Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"quick change rear axle gears" Page 1 of 3

  • Winters Performance SR2525 SR2980 56 Inch Quickchange Rear End, Plain
    Winters Performance SR2525 SR2980 56 Inch Quickchange Rear End, Plain
    x
                

    Winter's Championship rear end is available with either plain or fully polished housing, six-rib side bells and standard rear cover. Features a standard driveshaft yoke, heat treated lower shaft, 31-spline Winters Track posi differential, and a 4.12:1 ring and pinion.

    Housing ends are standard 3.15" big Ford and include 2.5" offset axles. Axles drilled for both 5 on 4-1/2" and 5 on 4-3/4" bolt patterns. Measures 56" from axle flange to axle flange and requires our part #91711 10-spline quick change gears.

    THIS ITEM SHIPS TRUCK FREIGHT

  • Pro-Eliminator/Winters Rear Cover Gasket, Heavy Duty w/ Steel Core
    Pro-Eliminator/Winters Rear Cover Gasket, Heavy Duty w/ Steel Core
    x
                

    Pro-Eliminator and Winters replacement gasket for Winters quick change rear ends. Available in heavy duty reuseable with a steel core.

    Speedway Motors has everyting you need to repair or upgrade your Winters quick change rearend. From center sections and gear sets to bearings, washers and O-Rings, we can help you get your rear back on the track!

    Winters Replacement Parts Figure (PDF)

    Pro Eliminator Rear End Diagram (GIF) 

     

  • Pro-Eliminator Rear End Replace Parts, Rear Bearing Internal Snap Ring
    Pro-Eliminator Rear End Replace Parts, Rear Bearing Internal Snap Ring
    x
                

    These Pro-Eliminator rear end replacement parts are in stock and ready to order.

    • Rear Bearing Internal Snap Ring

    Quick Change Gear Sets, part number 91711-..., which is #41 on the diagram link below, are located elsewhere on this website.

    Note: This part is for sale because we either do not carry this product anymore or never have carried this brand/style before. Damages will be noted if applicable.

     Pro Eliminator Rear End Diagram (GIF)

  • Speedway Tribute T-Bucket Quick Change Rear End Kit
    Speedway Tribute T-Bucket Quick Change Rear End Kit
    x
                Please view the product's page for more information
            
  • Pro-Eliminator Rear End Replace Parts, 1/4 Inch Diameter Steel Detent Ball
    Pro-Eliminator Rear End Replace Parts, 1/4 Inch Diameter Steel Detent Ball
    x
                

    These Pro-Eliminator rear end replacement parts are in stock and ready to order.

    • 1/4 Inch Diameter Steel Detent Ball

    Quick Change Gear Sets, part number 91711-..., which is #41 on the diagram link below, are located elsewhere on this website.

    Note: This part is for sale because we either do not carry this product anymore or never have carried this brand/style before. Damages will be noted if applicable.

     Pro Eliminator Rear End Diagram (GIF)

  • 1935-1948 Ford/Mercury High Speed Ring and Pinion Gear Set, 3.54 Gear Ratio
    1935-1948 Ford/Mercury High Speed Ring and Pinion Gear Set, 3.54 Gear Ratio
    x
                

    These fit 1935-1948 passenger cars or 1935-1941 Ford 1/2 ton pick-ups (no 3/4 ton or larger). All gear sets are direct replacements for stock, non-quickchange rear axles. 6-spline input.

    • Fits 1935-48 Passenger Cars or 1935-41 Ford 1/2 ton pickups
    • Does not fit 3/4 ton or larger
    • Stock (non-quick change)
    • All gear sets are direct replacements
    • Six spline input
    • 3.54 gear ratio

    Installation Instructions  (PDF)

  • Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    x
                

    High cornering forces can force the gear lube out of the center section and down the axle tube leaving the ring and pinion high and dry! This billet aluminum seal has three O-rings that seal it to the axle tube and two bonded, heavy duty, neoprene inner seals designed to compensate for any amount of axle shaft runout. Keeps gear oil in the center section. These seals will take up to an 1.5” diameter axle.

    • Anodized billet aluminum
    • A must for cambered rear ends
    • For 9" Ford Grand National and Quick Change type housings
    • For up to 1.5” diameter axle
    • Keeps gear oil in the center section
    • Outside Diameter: 2.56"
    • Overall Length: 1.50"
    • This seal will fit our steel wide 5 axle
    • Choose housing tube I.D. size needed:
      • 2.500" - Gold
      • 2.562" - Blue
      • 2.625" - Red
      • 2.750" - Silver

    919-0951 Instructions (PDF)

  • Winters Modified Quick Change Rear End
    From: $1,399.99
    Winters Modified Quick Change Rear End
    x
                

    If you run at any of the Outlaw modified races you will need one of these Winters steel tubed quick changes. It is 60" wide with no offset and 4.86 gears on an aluminum spool.

    Choose bare as pictured or with 30.5" 31 splined axles, brake rotors, and 5 X 5" GN hubs.

