Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"radiator hose kit" Page 1 of 2

  • Chrome Braided Hose Covering Kit
    Chrome Braided Hose Covering Kit
    x
                Over 20 feet of stainless steel braided hose cover with chrome plated hose end covers! 

    Easy to install! Easy to clean! Hi-tech detailing at an economy price. Each dress kit contains 3' of vacuum line, 4' of fuel line, 12' of heater hose, and an extra long 4-1/2' of radiator hose sleeving, and 4 shrink sleeves for vacuum lines, 4 fuel line fittings, 4 heater hose fittings, 2 fittings for upper radiator hose.

    Note: The covering is not the actual hose. 

  • Air Conditioning Kit w/ Condenser
    Air Conditioning Kit w/ Condenser
    x
                

    The days of riding around trying to look cool while sweating your butt off are gone! So is going to the junkyard and trying to find used parts to cobble up an a/c system. These kits have three dash vents and two defrost ducts and are engineered for 1930's coupes, pick-ups and smaller cars.

    These are designed with both the a/c evaporator and heater core in one unit which helps keep size and installation time down. They fit under the dash just like a new car and allow disassembly without removing the unit from the car.

    They include dash louvers, defrost louvers, switch panel, a/c hose kit, dryer with switch, Sanden 508 compressor  with V-belt pulley, and evaporator/heater assembly. They are available with or without condenser and standard finish or deluxe polished aluminum compressor.

    Hoses will need to be crimped by your local shop. R134a Freon required, but not supplied. Compressor brackets and heater hoses sold separately.

    Instructions (PDF) 

  • Flexible Radiator Hose Kit, 24 Inch
    From: $69.99
    Product Rating: 4.00 Stars
    Flexible Radiator Hose Kit, 24 Inch
    x
                

    Flexible stainless steel radiator hose will fit all applications. Unique design is non-corrosive and dissipates heat. Choose from chrome aluminum or polished aluminum ends.

    Kit includes:

    • One 1-3/4" diameter hose
    • Two aluminum end cap covers
    • Two rubber coolant hose sleeve adapters, 1-3/4" I.D.
    • Two 1-1/4" I.D. rubber reducers
    • Two 1-1/2" I.D. rubber reducers
    • Four hose clamps
  • 1949-1953 Flathead Ford V8 Radiator Hose Dress-Up Kits
    1949-1953 Flathead Ford V8 Radiator Hose Dress-Up Kits
    x
                

    Dress up the flathead in your postwar Ford or Mercury by replacing the original cylinder head-to-radiator hoses with these stainless or chrome-plated pieces. Each radiator hose dress kit replaces both upper hoses on a flathead Ford V8 and includes two chrome or stainless tubes, four rubber connector hoses, and eight stainless steel hose clamps.

    • Simple way to add some sparkle to your engine compartment
    • Available with polished stainless steel or quality chrome-plated tubes
    • Strong three-ply rubber hose connectors
    • Attractive stainless steel hose clamps
  • 1937-39 and 1942-48 Flathead Ford V8 Radiator Hose Kits
    1937-39 and 1942-48 Flathead Ford V8 Radiator Hose Kits
    x
                

    Show some style! Add some sparkle! Replace your 59A flathead's original cylinder head-to-radiator hoses with these polished stainless or chrome-plated pieces. Each kit replaces both upper hoses for a flathead Ford V8 and includes two chrome or stainless tubes, four 3-ply rubber connector hoses, and eight hose clamps.

  • 1939-1941 Flathead Ford V8 Radiator Hose Dress-Up Kits
    1939-1941 Flathead Ford V8 Radiator Hose Dress-Up Kits
    x
                

    Dress up your flathead by replacing your original cylinder head-to-radiator hoses with these stainless or chrome plated pieces. Each radiator hose dress kit replaces both upper hoses on a flathead Ford V8 and includes two chrome or stainless tubes, four rubber connector hoses, and eight stainless steel hose clamps. This is a quick and easy way to add some sparkle to your engine compartment.

