Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"radiator hose degree" Page 1 of 2

  • Air Conditioning Kit w/ Condenser
    Air Conditioning Kit w/ Condenser
    x
                

    The days of riding around trying to look cool while sweating your butt off are gone! So is going to the junkyard and trying to find used parts to cobble up an a/c system. These kits have three dash vents and two defrost ducts and are engineered for 1930's coupes, pick-ups and smaller cars.

    These are designed with both the a/c evaporator and heater core in one unit which helps keep size and installation time down. They fit under the dash just like a new car and allow disassembly without removing the unit from the car.

    They include dash louvers, defrost louvers, switch panel, a/c hose kit, dryer with switch, Sanden 508 compressor  with V-belt pulley, and evaporator/heater assembly. They are available with or without condenser and standard finish or deluxe polished aluminum compressor.

    Hoses will need to be crimped by your local shop. R134a Freon required, but not supplied. Compressor brackets and heater hoses sold separately.

    Instructions (PDF) 

  • Aluminum 90 Degree Hose Connectors
    $16.99
    $20.00
    Product Rating: 5.00 Stars
    Aluminum 90 Degree Hose Connectors
    x
                

    These 90° bend aluminum tubes allow you to build custom radiator/coolant hoses. Each tube features a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

    Choose hose diameter needed.

  • 90 Degree Silicone Radiator Hoses
    90 Degree Silicone Radiator Hoses
    x
                

    These 6" long silicone radiator/coolant hoses can be cut to length, allowing you to build just what you need. This 3 layer, reinforced silicone material exceeds SAE standards and is designed for todays high temp, high pressure cooling systems (-100ºF to +380ºF rated).

    Measures 12" along outermost edge. Choose hose diameter (I.D.) needed.

     

  • 45 Degree Silicone Radiator Hoses
    45 Degree Silicone Radiator Hoses
    x
                

    These 45° bend silicone radiator/coolant hoses can be cut to length, allowing you to build just what you need. This 3 layer, reinforced silicone material exceeds SAE standards and is designed for todays high temp, high pressure cooling systems (-100ºF to +380ºF rated).

    Choose hose diameter (I.D.) needed.

  • Chevy 45 Degree Pivoting Aluminum Water Neck
    Chevy 45 Degree Pivoting Aluminum Water Neck
    x
                

    Pivoting water neck is die-cast, polished aluminum. This O-ring sealed water neck rises at a 45° angle and can be rotated for best possible radiator hose access. Fits all Chevy V8's 1955-86 and accepts normal GM thermostats and 1-1⁄2" I.D. hoses. Includes hardware.

    Bolt hole dimension is approximately 3-1/4" center to center.

  • 90 Degree Crimp-On O-Ring Heater Hose Fitting, -10 AN
    90 Degree Crimp-On O-Ring Heater Hose Fitting, -10 AN
    x
                

    These premium -10 size (7/8" x 14 TPI) crimp-on hose fittings feature O-ring seals and a 90 degree bend. Ideal for use with heater bulkhead plates.

    Note: Will need to be crimped by your local shop. 

  • AFCO 80312-15 Chevy Aluminum Thermostat Housing, 15 Degree Neck
    AFCO 80312-15 Chevy Aluminum Thermostat Housing, 15 Degree Neck
    x
                

    These thermostat housings are die-cast, polished aluminum. The O-ring sealed water neck rises at a 15° angle and can be rotated 360° for best possible radiator hose access. Includes hardware. 

    Fits all Chevy V8's 1955-86, and accepts normal GM thermostats and 1-1⁄2" I.D. hoses.

  • AFCO Silicone Radiator Hoses, 90 Degree, 12 Inch Length
    AFCO Silicone Radiator Hoses, 90 Degree, 12 Inch Length
    x
                
    • High-temp fiberglass reinforced silicone hose
    • Allows you to customize your cooling system
    • Choose 1-1/4”, 1-1/2” or 1-3/4” O.D.
  • AFCO Silicone Radiator Hoses, 45 Degree, 12 Inch Length
    AFCO Silicone Radiator Hoses, 45 Degree, 12 Inch Length
    x
                
    • High-temp fiberglass reinforced silicone hose
    • Allows you to customize your cooling system
    • Choose 1-1/4”, 1-1/2” or 1-3/4” O.D.
  • Chrome 90 Degree Heater Hose Fitting, 5/8 Inch Hose
    Chrome 90 Degree Heater Hose Fitting, 5/8 Inch Hose
    x
                

    Boy these fittings are hard to find! 90° style for or 5/8" hose. 1/2" NPT thread. Can be used for intake and water pump.

