Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"pump small block chevy" Page 1 of 10

  • Moroso 63510 Water Pump Spacer Small Block Chevy & 90 Degree V6
    Moroso 63510 Water Pump Spacer Small Block Chevy & 90 Degree V6
    x
                

    Convert '55-'68 Small Block Chevy water pumps to the longer, late model design. Bolts included. Spacers are 1-1/4" thick.

    Learn more about using different water pump accessories to best fit your application by reading our tech article.  SBC - Short vs Long Water Pump.

  • Zips Small Block Chevy Water Pump Riser
    Zips Small Block Chevy Water Pump Riser
    x
                
    • Water pump riser solves the common problem of the fan being mounted too low on the radiator to be effective
    • Raises the pump and mechanical fan 5" higher in the engine compartment
    • Provides mounting surfaces for an A/C compressor and alternator
    • Riser housing comes with brackets and hardware
    • Water pump not included (use Chevy 250 L6 water pump)

    910-2306 Instructions (PDF)

    Learn more about using different water pump accessories to best fit your application by reading our tech article.  SBC - Short vs Long Water Pump.

  • Speedway 1:1 Pulley Combo, Small Block Chevy Short Pump
    Speedway 1:1 Pulley Combo, Small Block Chevy Short Pump
    x
                

    Kit includes a cast aluminum double groove water pump pulley and double groove crank pulley, and a matched pair of heavy duty belts. Has a 1:1 water pump/crankshaft speed ratio.

    Fits Small Block Chevy V8 with '55-'68 short-style water pump with either a 5/8" or 3/4" shaft.

    Note: The lower crank pulleys in our combo kits are manufactured thicker than normal stock pulleys.  This requires longer 3/8" bolts to be purchased separately.  Allen head type bolts recommended.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    x
                

    Billet Specialties Tru Trac serpentine systems for Small Block Chevy come complete with all attaching hardware and a comprehensive installation manual.

    • Polished 105 amp Powermaster 1-wire alternator
    • Cast finish Edelbrock reverse rotation water pump
    • Polished Sanden SD-7 compressor
    • Cast finish Maval power steering pump w/ AN fittings
    • All pulleys and brackets completely polished
    • Polished ARP 12-point stainless steel hardware
    • Goodyear Gatorback 6-rib serpentine belt

    Note: Requires the use of a remote power steering fluid reservoir. Vehicles that use front style motor mounts must be converted to side motor mounts when using the Tru Trac system.

    Small Block Chevy Serpentine System Installation Instructions (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • Mr. Gasket 1514 Chrome Fuel Pump Mounting Plate, Small Block Chevy
    Mr. Gasket 1514 Chrome Fuel Pump Mounting Plate, Small Block Chevy
    x
                

    Mr.Gasket announces a fuel pump mounting plate to dress up the fuel pump area of your engine. This chrome plated mounting plate, for the 265-400 cu. in. Chevrolet small block engine, is ideal for mounting a stock OEM pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.

    • Quality chrome finish
    • Fits 265-400 SBC engines
    • Mounts stock OEM pump
    • Includes gasket
  • Small Block Chevy Power Steering Pump Bracket
    Small Block Chevy Power Steering Pump Bracket
    x
                

    This power steering pump bracket mounts a stock-style GM pump to a S/B Chevy block. Must be used with a short style water pump. Mounts on the lower left side. Bracket is zinc plated with threaded shaft. Designed to work with a '70-'82 GM pump that has a threaded pulley shaft, not a press-on style.

    Works with bolt-on or press-on pulleys with a mount spacing of 3.75". Due to the variety of pulley configurations, it is likely that you will have to space the pump/bracket for belt alignment.

    Note: This will NOT work when used on early 1970's Chevelle/Camaro chassis with a steering box.

  • Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    x
                Please view the product's page for more information
            
  • 1955-68 Small Block Chevy Single Groove Upper Pulley, Short Water Pump
    1955-68 Small Block Chevy Single Groove Upper Pulley, Short Water Pump
    x
                

    These upper pulleys for 1955-68 short water pumps feature a single groove with a beautiful chrome finish.  They will work with 283-350 V8 small block Chevy engines.  Sitting flat on the workbench, the pulley is 2-3/4" high in the center at the water pump.