    • Available with polished stainless steel or quality chrome-plated tubes
    • Strong three-ply rubber hose connectors
    • Attractive stainless steel hose clamps
    • Easy installation
  • Air Conditioning Kit w/o Condenser
    Air Conditioning Kit w/o Condenser
    x
                

    The days of riding around trying to look cool while sweating your butt off are gone! So is going to the junkyard and trying to find used parts to cobble up an a/c system. These kits have three dash vents and two defrost ducts and are engineered for 1930's coupes, pickups and smaller cars.

    These are designed with both the a/c evaporator and heater core in one unit which helps keep size and installation time down. They fit under the dash just like a new car and allow disassembly without removing the unit from the car.

    They include dash louvers, defrost louvers, switch panel, a/c hose kit, dryer with switch, compressor with V-belt pulley, and evaporator/heater assembly. They are available with or without condenser and standard finish or deluxe polished aluminum compressor.

    Hoses will need to be crimped by your local shop. R134a Freon required, but not supplied. Compressor brackets and heater hoses sold separately.

    428-100 Instructions (PDF)

  • Speedway C&R Heater Hose Kit
    $149.99
    Speedway C&R Heater Hose Kit
    x
                

    This kit is used for plumbing a C&R engine heater to the race car.  Comes with 10 feet of Black Aeroquip hose with brass push-on ends.  Features 2 female steel quick releases for the hoses and 2 aluminum mail quick releases for the car.

    • Plumbing a C&R engine heater to race car
    • 10 feet of Black Aeroquip hose
    • Brass push-on end fittings
    • (2) female steel quick releases for the hoses
    • (2) aluminum mail quick releases for the car
  • Diamond AC Bulkhead Plates with Fittings
    Diamond AC Bulkhead Plates with Fittings
    x
                

    When you have to run air conditioning and heater hoses through your firewall, the only way to make it look good is to use bulkhead plates. We make it easy for you to order because we include the four heater hose fittings and two a/c hose fittings required to finish the job.

    Kit includes:

    • (1) straight fitting for -6 AC hose
    • (1) 90° fitting for -6 AC hose
    • (1) straight fitting for -10 AC hose
    • (1) 90° fitting for -10 AC hose
    • (2) straight fittings for 5/8" heater hose
    • (2) 90° fittings for 5/8" heater hose
    • (1) bulkhead plate, 2-1/2" x 4-1/2"

    You will need to have the fittings crimped on the hoses by your local shop.

  • Hose Adapter for Steel Flexible Radiator Hose Kit to 1-1/4 Inch Outlet
    Hose Adapter for Steel Flexible Radiator Hose Kit to 1-1/4 Inch Outlet
    x
                

    A 1-1/4" radiator rubber hose sleeve adapter for use with flexible steel radiator hoses. Fits hose to 1-1/4" outlet.

    • Adapter O.D.: 1-3/4"
    • Adapter I.d.: 1-1/4"
    • Adapter Length: 1-1/2"

    Note: This coolant hose adapter will generally be used for replacement as our flexible hose kits already include (two) each.

  • Flexible Radiator Hose Kit, 12 Inch
    From: $59.99
    Product Rating: 5.00 Stars
    Flexible Radiator Hose Kit, 12 Inch
    x
                

    Flexible stainless steel hose will fit all applications. Unique design is non-corrosive and dissipates heat. Choose from chrome aluminum or polished aluminum ends.

    Kits includes:

    • One 1-3/4" diameter hose
    • Two aluminum end cap covers
    • Two rubber coolant hose sleeve adapters, 1-3/4" I.D.
    • Two 1-1/4" I.D. rubber reducers
    • Two 1-1/2" I.D. rubber reducers
    • Four hose clamps
  • Silicone/Aluminum Radiator Hose Kit
    Silicone/Aluminum Radiator Hose Kit
    x
                

    Trying to find hoses for that custom project can be a challenge, so we now offer this complete starter kit that can be used in many applications.

