Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"ram throwout bearing shims" Page 1 of 1

  • Ram Street Stock Hydraulic Throwout Bearing - Ford Tremac
    Ram Street Stock Hydraulic Throwout Bearing - Ford Tremac
    x
                

    Ram hydraulic bearings ease installations in vehicles with chassis constraints, and offer a smooth, lighter pedal effort.

    Kits contain the bearing, shims, fittings for AN# 3 connection, bleed line, and mounting hardware. A 3/4 inch bore master cylinder and AN 3 feed line are required for this installation. For 10-1/2" street stock type clutches. 

    This bearing comes with a new special machined front bearing retainer for the release bearing to ride on. 

    • The sleeve ID 1.379
    • The bearing OD 2.940
    • Length collapsed 2.192
    • Length extended 3.050
    • Stroke .853

    Learn more about hydraulic release bearings and how to properly install them by reading our tech article. How to Install a Hydraulic Throwout Bearing.

  • Ram Street Stock Hydraulic Throwout Bearing - Ford T-5
    Ram Street Stock Hydraulic Throwout Bearing - Ford T-5
    x
                

    Ram hydraulic bearings ease installations in vehicles with chassis constraints, and offer a smooth, lighter pedal effort.

    Kits contain the bearing, bleeder hose assembly, shims and mounting hardware. A 3/4 inch bore master cylinder and AN 3 feed line are required for this installation. For 10-1/2" street stock type clutches. 

    This bearing comes with a new special machined front bearing retainer for the release bearing to ride on.

    • The sleeve ID 1.385
    • The bearing OD 2.940
    • Length collapsed 2.174
    • Length extended 3.032
    • Stroke .867

    NOTE:  NOT meant for use with world class T-5 cases

    Learn more about hydraulic release bearings and how to properly install them by reading our tech article. How to Install a Hydraulic Throwout Bearing.

  • GM Stock Clutch Hydraulic Throwout Bearing
    GM Stock Clutch Hydraulic Throwout Bearing
    x
                

    Stock clutch hydraulic throwout bearing for stock-style 3-speed and 4-speed Chevy clutches only. Install simply by replacing one bolt from the front of the transmission with one of the provided studs, then shim to fit. Use 3/4" bore master cylinder.

    This bearing is made much smaller than the racing version so that it will fit behind the "thicker" stock style clutches. This redesigned new housing is much cleaner as it has no boss on the body. Plus, this design also has a retainer on it to prevent over extension and seal damage.

    GM Stock Clutch Hydraulic Throwout Bearing Instructions (PDF)

    Learn more about hydraulic release bearings and how to properly install them by reading our tech article. How to Install a Hydraulic Throwout Bearing.

  • Ram Clutches 78125 Street Stock Hydraulic Throwout Bearing Only
    Ram Clutches 78125 Street Stock Hydraulic Throwout Bearing Only
    x
                

    Ram hydraulic bearings ease installations in vehicles with chassis constraints, and offer a smooth, lighter pedal effort.

    Includes:

    • (2) 1/8"NPT to AN3 adaptors
    • (1) AN3 to 1/8" female adaptor
    • (2) Anti-rotation studs
    • (1) 19" AN3 line
    • Shims

     

    Learn more about hydraulic release bearings and how to properly install them by reading our tech article. How to Install a Hydraulic Throwout Bearing.