    • Upper pulley
    • 1955-68 283-350 V8 small block Chevy engine
    • Short water pumps
    • Single groove  
    • 7-1/8" Diameter
    • Chrome plated finish

    Note:  These upper pulleys will not work with our lower pulley (91015424).  Use our lower pulley (91015422) to correspond for proper alignment with these upper pulleys.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

  • 1955-68 Small Block Chevy Single Groove Lower Pulley, Short Water Pump
    1955-68 Small Block Chevy Single Groove Lower Pulley, Short Water Pump
    x
                

    These lower pulleys for 1955-68 short water pumps feature a single groove with a beautiful chrome finish.  They will work with 283-350 V8 small block Chevy engines. 

    • Lower pulley
    • 1955-68 283-350 V8 small block Chevy engine
    • Short water pumps
    • Single groove  
    • 6-3/4" Diameter
    • Chrome plated finish

    Note: Use our upper pulley (91015421) to correspond for proper alignment with these lower pulleys.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

     

  • Speedway 30% Reduction Pulley Combo for S/B Chevy Short Pump
    Speedway 30% Reduction Pulley Combo for S/B Chevy Short Pump
    x
                

    Kit includes a cast aluminum double groove cast aluminum water pump pulley, crank pulley, and a matched pair of heavy duty belts. Slows water pump speed by 30% for increased horsepower.

    Fits Small Block Chevy V8 with '55-'68 short-style water pump with 5/8" shaft.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

  • Small Block Chevy Oil Pump Shaft
    Small Block Chevy Oil Pump Shaft
    x
                Use these oil pump shafts to upgrade the weak link in any wet sump system. With steel sleeve. Works with stock or high volume pumps.
            
  • Small Block Chevy Water Pump Gasket
    Small Block Chevy Water Pump Gasket
    x
                

    Small Block Chevy Water Pump Gaskets

    • Paper
    • 0.03" thick
  • Speedway Small Block Chevy Stainless Engine Bolt Kit
    Speedway Small Block Chevy Stainless Engine Bolt Kit
    x
                

    This complete Allen head stainless steel engine fastener kit will resist corrosion caused by extreme under-hood environments, all while dressing up your engine. Fits '55-'86 Small Block Chevy engines.

    Kit includes:

    • Intake manifold bolts
    • Timing cover bolts
    • Oil pan bolts
    • Short water pump bolts
    • Long water pump bolts
    • TH350/400 transmission pan bolts
    • Exhaust header bolts
    • Water neck bolts, 1955-1965
    • Water neck bolts, 1966-1986
    • Flywheel cover bolts
  • Small Block Chevy Fuel Pump Block Off Plate, Chrome
    Small Block Chevy Fuel Pump Block Off Plate, Chrome
    x
                Chrome plated steel fuel pump block off plate for 1955-83 S/B Chevy.
            
  • Small Block Chevy Deluxe Oil Pump Primer
    Small Block Chevy Deluxe Oil Pump Primer
    x
                

    Strong and Durable S/B Chevy oil pump primer. Features a special bushing to allow the lifters to be lubed.

  • ARP Fasteners 230-7001 Small Block Chevy Oil Pump Studs
    ARP Fasteners 230-7001 Small Block Chevy Oil Pump Studs
    x
                For S/B Chevy only. Heat treated Chromoly steel. Comes with grade 8 nut and heat treated washer.
            
  • Hy-Lube Small Block Chevy Oil Pump Block-Off Plate
    Hy-Lube Small Block Chevy Oil Pump Block-Off Plate
    x
                

    When running a dry sump oil system on your Small Block Chevy you should use this block-off plate on the rear main cap cover of the oil gallery.

    • Simulates torque loading
    • Anodized for protection
    • Hardware included
  • KRC KRC40400360 Adjustable Idler/Tensioner Assembly, Small Block Chevy
    KRC KRC40400360 Adjustable Idler/Tensioner Assembly, Small Block Chevy
    x
                

    KRC's adjustable idler - tensioner is used to keep proper belt tension and prevent belt slippage when using a mechanical fan. This can occur on both single drive belt and pulley systems that have a steering pump mounted of the front of an engine.

    KRC's idler tensioner is essential on dirt cars. Belt slippage can occur on cars that exceed 7,000 RPM and/or use a large or heavy fixed fan blade or a fan blade with a lot of pitch, which potentially causes overheating & pulleys to wear faster. This occurs on both single drive belt and pulley systems with a power steering pump mounted on the front of the engine. 

    Fan belts and pulleys work to slow down the fan. The belt slips because it is stretching to slow the fan. The belt heats up as the the the stretching increases. The only way to properly tension the belt is with an adjustable idler/tensioner. This keeps the engine running cooler because the belt is tighter. This will allow faster acceleration out of turns and harder braking on corners.

