Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"quick change axle" Page 1 of 5

  • Winters Quick Change Gears, 10 Spline
    From: $59.99
    Product Rating: 5.00 Stars
    Winters Quick Change Gears, 10 Spline
    x
                
    • 8620 Steel
    • Heat Treated
    • CNC Machined
    • 10 spline
    • 1-1/4" Width

    Winters Quick Change Gear Chart

  • Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    x
                

    High cornering forces can force the gear lube out of the center section and down the axle tube leaving the ring and pinion high and dry! This billet aluminum seal has three O-rings that seal it to the axle tube and two bonded, heavy duty, neoprene inner seals designed to compensate for any amount of axle shaft runout. Keeps gear oil in the center section. These seals will take up to an 1.5” diameter axle.

    • Anodized billet aluminum
    • A must for cambered rear ends
    • For 9" Ford Grand National and Quick Change type housings
    • For up to 1.5” diameter axle
    • Keeps gear oil in the center section
    • Outside Diameter: 2.56"
    • Overall Length: 1.50"
    • This seal will fit our steel wide 5 axle
    • Choose housing tube I.D. size needed:
      • 2.500" - Gold
      • 2.562" - Blue
      • 2.625" - Red
      • 2.750" - Silver

    919-0951 Instructions (PDF)

  • B&J Midget Quick Change Gears
    From: $189.99
    B&J Midget Quick Change Gears
    x
                

    These are the lightest and strongest gears available!  Each gear is hand finished and inspected for superior quality.  Gears are 1" wide and made for 6-spline rearends.  Please use the chart below to determine which set(s) you need!

    Buy 3 or more sets and get each set for $189.99.

    B & J Quick Change Chart

  • Speedway Tribute T-Bucket Quick Change Rear End Kit
    Speedway Tribute T-Bucket Quick Change Rear End Kit
    x
                Please view the product's page for more information
            
  • Speedway Plastic Gear Box
    $5.99
    Product Rating: 4.00 Stars
    Speedway Plastic Gear Box
    x
                Use to protect and identify quick change gear sets.
            
  • 6 Spline V8 Quick Change Gears
    From: $79.99
    Product Rating: 5.00 Stars
    6 Spline V8 Quick Change Gears
    x
                

    These 6 spline midget gears are CNC machined from SAE 8620 steel. 1-3/8" wide gears.

    Buy three or more sets, and each set is ONLY $64.99

    Quick Change Gear Chart (PDF)

  • Winters Performance SR2525 SR2980 56 Inch Quickchange Rear End, Plain
    Winters Performance SR2525 SR2980 56 Inch Quickchange Rear End, Plain
    x
                

    Winter's Championship rear end is available with either plain or fully polished housing, six-rib side bells and standard rear cover. Features a standard driveshaft yoke, heat treated lower shaft, 31-spline Winters Track posi differential, and a 4.12:1 ring and pinion.

    Housing ends are standard 3.15" big Ford and include 2.5" offset axles. Axles drilled for both 5 on 4-1/2" and 5 on 4-3/4" bolt patterns. Measures 56" from axle flange to axle flange and requires our part #91711 10-spline quick change gears.

    THIS ITEM SHIPS TRUCK FREIGHT

  • Winters Performance SR2525 SR8207 SR2980 56 Inch Quickchange, Polished
    Winters Performance SR2525 SR8207 SR2980 56 Inch Quickchange, Polished
    x
                

    Winter's Championship rear end is available with either plain or fully polished housing, six-rib side bells and standard rear cover. Features a standard driveshaft yoke, heat treated lower shaft, 31-spline Winters Track posi differential, and a 4.12:1 ring and pinion.

    Housing ends are standard 3.15" big Ford and include 2.5" offset axles. Axles drilled for both 5 on 4-1/2" and 5 on 4-3/4" bolt patterns. Measures 56" from axle flange to axle flange and requires our part #91711 10-spline quick change gears.

    THIS ITEM SHIPS TRUCK FREIGHT

  • Speedway Tribute T-Bucket Kit
    $3,999.99
    Product Rating: 5.00 Stars
    Speedway Tribute T-Bucket Kit
    x
                

    If you thought all T-buckets were the same, think again! The all-new Speedway Motors Tribute T breaks the T-bucket mold. It offers the traditional look of classic, competition-influenced roadsters combined with modern components and refined engineering. All this in a comfortable package that's easy to assemble using basic hand tools.