    Kit includes:

    • 1-3/4" ID 90 degree hose, 13.75" long (measured on outside of bend)
    • 1-1/2" ID 90 degree hose, 13.50" long
    • 1-1/2" ID 45 degree hose, 9.25" long
    • 1-3/4" ID straight hose, 6" long
    • 1-3/4" ID 45 degree aluminum tube, 12" long
    • 1-1/2" ID straight aluminum tube, 6" long
  • Hot Products Engineering HPE-HK-1.5 Hot Head Engine Heater Hose Kit
    Hot Products Engineering HPE-HK-1.5 Hot Head Engine Heater Hose Kit
    x
                Two hoses that aid the installation of integrating check valves. Comes with four high-quality hose clamps.  1-1/2" for standard applications.
            
  • Heater Hose Kits
    From: $99.99
    Product Rating: 5.00 Stars
    Heater Hose Kits
    x
                

    Kit includes two 44" lengths of hose and four ends. Available in polished stainless steel or chrome steel.

    • 3/4" hose O.D.
    • 5/8" hose I.D.
  • Flexible Radiator Hose Kit, 36 Inch
    From: $79.99
    Product Rating: 5.00 Stars
    Flexible Radiator Hose Kit, 36 Inch
    x
                

    Flexible stainless steel hose will fit all applications. Unique design is non-corrosive and dissipates heat. Choose from chrome aluminum or polished aluminum ends.

    Kits includes:

    • One 1-3/4" diameter hose
    • Two aluminum end cap covers
    • Two rubber coolant hose sleeve adapters, 1-3/4" I.D.
    • Two 1-1/4" I.D. rubber reducers
    • Two 1-1/2" I.D. rubber reducers
    • Four hose clamps
  • Hose Adapter for Steel Flexible Radiator Hose Kit to 2 Inch Outlet
    Hose Adapter for Steel Flexible Radiator Hose Kit to 2 Inch Outlet
    x
                A 2" radiator rubber hose sleeve adapter with 1-1/2" reducer and 2 hose clamps. This coolant hose adapter is for use with flexible steel radiator hoses. Fits hose to 2" outlet.
            
  • Radiator Neck Kit
    $19.99
    Product Rating: 4.00 Stars
    Radiator Neck Kit
    x
                

    These aluminum hose neck kits make it easy to rebuild your aluminum radiator. Includes a 1-1/2" and a 1-3/4" neck, weld-in 1/4" NPT fitting, hose barb and petcock. Fabrication and aluminum welding required.

    • 1-3/4" tube = 3" long
    • 1-1/2" tube = 2-1/2" long
  • AFCO High Performance Radiator Hose Kit
    AFCO High Performance Radiator Hose Kit
    x
                

    High-temp silicone hose and aluminum coolant hose adapters allow you to customize your cooling system.

    Includes:

    • (1) - 1-3/4"(I.D.) x 13.50" 90 deg. silicone elbow (measured from the outside of the bend)
    • (1) - 1-1/2"(I.D.) x 13.25" 90 deg. silicone elbow (measured from the outside of the bend)
    • (1) - 1-1/2"(I.D.) x 9.25"  45 deg. silicone elbow (measured from the outside of the bend)
    • (1) - 1-3/4"(I.D.) x 6"  Straight silicone
    • (1) - 1-3/4"(O.D.) x 12" 45 deg. aluminum tube (measured from the outside of the bend)
    • (1) - 1-1/2"(O.D.) x 6"  Straight aluminum tube
  • Gotta Show 231104 Ford Transmission Cooler Line Kit
    Gotta Show 231104 Ford Transmission Cooler Line Kit
    x
                

    These kits make it easy to plumb your transmission to your radiator or external transmission cooler. Hose uses aircraft quality TEFLON® inner liner for high temperature and abrasion resistance.