  • Air Conditioning Kit w/o Condenser
    Air Conditioning Kit w/o Condenser
    x
                

    The days of riding around trying to look cool while sweating your butt off are gone! So is going to the junkyard and trying to find used parts to cobble up an a/c system. These kits have three dash vents and two defrost ducts and are engineered for 1930's coupes, pickups and smaller cars.

    These are designed with both the a/c evaporator and heater core in one unit which helps keep size and installation time down. They fit under the dash just like a new car and allow disassembly without removing the unit from the car.

    They include dash louvers, defrost louvers, switch panel, a/c hose kit, dryer with switch, compressor with V-belt pulley, and evaporator/heater assembly. They are available with or without condenser and standard finish or deluxe polished aluminum compressor.

    Hoses will need to be crimped by your local shop. R134a Freon required, but not supplied. Compressor brackets and heater hoses sold separately.

    428-100 Instructions (PDF)

  • Aluminum 135 Degree Radiator Hose Connectors
    Aluminum 135 Degree Radiator Hose Connectors
    x
                

    These 135° bend aluminum tubes allow you to build custom radiator/coolant hoses. Each tube features a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

  • Steel 135 Degree Radiator Hose Connectors
    Steel 135 Degree Radiator Hose Connectors
    x
                

    These 135° bend steel tubes allow you to build custom radiator/coolant hoses. Each tube features a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

  • Chevy 90 Degree Pivoting Aluminum Water Neck
    Chevy 90 Degree Pivoting Aluminum Water Neck
    x
                

    Pivoting water neck is die-cast, polished aluminum. The O-ring sealed water neck rises at a 90° angle and can be rotated for best possible radiator hose access. Fits all Chevy V8's 1955-86, and accepts normal GM thermostats and 1-1/2" I.D. hoses. Includes hardware.

    Bolt hole dimension is approximately 3-1/4" center to center. 

  • AFCO Chevy Aluminum Thermostat Housing, 45 Degree Neck
    AFCO Chevy Aluminum Thermostat Housing, 45 Degree Neck
    x
                

    These thermostat housings are die-cast, polished aluminum. The O-ring sealed water neck rises at a 45° angle and can be rotated 360° for best possible radiator hose access. Includes hardware. 

    Fits all Chevy V8's 1955-86, and accepts normal GM thermostats and 1-1⁄2" I.D. hoses.

  • Silicone/Aluminum Radiator Hose Kit
    Silicone/Aluminum Radiator Hose Kit
    x
                

    Trying to find hoses for that custom project can be a challenge, so we now offer this complete starter kit that can be used in many applications.

    Kit includes:

    • 1-3/4" ID 90 degree hose, 13.75" long (measured on outside of bend)
    • 1-1/2" ID 90 degree hose, 13.50" long
    • 1-1/2" ID 45 degree hose, 9.25" long
    • 1-3/4" ID straight hose, 6" long
    • 1-3/4" ID 45 degree aluminum tube, 12" long
    • 1-1/2" ID straight aluminum tube, 6" long
  • Aluminum 105 Degree Hose Connectors
    $16.99
    $20.00
    Product Rating: 5.00 Stars
    Aluminum 105 Degree Hose Connectors
    x
                

    These 105° bend aluminum tubes allow you to build custom radiator/coolant hoses. Each tube features a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

  • Steel 90 Degree Hose Connectors
    Steel 90 Degree Hose Connectors
    x
                

    These 90° bend steel tubes allow you to build custom radiator/coolant hoses. Each tube features a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

    Choose hose diameter (I.D.) needed.

  • Steel 105 Degree Hose Connectors
    Steel 105 Degree Hose Connectors
    x
                

    These 105° bend steel tubes allow you to build custom radiator/coolant hoses. Each tube features a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

  • Chrome 90 Degree Heater Hose Fitting, 3/4 Inch Hose
    Chrome 90 Degree Heater Hose Fitting, 3/4 Inch Hose
    x
                

    Boy these fittings are hard to find! 90° style for 3/4" hose. 1/2" NPT thread. Can be used for intake and water pump.

