Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"rear metric caliper" Page 1 of 2

  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts.

    Hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31932 Instructions (PDF)

  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Steel hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31931 Instructions (PDF)

  • Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    x
                

    These kits allow you to mount front disc brakes on your 1955-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series). Front disc brakes provide a significant improvement in braking performance versus the drum brakes your old Chevy came with. This disc brake kit works with stock, drum brake spindles only - it does not work with 2" drop spindles. Kit will work with 14" wheels intended for disc brake applications, as well as most 15" (or larger) wheels.

    Rotors are 11" diameter with 5 on 4-3/4" bolt pattern and calipers have 7/16"-20 inlets. This kit will increase track width 7/8" per side or 1-3/4" total when installed. 

    • 11" Rotors
    • 5 on 4-3/4" - bolt pattern
    • Metric calipers
    • Calipers mount behind axle (rearward)
    • Will work with 14" & larger wheels intended for use with disc brakes
    • Bearings, pads, brackets included
    • Seals and hoses
    • Hardware included
    • Increases trac-width 7/8" per side
    • For '55-'64 Chevy fullsize cars. 

    910-31911 Instructions (PDF)

     

  • Ford 9 Inch Bolt-On Rear Disc Brake Kit
    Ford 9 Inch Bolt-On Rear Disc Brake Kit
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM metric style calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31902 Instructions (PDF)

  • GM Metric Disc Brake Kit for 910-34921 1955-57 2" Drop Spindles
    GM Metric Disc Brake Kit for 910-34921 1955-57 2" Drop Spindles
    x
                

    Disc brake kit features 10-½” GM vented cast iron rotors and 1978-88 GM metric single piston calipers.

    • 10-1/2" rotors (O.E. on 1979-81 GM Midsize: Malibu, Monte Carlo, Cutlass, Regal, etc.) 
    • 5 x 4-3/4" bolt pattern
    • Rubber Brake Lines
    • 1978-88 GM Metric Calipers
    • 7/16"-20 inlet fitting
    • Includes all hardware: pads, slide bolts, seals, inner & outer wheel bearings, spindle nuts, dust caps

    Spindles sold separately.

    910-31992 Instructions (PDF)

  • Weld-On 1978-88 GM Metric Caliper Bracket
    Weld-On 1978-88 GM Metric Caliper Bracket
    x
                

    Mounts 1978-1988 GM front caliper to any 3" tube rear end using 11-3/4" diameter rotors. Fully machined steel with punched lightening holes. Measures approximately 5-1/2" between mounting holes.

    IMCA APPROVED

  • Wilwood 120-9333 GM Iron Metric Caliper, 2 Inch Piston
    Wilwood 120-9333 GM Iron Metric Caliper, 2 Inch Piston
    x
                

    These all new cast, not rebuilt iron calipers are bolt-on replacements for 1978 and later GM Metric calipers widely used in "spec" racing categories and low cost disc brake conversions. Not IMCA pproved.

    Wilwood iron GM Metric calipers combine new part quality with modern machining precision. There are two piston size options to assist builders with properly building static bias into a car. Previously, builders using the metric calipers generally had to mount the same size calipers on all four wheels. This drastically limited the tuning options and often created front to rear bias ratios that were not conducive to good handling and stability under hard braking. Some builders, and other brake suppliers, chose to offer re-machined OE calipers to provide a bias tuning option. Unfortunately re-machining a used casting that was never designed for the larger bore size, can create real compromises in strength, reliability and performance. 

    To address these needs, Wilwood has tooled up two separate castings that are fitted with either 2.75" or 2" stainless steel pistons and high temperature bore seals. Each casting is designed specific for its intended bore size. The calipers are strong and precise, without unnecessary added weight from oversized castings. The stainless steel pistons resist corrosion while helping to slow the heat transfer from the pads. The high temperature seals provide long service life when u

  • AFCO 7241-9002 Oversized 2-3/4 Inch GM Metric Caliper, Left Hand Side
    AFCO 7241-9002 Oversized 2-3/4 Inch GM Metric Caliper, Left Hand Side
    x
                

    These are based on the popular GM Metric calipers with 5-1/2" mounting centers.

    • Oversize: 6.4 lbs.
    • 10mm - 1.5 inlet

    Oversized Metric Calipers:

    Can be used in the rear of open wheel modifieds and street stocks racing on dirt surfaces to increase rear brake bias. Can be used on the front of open wheel modifieds and street stocks racing on pavement surfaces.