    • 11 ft. braided stainless steel hose with AN 6 female ends
    • Two metal lines to connect to your transmission
    • Two AN 6 female fittings
    • The steel lines have AN6 and 1/4' NPT fittings

    Note: You will need to buy the right adapter fittings to your radiator or transmission cooler.

    Instructions (PDF)

  • Square AC Bulkhead Plates with Fittings
    Square AC Bulkhead Plates with Fittings
    x
                

    When you have to run air conditioning and heater hoses through your firewall, the only way to make it look good is to use bulkhead plates. We make it easy for you to order because we include the four heater hose fittings and two a/c hose fittings required to finish the job.

    Kit includes:

    • (1) straight fitting for -6 AC hose
    • (1) 90° fitting for -6 AC hose
    • (1) straight fitting for -10 AC hose
    • (1) 90° fitting for -10 AC hose
    • (2) straight fittings for 5/8" heater hose
    • (2) 90° fittings for 5/8" heater hose
    • (1) square bulkhead plate, 3" x 3"

    You will need to have the fittings crimped on the hoses by your local shop. 

  • Inline AC Bulkhead Plates with Fittings
    Inline AC Bulkhead Plates with Fittings
    x
                

    When you have to run air conditioning and heater hoses through your firewall, the only way to make it look good is to use bulkhead plates. We make it easy for you to order because we include the four heater hose fittings and two a/c hose fittings required to finish the job.

    Kit includes:

    • (1) straight fitting for -6 AC hose
    • (1) 90° fitting for -6 AC hose
    • (1) straight fitting for -10 AC hose
    • (1) 90° fitting for -10 AC hose
    • (2) straight fittings for 5/8" heater hose
    • (2) 90° fittings for 5/8" heater hose
    • (1) bulkhead plate, 5-1/2" long x 1-1/4" wide

    You will need to have the fittings crimped on the hoses by your local shop.

  • Stainless Braided Radiator Hose Cover, 1-1/4 to 1-5/8 Inch O.D.
    Stainless Braided Radiator Hose Cover, 1-1/4 to 1-5/8 Inch O.D.
    x
                Use in conjunction with Tube Seal™ Hose Ends.  Duplicates the appearance of far more expensive stainless steel braided  hose and fittings. Fits over 1-1/4" - 1-5/8" O.D. hose. 

    Sold in 6 ft. sleeves.

    Note: Coverage may vary on diameter on hose. 6 ft. of sleeving typically covers 4 ft of hose.
  • U-Weld-It Custom Aluminum Radiator Kit, 26 x 19 Inch
    New
    U-Weld-It Custom Aluminum Radiator Kit, 26 x 19 Inch
    x
                
    Build and design your own radiator with these aluminum u-weld-it kits.  They come with everything you need to create a custom radiator to fit your specific application.  These radiators can be used as either a cross-flow or down-flow.
    • Overall Dimensions:  25-5/8" x 19-9/16" x 3-1/8"
    • Core Dimensions:  21" x 18" x 2-1/4"

    Kit Includes:

    • (1) 1-1/2" Hose connection
    • (1) 1-3/4" Hose connection
    • (1) Billet Aluminum filler neck
    • (1) Overflow tube
    • (1) Weld-on Bung
    • (1) Draincock

    Note: This kit requires aluminum welding and fabrication.  Kit is sold as an unfinished product.  Standard warranties DO NOT APPLY.

  • U-Weld-It Custom Aluminum Radiator Kit, 31 x 19 Inch
    New
    U-Weld-It Custom Aluminum Radiator Kit, 31 x 19 Inch
    x
                

    Build and design your own radiator with these aluminum u-weld-it kits.  They come with everything you need to create a custom radiator to fit your specific application.  These radiators can be used as either a cross-flow or down-flow.