    • Designed for GM 602 & 604 Crate Engines
    • Use with KRC serpentine drive systems
    • Assembly contains:
      • Idler - Tensioner
      • Hardware and Instructions

     

     

  • Holley 12-834 1958-1976 Small Block Chevy Street Fuel Pump
    Holley 12-834 1958-1976 Small Block Chevy Street Fuel Pump
    x
                

    These all-new (not rebuilt) mechanical fuel pumps from Holley have a 7-1/2 psi shut-off pressure and deliver 80 GPH. The adjustable lower housing permits fuel ports (1/4" NPT) to be rotated for best fuel line access. Pump fittings not included and offered separately. These pumps are a flash chrome and not show quality.

    • High Output Fuel Flow
    • Flows 80 GPH Free Flow
    • Shutoff Pressure Pre-set 7.5 PSI
    • Fuel Pressure Regulator is Not Required
    • Heavy Duty Construction For Continuous High RPM Operation
    • Fuel Body Casting Can Be Rotated to Accommodate Various Plumbing Situations
    • Inlet & Outlet Tapped For 1/4" NPT

    Holley Pump Tech Info (PDF)

  • Small Block Chevy Aluminum Double Upper Pulley, Short Pump
    Small Block Chevy Aluminum Double Upper Pulley, Short Pump
    x
                Cast aluminum double groove V-belt pulley for '55-'68 Small Block Chevy short style water pumps. Fits over 5/8" water pump snout, but can be drilled out to 3/4" if needed. 
    • Precision machined aluminum construction
    • Lightweight and strong
    • Double grooves for two V-belts

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
    Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
    x
                

    Thse high-volume oil pumps move 25% more volume than stock volume oil pumps. Pumps are preset to 55-65 psi. Fits Small Block Chevy.

  • Small Block Chevy Aluminum Triple Lower Pulley, Short Pump
    Small Block Chevy Aluminum Triple Lower Pulley, Short Pump
    x
                

    Cast aluminum 3-groove V-belt crankshaft pulley for use with '55-'68 Small Block Chevy short style water pumps.

    • Precision machined aluminum construction
    • Lightweight and strong
    • Three grooves for 3 V-belts

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • Small Block Chevy Fuel Pump Seals
    Small Block Chevy Fuel Pump Seals
    x
                

    This seal was originally developed to contain lubrication inside the fuel pump cavity in order to lubricate the pump arm, but it also allows the pump to deliver cooler fuel to the carburetor. Uses a molded neoprene seal bonded to an alloy plate to seal around the pump arm. A special insulating gasket and sleeved, insulated bolts also cut down on the engine heat transferred to the pump to further reduce fuel temperature. 

    • 91011853-Hol
      • Fits old style Holley/Edelbrock pumps w/ 1/2" NPT ports on opposite end
    • 91011853-Car
      • Fits new style Holley/Carter fuel pumps
  • Small Block Chevy Claimer Oil Pan w/ Plug Combo, Hi-Vol. Pump, LH Dipstick
    Small Block Chevy Claimer Oil Pan w/ Plug Combo, Hi-Vol. Pump, LH Dipstick
    x
                

    Save money with our Claimer Pan Combos! For Small Block Chevy 1955-79 (driver side dipstick). Meets 2011 IMCA rules. Will not fit rear steer cars unless the engine has been moved back. Works with stock or mini starters.

    Kits include:

    • Claimer Oil Pan with 1" inspection plug (6 quart, 7-1/4" deep)
    • Oil Pump Pickup, 5/8" diameter 
    • High Volume Pump (55-65 psi preset)
  • Reduction Pulley Combo for Small Block Chevy Long Pump
    Reduction Pulley Combo for Small Block Chevy Long Pump
    x
                

    Combo includes cast aluminum double-groove aluminum water pump pulley, crank pulley, and matched pair of heavy duty belts. Slows water pump speed by 20% for increased horsepower.

    For Small Block Chevy V8s with '69-'86 long style water pumps with 5/8" shaft.

    Note: The lower crank pulleys in our combo kits are manufactured thicker than normal stock pulleys.  This requires longer 3/8" bolts to be purchased separately.  Allen head type bolts recommended.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • Small Block Chevy Inboard Drive Kits, Alternator
    Small Block Chevy Inboard Drive Kits, Alternator
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. 

    Inboard (high) mount brackets for early cars.

    Alternator only kits include single groove pulleys.

    Note: S/B Chevy, short style water pump only.

