Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"quick change cover" Page 1 of 3

  • Winters Sprint/Midget Rearend Nut for Quick Change Cover
    Winters Sprint/Midget Rearend Nut for Quick Change Cover
    x
                Use these aluminum rear cover nuts on your Winters rear ends. They are sold individually and feature an anodized red finish.
    • Aluminum rear cover nuts
    • Red anodize
    • Fit Winters rearends
    • Sold individually
  • Quick Change Cam Cover Kit, Plain
    Quick Change Cam Cover Kit, Plain
    x
                

    Quick change cam cover eliminates the need for dropping the oil pan when replacing timing chain or advancing camshaft. Fits small block Chevy with "long" style (1969-1986) water pump.

    Use of this cover with a "short" water pump typically causes clearance issues with the back of the pump. It can be used with a short pump, but the pump would need to be shimmed for clearance.

  • Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    x
                

    High cornering forces can force the gear lube out of the center section and down the axle tube leaving the ring and pinion high and dry! This billet aluminum seal has three O-rings that seal it to the axle tube and two bonded, heavy duty, neoprene inner seals designed to compensate for any amount of axle shaft runout. Keeps gear oil in the center section. These seals will take up to an 1.5” diameter axle.

    • Anodized billet aluminum
    • A must for cambered rear ends
    • For 9" Ford Grand National and Quick Change type housings
    • For up to 1.5” diameter axle
    • Keeps gear oil in the center section
    • Outside Diameter: 2.56"
    • Overall Length: 1.50"
    • This seal will fit our steel wide 5 axle
    • Choose housing tube I.D. size needed:
      • 2.500" - Gold
      • 2.562" - Blue
      • 2.625" - Red
      • 2.750" - Silver

    919-0951 Instructions (PDF)

  • SuperSeal Rear Cover Gasket for Halibrand Quick Change
    SuperSeal Rear Cover Gasket for Halibrand Quick Change
    x
                Our paper gaskets provide a great quality seal at a very low price. These gaskets are for popular Halibrand quickchange rear axles.
            
  • Winters Performance SR2525 SR2980 56 Inch Quickchange Rear End, Plain
    Winters Performance SR2525 SR2980 56 Inch Quickchange Rear End, Plain
    x
                

    Winter's Championship rear end is available with either plain or fully polished housing, six-rib side bells and standard rear cover. Features a standard driveshaft yoke, heat treated lower shaft, 31-spline Winters Track posi differential, and a 4.12:1 ring and pinion.

    Housing ends are standard 3.15" big Ford and include 2.5" offset axles. Axles drilled for both 5 on 4-1/2" and 5 on 4-3/4" bolt patterns. Measures 56" from axle flange to axle flange and requires our part #91711 10-spline quick change gears.

    THIS ITEM SHIPS TRUCK FREIGHT

  • Winters Performance SR2525 SR8207 SR2980 56 Inch Quickchange, Polished
    Winters Performance SR2525 SR8207 SR2980 56 Inch Quickchange, Polished
    x
                

    Winter's Championship rear end is available with either plain or fully polished housing, six-rib side bells and standard rear cover. Features a standard driveshaft yoke, heat treated lower shaft, 31-spline Winters Track posi differential, and a 4.12:1 ring and pinion.

    Housing ends are standard 3.15" big Ford and include 2.5" offset axles. Axles drilled for both 5 on 4-1/2" and 5 on 4-3/4" bolt patterns. Measures 56" from axle flange to axle flange and requires our part #91711 10-spline quick change gears.

    THIS ITEM SHIPS TRUCK FREIGHT

  • DMI RRC-1373 Vault-Lock Quick Change Sprint Rearend Gear Cover
    New
    DMI RRC-1373 Vault-Lock Quick Change Sprint Rearend Gear Cover
    x
                

    The Vault-Lock rearend gear cover turns timely gear changes into a 15 second job!  These covers eliminate the process of having to remove and reinstall the 6 outside cover bolts by utilizing the patent pending center Vault-Lock design.  Designed to fit Winters or DMI rearends.