    Replacement steel axle tubes and 31 spline axles are available if needed.

  • Winters 1 Inch Midget Gear Set
    From: $69.99
    Winters 1 Inch Midget Gear Set
    x
                

    1" wide midget 6 spline gear sets are CNC machined from 8620 steel and are heat treated.

    Buy three or more sets, and each set is only $69.99

    Midget Rear End Guide

    Midget Gear Set Chart Application
  • Winters Performance SR2525 SR8207 SR2980 56 Inch Quickchange, Polished
    Winters Performance SR2525 SR8207 SR2980 56 Inch Quickchange, Polished
    x
                

    Winter's Championship rear end is available with either plain or fully polished housing, six-rib side bells and standard rear cover. Features a standard driveshaft yoke, heat treated lower shaft, 31-spline Winters Track posi differential, and a 4.12:1 ring and pinion.

    Housing ends are standard 3.15" big Ford and include 2.5" offset axles. Axles drilled for both 5 on 4-1/2" and 5 on 4-3/4" bolt patterns. Measures 56" from axle flange to axle flange and requires our part #91711 10-spline quick change gears.

    THIS ITEM SHIPS TRUCK FREIGHT

  • Pro-Eliminator Rear End Replace Parts, Heavy Duty Gear Cover Bearing Cap
    Pro-Eliminator Rear End Replace Parts, Heavy Duty Gear Cover Bearing Cap
    x
                

    These Pro-Eliminator rearend replacement parts are in stock and ready to order.

    • Heavy Duty Gear Cover Bearing Cap

    Quick Change Gear Sets, part number 91711-..., which is #41 on the diagram link below, are located elsewhere on this website.

    Note: This part is for sale because we either do not carry this product anymore or never have carried this brand/style before. Damages will be noted if applicable.

     Pro Eliminator Rear End Diagram (GIF)

  • Pro-Eliminator Rear End Parts, Winters Pinion Shaft Double Bearing Cup
    Pro-Eliminator Rear End Parts, Winters Pinion Shaft Double Bearing Cup
    x
                

    Pro-Eliminator and Winters Rearend Replacement Parts

    • Winters Pinion Shaft Double Bearing Cup

    Speedway Motors has everyting you need to repair or upgrade your Winters quick change rearend. From center sections and gear sets to bearings, washers and O-Rings, we can help you get your rear back on the track!

    Winters Replacement Parts Figure (pdf)

    Pro Eliminator Rear End Diagram (GIF) 

  • Winters Performance 7442 Pro-Eliminator Large Shifter Shaft O-Ring
    Winters Performance 7442 Pro-Eliminator Large Shifter Shaft O-Ring
    x
                

    These Pro-Eliminator rear end replacement parts are in stock and ready to order.

    • Large Shifter Shaft O-Ring

    Quick Change Gear Sets, part number 91711-..., which is #41 on the diagram link below, are located elsewhere on this website.

    Note: This part is for sale because we either do not carry this product anymore or never have carried this brand/style before. Damages will be noted if applicable.

     Pro Eliminator Rear End Diagram (GIF)

  • Pro-Eliminator Rear End Replace Parts, Shifter Shaft External Snap Ring
    Pro-Eliminator Rear End Replace Parts, Shifter Shaft External Snap Ring
    x
                

    These Pro-Eliminator rearend replacement parts are in stock and ready to order.

    • Shifter Shaft External Snap Ring

    Quick Change Gear Sets, part number 91711-..., which is #41 on the diagram link below, are located elsewhere on this website.

    Note: This part is for sale because we either do not carry this product anymore or never have carried this brand/style before. Damages will be noted if applicable.

     Pro Eliminator Rear End Diagram (GIF)

  • Pro-Eliminator Rear End Replace Parts, Stationary Coupler Ball Bearing
    Pro-Eliminator Rear End Replace Parts, Stationary Coupler Ball Bearing
    x
                

    These Pro-Eliminator rearend replacement parts are in stock and ready to order.

    • Stationary Coupler Ball Bearing

    Quick Change Gear Sets, part number 91711-..., which is #41 on the diagram link below, are located elsewhere on this website.

    Note: This part is for sale because we either do not carry this product anymore or never have carried this brand/style before. Damages will be noted if applicable.

    Pro Eliminator Rear End Diagram (GIF)

  • Winters Performance SR2550 8207 56 Inch V-8 Quickchange, Polished
    Winters Performance SR2550 8207 56 Inch V-8 Quickchange, Polished
    x
                

    It's been a long time since you could buy a 100% brand new V-8 quick change rearend with the features this one showcases. Each of these rear assemblies includes new axles with 5 on 4-1/2" and 5 on 4-3/4" bolt patterns, 3.78:1 ring & pinion, Wedgelock differential, 1310 series yoke, and plain steel axle tubes. Accepts our part #91712 6-spline quick change gears.

    56" wide hub-to-hub. Uses the big Ford bearing (3.150") and has a 2-1/2" axle offset.