  • 1939-1941 Flathead Ford V8 Radiator Hose Dress-Up Kits
    1939-1941 Flathead Ford V8 Radiator Hose Dress-Up Kits
    x
                

    Dress up your flathead by replacing your original cylinder head-to-radiator hoses with these stainless or chrome plated pieces. Each radiator hose dress kit replaces both upper hoses on a flathead Ford V8 and includes two chrome or stainless tubes, four rubber connector hoses, and eight stainless steel hose clamps. This is a quick and easy way to add some sparkle to your engine compartment.

    • Available with polished stainless steel or quality chrome-plated tubes
    • Strong three-ply rubber hose connectors
    • Attractive stainless steel hose clamps
    • Easy installation
  • Aeroquip FBU1000 Starlite Hose, -10 AN, 9/16 Inch
    Aeroquip FBU1000 Starlite Hose, -10 AN, 9/16 Inch
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    • -10 AN - 9/16"
    • Up to 45% lighter than stainless steel braided hose
    • Working temperature is -45 Degree F to +300 Degree F
    • Can be used with either crimp style or reusable hose fittings

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • 1955-1956 Chevy Car Heater Core
    1955-1956 Chevy Car Heater Core
    x
                

    These are a 100% new, factory replacement Tri-Five heater core. Not a marginal recore like others sell. For '55-'56 Chevrolet cars without factory air conditioning. We also recommend the mounting plate, which is normally rusted beyond use.

    Note: General Motors produced two different style heater cores for these vehicles. The heater cores we carry are a reproduction of the "deluxe" model, not the "standard."

  • 2.3 Ford Water Neck
    $39.99
    Product Rating: 5.00 Stars
    2.3 Ford Water Neck
    x
                

    Replace that cheap, die-cast water neck with this billet aluminum beauty. It has an extra thick flange to ensure sealing and includes a restrictor to slow down water flow if needed. Accepts standard radiator hose.

    • O.D. of the end the hose slides over is 1.328"
    • O.D. of the neck where the hose clamps is 1.22"
    • Machined area for thermostat is 1-11/16” (common 1-5/8” thermostat)
    • Comes with restrictor washer
  • 180 Degree High Flow Thermostat
    $14.99
    $15.99
    Product Rating: 4.67 Stars
    180 Degree High Flow Thermostat
    x
                

    Speedway takes a quality Robert Shaw high flow 180° thermostat, then modifies it to function properly in high RPM, high flow applications. They feature a balanced sleeve design and are strongly recommended for any performance application.  Fits most domestic applications.

    • 2-1/8" diameter 
    • High flow 180° thermostat
    • Balanced sleeve design
    • Recommended for any performance application
    • Fits most domestic applications

    Learn more about the importance of the thermostat with cooling systems and how they work by reading our tech article. Cooling System Principles.

  • Chrome Water Neck Housing for 1955-65 Small Block Chevy V8, O-Ring Style
    Chrome Water Neck Housing for 1955-65 Small Block Chevy V8, O-Ring Style
    x
                

    These beautifully chrome plated water necks easily install in place of OEM water neck housing.  They use an O-ring for a perfect seal and are supplied with all necessary bolts and seals.  These water necks are designed to fit 1955-1965 Small Block Chevy V-8, stock 1964 Chevy II, and 1956-1963 stock Corvettes. They are angled 45 degrees and straight forward.

    • Chrome plated
    • Easily install in place of OEM
    • 45 degree angle, straight forward
    • O-ring for a perfect seal
    • O-ring and stainless steel bolts included
    • Fit: Small Block Chevy V-8:
      • 1955-1965
      • stock 1964 Chevy II
      • 1956-1963 stock Corvettes

     

  • 1949-1953 Flathead Ford V8 Thermostat
    1949-1953 Flathead Ford V8 Thermostat
    x
                

    Don't let your old flathead boil over – keep it running cool with new thermostats from Speedway. These thermostats sit in the water outlets on the top of the head, with the hose coming down over the water outlets, holding the thermostats in place. Remember, every flathead needs two of these!

    • OEM replacement
    • Two thermostats required for each engine
    • Available in 160° F or 180° F
    • Fits 1949-1953 Ford and Mercury flathead V8s

    Learn more about the importance of the thermostat with cooling systems and how they work by reading our tech article. Cooling System Principles.