    • Speed-up gear change time with the Vault-Lock gear cover
    • Fits Winters Performance or DMI rearends
  • Halibrand V8 Quick Change Rear Cover Plate
    Halibrand V8 Quick Change Rear Cover Plate
    x
                We found a limited supply of these rare Halibrand V8 quick change parts. This rear cover plate is machined for bearings to press in and use on a quick change rear end.

    Click to See Application Chart (Link)

  • Pro-Eliminator/Winters Rear Cover Gasket, Heavy Duty w/ Steel Core
    Pro-Eliminator/Winters Rear Cover Gasket, Heavy Duty w/ Steel Core
    x
                

    Pro-Eliminator and Winters replacement gasket for Winters quick change rear ends. Available in heavy duty reuseable with a steel core.

    Speedway Motors has everyting you need to repair or upgrade your Winters quick change rearend. From center sections and gear sets to bearings, washers and O-Rings, we can help you get your rear back on the track!

    Winters Replacement Parts Figure (PDF)

    Pro Eliminator Rear End Diagram (GIF) 

     

  • Speedway Tribute T-Bucket Quick Change Rear End Kit
    Speedway Tribute T-Bucket Quick Change Rear End Kit
    x
                Please view the product's page for more information
            
  • Quick Change Cam Cover Kit, Chrome
    Quick Change Cam Cover Kit, Chrome
    x
                

    Quick change cam cover eliminates the need for dropping the oil pan when replacing timing chain or advancing camshaft. Fits small block Chevy with "long" style (1969-1986) water pump.

    Use of this cover with a "short" water pump typically causes clearance issues with the back of the pump. It can be used with a short pump, but the pump would need to be shimmed for clearance.

  • Champ Style Quick Change Jag Rear Cover, Polished
    Champ Style Quick Change Jag Rear Cover, Polished
    x
                

    Get the look of a Champ quick change with this Jaguar differential cover. Cover includes a vent and fill hole. Fully polished.

    Measures 8-3/4" front to back.

  • Winters Performance Nostalgia V-8 Quickchange, Polished Housing
    Winters Performance Nostalgia V-8 Quickchange, Polished Housing
    x
                Finally an all new V-8 quick change that has steel side bells and tubes that accept modern axles. They are available in either plain finish or a polished center section that includes stainless steel fasteners. These rear ends are 56" from hub to hub and have both 5 on 4 1/2" and 5 on 4 3/4" bolt patterns. They accept the new style big Ford brakes with a 2 1/2" offset and the standard Spicer 1310 Chevy 3-1/4" u-joint. The 3.78 ring and pinion is mounted on a wedgelock differential and accepts common 6 spline quick change gears. 
            
  • Winters Performance 6729 Replacement Rear Cover Gasket, Paper
    Winters Performance 6729 Replacement Rear Cover Gasket, Paper
    x
                

    Winters replacement gasket for Winters quick change rear ends. Available in economical paper.

    Winters Exploded View Figure (GIF)

  • Lokar 1210147 Anchor-Tight Locking Trans Dipstick, Powerglide, Black
    Lokar 1210147 Anchor-Tight Locking Trans Dipstick, Powerglide, Black
    x
                

    You have flexibility with Lokar's teflon-lined braided stainless transmission dipstick. Kit comes complete with braided stainless outer housing and heat resistant E-Z to read flexible inner dipstick measuring cable. Billet aluminum handle and billet aluminum fittings complement Lokar's flexible dipsticks.

    NHRA accepted for use in all categories of competition!

