Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"rear disc wheel" Page 1 of 6

  • Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    x
                

    These kits allow you to mount front disc brakes on your 1955-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series). Front disc brakes provide a significant improvement in braking performance versus the drum brakes your old Chevy came with. This disc brake kit works with stock, drum brake spindles only - it does not work with 2" drop spindles. Kit will work with 14" wheels intended for disc brake applications, as well as most 15" (or larger) wheels.

    Rotors are 11" diameter with 5 on 4-3/4" bolt pattern and calipers have 7/16"-20 inlets. This kit will increase track width 7/8" per side or 1-3/4" total when installed. 

    • 11" Rotors
    • 5 on 4-3/4" - bolt pattern
    • Metric calipers
    • Calipers mount behind axle (rearward)
    • Will work with 14" & larger wheels intended for use with disc brakes
    • Bearings, pads, brackets included
    • Seals and hoses
    • Hardware included
    • Increases trac-width 7/8" per side
    • For '55-'64 Chevy fullsize cars. 

    910-31911 Instructions (PDF)

     

  • Ford 9 Inch Bolt-On Rear Disc Brake Kit
    Ford 9 Inch Bolt-On Rear Disc Brake Kit
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM metric style calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31902 Instructions (PDF)

  • Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    x
                

    Front disc brakes provide a significant improvement in braking performance versus the drum brakes your car came with. This complete front disc brake conversion kit fits 1964-72 GM A-Body, 1967-69 GM F-Body and 1968-74 X-Body using your stock disc brake spindles or our new replacement stock height disc brake spindles # 910-34900.

    Kit includes 11" diameter vented brake rotor with 5 on 4-3/4" wheel bolt pattern, '69-'77 GM style calipers (7/16"-20 inlets), caliper brackets, brake pads, backing plates, rubber brake lines, and all necessary bearings, seals and hardware for an easy, complete installation onto factory disc brake spindles.

    Note:  Brake kit will not fit our 2" dropped spindles # 910-34906 or stock drum brake spindles. Must be used with stock style disc brake spindles and 15" diameter or larger wheels.

    910-31958 Instructions (PDF)

  • Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
    Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM emergency brake calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31921 Instructions (PDF)

  • Currie 1967-69 Camaro/Firebird 9 Inch Rearend Kit w/Multi-Leaf Springs
    Currie 1967-69 Camaro/Firebird 9 Inch Rearend Kit w/Multi-Leaf Springs
    x
                Please view the product's page for more information
            
  • T-Bucket Stainless Brake Line Kit
    T-Bucket Stainless Brake Line Kit
    x
                

    Complete your '23 T-Bucket chassis with this pre-bent Stainless Steel brake line kit. Includes all lines, proportioning valve, residual pressure valves, brake pressure switch, fittings, and hardware necessary to properly plumb the brakes on your T.

    Notes: Does not work with '27 T chassis.  Also of note, due to unlimited rear axle brake combinations, this kit will not include rear axle housing brake lines, hoses, or fittings.  The kit will include the AN style brake hose to transfer from the rear crossmember to the housing.  The chassis builder/installer will then need to continue the brake line system from that point on to both rear wheels with necessary brake fitting hardware as needed.

    Due to the different brakes and caliper combinations, this kit will NOT include caliper/wheel cylinder fittings.

    Learn more about the proper uses of residual and proportioning valves and by reading our tech article. Brake System Selection.  

  • Currie 1968-72 Nova and GM X-Body 9 Inch Rearend Kit w/Mono Leaf Springs
    Currie 1968-72 Nova and GM X-Body 9 Inch Rearend Kit w/Mono Leaf Springs
    x
                Please view the product's page for more information
            
  • Currie 1967-70 Mustang 9 Inch Replacement Rear Axle
    Currie 1967-70 Mustang 9 Inch Replacement Rear Axle
    x
                Please view the product's page for more information
            
  • Wilwood 140-7139 Rear Disc Brake Kit, Big Ford 9 Inch, Old 2.36 Offset
    Wilwood 140-7139 Rear Disc Brake Kit, Big Ford 9 Inch, Old 2.36 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" NPT inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407139 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • Currie 1968-72 GM A-Body 9 Inch Crate Rearend Kit
    Currie 1968-72 GM A-Body 9 Inch Crate Rearend Kit
    x
                

    Now you can have the strength and serviceability that Ford drivers have enjoyed for years underneath your GM vehicle. Currie Crate Rearends are built using the stock overall width, pinion offest, and mounting points of your original rear axle housing, making it a 100% bolt-in upgrade.  Designed as a bolt-in kit for 1968-72 Chevelle, El Camino, Skylark, Cutlass, LeMans/GTO, and 1970-72 Monte Carlo applications.

