Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"pro front springs" Page 1 of 2

  • QA1 64-67 A-Body/55-57 Chevy Front Coilover Kit
    QA1 64-67 A-Body/55-57 Chevy Front Coilover Kit
    x
                

    Don't you wish you had adjustable coil-overs on the front of your classic car to vary the ride height and road feel? This QA1 Pro Coil Adjustable Front Coil-Over Conversion Kit will do just that for you. You get two adjustable coilover shock assemblies that have a single knob with 18 valving options and two coil springs.

    • Easy Bolt-In Installation
      • Minimal modifications to be made
      • Remove the existing shocks and springs and the QA1 Pro Coil System bolts right back in.
    • Specialty Designed Conical Springs
      • Springs designed so that the lower end sits on the coil-over shock and the upper end sets in the original spring bucket in the frame
      • Allows for a longer, lighter spring for more stored energy, offering increased weight transfer
      • Greater durability by locating the spring pressure in the frame and not on a single stud
    • Ride Height Adjustable
      • Threaded aluminum body allows easy ride height adjustment
    • QA1 Pro Coil shocks are revalveable and rebuildable by QA1 Authorized Service Centers

    Choose 350 lb., 450lb. or 550 lb. rate springs.

     

  • Eibach Springs 3852.120 Eibach Front Springs 1970-81 Camaro
    Eibach Springs 3852.120 Eibach Front Springs 1970-81 Camaro
    x
                

    The Eibach Pro-Kit is the perfect answer for most frequently-driven street cars. This legendary spring system dramatically improves both performance and appearance.

    Pro-Kit lowers your cars center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with high performance wheels and tires, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender-well clearance, making your car look just as hot as it performs.

    Every Eibach Pro-Kit is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level.

    • High Performance Handling and Aggressive Good Looks
    • Lower Center of Gravity -- Lowers Vehicle 1.0" 
    • Stop Quicker, Corner Faster and get Better MPG
    • Progressive Spring Design for Excellent Ride Quality
    • Million Mile Manufacturers Warranty
  • Eibach Springs 3848.120 1967-69 Camaro Front Springs, 1 Inch Drop
    Eibach Springs 3848.120 1967-69 Camaro Front Springs, 1 Inch Drop
    x
                

    The Eibach Pro-Kit is the perfect answer for most frequently-driven street cars. This legendary spring system dramatically improves both performance and appearance. Pro-Kit lowers your cars center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with high performance wheels and tires, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender-well clearance, making your car look just as hot as it performs.

    Every Eibach Pro-Kit is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level.

    • High Performance Handling and Aggressive Good Looks
    • Lower Center of Gravity
    • Lowers Vehicle 1.0" 
    • Stop Quicker, Corner Faster and get Better MPG
    • Progressive Spring Design for Excellent Ride Quality
    • Million Mile Manufacturers Warranty
  • QA1 1970-81 Camaro/Firebird Front Coilovers
    QA1 1970-81 Camaro/Firebird Front Coilovers
    x
                

    Don't you wish you had adjustable coil-overs on the front of your classic car to vary the ride height and road feel? This QA1 Pro Coil Adjustable Front Coil-Over Conversion Kit will do just that for you. You get two adjustable coilover shock assemblies that have a single knob with 24 valving options and two coil springs.

    • Easy Bolt-In Installation
      • Minimal modifications to be made
      • Remove the existing shocks and springs and the QA1 Pro Coil System bolts right back in.
    • Specialty Designed Conical Springs
      • Springs designed so that the lower end sits on the coil-over shock and the upper end sets in the original spring bucket in the frame
      • Allows for a longer, lighter spring for more stored energy, offering increased weight transfer
      • Greater durability by locating the spring pressure in the frame and not on a single stud
    • Ride Height Adjustable
      • Threaded aluminum body allows easy ride height adjustment
    • QA1 Pro Coil shocks are revalveable and rebuildable by QA1 Authorized Service Centers

    Choose 350 lb., 450lb. or 550 lb. rate springs.

  • Pro Shocks C200/SR375 Coilover Front Shock Conversion Kit, 1964-74 GM
    Pro Shocks C200/SR375 Coilover Front Shock Conversion Kit, 1964-74 GM
    x
                

    Pro Coilover conversion kits feature a steel-body coilover front shock which bolts directly in place of your factory front shock. Requires no welding, cutting or modifications to your original frame. Sold as a PAIR.