     

  • AFCO 7241-9005 Undersized 2-1/4 Inch GM Metric Caliper, RH Side
    AFCO 7241-9005 Undersized 2-1/4 Inch GM Metric Caliper, RH Side
    x
                

    These are based on the popular GM Metric calipers with 5-1/2" mounting centers.

    • Undersized: 6.620 lbs.
    • 10mm - 1.5 inlet

    Undersized Metric Calipers:

    Can be used on the right front of open wheel modifieds and street stocks on dirt surfaces to reduce right front braking bias to aid in corner entry. Can be used on the rear of open wheel modifieds and street stocks racing on pavement to reduce rear brake bias.

     

  • AFCO 7241-9001 Oversized 2-3/4 Inch GM Metric Caliper, Right Hand Side
    AFCO 7241-9001 Oversized 2-3/4 Inch GM Metric Caliper, Right Hand Side
    x
                

    These are based on the popular GM Metric calipers with 5-1/2" mounting centers.

    • Oversize: 6.4 lbs.
    • 10mm - 1.5 inlet

    Oversized Metric Calipers:

    Can be used in the rear of open wheel modifieds and street stocks racing on dirt surfaces to increase rear brake bias. Can be used on the front of open wheel modifieds and street stocks racing on pavement surfaces.

  • Wilwood 120-8924 GM Iron Metric Caliper, 2-3/4 Inch Piston
    Wilwood 120-8924 GM Iron Metric Caliper, 2-3/4 Inch Piston
    x
                

    These all new cast, not rebuilt iron calipers are bolt-on replacements for 1978 and later GM Metric calipers widely used in "spec" racing categories and low cost disc brake conversions. Not IMCA pproved.

    Wilwood iron GM Metric calipers combine new part quality with modern machining precision. There are two piston size options to assist builders with properly building static bias into a car. Previously, builders using the metric calipers generally had to mount the same size calipers on all four wheels. This drastically limited the tuning options and often created front to rear bias ratios that were not conducive to good handling and stability under hard braking. Some builders, and other brake suppliers, chose to offer re-machined OE calipers to provide a bias tuning option. Unfortunately re-machining a used casting that was never designed for the larger bore size, can create real compromises in strength, reliability and performance. 

    To address these needs, Wilwood has tooled up two separate castings that are fitted with either 2.75" or 2" stainless steel pistons and high temperature bore seals. Each casting is designed specific for its intended bore size. The calipers are strong and precise, without unnecessary added weight from oversized castings. The stainless steel pistons resist corrosion while helping to slow the heat transfer from the pads. The high temperature seals provide long service life when u

  • Economy Bolt-On Front/Rear Brake Kit for Ford Spindle
    Economy Bolt-On Front/Rear Brake Kit for Ford Spindle
    x
                Complete the front and rear suspension assembly on your T roadster chassis with a bolt-on brake kit specifically designed for our '37-'41 Ford style spindles and 9" Ford rear end. Each kit includes all necessary components: new rotors (available with 5-on-4.5" or 5-on-4.75" bolt pattern), remanufactured GM Metric calipers, caliper brackets, brake pads, bearings, seals and hardware. Rear kit bots on new-style Big Ford ends.
            
  • Economy Bolt-On Front/Rear Brake Kit for Chevy Spindle
    Economy Bolt-On Front/Rear Brake Kit for Chevy Spindle
    x
                

    Complete the front and rear suspension assembly on your T roadster chassis with a bolt-on brake kit specifically designed for our '49-'54 Chevy style spindles and 9" Ford rear end. Each kit includes all necessary components: new rotors (available with 5-on-4.5" or 5-on-4.75" bolt pattern), remanufactured GM Metric calipers, caliper brackets, brake pads, bearings, seals and hardware. Rear kit bots on new-style Big Ford ends.

    Chevy Spindle Brake Kit Instructions (PDF) 

  • Big Bore GM Metric 1978-88 Brake Caliper
    Big Bore GM Metric 1978-88 Brake Caliper
    x
                

    If you are using 1978-88 GM Metric style brake calipers your choices of piston sizes are pretty much limited to 2-1/2". This isn't bad unless you want to 'tune' your braking by using different size calipers front to rear. By using a larger 2-3/4" piston you will increase the braking force at a wheel over a wheel using a smaller piston.