    • All new 9-Plus heavy duty housing
    • Urethane upper control arm busings installed
    • 31 spline performance axle shafts
    • 61-1/4" width
    • Torino-style late model large bearing housing ends
    • Third member studs installed
    • Axles drilled for stock 5 on 4-3/4" wheel bolt pattern
    • 7/16"-20 wheel studs pressed into axles
    • 1/4” thick heavy duty bearing retainer plates
    • Tapered Timken style wheel bearings pressed onto axle

    Note: Works with Speedway rear disc brake kits, 11" Ford Explorer disc brakes, and Wilwood disc brakes. Third member sold separately.

    How to Measure Your Housing Tech Tip (Link)

    To learn more about Currie's 9+ rearends, c

  • Currie 1968-72 Nova Multi-leaf 9 Inch Rear Axle
    Currie 1968-72 Nova Multi-leaf 9 Inch Rear Axle
    x
                Please view the product's page for more information
            
  • Wilwood 140-7143 Rear Disc Parking Brake Kit, Ford 9 Inch, 2.66 Offset
    Wilwood 140-7143 Rear Disc Parking Brake Kit, Ford 9 Inch, 2.66 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" npt inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407143 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • Currie 1970-81 Camaro/Firebird 9 Inch Crate Rearend Kit
    Currie 1970-81 Camaro/Firebird 9 Inch Crate Rearend Kit
    x
                Please view the product's page for more information
            
  • Currie 1955-57 Chevy 9 Inch Replacement Rear Axle Kit
    Currie 1955-57 Chevy 9 Inch Replacement Rear Axle Kit
    x
                Please view the product's page for more information
            
  • Wilwood 140-7140 Rear Disc Brake Kit, Big Ford 9 Inch New 2-1/2 Offset
    Wilwood 140-7140 Rear Disc Brake Kit, Big Ford 9 Inch New 2-1/2 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" npt inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407140 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • Currie 1967-69 Camaro/Firebird 9 Inch Rearend Kit w/Mono Leaf Springs
    Currie 1967-69 Camaro/Firebird 9 Inch Rearend Kit w/Mono Leaf Springs
    x
                Please view the product's page for more information
            
  • Currie 1979-93 Fox Mustang 9 Inch Rear Axle
    Currie 1979-93 Fox Mustang 9 Inch Rear Axle
    x
                Please view the product's page for more information
            
  • Currie 1964-66 GM A-Body 9 Inch Crate Rearend Kit
    Currie 1964-66 GM A-Body 9 Inch Crate Rearend Kit
    x
                Please view the product's page for more information
            
  • Adjustable Proportioning Blocks With Brake Light Switch
    Adjustable Proportioning Blocks With Brake Light Switch
    x
                

    This adjustable proportioning block allows you to run lines from the master cylinder to the block and then to the appropriate wheels. What is neat about it is that it also contains the proportioning valve and brake light switch. This dramatically reduces the amount of fittings needed and potential leaks.

    The adjustable proportioning valve regulates rear brake pressure, helping to maintain correct brake bias between front and rear brakes. It is designed for dual bowl master cylinders. The distribution block connects to the master cylinder and distributes brake fluid to all four wheels. An easy to turn handle with directional arrows makes it simple to either increase or decrease rear brake pressure.

    The block accepts 3/16" brake lines and the inlets and outlets on this unit are 3/8"-24 inverted flare females.  It has two inlets from the master cylinder, two outlets to the front brakes and one outlet to the rear brakes.  It includes five stainless steel 3/16" fittings and wiring pigtail for rear brake light switch. Mounts to any convenient location. This is not a direct factory replacement for original blocks. Some line modifications may be necessary.

    910-31358 Instructions (PDF)

    Learn more about how adjustable proportioning valves work by reading our tech ar

  • Currie 1964-66 Mustang 9 Inch Replacement Rear Axle
    Currie 1964-66 Mustang 9 Inch Replacement Rear Axle
    x
                Please view the product's page for more information
            
  • Replacement 11-1/4 Inch Rear Brake Rotor
    Replacement 11-1/4 Inch Rear Brake Rotor
    x
                

    These 11-1/4" one-piece, vented iron disc brake rotors are for rear disc brake applications. Features dual bolt patterns for 5 x 4.5" (Ford/Mopar) and 5 x 4.75" (Chevy/GM) wheels. 

    • Center Hole:  2.78"
    • Backspace:  2.30"
    • Maximum Axle Flange Diameter:  6-1/4"
    • Thickness:  1"
    • Thickness @ Center of Rotor:  0.236"
  • Speedway 1955-57 Chevy Deluxe Front Disc Brake Kit
    Speedway 1955-57 Chevy Deluxe Front Disc Brake Kit
    x
                

    Just what's needed to update your classic Tri-Five Chevy! Eliminate those archaic ball bearings and gain first class stopping power all at once with this front disc brake conversion kit. Rotors and caliper brackets bolt onto your original spindles with no modification or machining required. Calipers mount to the front of the spindle.