    • No filler tube needed
    • Locking mechanism eliminates expulsion of dipstick handle under trans pressure
    • Bolted in sealed pan fitting
    • Large filler tube accepts standard transmission funnels
    • Made from 6061-T6 aluminum
    • Teflon-lined stainless braided outer housing
    • Flexible inner dipstick measuring cable
    • No pan fitting leaks during storage
    • Dipsticks available with firewall mounting bracket
    • Supplied with transmission storage plug for quick change & storage
    • Spare trans fittings available for quick transmission changes
    • Available for GM Powerglide transmissions
    • Available in black anodized finish

    Application Chart for Locking Flexible Transmission Dipsticks (Link)

    4911210147 Installation Instructions (PDF) 

  • Lokar 1211244 GM 700R4 Anchor-Tight Locking Trans Dipstick, Brite
    Lokar 1211244 GM 700R4 Anchor-Tight Locking Trans Dipstick, Brite
    x
                

    You have flexibility with Lokar's teflon-lined braided stainless 700R4 transmission dipstick. Kit comes complete with braided stainless outer housing and heat resistant E-Z to read flexible inner dipstick measuring cable. Billet aluminum handle and billet aluminum fittings complement Lokar's flexible dipsticks.

    NHRA accepted for use in all categories of competition!

    • No filler tube needed
    • Locking mechanism eliminates expulsion of dipstick handle under trans pressure
    • Bolted in sealed pan fitting
    • Large filler tube accepts standard transmission funnels
    • Made from 6061-T6 aluminum
    • Teflon-lined stainless braided outer housing
    • Flexible inner dipstick measuring cable
    • No pan fitting leaks during storage
    • Dipsticks available with firewall mounting bracket
    • Supplied with transmission storage plug for quick change & storage
    • Spare trans fittings available for quick transmission changes
    • Available for GM 700R4 transmissions
    • Available in Brite anodized finish

    Application Chart for Locking Flexible Transmission Dipsticks (Link)

    4911211244 Installation Instructions (PDF) 

  • Lokar 1210144 Anchor-Tight Locking Trans Dipstick, Powerglide, Brite
    Lokar 1210144 Anchor-Tight Locking Trans Dipstick, Powerglide, Brite
    x
                

    You have flexibility with Lokar's teflon-lined braided stainless transmission dipstick. Kit comes complete with braided stainless outer housing and heat resistant E-Z to read flexible inner dipstick measuring cable. Billet aluminum handle and billet aluminum fittings complement Lokar's flexible dipsticks.

    NHRA accepted for use in all categories of competition!

    • No filler tube needed
    • Locking mechanism eliminates expulsion of dipstick handle under trans pressure
    • Bolted in sealed pan fitting
    • Large filler tube accepts standard transmission funnels
    • Made from 6061-T6 aluminum
    • Teflon-lined stainless braided outer housing
    • Flexible inner dipstick measuring cable
    • No pan fitting leaks during storage
    • Dipsticks available with firewall mounting bracket
    • Supplied with transmission storage plug for quick change & storage
    • Spare trans fittings available for quick transmission changes
    • Available for GM Powerglide transmissions
    • Available in brite anodized finish

    Application Chart for Locking Flexible Transmission Dipsticks (Link)

    4911210144 Installation Instructions (PDF) 

  • Rear End Fluid Level Checker
    $29.99
    Rear End Fluid Level Checker
    x
                

    Screws into fill hole. For better installation, drill hole below fill hole. Ideal for big quick change rear cover, 1/8" NPT.

    You will have to drill and tap rear cover 92547004 to use this level checker. 

  • Lokar 1211147 TH350-TH400 Anchor-Tight Locking Trans Dipstick, Black
    Lokar 1211147 TH350-TH400 Anchor-Tight Locking Trans Dipstick, Black
    x
                Please view the product's page for more information
            
  • Lokar 1211144-36 TH350-TH400 Anchor-Tight Lock Trans Dipstick, Brite
    Lokar 1211144-36 TH350-TH400 Anchor-Tight Lock Trans Dipstick, Brite
    x
                Please view the product's page for more information
            
  • Winters Performance 6746 Quick Change Standard Rear Cover
    Winters Performance 6746 Quick Change Standard Rear Cover
    x
                
    • Standard rear cover
    • Complete with bearings
  • Winters Performance K3736 Heavy Duty Rear End Gear Magensium Cover
    Winters Performance K3736 Heavy Duty Rear End Gear Magensium Cover
    x
                

    Winters Replacement Parts

    Magnesium rear covers. Complete with bearings.