    The Tribute T frame has an extra-high rear kickup and Model A rear crossmember that will accept our medium-arch rear leaf spring. Rear axle options include our bolt-on Winters quick-change kit 7151801, bolt-on 9" Ford rear axle option 7151809, or a Ford-style banjo rear end of your choice (must be a centered-pinion rear axle). The front suspension uses a 4 inch drop I-beam axle, wishbone-style radius rods and traditional steering with a reversed Corvair steering box. All suspension, steering and brake pedal brackets are pre-welded to the frame and you can choose from flathead F

  • Winters Performance SR2550 SR2980 56 Inch V8 Quickchange, Plain
    Winters Performance SR2550 SR2980 56 Inch V8 Quickchange, Plain
    x
                

    It's been a long time since you could buy a 100% brand new V-8 quick change with the features this one showcases. Each of these assemblies includes new axles with 5 on 4-1/2" and 5 on 4-3/4" bolt patterns, 3.78:1 ring & pinion, Wedgelock differential, 1310 series yoke, and plain steel axle tubes. Accepts our part #91712 6-spline quick change gears.

    56" wide hub-to-hub. Uses the big Ford bearing (3.150") (Big Ford / New Style ) and has a 2-1/2" axle offset.

    THIS ITEM SHIPS TRUCK FREIGHT

  • Winters Performance SR2550 8207 56 Inch V-8 Quickchange, Polished
    Winters Performance SR2550 8207 56 Inch V-8 Quickchange, Polished
    x
                

    It's been a long time since you could buy a 100% brand new V-8 quick change rearend with the features this one showcases. Each of these rear assemblies includes new axles with 5 on 4-1/2" and 5 on 4-3/4" bolt patterns, 3.78:1 ring & pinion, Wedgelock differential, 1310 series yoke, and plain steel axle tubes. Accepts our part #91712 6-spline quick change gears.

    56" wide hub-to-hub. Uses the big Ford bearing (3.150") and has a 2-1/2" axle offset.

    THIS ITEM SHIPS TRUCK FREIGHT

  • B&J Quick Change Gear Sets
    From: $174.99
    Product Rating: 5.00 Stars
    B&J Quick Change Gear Sets
    x
                

    SAVE! Buy 3 sets and you pay only $152.99 each.

    These gears have been used by more traveling professional racing teams than all others.  If you need gears that take less horsepower to run and will last many seasons these are the gears. Made with proprietary steel and proprietary heat treating. Under cut for lite weight. Crown shaved tooth profile.

    Quick Change Gear Set Chart Application

  • Winters 1 Inch Midget Gear Set
    From: $69.99
    Winters 1 Inch Midget Gear Set
    x
                

    1" wide midget 6 spline gear sets are CNC machined from 8620 steel and are heat treated.

    Buy three or more sets, and each set is only $69.99

    Midget Rear End Guide

    Midget Gear Set Chart Application
  • SuperSeal Rear Cover Gasket for Halibrand Quick Change
    SuperSeal Rear Cover Gasket for Halibrand Quick Change
    x
                Our paper gaskets provide a great quality seal at a very low price. These gaskets are for popular Halibrand quickchange rear axles.
            
  • Axle Tube for G.N. Q.C.
    $109.99
    Axle Tube for G.N. Q.C.
    x
                Note-Not IMCA Legal. 
            
  • Winters Light Quick Change
    From: $2,099.99
    Winters Light Quick Change
    x
                

    If you run at any of the Outlaw modified races you will need one of these Winters steel tubed quick changes. It is 60" wide with no offset and 4.86 gears on an aluminum spool.

    Choose bare as pictured or with 30.5" 31 splined axles, brake rotors, and 5 X 5" GN hubs.

    Replacement steel axle tubes and 31 spline axles are available if needed.

    • Thermal Coating
    • Magnesium Case
    • EDM Ring and Pinion
    • REM Finish
  • Winters Modified Quick Change Rear End
    From: $1,399.99
    Winters Modified Quick Change Rear End
    x
                

    If you run at any of the Outlaw modified races you will need one of these Winters steel tubed quick changes. It is 60" wide with no offset and 4.86 gears on an aluminum spool.

    Choose bare as pictured or with 30.5" 31 splined axles, brake rotors, and 5 X 5" GN hubs.

    Replacement steel axle tubes and 31 spline axles are available if needed.

  • Seals-It EAS1-05 Universal Inner Axle Seal for 2.5-2.75 Inch Tube
    Seals-It EAS1-05 Universal Inner Axle Seal for 2.5-2.75 Inch Tube
    x
                One size fits all! Fits any inner axle tube with an I.D. between 2-1/2" and 2-3/4". This eliminates ordering the wrong seal and allows you to always have the correct seal on hand. Typical applications* include Ford 9”, Quick change type rears, and 12 bolt GM. All seals are supplied with general installation guidelines. 
    • Inner Axle Seal I.D. = 7/8"
    • Axle sizes/Splines:  1-3/16” thru 1-1/2” / 28-31

     

    * Applications are reference only. Seals may be used on any rear end that is within the part number’s dimensional range. Rears can vary within a single model year and within the same model. Measure listed parameters before ordering.