    Fits the following applications:

    • Skylark '64-'67
    • Camaro '67-'69
    • El Camino/Chevelle'64-'67
    • Nova/Chevy II '68-'74
    • Corvette '63-'82
    • Cutlass '64-'67
    • Omega '73-'74
    • Firebird '67-'69
    • LeMans/GTO/Tempest '64-'72
  • QA1 1967-74 GM Front Coil-Over Kit
    QA1 1967-74 GM Front Coil-Over Kit
    x
                

    Don't you wish you had adjustable coil-overs on the front of your classic car to vary the ride height and road feel? This QA1 Pro Coil Adjustable Front Coil-Over Conversion Kit will do just that for you. You get two adjustable coilover shock assemblies that have a single knob with 18 valving options and two coil springs. 

    Choose 350 lb., 450lb. or 550 lb. rate springs.

    • Easy bolt-in installation
    • Remove the existing shocks and springs and the QA1 Pro Coil System bolts right back in
    • Springs designed so that the lower end sits on the coil-over shock and the upper end sets in the original spring bucket in the frame
    • Allows for a longer, lighter spring for more stored energy, offering increased weight transfer
    • Greater durability by locating the spring pressure in the frame and not on a single stud
    • Threaded aluminum body allows easy ride height adjustment
    • QA1 Pro Coil shocks are revalveable and rebuildable by QA1 Authorized Service Centers
    Fits
    • 1967-69 Camaro/Firebird
    • 1968-74 Nova 
  • QA1 1974-77 GM A/G/X Front Coilovers
    QA1 1974-77 GM A/G/X Front Coilovers
    x
                

    Don't you wish you had adjustable coil-overs on the front of your classic car to vary the ride height and road feel? This QA1 Pro Coil Adjustable Front Coil-Over Conversion Kit will do just that for you. You get two adjustable coilover shock assemblies that have a single knob with 24 valving options and two coil springs.

    • Easy Bolt-In Installation
      • Minimal modifications to be made
      • Remove the existing shocks and springs and the QA1 Pro Coil System bolts right back in.
    • Specialty Designed Conical Springs
      • Springs designed so that the lower end sits on the coil-over shock and the upper end sets in the original spring bucket in the frame
      • Allows for a longer, lighter spring for more stored energy, offering increased weight transfer
      • Greater durability by locating the spring pressure in the frame and not on a single stud
    • Ride Height Adjustable
      • Threaded aluminum body allows easy ride height adjustment
    • QA1 Pro Coil shocks are revalveable and rebuildable by QA1 Authorized Service Centers

    Choose 350 lb., 450lb. or 550 lb. rate springs.

  • QA1 1968-72 Chevelle A-Body Front Coilover Kit
    QA1 1968-72 Chevelle A-Body Front Coilover Kit
    x
                

    Don't you wish you had adjustable coil-overs on the front of your classic car to vary the ride height and road feel? This QA1 Pro Coil Adjustable Front Coil-Over Conversion Kit will do just that for you. You get two adjustable coilover shock assemblies that have a single knob with 24 valving options and two coil springs.

    • Easy Bolt-In Installation
      • Minimal modifications to be made
      • Remove the existing shocks and springs and the QA1 Pro Coil System bolts right back in.
    • Specialty Designed Conical Springs
      • Springs designed so that the lower end sits on the coil-over shock and the upper end sets in the original spring bucket in the frame
      • Allows for a longer, lighter spring for more stored energy, offering increased weight transfer
      • Greater durability by locating the spring pressure in the frame and not on a single stud
    • Ride Height Adjustable
      • Threaded aluminum body allows easy ride height adjustment
    • QA1 Pro Coil shocks are revalveable and rebuildable by QA1 Authorized Service Centers

    Choose 350 lb., 450lb. or 550 lb. rate springs.

  • Pro Shocks C250/GM300 1955-1957 S/B Chevy V8 Front Coilover Conversion
    Pro Shocks C250/GM300 1955-1957 S/B Chevy V8 Front Coilover Conversion
    x
                

    Pro Coilover conversion kits feature a steel-body coilover front shock which bolts directly in place of your factory front shock. Requires no welding, cutting or modifications to your original Tri-Five Chevy frame.