    Speedway Motors has everyting you need to repair or upgrade your Winters quick change rearend. From center sections and gear sets to bearings, washers and O-Rings, we can help you get your rear back on the track!

    Winters Replacement Parts Figure (pdf)

  • OTB Gear 6900 1939-48 Ford PowerGen Finned Alternator Cover, Polished
    OTB Gear 6900 1939-48 Ford PowerGen Finned Alternator Cover, Polished
    x
                Impressive finned cover to dress up your '39 - '48  Ford style PowerGen alternator. Cast in A-356 aircraft aluminum alloy  here in the USA, and polished to show quality standards. Simply slides  on and secures with 2 set screws on the bottom. This is a quick upgrade  to change your alternator from boring to cool!... Also available in  unpolished finish. Sorry, this item will not fit the original Ford  generator, which has the wire poles on the side of the case. 
    • Polished
    • Fits flathead PowerGen
    • Secures with 2 set screws
    • Will not fit original Ford generator
  • Weld 735-51656 15 x 16 Inch Right Rear Wheel, 6 Inch Offset, Beadlock/Cover
    Weld 735-51656 15 x 16 Inch Right Rear Wheel, 6 Inch Offset, Beadlock/Cover
    x
                

    Weld Racing 15" diameter splined right rear sprint car wheels with outer beadlock and mud cover. Cast aluminum center, tough cold-forged aluminum alloy rim halves. Lightweight yet strong. Fully polished, guaranteed tubeless. Replacement halves available for quick repair or size change.

    • 15" diameter
    • Splined right rear
    • With outer beadlock and mud cover
    • Cast aluminum center
    • Fully polished, guaranteed tubeless
    • Replacement halves available for quick repair or size change

    Application Chart (GIF)

    Learn more about determining the proper wheel for your application by reading our tech article. Racing Wheel Principles.

  • Pro-Eliminator Rear End Replace Parts, Heavy Duty Gear Cover Bearing Cap
    Pro-Eliminator Rear End Replace Parts, Heavy Duty Gear Cover Bearing Cap
    x
                

    These Pro-Eliminator rearend replacement parts are in stock and ready to order.

    • Heavy Duty Gear Cover Bearing Cap

    Quick Change Gear Sets, part number 91711-..., which is #41 on the diagram link below, are located elsewhere on this website.

    Note: This part is for sale because we either do not carry this product anymore or never have carried this brand/style before. Damages will be noted if applicable.

     Pro Eliminator Rear End Diagram (GIF)

  • Winters Performance K6264 Pro-Eliminator Rearend Shifter Housing
    Winters Performance K6264 Pro-Eliminator Rearend Shifter Housing
    x
                

    These Pro-Eliminator rear end replacement parts are in stock and ready to order.

    • Shifter Housing

    Quick Change Gear Sets, part number 91711-..., which is #41 on the diagram link below, are located elsewhere on this website.

    Note: This part is for sale because we either do not carry this product anymore or never have carried this brand/style before. Damages will be noted if applicable.

     Pro Eliminator Rear End Diagram (GIF)

  • Winters Performance K3736-8208C HD Mag Rearend Quickchange Gear Cover
    Winters Performance K3736-8208C HD Mag Rearend Quickchange Gear Cover
    x
                These HD magnesium rearend gear covers for your sprint car are from Winters and are machined from magnesium.  They feature internal bearing retainers and 75 cooling fins.
    • Magnesium
    • Includes 75 cooling fins
    • Internal bearing retainers
    • Complete with bearings
  • Quick Time RM-6091 Chevy Automatic Transmission Midmount Plate with Safety Shield
    Quick Time RM-6091 Chevy Automatic Transmission Midmount Plate with Safety Shield
    x
                Fits all Small Block Chevy blocks. Fits Powerglide, 350 and 400 transmissions, clears 153 tooth flexplate. SFI 30.1 certified. Fits between the transmission and the motor, safety shield slides inside transmission. Makes changing motor transmission easier. Zinc plated.
            
Goto Previous PagePrevious Page
1 2 3