bulbs.  They essentially work the same but with greater quality and brighter, clearer light. They can be used as a running light, a brake light, or both.

    • 12 Volt Bulb
    • 1156 bulbs have the pins straight across and a single contact on the plug
    • Red when illuminated
    • 1" Diameter
    • Efficient and use such small amounts of power
    • Requires the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong)
  • Tall Model T Cowl-Tail Lights - Chrome
    Tall Model T Cowl-Tail Lights - Chrome
    x
                

    Fully spun, chrome steel. Model T style cowl light is 9-1/2" tall with 3-1/2" diameter lens. Dual element bulb. Available with amber or red lens. 12 volts.

    Note: Mount bracket is NOT included. Lens must be secured in place with silicone (see Instructions).

     

    Model T Tail Light Assembly Instructions (pdf)


  • 1928-1931 Ford Model A Blue Dot Tail Light Lens
    1928-1931 Ford Model A Blue Dot Tail Light Lens
    x
                

    These replacement red glass taillight lens for '28-'31 Model 'A' Fords feature a blue glass dot accent in the center. The blue dot features a chrome trim ring around it.  These style tail lights were popular for many decades as an aftermarket feature.  Gives a bright lavender appearance when brake light comes on.

    • Original replacements
    • 1928-31 Ford Model A
    • Classic Lynx-Eye blue dot in center
    • Red glass lens
    • Sold each
    • Mounting gasket sold separately
  • Oval LED Tail Light
    $39.99
    Product Rating: 4.75 Stars
    Oval LED Tail Light
    x
                

    This 12-volt LED tail light has a stop/turn/tail and can be mounted on a flat surface. Measures 4-1/2" long x 2-9/16" tall.  Includes a rubber mounting gasket.

    Requires 10-32 mounting bolts (not included).

    LED Tail Light Installation Instructions (PDF) 

  • Billet Aluminum LED Third Brake Light
    Billet Aluminum LED Third Brake Light
    x
                Wire this third brake light in conjunction with tail lights. Billet aluminum with red lens. 

    This LED third brake light is 2" tall and 7" wide. There is one wire coming through the base for power. A ground wire would be attached to the bottom of the mounting bolts at the base.


  • Hagan Street Rods fm4DSR-LEDH Flush Mount 4 Inch Tail Lights Red Dual
    Hagan Street Rods fm4DSR-LEDH Flush Mount 4 Inch Tail Lights Red Dual
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 4" x 0.5" x 0.25" thick
    • Lenses are spaced 0.5" apart
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fm6DSR-LEDH Flush Mount 6 Inch LED Tail Lights Red Dual
    Hagan Street Rods fm6DSR-LEDH Flush Mount 6 Inch LED Tail Lights Red Dual
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 6" x 0.5" x 0.25" thick
    • Lenses are spaced 0.5" apart
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • 1941 Ford Style LED Flush Mount Tail Light, Red
    1941 Ford Style LED Flush Mount Tail Light, Red
    x
                
    • 1941 Ford Style Flush Mount Design
    • 21 super bright LEDs
    • Complete with polycarbonate lens
    • Die cast chrome plated bezel
    • Epoxy coated, fully sealed electronics
    • 1157 style plug
    • Operates on 7.7 - 14.0 VDC
    • The bezel is 5-3/16" long by 1-7/8" tall by .550" thick
  • Ford 1932 Car/1932-1945 Pickup Blue Dot Tail Light Lens, Red Glass
    Ford 1932 Car/1932-1945 Pickup Blue Dot Tail Light Lens, Red Glass
    x
                

    These replacement red glass tail light lens for 1932 Ford passenger cars and 1932-45 pickup trucks feature a blue glass dot accent in the center. The blue dot features a chrome trim ring around it.  These style tail lights were popular for many decades as an aftermarket feature.  Gives a bright lavender appearance when brake light comes on.

    • Original replacements
    • 1932 Ford passenger cars and 1932-45 Ford pickups
    • Mounting gasket sold separately
    • Classic Lynx-Eye blue dot in center
    • Red glass lens
    • Sold each

     

  • Custom 1932 Ford Tail Light
    $99.99
    Custom 1932 Ford Tail Light
    x
                

    These beautiful tail lights are contoured to fit the rear sweep below the trunk lid of your 1932 Ford and several other applications. With properly engineered focal lengths, these are the brightest tail lights available. Features a chrome bezel, red bullet lens and factory OEM 3057 bulb and socket. Gasket, mounting hardware and template to assist in cutting the mount hole are included.

    • Chromed plastic housing/reflector
    • Aluminum mounting bracket
    • Foam rubber gasket
    • Plastic lens
    • Stainless screws
    • Sold individually

     

  • 1942-1948 Ford Car Tail Lights
    1942-1948 Ford Car Tail Lights
    x
                

    Duplicate of original 1942-1948 Ford passenger car taillights with polished stainless steel housings complete with red glass lens. Uses a single 1157 dual filament bulb (included). Mounting gasket NOT included.

    • Highly polished stainless steel housing & rim
    • Cloth braided wire loom
    • 12 volt bulb
    • Red glass lens
  • 1941-1948 Chevy Tail Light Assembly
    1941-1948 Chevy Tail Light Assembly
    x
                High quality, true replica of the 1941-1948 Chevy passenger car tail light assembly. Polished stainless steel rim, red glass lens, steel housing. 12 volt. 

     


  • 1928-1931 Ford Model A Replacement Tail Light Lens
    1928-1931 Ford Model A Replacement Tail Light Lens
    x
                

    These replacement taillight lens for '28-'31 Model 'A' Fords feature quality red glass that replicate exactly that of the original style.