  • Winters Sprint/Midget Rearend Nut for Quick Change Cover
    Winters Sprint/Midget Rearend Nut for Quick Change Cover
    x
                Use these aluminum rear cover nuts on your Winters rear ends. They are sold individually and feature an anodized red finish.
    • Aluminum rear cover nuts
    • Red anodize
    • Fit Winters rearends
    • Sold individually
  • Universal Quick Change Look Rear End Cover, Polished
    Universal Quick Change Look Rear End Cover, Polished
    x
                

    The great look of a 'Quick Change' rear end at a fraction of the price. Universal style that can be trimmed to fit any rear axle.

    Quick Change Rearend Cover Installation Instructions (pdf)

     

  • M&W SH-643-QC2 Micro Sprint Quick Change Sprocket Hub-6.43 bolt circle
    M&W SH-643-QC2 Micro Sprint Quick Change Sprocket Hub-6.43 bolt circle
    x
                
    • Allows for faster gear changes without the need for extra sprocket carriers
    • Includes chain guard
    • 6.43 quick change
    • For 2" Axle
  • Universal Quick Change Look Rear End Cover, Raw
    Universal Quick Change Look Rear End Cover, Raw
    x
                

    The great look of a 'Quick Change' rear end at a fraction of the price. Universal style that can be trimmed to fit any rear axle.

    916-47903 Instructions (pdf)

     

  • Quick Change Look 1963-82 Corvette Rearend Cover, Unpolished
    Quick Change Look 1963-82 Corvette Rearend Cover, Unpolished
    x
                

    Cast aluminum construction with an as-cast finish. Gives your rear the look of a Champ-style quick-change rear end. Flat mount design fits '63-'82 Corvette rear axle.

    Not for use with stock Vette spring.

  • AFCO 20406 Quick Change Torque Top Link Brackets
    AFCO 20406 Quick Change Torque Top Link Brackets
    x
                
    • "Forward Mount" design provides increased pull bar angle and forward bite during axle wrap-up and chassis lift over conventional mounting positions centered on axle
    • -8 Degree pinion angle allows torque link to be mount 4" ahead and 12" above axle centerline
    • Forward mounting reduces axle wrap-up from 25-33 percent, which provides consistant corner entry handling during axle wrap-down and improves U-joint life
    • Multiple holes for mounting torque link and dampener shock
    • 3/8" holes allow siffener braces to be added on high horsepower applications
    • Laser cut design fits most rear ends. (Some grinding of the side bell reinforcing ribs may be required to mount brackets)
  • Winters Performance Nostalgia V-8 Quickchange, Polished Housing
    Winters Performance Nostalgia V-8 Quickchange, Polished Housing
    x
                Finally an all new V-8 quick change that has steel side bells and tubes that accept modern axles. They are available in either plain finish or a polished center section that includes stainless steel fasteners. These rear ends are 56" from hub to hub and have both 5 on 4 1/2" and 5 on 4 3/4" bolt patterns. They accept the new style big Ford brakes with a 2 1/2" offset and the standard Spicer 1310 Chevy 3-1/4" u-joint. The 3.78 ring and pinion is mounted on a wedgelock differential and accepts common 6 spline quick change gears. 
            
  • Winters Performance SR2550STB SR2960 Nostalgia V8 Quickchange, Plain
    Winters Performance SR2550STB SR2960 Nostalgia V8 Quickchange, Plain
    x
                Finally an all new V8 quick change that has steel side bells and tubes that accept modern axles. They are available in either plain finish or a polished center section that includes stainless steel fasteners. These rear ends are 56" from hub to hub and have both 5 on 4 1/2" and 5 on 4 3/4" bolt patterns. They accept the new style big Ford brakes with a 2 1/2" offset and the standard Spicer 1310 Chevy 3-1/4" u-joint. The 3.78 ring and pinion is mounted on a wedgelock differential and accepts common 6 spline quick change gears. 
            
  • M&W Quick Change 27 Spline Sprocket Carrier & Chain Guard, 5.25 Inch
    M&W Quick Change 27 Spline Sprocket Carrier & Chain Guard, 5.25 Inch
    x
                

    These 27-spline quick change sprocket carriers allow faster gear changes without the need for extra sprocket carriers. Includes chain guards. 

     

    5.25" for Stallard, PMP, Hyper, RTS and others

     

  • M&W Quick Change 27 Spline Sprocket Carrier w/ Chain Guard, 6.438 Inch
    M&W Quick Change 27 Spline Sprocket Carrier w/ Chain Guard, 6.438 Inch
    x
                

    These 27-spline quick change sprocket carriers allow faster gear changes without the need for extra sprocket carriers. Includes chain guards. 

