Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"quick change rear" Page 1 of 6

  • Pro-Eliminator/Winters Rear Cover Gasket, Heavy Duty w/ Steel Core
    Pro-Eliminator/Winters Rear Cover Gasket, Heavy Duty w/ Steel Core
    x
                

    Pro-Eliminator and Winters replacement gasket for Winters quick change rear ends. Available in heavy duty reuseable with a steel core.

    Speedway Motors has everyting you need to repair or upgrade your Winters quick change rearend. From center sections and gear sets to bearings, washers and O-Rings, we can help you get your rear back on the track!

    Winters Replacement Parts Figure (PDF)

    Pro Eliminator Rear End Diagram (GIF) 

     

  • Rear End Fluid Level Checker
    $29.99
    Rear End Fluid Level Checker
    x
                

    Screws into fill hole. For better installation, drill hole below fill hole. Ideal for big quick change rear cover, 1/8" NPT.

    You will have to drill and tap rear cover 92547004 to use this level checker. 

  • SuperSeal Rear Cover Gasket for Halibrand Quick Change
    SuperSeal Rear Cover Gasket for Halibrand Quick Change
    x
                Our paper gaskets provide a great quality seal at a very low price. These gaskets are for popular Halibrand quickchange rear axles.
            
  • Speedway Tribute T-Bucket Kit
    $3,999.99
    Product Rating: 5.00 Stars
    Speedway Tribute T-Bucket Kit
    x
                

    If you thought all T-buckets were the same, think again! The all-new Speedway Motors Tribute T breaks the T-bucket mold. It offers the traditional look of classic, competition-influenced roadsters combined with modern components and refined engineering. All this in a comfortable package that's easy to assemble using basic hand tools.

    The Tribute T frame has an extra-high rear kickup and Model A rear crossmember that will accept our medium-arch rear leaf spring. Rear axle options include our bolt-on Winters quick-change kit 7151801, bolt-on 9" Ford rear axle option 7151809, or a Ford-style banjo rear end of your choice (must be a centered-pinion rear axle). The front suspension uses a 4 inch drop I-beam axle, wishbone-style radius rods and traditional steering with a reversed Corvair steering box. All suspension, steering and brake pedal brackets are pre-welded to the frame and you can choose from flathead F

  • Winters Sprint/Midget Rearend Nut for Quick Change Cover
    Winters Sprint/Midget Rearend Nut for Quick Change Cover
    x
                Use these aluminum rear cover nuts on your Winters rear ends. They are sold individually and feature an anodized red finish.
    • Aluminum rear cover nuts
    • Red anodize
    • Fit Winters rearends
    • Sold individually
  • Speedway Tribute T-Bucket Quick Change Rear End Kit
    Speedway Tribute T-Bucket Quick Change Rear End Kit
    x
                Please view the product's page for more information
            
  • Pro-Eliminator Rear End Replace Parts, Rear Bearing Internal Snap Ring
    Pro-Eliminator Rear End Replace Parts, Rear Bearing Internal Snap Ring
    x
                

    These Pro-Eliminator rear end replacement parts are in stock and ready to order.

    • Rear Bearing Internal Snap Ring

    Quick Change Gear Sets, part number 91711-..., which is #41 on the diagram link below, are located elsewhere on this website.

    Note: This part is for sale because we either do not carry this product anymore or never have carried this brand/style before. Damages will be noted if applicable.

     Pro Eliminator Rear End Diagram (GIF)

  • Winters Performance SR2525 SR2980 56 Inch Quickchange Rear End, Plain
    Winters Performance SR2525 SR2980 56 Inch Quickchange Rear End, Plain
    x
                

    Winter's Championship rear end is available with either plain or fully polished housing, six-rib side bells and standard rear cover. Features a standard driveshaft yoke, heat treated lower shaft, 31-spline Winters Track posi differential, and a 4.12:1 ring and pinion.

    Housing ends are standard 3.15" big Ford and include 2.5" offset axles. Axles drilled for both 5 on 4-1/2" and 5 on 4-3/4" bolt patterns. Measures 56" from axle flange to axle flange and requires our part #91711 10-spline quick change gears.

    THIS ITEM SHIPS TRUCK FREIGHT

  • Halibrand V8 Quick Change Rear Cover Plate
    Halibrand V8 Quick Change Rear Cover Plate
    x
                We found a limited supply of these rare Halibrand V8 quick change parts. This rear cover plate is machined for bearings to press in and use on a quick change rear end.

    Click to See Application Chart (Link)

  • Fel-Pro Gaskets 2303 Quick Change Rear Cover Gasket
    Fel-Pro Gaskets 2303 Quick Change Rear Cover Gasket
    x
                Premium Fel-Pro 1/32" thick, steel core gasket. Non-stick coating means this gasket is reusable. Fits Winters or Frankland quick change rear ends.
            
  • Winters Performance 6729 Replacement Rear Cover Gasket, Paper
    Winters Performance 6729 Replacement Rear Cover Gasket, Paper
    x
                

    Winters replacement gasket for Winters quick change rear ends. Available in economical paper.