    • Overall Dimensions:  30-7/8" x 19-9/16" x 3-1/8"
    • Core Dimensions:  26-1/4" x 18" x 2-1/4"

    Kit Includes:

    • (1) 1-1/2" Hose connection
    • (1) 1-3/4" Hose connection
    • (1) Billet Aluminum filler neck
    • (1) Overflow tube
    • (1) Weld-on Bung
    • (1) Draincock

    Note: This kit requires aluminum welding and fabrication.  Kit is sold as an unfinished product.  Standard warranties DO NOT APPLY.

  • U-Weld-It Custom Aluminum Radiator Kit, 22 x 19 Inch
    New
    U-Weld-It Custom Aluminum Radiator Kit, 22 x 19 Inch
    x
                

    Build and design your own radiator with these aluminum u-weld-it kits.  They come with everything you need to create a custom radiator to fit your specific application.  These radiators can be used as either a cross-flow or down-flow.

    • Overall Dimensions:  21-5/8" x 19-9/16" x 3-1/8"
    • Core Dimensions:  17" x 18" x 2-1/4"

    Kit Includes:

    • (1) 1-1/2" Hose connection
    • (1) 1-3/4" Hose connection
    • (1) Billet Aluminum filler neck
    • (1) Overflow tube
    • (1) Weld-on Bung
    • (1) Draincock

    Note: This kit requires aluminum welding and fabrication.  Kit is sold as an unfinished product.  Standard warranties DO NOT APPLY.

  • U-Weld-It Custom Aluminum Radiator Kit, 24 x 19 Inch
    New
    U-Weld-It Custom Aluminum Radiator Kit, 24 x 19 Inch
    x
                

    Build and design your own radiator with these aluminum u-weld-it kits.  They come with everything you need to create a custom radiator to fit your specific application.  These radiators can be used as either a cross-flow or down-flow.

    • Overall Dimensions:  23-1/8" x 19-9/16" x 3-1/8"
    • Core Dimensions:  19-3/16" x 18" x 2-1/4"

    Kit Includes:

    • (1) 1-1/2" Hose connection
    • (1) 1-3/4" Hose connection
    • (1) Billet Aluminum filler neck
    • (1) Overflow tube
    • (1) Weld-on Bung
    • (1) Draincock

    Note: This kit requires aluminum welding and fabrication.  Kit is sold as an unfinished product.  Standard warranties DO NOT APPLY.

  • U-Weld-It Custom Aluminum Radiator Kit, 28 x 19 Inch
    New
    U-Weld-It Custom Aluminum Radiator Kit, 28 x 19 Inch
    x
                

    Build and design your own radiator with these aluminum u-weld-it kits.  They come with everything you need to create a custom radiator to fit your specific application.  These radiators can be used as either a cross-flow or down-flow.

    • Overall Dimensions:  27-1/8" x 19-9/16" x 3-1/8"
    • Core Dimensions:  22-1/2" x 18" x 2-1/4"

    Kit Includes:

    • (1) 1-1/2" Hose connection
    • (1) 1-3/4" Hose connection
    • (1) Billet Aluminum filler neck
    • (1) Overflow tube
    • (1) Weld-on Bung
    • (1) Draincock

    Note: This kit requires aluminum welding and fabrication.  Kit is sold as an unfinished product.  Standard warranties DO NOT APPLY.

  • Billet Specialties 67825 Aluminum Hose Clamp, 1-1/2 Inch Rubber Hose
    Billet Specialties 67825 Aluminum Hose Clamp, 1-1/2 Inch Rubber Hose
    x
                

    Billet Specialties has the answer for unsightly hose clamps and loud anodized colors - polished billet hose ends! Provides an excellent finishing touch for your radiator hose dress kit. For use with 1-1/2" rubber radiator hose.