    Bleeder and inlet are both 10mm-1.5 inlet allowing the caliper to be used on either side. Plus, these calipers have been ground smooth to make them easier to paint.

    Includes pads and hardware. Sold as EACH.

    • 20% increase in stopping power over stock calipers
    • Can used on the left and right sides
    • Extra ribs have been added internally while unnecessary weight was removed
    • Lighter, stronger, has more stopping power than OEM calipers
    • Each caliper includes:
      • brake pads
      • clips
      • slide pins
      • banjo bolt
      • washers
      • bleeder screw
  • Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 1.59 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '78-'88 GM metric car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, aluminum brake hats (1.59" backspace), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31915 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 3 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '78-'88 GM metric car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (3" backspace, 6-1/4" I.D.), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31925 Instructions (PDF)

  • GM 7.5 Inch 10 Bolt Bolt-On Rear Brake Kit
    GM 7.5 Inch 10 Bolt Bolt-On Rear Brake Kit
    x
                

    If you don't want to spend and arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes two bolt-on caliper brackets, two 11-5/8" vented rotors, two GM metric style calipers, brake pads and hardware.

    • 5 on 4-3/4" bolt circle
    • Fits over an axle with a maximum flange diameter of 6" O.D.
    • 2.872" rotor center hole
    • Requires a minimum 14-5/8" I.D. for caliper clearance 

    910-31923 Instructions (PDF)

  • Speedway IMCA Mod Brake Kit
    $489.99
    Speedway IMCA Mod Brake Kit
    x
                Our affordable Speedway brake system comes with everything you'll need for your IMCA racer.

    Kit includes:
    • GM Metric Clamp-on Calipers
    • 7/16"-20 RH & LH Metric Calipers
    • Wilwood Polymatrix D Brake Pads
    • GM Caliper Slide Bolt
    • 7/16" to AN4 Banjo Fitting
    • 7/16"-20" Banjo Bolt
    • 18" Brake Line w/ Straight
    • 26" Brake Line w/ 90° End
    • 3/8"-24 Female to AN4 Fitting
    • Lightweight Brake Line Kit
  • AFCO 7250-0200 Complete Rear Disc Brake Kit, 2-1/2 Inch Piston
    AFCO 7250-0200 Complete Rear Disc Brake Kit, 2-1/2 Inch Piston
    x
                Complete kit with standard GM metric calipers. Mounts vented rotors and calipers to 3" tube rearend. Complete with rotors, hats, calipers, brackets, brake pads and slide bolts. Hat fits 4-1/2", 4-3/4" and 5" bolt circle. 
            
  • AFCO 7250-0210 Complete Rear Disc Brake Kit, 2-3/4 Piston
    AFCO 7250-0210 Complete Rear Disc Brake Kit, 2-3/4 Piston
    x
                Complete kit with oversized GM metric calipers. Mounts vented rotors and calipers to 3" tube rearend. Complete with rotors, hats, calipers, brackets, brake pads and slide bolts. Hat fits 4-1/2", 4-3/4" and 5" bolt circle. 
            
  • AFCO 7250-0120 GM 7.5 Inch Axle Brake Kit
    AFCO 7250-0120 GM 7.5 Inch Axle Brake Kit
    x
                

    These rear disc brake kits allow you to simply bolt disk brakes onto your 7.5" GM rearend. Includes two bolt-on caliper brackets, two vented rotors, two new single-piston GM Metric calipers and hardware. Has 5 x 4-3/4" bolt pattern.

    Minor fitting to axle housing may be required. 

    Kit includes:

    • 11-5/8" one-piece vented iron rotors
    • Caliper brackets
    • Metric calipers, 2-1/2" pistons
      • 10mm - 1.5 inlet
    • Brake pad spacers
    • AFCO C1 pads
      • Medium-High temp rating
      • Extremely rotor friendly, exceptional pad life
    • Slide bolts
    • All hardware included

     

  • AFCO 7250-0100 Ford 9 Inch Axle Brake Kit
    $384.99
    $408.99
    AFCO 7250-0100 Ford 9 Inch Axle Brake Kit
    x
                

    These rear disc brake kits allow you to simply bolt disc brakes on your 9" Ford rearend. Includes two bolt-on caliper brackets, two vented rotors, two new GM Metric calipers and hardware. Has 5 x 4-1/2" bolt pattern.

    Minor fitting to axle housing may be required. 