    This disc brake kit will increase the total front track width by 1-3/4" (7/8” per side).

    • Uses 11" rotors and 1969-72 GM calipers (7/16"-20 inlets)
    • May not clear some 14" wheels
    • Bolts onto stock '55-'57 spindles with no machine work
    • Includes rubber brake hoses

    910-31949 Instructions (PDF)

  • GM Disc/Disc Proportioning Valve for 3/8-24 Outlets
    GM Disc/Disc Proportioning Valve for 3/8-24 Outlets
    x
                

    These proportioning valves are similar to what GM used on many cars in the 70's. They are non-adjustable and may require an adjustable valve in the rear brakes (if needed). Block incorporates metering (for front brakes) and proportioning (for rear brakes) into one unit. For use with four-wheel disc brake systems.

    Includes hard lines to connect to a master cylinder with 3/8"-24 outlets.

    910-31366 Instructions (PDF)

  • GM Disc/Disc Proportioning Valve for 1/2-20, 9/16-18 Outlets
    GM Disc/Disc Proportioning Valve for 1/2-20, 9/16-18 Outlets
    x
                

    These proportioning valves are similar to what GM used on many cars in the 70's. They are non-adjustable and may require an adjustable valve in the rear brakes (if needed). Block incorporates metering (for front brakes) and proportioning (for rear brakes) into one unit. For use with four-wheel disc brake systems.

    Includes hard lines to connect to a master cylinder with 1/2"-20 and 9/16"-18 outlets.

    910-31352 Instructions (PDF)

  • Wilwood 140-1501-B 1937-1948 Ford Medium Duty Disc Brakes
    Wilwood 140-1501-B 1937-1948 Ford Medium Duty Disc Brakes
    x
                Please view the product's page for more information
            
  • Wilwood 140-7141 Rear E-Brake Kit - GM 12 Bolt Axle
    Wilwood 140-7141 Rear E-Brake Kit - GM 12 Bolt Axle
    x
                

    Wilwood'sFDL Pro-Series rear disc kits provide a complete solution for popular GM 12-boltrear axles that require a parking brake. Forged billet Dynalite four piston calipers, 12.19” one-piece drum/rotors, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking.

    E-brake cables sold separately. Fits GM 12-bolts with 2.81" offset and OE C-Clip axles. Does not support Special End or C-Clip Eliminator modifications.

    835-1407141 Instructions (PDF)

    Axle Flange Identification Chart

     

     

    Click Here for Exploded Installation Specs

     

  • GM Metric Disc Brake Kit for 910-34921 1955-57 2" Drop Spindles
    GM Metric Disc Brake Kit for 910-34921 1955-57 2" Drop Spindles
    x
                

    Disc brake kit features 10-½” GM vented cast iron rotors and 1978-88 GM metric single piston calipers.

    • 10-1/2" rotors (O.E. on 1979-81 GM Midsize: Malibu, Monte Carlo, Cutlass, Regal, etc.) 
    • 5 x 4-3/4" bolt pattern
    • Rubber Brake Lines
    • 1978-88 GM Metric Calipers
    • 7/16"-20 inlet fitting
    • Includes all hardware: pads, slide bolts, seals, inner & outer wheel bearings, spindle nuts, dust caps

    Spindles sold separately.

    910-31992 Instructions (PDF)

  • Wilwood 140-2111-B Rear Brake Kit - Olds/Pontiac, 2.81 Offset
    Wilwood 140-2111-B Rear Brake Kit - Olds/Pontiac, 2.81 Offset
    x
                

    Wilwood FDL Pro-Series rear disc brake kits provide a complete solution for the uncommon Olds/Pontiac rear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.

    • Piston Area (in²): 3
    • 1/8" NPT inlet
    • Minimum Wheel Diameter (in): 15
    • BP-10 Smart pads

    These kits do not have emergency brake provisions.

    Dynalite Rear Axle Kit Installation Instructions (PDF)

    Exploded Installation Schematic 

    Kit fits some 15" wheels. Check wheel clearance diagram in kit installation instructions before purchase.

    Axle Flange Identification Chart 

  • 1955-64 Chevy Full-size Car Brake Booster Combo, Disc/Disc, Drum/Drum
    1955-64 Chevy Full-size Car Brake Booster Combo, Disc/Disc, Drum/Drum
    x
                

    When you put modern disc brakes on your 1955-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series), you should update the master cylinder as well. Stock 4-wheel drum master cylinders do not have the capacity to supply the proper amount of pressure for disc brakes. For best results, we recommend using this simple, bolt-on master cylinder booster kit on all 4-wheel disc brake conversions or as a power brake upgrade for 4-wheel drum brake applications.