    • Precision machined from 6061-T6 billet aluminum
    • Mirror polish finish
    • Hose clamp included
    • Sold individually
  • Billet Specialties 67925 Aluminum Hose Clamp, 1-3/4 Inch Rubber Hose
    Billet Specialties 67925 Aluminum Hose Clamp, 1-3/4 Inch Rubber Hose
    x
                

    Billet Specialties has the answer for unsightly hose clamps and loud anodized colors - polished billet hose ends! Provides an excellent finishing touch to your radiator hose dress kit. For use with 1-3/4" rubber radiator hose.

    • Precision machined from 6061-T6 billet aluminum
    • Mirror polish finish
    • Hose clamp included
    • Sold individually
  • Gotta Show 231101 GM Transmission Cooler Line Kit
    Gotta Show 231101 GM Transmission Cooler Line Kit
    x
                

    These kits make it easy to plumb your transmission to your radiator or external transmission cooler. Hose uses aircraft quality Teflon® inner liner for high temperature and abrasion resistance.

    • 11 ft. braided stainless steel hose with AN -6 female ends
    • Two metal lines to connect to your transmission
    • Two AN -6 female fittings
    • The steel lines have AN6 and 1/4" NPT fittings

    Note: You will need to buy the right adapter fittings to your radiator or transmission cooler.

    910-31101 Instructions (PDF)

  • Standard Transmission Cooler
    $19.99
    Standard Transmission Cooler
    x
                

    Use this 4-pass standard transmssion cooler in place of radiator lower tank cooler, or as a supplement to it.

    • 5" Tall x 16-3/4" Wide x 3/4" Thick
    • Includes 4 ft. rubber hose (3/8" I.D.), 4 stainless hose clamps and nylon mounting kit

    Transmission Cooler Installation Instructions (PDF)

  • Speedway Small Block Chevy Cooling Unit
    Speedway Small Block Chevy Cooling Unit
    x
                This cooling unit improves coolant flow and reduces hot spots in your  small block Chevy. Fittings install in each head adjacent to the  crossover and connect to thermostat housing. Suitable for use with  all aluminum and cast iron heads. Contains spacer/adapter, two 18"  high-pressure hoses, (4) 1/8" NPT x AN 4
    fittings
    , gaskets and hardware.
  • Vintage Air 981412 Gen II Compac Universal Heat and Air Kit
    New
    Vintage Air 981412 Gen II Compac Universal Heat and Air Kit
    x
                Trust your heating and cooling needs to Vintage Air!  These universal heater/air conditioning kits are perfect for upgrading the outdated system in your classic ride or just adding a comfort necessity that was once not an option for your automobile.  Regardless of the reason, these redesigned kits are sure to satisfy your needs, with all necessary components and detailed instructions included.  Made in the USA.

    Includes:

    • Evaporator
    • Controller         
    • 2-Louvers   
    • Compressor  (No compressor bracket)
    • Hose Kit w/drier
    • Safety switch
    • Detailed instructions

    Note:  The Gen II Compac Kit is sold without an A/C condenser. 

  • Hot Products 2340 Hot Head Jr. Engine Heater 3/4 Hose -12 Check Valve
    Hot Products 2340 Hot Head Jr. Engine Heater 3/4 Hose -12 Check Valve
    x
                

    Built specifically for multi cylinder engines with displacements at or below 1200cc. Use as a pre-heater or for post race cool down to eliminate latent heat build-up.

    • Features 6’ 3/4 hose and 12 check valve only
    • heater not included
  • Vintage Air Gen II Universal Heat and Air Kit with Vertical Condenser
    New
    Vintage Air Gen II Universal Heat and Air Kit with Vertical Condenser
    x
                Trust your heating and cooling needs to Vintage Air!  These universal  heater/air conditioning kits are perfect for upgrading the outdated  system in your classic ride or just adding a comfort necessity that was  once not an option for your automobile.  Regardless of the reason, these  redesigned kits are sure to satisfy your needs, with all necessary  components and detailed instructions included.  Made in the USA.