    Kit includes:

    • 11-1/2" one-piece vented iron rotors
    • Caliper brackets
    • Metric calipers, 2-1/2" pistons
      • 10mm - 1.5 inlet
    • Brake pad spacers
    • AFCO C1 pads
      • Medium-High temp rating
      • Extremely rotor friendly, exceptional pad life
    • Slide bolts
    • All hardware included

     

  • AFCO 7250-0110 GM 10 & 12 Bolt Axle Brake Kit
    AFCO 7250-0110 GM 10 & 12 Bolt Axle Brake Kit
    x
                

    These rear disc brake kits allow you to simply bolt disc brakes on your GM 12 Bolt rearend. Includes two bolt-on caliper brackets, two vented rotors, two new GM Metric calipers and hardware. Has both 5 x 4-1/2" and 5 x 4-3/4" bolt pattern.

    Kit includes:

    • 11-1/4" one-piece vented iron rotors
    • Caliper brackets
    • Metric calipers, 2-1/2" pistons
      • 10mm - 1.5 inlet
    • Brake pad spacers
    • AFCO C1 pads
      • Medium-High temp rating
      • Extremely rotor friendly, exceptional pad life
    • Slide bolts
    • All hardware included

    Minor fitting to axle housing may be required. 

  • GM 10 & 12 Bolt Bolt-On Rear Disc Brake Kit
    GM 10 & 12 Bolt Bolt-On Rear Disc Brake Kit
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This complete kit includes two bolt-on caliper brackets, two 11-1/4" vented rotors, two GM metric style calipers, brake pads and hardware.

    • Rotors have both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • Fits axle with a maximum flange diameter of 6-1/4" O.D.
    • 2.780" rotor center hole
    • Does not fit all 10 & 12 bolt axles. Check Application tab for details. 

    Axle Flange Identification Chart (GIF)

    910-31919 Instructions (PDF)

  • Speedway Granada 10-1/2 Inch Brake Caliper Bracket, LH
    Speedway Granada 10-1/2 Inch Brake Caliper Bracket, LH
    x
                

    These brackets are used to mount a GM "metric" calipers to 1974-1980 Pinto/Mustang II spindles for use with what is basically a "Granada" 10-1/2" brake rotor. Steel, bolt-on design mounts the caliper on the rear side of the left front wheel.

  • Speedway Granada 10-1/2 Inch Brake Caliper Bracket, RH
    Speedway Granada 10-1/2 Inch Brake Caliper Bracket, RH
    x
                

    These brackets are used to mount a GM "metric" calipers to 1974-1980 Pinto/Mustang II spindles for use with what is basically a "Granada" 10-1/2" brake rotor. Steel, bolt-on design mounts the caliper on the rear side of the right front wheel.

  • Wilwood 150-8936K BP-10 GM Metric 1978-Up Brake Pads
    Wilwood 150-8936K BP-10 GM Metric 1978-Up Brake Pads
    x
                

    Speedway Motors is your one-stop shop for GM 1978-Up Midsize caliper brake pads.

    • Medium friction, smooth engagement, low abrasion on iron rotors.
    • Flat torque curve.
    • Low to medium wear rate, increases as temperature increases.

    Brake Pad Brochure (PDF)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side. 

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Wilwood 15E-6103K Poly-E GM Metric 1978-Up Brake Pads
    Wilwood 15E-6103K Poly-E GM Metric 1978-Up Brake Pads
    x
                

    Speedway Motors is your one-stop shop for GM 1978-Up Midsize caliper brake pads.

    Brake Pad Brochure (PDF)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side. 

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Wilwood 150-9422K BP-20 GM Metric 1978-Up Brake Pads
    Wilwood 150-9422K BP-20 GM Metric 1978-Up Brake Pads
    x
                

    Speedway Motors is your one-stop shop for GM 1978-Up Midsize caliper brake pads.

    Brake Pad Brochure (PDF)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side. 

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • AFCO 40121C 3 Inch Tube Clamp-On Caliper Bracket, Small GM
    AFCO 40121C 3 Inch Tube Clamp-On Caliper Bracket, Small GM
    x
                

    AFCO clamp-on rear disc brake caliper bracket for 3 inch diameter axle tube. For smaller GM metric calipers. Stop-bolt recommended and included with bracket

    106-40121C Instructions (PDF) 

  • Speedway Soft Street Brake Pads, GM Metric 1978-UP
    Speedway Soft Street Brake Pads, GM Metric 1978-UP
    x
                

    Speedway soft brake pad for GM Metric 1978-Up.