     

  • Male Steel 37 Degree AN Flare Weld Bung Fitting, -12 AN
    Male Steel 37 Degree AN Flare Weld Bung Fitting, -12 AN
    x
                

    We offer these premium-quality weld-in bungs for a variety of uses. They're CNC-machined from steel and are great for oil or fuel tanks, radiators, valve covers, manifolds, and rear axle housings. 

    Steel male 37° AN flare weld bung fitting

    • -12 AN
    • Steel

    Fitting Thread Application Chart (GIF)

  • Hot Head Aluminum Male Quick Release
    Hot Head Aluminum Male Quick Release
    x
                1/2" NPT fitting. Male end of the quick release. Prevents fluid loss. 250 PSI working pressure. -15 to +300 degrees F working temperature. Allows for quick disconnect from coolant lines.
            
  • Waterman 252900 Sprint Pump Swivel Flange
    Waterman 252900 Sprint Pump Swivel Flange
    x
                This Waterman Sprint Pump Swivel Flange allows 360 degree rotation of fuel pump for ease of removal or direction of fuel pump.
            
  • Garage Sale - Chevy 45 Degree Pivoting Aluminum Water Neck
    Garage Sale
    Garage Sale - Chevy 45 Degree Pivoting Aluminum Water Neck
    x
                

    This water neck is garage sale priced because it has some pits and scratches from shipping.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

    Pivoting water neck is die-cast, polished aluminum. This O-ring sealed water neck rises at a 45° angle and can be rotated for best possible radiator hose access. Fits all Chevy V8's 1955-86 and accepts normal GM thermostats and 1-1⁄2" I.D. hoses. Includes hardware.

    Bolt hole dimension is approximately 3-1/4" center to center.

  • Garage Sale - Chevy 90 Degree Pivoting Aluminum Water Neck
    Garage Sale
    Garage Sale - Chevy 90 Degree Pivoting Aluminum Water Neck
    x
                

    This water neck is garage sale priced because it has some scratched and scuffs from shipping.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

    Pivoting water neck is die-cast, polished aluminum. The O-ring sealed water neck rises at a 90° angle and can be rotated for best possible radiator hose access. Fits all Chevy V8's 1955-86, and accepts normal GM thermostats and 1-1/2" I.D. hoses. Includes hardware.

    Bolt hole dimension is approximately 3-1/4" center to center. 

  • Offenhauser 1949-53 Flathead Angled Water Neck
    Offenhauser 1949-53 Flathead Angled Water Neck
    x
                Replace your corroded or missing Flathead water neck with this high-quality  version. Made of cast aluminum for a good seal and longevity. 
    • Uses 1-1/4" hose
    • Includes bolts and gasket
    • Two required per engine
  • Chevy/Mopar Chrome Water Neck, Gasket Sealed
    Chevy/Mopar Chrome Water Neck, Gasket Sealed
    x
                These thermostat housings will fix your leak with a gasket seal design.  They feature a beautiful chrome finish and are designed as a universal application for most Chevy and Mopar engines with stock intake manifolds.  This design works with a Mopar thermostat only.  Late model Mopar style thermostats suggested.
    • Neck goes straight up, must use Mopar thermostat
    • Beautifully chrome plated
    • Uses gasket for a perfect seal
    • Center-to-center of mount bolts:  3-1/4"
    • Neck/hose size:  1-1/2"
    • Hardware included

    Water neck fits:

    • Chevy Small Block V8
    • Chevy 90 Degree V6
    • Late Mopar V8
  • Garage Sale - Starlite #6 Hose w/90 Degree Fittings
    Garage Sale
    Garage Sale - Starlite #6 Hose w/90 Degree Fittings
    x
                

    Aeroquip's incredible Startlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Startlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine. 

     

    This hose is garage sale priced because it has been pre-assembled.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • 1937-1948 Flathead Ford V8 Thermostat
    1937-1948 Flathead Ford V8 Thermostat
    x
                

    Don't let that flattie boil over – keep it running cool with new thermostats from Speedway. These thermostats sit in the water outlets on the top of the head, with the hose coming down over the water outlets, holding the thermostats in place. Remember, every Flathead needs two of these!

    • OEM replacement
    • Two thermostats required for each engine
    • Opens @ 180° F
    • Fits 1937-1947 Ford/Mercury flathead V8s in cars & trucks

    Learn more about the importance of the thermostat with cooling systems and how they work by reading our tech article. Cooling System Principles.

Goto Previous PagePrevious Page
1 2