  • Moroso 26150 Chevy Distributor Shim Kit
    Moroso 26150 Chevy Distributor Shim Kit
    x
                

    Eliminates oil pump bind and spark scatter when using a distributor in an engine with milled heads or decks. Shims fit between the intake manifold and your distributor allowing you to properly set gear mesh. Made from leak-free, high impact nylon.

    • Eliminates oil pump bind and spark scatter 
    • Prevents wiping out your distributor gear
    • Made from high impact nylon to exact GM gasket specs
    • Kit contains 3 sizes; .030", .060" & .100"
  • Small Block Chevy Performance Aluminum Water Pump, Short
    Small Block Chevy Performance Aluminum Water Pump, Short
    x
                Each pump is manufactured from T6 aluminum and features an impeller with curved vanes for maximum flow, pressure and equal distribution to both sides of the block. It also features a unique seal assembly for leak proof operation. 
    • 3/4" shaft with 5/8" fan pilot snout
    • 1/2" NPT hole on passenger side (for heater hose) and on top (for bypass hose)
    • Stamped steel rear plate
    • Extra thick fan hub
    • 3/4" ultra duty bearings
    • Adjustable cam stop
    • State of the art aluminum castings
    • Equal flow to both cylinder banks
    • Precision impeller
    • Higher flow rate and pressure rate
    • Weighs 6 lbs.
    • Does not have a set screw retaining the fan hub

    NOTE: This pump is designed for street use and is not to be run on a motor which exceeds 5,500 RPM. 

    910-15580 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.  

  • Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Attaches to the lower left front of the block using the two lower bolt holes located by the timing cover (the old front motor mount holes). The adjusting arm mounts to the lower water pump hole.

    • Mounts low on driver's side
    • Two positions for superior adjustability 
    • Works with short or long style water pumps
    • Use with GM Saginaw pumps with attached reservoir, "type 1" p.s. pumps
    • Works with stock steel or aluminum aftermarket pulleys
    • Choose black or chrome finish

    Power Steering Tech Questions/Tips (Link)

    Power Steering Application Tech Questions/Tips (Link)

  • Small Block Chevy Inboard Drive Kits, Alternator & AC
    Small Block Chevy Inboard Drive Kits, Alternator & AC
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. 

    Inboard (high) mount brackets for early cars.

    Alternator and A/C kits include dual groove pulleys.

    Bracket kit works with dual quad & 3-2 low rise intakes.

    Note: S/B Chevy, short style water pump only.

  • Moroso 65750 Lightweight Fuel Pump Pushrod
    Moroso 65750 Lightweight Fuel Pump Pushrod
    x
                

    This lightweight fuel pump push rod helps prevent fuel pump arm float at high RPM and subsequent fuel starvation. Fits both Small Block Chevy (SBC) and Big Block Chevy (BBC).

    • For use in Drag, Oval Track and Street-Performance applications

     

  • Small Block Chevy Billet Aluminum Water Pump Pulley, 6-7/8 Inch O.D.
    Small Block Chevy Billet Aluminum Water Pump Pulley, 6-7/8 Inch O.D.
    x
                

    Speedway Billet Aluminum double groove pulleys for small block Chevy feature a 30% reduction. Reduction pulleys have a smaller diameter which slows the speed of your fan, water pump, and alternator to reduce drag for more top-end horsepower. Plus, high RPM water pump operation is improved due to reduced fluid cavitation.

    • High strength billet aluminum construction
    • Superior belt retention with extra-deep grooves
    • 30% reduction slows accessories down for less drag
    • Adds top-end horsepower
    • Reduces water pump impeller speed below cavitation threshold
    • Improved high-RPM cooling capabilities

    Fits short style pumps ('55-'68) or long style pumps ('69-'86). Fits a 5/8" shaft.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

  • KRC KIT16312615 Serpentine Drive Kit-S/B Chevy, Block Mt. w/o P.S Pump
    KRC KIT16312615 Serpentine Drive Kit-S/B Chevy, Block Mt. w/o P.S Pump
    x
                

    KRC's basic kits are the perfect starting point for your GM 602 & 604 Crate Engines. Select the kit with the options that suit your application, then choose the appropriate accessory to complete your kit.