    • Quality red glass
    • Replacement taillight
    • Secures with two screws
    • Mounting gasket sold separately
  • Universal Compact Double Filament Tail Light Bulb
    Universal Compact Double Filament Tail Light Bulb
    x
                

    Compact dual filament tail light bulb with 1157 style base (with offset pins). Same function as a 1157 bulb, but with a smaller bulb. Universal replacement bulb for tail light applications. Measures 1-1/2" from bottom to the top.

    Works as a replacement bulb for accessory lights 316-0175 and 316-0176.

  • 1940 Ford Tail Lights
    $27.99
    Product Rating: 5.00 Stars
    1940 Ford Tail Lights
    x
                

    Standard tail light assemblies for your 1940 Ford car use a common 1157 bulb for the stop, tail, and turn signal functions. This tail light is designed to bolt into a 1940 Ford fender in place of the original tail light.

    • Stainless steel rim
    • Original "Duolamp" lettering
    • Cloth braided wiring
    • Glass red lens
    • 12 V dual filament 1157 bulb

    Lamps sold individually. Mounting gaskets NOT included.

  • Tall Model T Cowl/Tail Lights - Brass
    Tall Model T Cowl/Tail Lights - Brass
    x
                

    Fully spun, polished brass. Model T style tail light is 9-1/2" tall with 3-1/2" diameter lens. Dual element bulb. Available with amber or red lens. 12 volts.

    Note: Bracket is NOT included. Lens must be secured in place with silicone (see Instructions).

     

    Model T Tail Light Assembly Instructions (pdf)

  • Hagan Street Rods 4-3RDLED 4 Inch Flush-Fit Third Brake Light
    Hagan Street Rods 4-3RDLED 4 Inch Flush-Fit Third Brake Light
    x
                

    There's no cleaner way to integrate a third brake light into your street rod than with one of these flush-fit kits. These lights are designed to be mounted into the body, and then the lens is sanded down and polished flush with the body surface. Each light has a stainless steel housing and comes with a roll of super bright LED lights.

    • Housing is stainless steel
    • Has a electronic LED strip with 15 super bright red LED's
    • Lens is 1/2" by 4"
    • Comes with T bolts to hold housing in place
  • Hagan Street Rods fm8 3rdLED 8 Inch Flush-Fit Third Brake Light
    Hagan Street Rods fm8 3rdLED 8 Inch Flush-Fit Third Brake Light
    x
                

    There's no cleaner way to integrate a third brake light into your street rod than with one of these flush-fit kits. These lights are designed to be mounted into the body, and then the lens is sanded down and polished flush with the body surface. Each light has a stainless steel housing and comes with a roll of super bright LED lights.

    • Housing is stainless steel
    • Has a electronic LED strip with 30 super bright red LED's
    • Lens is 1/2" by 8"
    • Comes with T bolts to hold housing in place
  • Hagan Street Rods 6-3RDLED 6 Inch Flush-Fit Third Brake Light
    Hagan Street Rods 6-3RDLED 6 Inch Flush-Fit Third Brake Light
    x
                

    There's no cleaner way to integrate a third brake light into your street rod than with one of these flush-fit kits. These lights are designed to be mounted into the body, and then the lens is sanded down and polished flush with the body surface. Each light has a stainless steel housing and comes with a roll of super bright LED lights.

    • Housing is stainless steel
    • Has a electronic LED strip with 20 super bright red LED's
    • Lens is 1/2" by 6"
    • Comes with T bolts to hold housing in place
  • 1938-1939 Lincoln Zephyr LED Tail Lights
    1938-1939 Lincoln Zephyr LED Tail Lights
    x
                

    These tail lights are flat on the back for easy mounting to most any surface, as each only needs 3 holes (1/4" Diameter) drilled in the mount surface. Wired for tail light, stoplight, and turn signals. 12V. Includes base gasket.

    • Ground - Green
    • Tail - Black
    • Stop - Red
    • Turn - Yellow (pulsing)
  • 1931-1932 Chevy Blue Dot Tail Light Lens
    1931-1932 Chevy Blue Dot Tail Light Lens
    x
                

    These replacement red glass tail light lens for 1931-1932 Chevys feature a blue glass dot accent in the center. The blue dot features a chrome trim ring around it.  These style tail lights were popular for many decades as an aftermarket feature.  Gives a bright lavender appearance when brake light comes on.

    • Original replacements
    • 1931-1932 Chevy
    • Classic Lynx-Eye blue dot in center
    • Red glass lens
    • Sold each
    • Mounting gasket sold separately

     

  • 1938-1939 Ford Mini Zephyr LED Tail Lights
    1938-1939 Ford Mini Zephyr LED Tail Lights
    x
                

    Each of these complete 1938-1939 Ford Mini Zephyr LED Signature Series tail lights are optimized for visibility and proper fit on the car. All of our tail lights include a pressure cast bezel, a molded-in reflector for lights-off safety, and stainless steel hardware.

    Plus, with RapidFire technology, the brake lights are pulsed rapidly three times within the first 1/2 second of pressing the brake pedal followed by constant ON. This cycle is repeated every time the brake pedal is pressed. We think this is a valuable safety feature, but can be overridden at time of installation.

  • 1950 Pontiac LED Tail Light Assembly
    1950 Pontiac LED Tail Light Assembly
    x
                

    Chrome rim with powerful red LED tail lights. An excellent replacement for your 1950 Pontiac or custom application.

    • 41 super bright red LEDs
    • Polished stainless steel housing
    • Epoxy coated, fully sealed electronics
    • Solid state circuit board for 12V systems
    Taillight-to-body mount gasket NOT included.
Goto Previous PagePrevious Page
1 2