    • 8" dual diaphragm booster
    • 1" bore master cylinder
    • Adjustable proportioning valve for rear brake line
    • Master cylinder has outlets on both sides for ease of plumbing
    • 1/2"-20 and 9/16"-18 outlets

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Wilwood 140-1501-P 1937-1948 Ford Medium Duty Polished Disc Brakes
    Wilwood 140-1501-P 1937-1948 Ford Medium Duty Polished Disc Brakes
    x
                

    Wilwood Forged Dynalite Pro-Series Front Hub Kits offer a complete disc brake upgrade solution for your 1937-48 Ford spindles. Based on the venerable forged billet Dynalite caliper, these versatile kits suit the braking requirements for a light weight Model T or T bucket type chassis. Medium Duty kits are recommended for use on T bucket type cars up to 2200 pounds with rear discs or on cars up to 2000 pounds with rear drums. 

    Most kits require no modifications for installation, and provide plenty of clearance inside popular 15” wheels. FDL Pro-Series kits can be used with either manual or power boost master cylinders.

    Wilwood Medium Duty Kits Feature:

    • Forged 4-piston Dynalite Calipers
    • 10.75" diameter solid steel rotors - black oxide finish
    • Wilwood BP-10 SmartPads - low noise, low dust
    • Lightweight anodized aluminum hubs

    835-1401501P Instructions (PDF)

    *NOTE*: See Notes tab for important install info. 

  • Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1937-48 Ford spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .38" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Traditional steering arm for left front wheel NOT included with kit.

  • 1932 Lo-Boy Front Disc Brake Kit
    1932 Lo-Boy Front Disc Brake Kit
    x
                

    This brake kit includes Mustang II/Pinto brake components to fit the '32 Lo-Boy 1949-54 Chevy spindles. Kit features 9-1/4" iron rotors, rebuilt single piston calipers, pads, stainless braided AN 4 brake lines, fittings, & hardware.

    NOTE: Kit includes rotors with 5 on 4.5" bolt pattern. If you need the 5 on 4.75" bolt pattern, please specify this in the Comments box on the Order Summary/Payment Info page (page 2) when checking out.

     

  • 1967-1970 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    1967-1970 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    x
                

    This kit allows you to upgrade your 1967-1970 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passenger car bolt circle. A wheel change is required, but you want custom 5-lug wheels on your truck anyway, right? The new 11" rotors fit on your stock drum brake spindles.

    Kit includes 11" rotors, GM Midsize calipers, caliper brackets, bearings, seals, spindle nuts, dust caps, banjo bolts, brake hoses, 11" single diaphragm brake booster, master cylinder, disc/drum proportioning valve, and mounting hardware.

    Only for 1/2 ton trucks 

    Rotor Diameter:  11"
    Caliper Piston Diameter:  2.8"
    Caliper Inlet:  7/16"-20
    Booster Type:  Single Diaphragm (Stock Type) 
    Booster Diameter:  11"
    Proportioning Valve Type:  Disc Front/Drum Rear
    Proportioning Valve Ports:  3/8"-24 Front, 9/16"-18 Rear
    Recommended Brake Line:  3/16" Steel 

  • Chevy Wilwood Front Brake & Steering Kits, 48 Inch Axle
    Chevy Wilwood Front Brake & Steering Kits, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1949-54 Chevy spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .380" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs
  • Garage Sale - Wilwood 140-1501-B 1937-1948 Ford Medium Duty Disc Brakes
    Garage Sale
    Garage Sale - Wilwood 140-1501-B 1937-1948 Ford Medium Duty Disc Brakes
    x
                Please view the product's page for more information
            
  • 1965-1969 Chevy Truck 5-Lug Rear Axle Conversion Kit
    1965-1969 Chevy Truck 5-Lug Rear Axle Conversion Kit
    x
                

    If you've upgraded your truck's front end to late model 5 -lug on 5" Chevrolet truck bolt circle disc brakes, now is the time to upgrade your rear end. With the availability of 5-lug trailing arm rear ends quickly drying up, we now offer 5-lug axles that will install into your 6-lug rear end. Our axles come pre-drilled with a 5-lug on 5" Chevrolet truck bolt circle and fit 1965-69 rear ends. The axles accept 1971-72 truck drums and use the existing brake hardware. Available as a complete kit with axles, wheel studs and new brake drums or the use of the spider gear set. Will not work with 1960-62 trucks.

    Note: Factory 6-lug applications had 7/16" diameter studs and 5 on 5-lug kits have 1/2" diameter studs. 

Goto Previous PagePrevious Page
1 2 3 4 5 6