    • Complete basic crate engine kit
    • Designed for GM 602 & 604 Crate Engines
    • Assembly contains:
      • Aluminum driver side lower block mounted power steering pump bracket
      • Pro series pulley kit
      • KRC high performance water pump
      • Water pump spacers
      • Hardware and detailed instructions

    Serpentine Pulley Offset (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • Small Block Chevy Short Heavy Duty Aluminum Water Pump
    Small Block Chevy Short Heavy Duty Aluminum Water Pump
    x
                This super heavy duty race water pump features additional casting designs for more strength and reinforcement, plus a 3/4" fan pilot shaft and super duty bearing. It has 1/2" NPT threaded outlets on both the top and side, plus a 3/16" steel rear plate. It weighs 7-3/4 lbs.
    • 3/4" fan snout
    • Extra thick fan hub
    • 3/4" ultra duty bearings
    • Threaded for adjustable cam stop
    • State of the art aluminum castings
    • Equal flow to both cylinder banks
    • Precision impeller
    • Higher flow and pressure

    910-15581 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.  

  • Speedway 1:1 Pulley Combo for Small Block Chevy Long Water Pump
    Speedway 1:1 Pulley Combo for Small Block Chevy Long Water Pump
    x
                

    Kit includes a cast aluminum double groove water pump pulley and double groove crank pulley, and a matched pair of heavy duty belts. Has a 1:1 water pump/crankshaft speed ratio.

    Fits Small Block Chevy V8 with '69-'86 long-style water pump.

    Note: The lower crank pulleys in our combo kits are manufactured thicker than normal stock pulleys.  This requires longer 3/8" bolts to be purchased separately.  Allen head type bolts recommended.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

     

  • C&S Specialties Small Block Chevy Alcohol Fuel Pump
    C&S Specialties Small Block Chevy Alcohol Fuel Pump
    x
                

    C&S Specialties has addressed all problem areas of previous 6-valve pumps in designing their rugged Tool Steel mechanical fuel pumps. This exclusive casting design adds material in 7 places to eliminate cracking, breakage, waviness and leakage. Plus, six High Flow pumping valves, combined with internal porting, are proven to deliver twice the fuel flow over other 6-valve alcohol pumps.

    • Unique baked-on coating to resist corrosion
    • Unique stepped diaphragm reduces stress and increases life
    • Two stainless steel springs instead of one increases reliability
    • CNC milled pump arm from tool steel, not stamped steel
    • Pump arm bushing made from tool steel
    • Pump shaft also made of tool steel, not stamped steel
    • 1/2" NPT inlet and outlet
  • Holley 12-327-13 Small Block Chevy Racing Mechanical Fuel Pump-130 GPH
    Holley 12-327-13 Small Block Chevy Racing Mechanical Fuel Pump-130 GPH
    x
                

    If you are looking for a high flow fuel pump you can depend on night after night, this is it! Holley's high output, heavy duty mechanical fuel pumps are constructed of rugged materials and feature fuel body castings that can be rotated to accommodate various plumbing situations. 3/8" NPT inlet and outlet.

    For use with gasoline only. NOT for use with alcohol.

    • High output fuel flow
    • Heavy duty construction for continuous high RPM performance
    • Six high flow valves ensure adequate and continuous fuel flow
    • Extra beefy steel rocker arm to help withstand severe race usage
    • Inlet & outlet tapped for 3/8" NPT

    Holley Pump Tech Info (PDF)

  • 1969-85 Chevy Long Water Pump Nose Cover
    1969-85 Chevy Long Water Pump Nose Cover
    x
                

    Billet aluminum nose cover for 1969-85 small block Chevy long water pumps.

    Learn more about using different water pump accessories to best fit your application by reading our tech article.  SBC - Short vs Long Water Pump.   

  • KRC KRC16312115 Serpentine Drive Kit, S/B Chevy, Block Mt Pump w/ Tank
    KRC KRC16312115 Serpentine Drive Kit, S/B Chevy, Block Mt Pump w/ Tank
    x
                Please view the product's page for more information
            
  • King Chrome Short Water Pump for 1955-1968 Small Block Chevy
    King Chrome Short Water Pump for 1955-1968 Small Block Chevy
    x
                

    These 1955-1968 Small Block Chevy (SBC) King Chrome short leg water pumps are made from OEM castings. Polished to a higher standard and beautifully chrome plated. Built from NEW components.

    • Standard volume pump, OEM style flow
    • Includes a 3/4” NPT allen head chrome plug for the top port
    • Includes a 5/8” chrome hose nipple for the passenger side port
    • Mounted length: 6"
    • Hose I.D.: 1.81"
    • Shaft Diameter: .63"
    • Shaft Length: .38"
    • Gaskets Included
    • Chrome plated cast iron
    • Weight: 8.05 lbs
    • Clearance from back of pump to engine block mount is .88"
    • This product has a 1 year warranty from date of purchase

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump

Goto Previous PagePrevious Page
1 2 3 4 5 ... 10