     

    6.438 Inch for Bailey, Factor One, Sawyer and others

     

  • Longacre 22568 Rear End Axle Breather Vent Kit, 1-3/4 Inch Tube Clamp
    Longacre 22568 Rear End Axle Breather Vent Kit, 1-3/4 Inch Tube Clamp
    x
                

    These Longacre billet rear-end breathers provide a convenient way to vent rear differentials, transmissions, and other components. They're easy to use--just clamp them on to a roll bar and no welding is required.

    • Tube clamp on design, no welding required
    • Includes vent, hardware, and hose for a quick professional installation
    • Differential Vent Thread Size (in):  0.125
    • Differential Vent Head Style:  Round
    • Differential Vent Material:  Steel/Rubber
    • Differential Vent Finish:  Chrome
    • This bracket mounts to 1-3/4 in. round bar.
  • Longacre 22569 Rear End Axle Breather Vent Kit, 1-1/2 Inch Tube Clamp
    Longacre 22569 Rear End Axle Breather Vent Kit, 1-1/2 Inch Tube Clamp
    x
                

    These Longacre billet rear-end breathers provide a convenient way to vent rear differentials, transmissions, and other components. They're easy to use--just clamp them on to a roll bar and no welding is required.

    • 1/4" NPT
    • Clamp on design, no welding required
    • Includes vent, hardware, and hose for a quick professional installation
    • Differential Vent Thread Size (in):  0.125
    • Differential Vent Head Style:  Round
    • Differential Vent Material:  Steel/Rubber
    • Differential Vent Finish:  Chrome
    • This bracket mounts to 1-1/2 in. round bar.
  • Halibrand V8 Quick Change Rear Cover Plate
    Halibrand V8 Quick Change Rear Cover Plate
    x
                We found a limited supply of these rare Halibrand V8 quick change parts. This rear cover plate is machined for bearings to press in and use on a quick change rear end.

    Click to See Application Chart (Link)

  • Ring & Pinion Gears for Halibrand Quick Change, 3.54 Gear Ratio
    Ring & Pinion Gears for Halibrand Quick Change, 3.54 Gear Ratio
    x
                

    Highest quality replacement gear set made. Fits all 6-spline Halibrand V8 quick changes.

  • Direct Fit Tribute T Driveshaft Kit for C-4 Transmission w/ Quick Change
    New
    Direct Fit Tribute T Driveshaft Kit for C-4 Transmission w/ Quick Change
    x
                Use these driveshaft kits to complete your Tribute-T drivetrain.  They  are specifically designed for use with C-4 transmissions and quick change  rear ends.
    • Direct fit driveshaft kit for Tribute-T
    • Designed for kits using a C-4 transmission and quick change rear end
    Kit includes:
    • U-joints, clips
    • Driveshaft
    • Transmission yoke
  • Longacre 22564 Rear End Axle Breather Vent, 1-3/4 Inch, Breather Only
    Longacre 22564 Rear End Axle Breather Vent, 1-3/4 Inch, Breather Only
    x
                

    These Longacre billet rear-end breathers provide a convenient way to vent rear differentials, transmissions, and other components. They're easy to use--just clamp them on to a roll bar and no welding is required.

    • Breather Only
    • Clamp on design, no welding required
    • Differential Vent Thread Size (in):  0.125
    • Differential Vent Head Style:  Round
    • Differential Vent Material:  Steel/Rubber
    • Differential Vent Finish:  Chrome
    • This bracket mounts to 1-3/4 in. round bar.
  • Longacre 22566 Rear End Axle Breather Vent, 1-1/2 Inch, Breather Only
    Longacre 22566 Rear End Axle Breather Vent, 1-1/2 Inch, Breather Only
    x
                

    These Longacre billet rear-end breathers provide a convenient way to vent rear differentials, transmissions, and other components. They're easy to use--just clamp them on to a roll bar and no welding is required.

    • Breather Only
    • Clamp on design, no welding required
    • Differential Vent Thread Size (in):  0.125
    • Differential Vent Head Style:  Round
    • Differential Vent Material:  Steel/Rubber
    • Differential Vent Finish:  Chrome
    • This bracket mounts to 1-1/2 in. round bar.
  • Trailer Quick Jack
    $24.99
    Product Rating: 4.67 Stars
    Trailer Quick Jack
    x
                A fast, safe and easy way to change a flat. Simply ride the good tire onto the jack and change your flat, which is now off the ground.  Features no-slip traction strips and a wide tire center area. 27" long, 7" wide and 4-1/2" high.
            
Goto Previous PagePrevious Page
1 2 3 4 5