    Winters Exploded View Figure (GIF)

  • Winters Modified Quick Change Rear End
    From: $1,399.99
    Winters Modified Quick Change Rear End
    x
                

    If you run at any of the Outlaw modified races you will need one of these Winters steel tubed quick changes. It is 60" wide with no offset and 4.86 gears on an aluminum spool.

    Choose bare as pictured or with 30.5" 31 splined axles, brake rotors, and 5 X 5" GN hubs.

    Replacement steel axle tubes and 31 spline axles are available if needed.

  • Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    x
                

    High cornering forces can force the gear lube out of the center section and down the axle tube leaving the ring and pinion high and dry! This billet aluminum seal has three O-rings that seal it to the axle tube and two bonded, heavy duty, neoprene inner seals designed to compensate for any amount of axle shaft runout. Keeps gear oil in the center section. These seals will take up to an 1.5” diameter axle.

    • Anodized billet aluminum
    • A must for cambered rear ends
    • For 9" Ford Grand National and Quick Change type housings
    • For up to 1.5” diameter axle
    • Keeps gear oil in the center section
    • Outside Diameter: 2.56"
    • Overall Length: 1.50"
    • This seal will fit our steel wide 5 axle
    • Choose housing tube I.D. size needed:
      • 2.500" - Gold
      • 2.562" - Blue
      • 2.625" - Red
      • 2.750" - Silver

    919-0951 Instructions (PDF)

  • Halibrand Rear End Nuts and Studs - Set of 12
    Halibrand Rear End Nuts and Studs - Set of 12
    x
                

    Set of (12) studs and aluminum rear cover nuts for retaining rear cover on Halibrand quick-change rear end.

    • Stud Threads:  5/16" coarse
    • Stud Length:  1-3/4"
  • Pro-Eliminator Rear End Replace Parts, Winters Ring & Pinion Set, 4.86 Bare
    Pro-Eliminator Rear End Replace Parts, Winters Ring & Pinion Set, 4.86 Bare
    x
                

    Winters ring & pinion for quick change with threaded rearend ring gears. Comes with ring gear bolts.

    Pro Eliminator Rear End Diagram (GIF)

  • Aluminum Rear End Oiling Can, 24 Oz., -8 AN
    Aluminum Rear End Oiling Can, 24 Oz., -8 AN
    x
                This 24 oz. aluminum canister holds enough rear end lube to fill standard Winters or Franklin quick change rear ends. It features a single -8 AN male fitting on the bottom of the canister and includes a steel cap. Canister is 7-1/2" tall and 3-1/4" in diameter.
            
  • Quick Change Panhard Bar Bracket, 1 Hole
    Quick Change Panhard Bar Bracket, 1 Hole
    x
                  These single hole quick change rear end panhard bar mounting brackets  fit all quick change rear ends.  Lightweight aluminum.             
            
  • Winters Performance SR2525 SR8207 SR2980 56 Inch Quickchange, Polished
    Winters Performance SR2525 SR8207 SR2980 56 Inch Quickchange, Polished
    x
                

    Winter's Championship rear end is available with either plain or fully polished housing, six-rib side bells and standard rear cover. Features a standard driveshaft yoke, heat treated lower shaft, 31-spline Winters Track posi differential, and a 4.12:1 ring and pinion.

    Housing ends are standard 3.15" big Ford and include 2.5" offset axles. Axles drilled for both 5 on 4-1/2" and 5 on 4-3/4" bolt patterns. Measures 56" from axle flange to axle flange and requires our part #91711 10-spline quick change gears.

    THIS ITEM SHIPS TRUCK FREIGHT

  • Pro-Eliminator Rear End Parts, Winters Pinion Shaft Double Bearing Cup
    Pro-Eliminator Rear End Parts, Winters Pinion Shaft Double Bearing Cup
    x
                

    Pro-Eliminator and Winters Rearend Replacement Parts

    • Winters Pinion Shaft Double Bearing Cup

    Speedway Motors has everyting you need to repair or upgrade your Winters quick change rearend. From center sections and gear sets to bearings, washers and O-Rings, we can help you get your rear back on the track!

    Winters Replacement Parts Figure (pdf)

    Pro Eliminator Rear End Diagram (GIF) 

  • Pro-Eliminator Rear End Replace Parts, Side Bell Seal Internal Snap Ring
    Pro-Eliminator Rear End Replace Parts, Side Bell Seal Internal Snap Ring
    x
                

    These Pro-Eliminator rear end replacement parts are in stock and ready to order.

    • Side Bell Seal Internal Snap Ring

    Quick Change Gear Sets, part number 91711-..., which is #41 on the diagram link below, are located elsewhere on this website.

    Note: This part is for sale because we either do not carry this product anymore or never have carried this brand/style before. Damages will be noted if applicable.

     Pro Eliminator Rear End Diagram (GIF)

  • Pro-Eliminator Rear End Replace Parts, Shifter Shaft External Snap Ring
    Pro-Eliminator Rear End Replace Parts, Shifter Shaft External Snap Ring
    x
                

    These Pro-Eliminator rearend replacement parts are in stock and ready to order.