    THIS ITEM SHIPS TRUCK FREIGHT

  • Winters Performance 5010 Pro-Eliminator Rearend Thrustblock
    Winters Performance 5010 Pro-Eliminator Rearend Thrustblock
    x
                

    Pro-Eliminator and Winters Rearend Replacement Parts

    • Winters Thrustblock

    Speedway Motors has everyting you need to repair or upgrade your Winters quick change rearend. From center sections and gear sets to bearings, washers and O-Rings, we can help you get your rear back on the track!

    Winters Replacement Parts Figure (PDF)

    Pro Eliminator Rear End Diagram (GIF) 

  • Pro-Eliminator Rear End Parts, Lower Shaft Special Seal Ball Bearing
    Pro-Eliminator Rear End Parts, Lower Shaft Special Seal Ball Bearing
    x
                

    These Pro-Eliminator rear end replacement parts are in stock and ready to order.

    • Lower Shaft Special Seal Ball Bearing

    Quick Change Gear Sets, part number 91711-..., which is #41 on the diagram link below, are located elsewhere on this website.

    Note: This part is for sale because we either do not carry this product anymore or never have carried this brand/style before. Damages will be noted if applicable.

     Pro Eliminator Rear End Diagram (GIF)

  • Pro-Eliminator Rear End Parts, Integral 10-10 Coupler External Snap Ring
    Pro-Eliminator Rear End Parts, Integral 10-10 Coupler External Snap Ring
    x
                

    These Pro-Eliminator rear end replacement parts are in stock and ready to order.

    • Integral 10-10 Coupler External Snap Ring

    Quick Change Gear Sets, part number 91711-..., which is #41 on the diagram link below, are located elsewhere on this website.

    Note: This part is for sale because we either do not carry this product anymore or never have carried this brand/style before. Damages will be noted if applicable.

     Pro Eliminator Rear End Diagram (GIF)

  • Winters Performance 6515 Pro-Eliminator Gasket Shifter Housing
    Winters Performance 6515 Pro-Eliminator Gasket Shifter Housing
    x
                

    These Pro-Eliminator rearend replacement parts are in stock and ready to order.

    •  Gasket Shifter Housing

    Quick Change Gear Sets, part number 91711-..., which is #41 on the diagram link below, are located elsewhere on this website.

    Note: This part is for sale because we either do not carry this product anymore or never have carried this brand/style before. Damages will be noted if applicable.

     Pro Eliminator Rear End Diagram (GIF)

  • Winters Performance 5714-THREADED Ring & Pinion Set, 4.12 Bare
    Winters Performance 5714-THREADED Ring & Pinion Set, 4.12 Bare
    x
                

    Winters ring & pinion for quick change with threaded ring gears. Comes with ring gear bolts.

    Pro Eliminator Rear End Diagram (GIF)

  • Pro-Eliminator Rear End Replacement Parts, Nylon Locknut, 7/16 Inch-20
    Pro-Eliminator Rear End Replacement Parts, Nylon Locknut, 7/16 Inch-20
    x
                

    These Pro-Eliminator rear end replacement parts are in stock and ready to order.

    • Nylon Locknut, 7/16 Inch-20
    • use with #802-2266

    Quick Change Gear Sets, part number 91711-..., which is #41 on the diagram link below, are located elsewhere on this website.

    Note: This part is for sale because we either do not carry this product anymore or never have carried this brand/style before. Damages will be noted if applicable.

     Pro Eliminator Rear End Diagram (GIF)

  • Winters Performance Nostalgia V-8 Quickchange, Polished Housing
    Winters Performance Nostalgia V-8 Quickchange, Polished Housing
    x
                Finally an all new V-8 quick change that has steel side bells and tubes that accept modern axles. They are available in either plain finish or a polished center section that includes stainless steel fasteners. These rear ends are 56" from hub to hub and have both 5 on 4 1/2" and 5 on 4 3/4" bolt patterns. They accept the new style big Ford brakes with a 2 1/2" offset and the standard Spicer 1310 Chevy 3-1/4" u-joint. The 3.78 ring and pinion is mounted on a wedgelock differential and accepts common 6 spline quick change gears. 
            
  • Winters Performance SR2550STB SR2960 Nostalgia V8 Quickchange, Plain
    Winters Performance SR2550STB SR2960 Nostalgia V8 Quickchange, Plain
    x
                Finally an all new V8 quick change that has steel side bells and tubes that accept modern axles. They are available in either plain finish or a polished center section that includes stainless steel fasteners. These rear ends are 56" from hub to hub and have both 5 on 4 1/2" and 5 on 4 3/4" bolt patterns. They accept the new style big Ford brakes with a 2 1/2" offset and the standard Spicer 1310 Chevy 3-1/4" u-joint. The 3.78 ring and pinion is mounted on a wedgelock differential and accepts common 6 spline quick change gears. 
            
Goto Previous PagePrevious Page
1 2 3