    Sold as one set of 4 (ST); outfits two calipers.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side.

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • AFCO 9850-6505 10 Inch Hybrid Brake Rotor for Pinto
    AFCO 9850-6505 10 Inch Hybrid Brake Rotor for Pinto
    x
                

    This brake rotor combines the strength of a '75-'81 Ford-style hub (Granada) with the lighter design of the metric brake rotor for an unbeatable lightweight and durable package.  AFCO engineers designed this rotor with the latest CAD software and testing methods.  Manufactured to withstand rigorous racing environments, the AFCO Hybrid Rotor uses totally new castings designed and built specifically for racing.  It will remove up to 12 lbs. of sprung weight on the front of your car to improve front to rear weight bias and wheel control.

    • Uses GM metric caliper
    • Ford '74-'80 Pinto Spindle
    • Strong and Lightweight
    • Safely remove up to 13 lbs from the front of your car vs stock rotor
    • 14.8# total rotor weight with 5/8" studs
    • 10.13" diameter
    • .813" thickness (pad spacer recommended)

    Instructions (PDF) 

  • AFCO 7250-0300 Basic Rear Disc Brake Kit
    AFCO 7250-0300 Basic Rear Disc Brake Kit
    x
                Kits for metric calipers. These basic kits include brackets, steel vented rotors, hats and bolts. Caliper brackets weld to 3" tube rearend. Hat fits 4-1/2", 4-3/4" and 5" bolt circle. 
            
  • Speedway 156 1978-Up GM Metric Brake Pads
    Speedway 156 1978-Up GM Metric Brake Pads
    x
                

    The Speedway 156 brake pad works with aluminum or steel rotors. Best pad for aluminum rotors. Features a low metallic compound for long life and excellent street performance.

    Sold as one pair (PR); outfits one caliper.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side.

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Deluxe 1978-88 Metric Chassis 9 Inch Ford Axle Bracket Kit
    Deluxe 1978-88 Metric Chassis 9 Inch Ford Axle Bracket Kit
    x
                

    You can weld these brackets to your 9" Ford housing and install it in your GM Metric chassis. Includes upper and lower control arm mounts. Welding required. Designed for 3-1/2" axle tubes, but can be fit to 3" tubes.

    This Deluxe rear end bracket set features multiple holes (5) for mounting the lower control arms. Also included is a pair of weld-on brackets for mounting the Metric brake calipers. The lower mounts in this kit have only one shock mount position. 

    This kit is NOT IMCA Hobby Stock legal but is IMCA Stock Car approved. 

  • AFCO 40121 Weld-On Rear Caliper Bracket, 1/4 Inch Thick
    AFCO 40121 Weld-On Rear Caliper Bracket, 1/4 Inch Thick
    x
                

    AFCO weld-on brackets for GM single-piston iron calipers. Fits 3" axle tubes.

  • AFCO 1251-1154 D154 1978-Up GM Metric Pads
    AFCO 1251-1154 D154 1978-Up GM Metric Pads
    x
                Please view the product's page for more information
            
  • Garage Sale - AFCO 7241-9005 Undersized 2-1/4 Inch GM Metric Caliper, RH Side
    Garage Sale
    Garage Sale - AFCO 7241-9005 Undersized 2-1/4 Inch GM Metric Caliper, RH Side
    x
                

    These are based on the popular GM Metric calipers with 5-1/2" mounting centers.

    • Undersized: 6.620 lbs.
    • 10mm - 1.5 inlet

    Undersized Metric Calipers:

    Can be used on the right front of open wheel modifieds and street stocks on dirt surfaces to reduce right front braking bias to aid in corner entry. Can be used on the rear of open wheel modifieds and street stocks racing on pavement to reduce rear brake bias.

     

    This caliper is garage sale priced because it has been test fit and returned. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - AFCO 7250-0120 GM 7.5 Inch Axle Brake Kit
    Garage Sale
    Garage Sale - AFCO 7250-0120 GM 7.5 Inch Axle Brake Kit
    x
                Please view the product's page for more information
            
  • Garage Sale - 9 Inch Ford Bolt-On Rear Disc Brake Kit, With Emergency Brake Calipers
    Garage Sale
    Garage Sale - 9 Inch Ford Bolt-On Rear Disc Brake Kit, With Emergency Brake Calipers
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2