    Includes:

    • Evaporator
    • Controller         
    • 2-Louvers   
    • Compressor  (No compressor bracket)
    • Vertical A/C condenser (for early styled cars)
    • Hose Kit w/drier
    • Safety switch
    • Detailed instructions
  • Vintage Air Gen II Universal Heat and Air Kit with Horizontal Condenser
    New
    Vintage Air Gen II Universal Heat and Air Kit with Horizontal Condenser
    x
                Trust your heating and cooling needs to Vintage Air!  These universal   heater/air conditioning kits are perfect for upgrading the outdated   system in your classic ride or just adding a comfort necessity that was   once not an option for your automobile.  Regardless of the reason,  these  redesigned kits are sure to satisfy your needs, with all  necessary  components and detailed instructions included.  Made in the  USA.

    Includes:

    • Evaporator
    • Controller         
    • 2-Louvers   
    • Compressor  (No compressor bracket)
    • Horizontal A/C condenser (for later styled cars)
    • Hose Kit w/drier
    • Safety switch
    • Detailed instructions
  • FSR Engine Mount Radiator Kit, Double Row Core
    FSR Engine Mount Radiator Kit, Double Row Core
    x
                

    Change engines with ease by keeping the cooling system completely intact. Utilized by many professional teams, this double pass radiator comes with mounting brackets and hose to upgrade your engine. Side inlets are female -10 AN O-ring ports.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.   

  • Professional Products 70026 Powerjection III Fuel Injection System
    Professional Products 70026 Powerjection III Fuel Injection System
    x
                

    This complete stand alone plain electronic fuel injection system supports up to 500 horsepower and is by far the simplest and cleanest aftermarket EFI system available. It's also the easiest to install and tune. The "Adaptive Learning" feature eliminates the necessity for laptop programming and tuning, except on the most radical engines. By "cleanest", we mean it has minimal wiring showing, so for those street rod, street machine, and custom car enthusiasts who object to other EFI systems because of all the engine clutter with wires running everywhere, this is the system they have been waiting for. 

    It utilizes a wideband O2 sensor, a feature missing from many competitive units. It also has a 2.5 BAR MAP sensor which means you can run up to 20 PSI of boost if you have a supercharger or turbocharger. The fuel pump comes with a combination heat sink and mounting bracket. The EMS (engine management system) mounts directly on the throttle body eliminating a major portion of the wiring required. This means you do not have to cut a hole into the firewall. Additionally the MAP sensor is packaged into the throttle body which means one less component cluttering up your firewall and no vacuum hose needed to run from the firewall to the manifold. 

    Click HERE to see what is all included! (Link)

  • 6 Inch Chopped 1932 Lo-Boy Aluminum Radiator
    6 Inch Chopped 1932 Lo-Boy Aluminum Radiator
    x
                

    Latest high efficiency core designed with Chevy-style outlets. Perfect fit with Lo-Boy grille shell and grille insert. Super duty, all aluminum construction is ideal for high compression or supercharged engines.

    • 2 rows of 1" furnace brazed cores
    • TIG welded brackets
    • Internal automatic transmission cooler
    • Height:  21"
    • Width:  17-1/2" w/o brackets
    • Core:  16" W x 16" T
    • Thickness @ Core:  3"
    • Thickness @ Top Tank:  4"
    • Trans Cooler Ports:  1/4" NPT
    • Capacity:  1 gallon
    • passenger side lower hose (1-3/4"), driver side upper hose (1-1/2")

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • 1966-86 Small Block Chevy Water Neck Bolt Kit
    1966-86 Small Block Chevy Water Neck Bolt Kit
    x
                A bolt kit for a 1966-1986 S/B Chevy water neck. All feature that unique King Chrome premium chrome plating. Fits Small Block Chevy (SBC).
            
Goto Previous PagePrevious Page
1 2