    • Shifter Shaft External Snap Ring

    Quick Change Gear Sets, part number 91711-..., which is #41 on the diagram link below, are located elsewhere on this website.

    Note: This part is for sale because we either do not carry this product anymore or never have carried this brand/style before. Damages will be noted if applicable.

     Pro Eliminator Rear End Diagram (GIF)

  • Pro-Eliminator Rear End Replace Parts, Stationary Coupler Ball Bearing
    Pro-Eliminator Rear End Replace Parts, Stationary Coupler Ball Bearing
    x
                

    These Pro-Eliminator rearend replacement parts are in stock and ready to order.

    • Stationary Coupler Ball Bearing

    Quick Change Gear Sets, part number 91711-..., which is #41 on the diagram link below, are located elsewhere on this website.

    Note: This part is for sale because we either do not carry this product anymore or never have carried this brand/style before. Damages will be noted if applicable.

    Pro Eliminator Rear End Diagram (GIF)

  • Pro-Eliminator Rear End Replace Parts, Heavy Duty Gear Cover Bearing Cap
    Pro-Eliminator Rear End Replace Parts, Heavy Duty Gear Cover Bearing Cap
    x
                

    These Pro-Eliminator rearend replacement parts are in stock and ready to order.

    • Heavy Duty Gear Cover Bearing Cap

    Quick Change Gear Sets, part number 91711-..., which is #41 on the diagram link below, are located elsewhere on this website.

    Note: This part is for sale because we either do not carry this product anymore or never have carried this brand/style before. Damages will be noted if applicable.

     Pro Eliminator Rear End Diagram (GIF)

  • 1935-1948 Ford/Mercury High Speed Ring and Pinion Gear Set, 3.54 Gear Ratio
    1935-1948 Ford/Mercury High Speed Ring and Pinion Gear Set, 3.54 Gear Ratio
    x
                

    These fit 1935-1948 passenger cars or 1935-1941 Ford 1/2 ton pick-ups (no 3/4 ton or larger). All gear sets are direct replacements for stock, non-quickchange rear axles. 6-spline input.

    • Fits 1935-48 Passenger Cars or 1935-41 Ford 1/2 ton pickups
    • Does not fit 3/4 ton or larger
    • Stock (non-quick change)
    • All gear sets are direct replacements
    • Six spline input
    • 3.54 gear ratio

    Installation Instructions  (PDF)

  • Winters 1 Inch Midget Gear Set
    From: $69.99
    Winters 1 Inch Midget Gear Set
    x
                

    1" wide midget 6 spline gear sets are CNC machined from 8620 steel and are heat treated.

    Buy three or more sets, and each set is only $69.99

    Midget Rear End Guide

    Midget Gear Set Chart Application
  • Longacre 22568 Rear End Axle Breather Vent Kit, 1-3/4 Inch Tube Clamp
    Longacre 22568 Rear End Axle Breather Vent Kit, 1-3/4 Inch Tube Clamp
    x
                

    These Longacre billet rear-end breathers provide a convenient way to vent rear differentials, transmissions, and other components. They're easy to use--just clamp them on to a roll bar and no welding is required.

    • Tube clamp on design, no welding required
    • Includes vent, hardware, and hose for a quick professional installation
    • Differential Vent Thread Size (in):  0.125
    • Differential Vent Head Style:  Round
    • Differential Vent Material:  Steel/Rubber
    • Differential Vent Finish:  Chrome
    • This bracket mounts to 1-3/4 in. round bar.
  • Longacre 22569 Rear End Axle Breather Vent Kit, 1-1/2 Inch Tube Clamp
    Longacre 22569 Rear End Axle Breather Vent Kit, 1-1/2 Inch Tube Clamp
    x
                

    These Longacre billet rear-end breathers provide a convenient way to vent rear differentials, transmissions, and other components. They're easy to use--just clamp them on to a roll bar and no welding is required.

    • 1/4" NPT
    • Clamp on design, no welding required
    • Includes vent, hardware, and hose for a quick professional installation
    • Differential Vent Thread Size (in):  0.125
    • Differential Vent Head Style:  Round
    • Differential Vent Material:  Steel/Rubber
    • Differential Vent Finish:  Chrome
    • This bracket mounts to 1-1/2 in. round bar.
  • Winters Performance SR2550 8207 56 Inch V-8 Quickchange, Polished
    Winters Performance SR2550 8207 56 Inch V-8 Quickchange, Polished
    x
                

    It's been a long time since you could buy a 100% brand new V-8 quick change rearend with the features this one showcases. Each of these rear assemblies includes new axles with 5 on 4-1/2" and 5 on 4-3/4" bolt patterns, 3.78:1 ring & pinion, Wedgelock differential, 1310 series yoke, and plain steel axle tubes. Accepts our part #91712 6-spline quick change gears.

    56" wide hub-to-hub. Uses the big Ford bearing (3.150") and has a 2-1/2" axle offset.

    THIS ITEM SHIPS TRUCK FREIGHT

Goto Previous PagePrevious Page
1 2 3 4 5 6