    Sold as a PAIR.

  • Eibach Springs 3856.140 1968-72 Chevelle Pro-Kit Lowering Spring Set
    Eibach Springs 3856.140 1968-72 Chevelle Pro-Kit Lowering Spring Set
    x
                

    The Eibach Pro-Kit is the perfect answer for most frequently-driven street cars. This legendary spring system dramatically improves both performance and appearance.

    Pro-Kit lowers your cars center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with high performance wheels and tires, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender-well clearance, making your car look just as hot as it performs.

    Every Eibach Pro-Kit is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level.

    • High Performance Handling and Aggressive Good Looks
    • Lower Center of Gravity -- Lowers Vehicle 1.3" Front and Rear
    • Stop Quicker, Corner Faster and get Better MPG
    • Progressive Spring Design for Excellent Ride Quality
    • Million Mile Manufacturers Warranty
  • Eibach Springs 3855.140 1964-67 Chevelle Pro-Kit Lowering Spring Set
    Eibach Springs 3855.140 1964-67 Chevelle Pro-Kit Lowering Spring Set
    x
                

    The Eibach Pro-Kit is the perfect answer for most frequently-driven street cars. This legendary spring system dramatically improves both performance and appearance.

    Pro-Kit lowers your cars center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with high performance wheels and tires, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender-well clearance, making your car look just as hot as it performs.

    Every Eibach Pro-Kit is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level.

    • High Performance Handling and Aggressive Good Looks
    • Lower Center of Gravity -- Lowers Vehicle 1.3" Front, 1.0" Rear
    • Stop Quicker, Corner Faster and get Better MPG
    • Progressive Spring Design for Excellent Ride Quality
    • Million Mile Manufacturers Warranty
  • AFCO 3870CF Pro Touring Double Adjustable Front Shock
    AFCO 3870CF Pro Touring Double Adjustable Front Shock
    x
                

    AFCO Pro Touring Shocks provide high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    Rear axle shocks for 1973 Chevy Nova w/ Non-H.D. Rear (mounting point modifications may be needed). Note: The parts are described as "front" shocks, but they are indeed intended for 1973 Nova "rear".    

    • 7" Stroke - 13.90" Comp - 20.90" Ext
    • 15.50"-18.50" Shock eye-to-eye Length @ Ride Height
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    For application information see Application tab.

     

  • AFCO 3875CF Pro Touring Single Adjustable Front Shock
    AFCO 3875CF Pro Touring Single Adjustable Front Shock
    x
                

    AFCO Pro Touring Shocks provide high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    Rear axle shocks for 1973 Chevy Nova w/ Non-H.D. Rear (mounting point modifications may be needed). Note: The parts are described as "front" shocks, but they are indeed intended for 1973 Nova "rear".    

    • 7" Stroke - 13.90" Comp - 20.90" Ext
    • 15.50"-18.50" Shock eye-to-eye Length @ Ride Height
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    For application information see Application tab.

     

  • AFCO 3865CM Dodge/Plymouth Pro Single Adj. Front Shock, A/B/E Body
    AFCO 3865CM Dodge/Plymouth Pro Single Adj. Front Shock, A/B/E Body
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Can be converted to coil-over with kit
    • Factory Dyno Tested for performance
    • Made in the USA

    See Application tab for chassis fittment. 

  • AFCO 3855CM Dodge/Plymouth Pro Single Adj Front Shock, A/B/C Body
    AFCO 3855CM Dodge/Plymouth Pro Single Adj Front Shock, A/B/C Body
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Can be converted to coil-over with kit
    • Factory Dyno Tested for performance
    • Made in the USA

    See Application tab for chassis fittment. 

  • AFCO 3850CM Dodge/Plymouth Pro Double Adj. Front Shock, A/B/C Body
    AFCO 3850CM Dodge/Plymouth Pro Double Adj. Front Shock, A/B/C Body
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Can be converted to coil-over with kit
    • Factory Dyno Tested for performance
    • Made in the USA

    See Application tab for chassis fittment. 

  • AFCO 3850CF 62-67 Chevy Nova Pro Touring Double Adjustable Front Shock
    AFCO 3850CF 62-67 Chevy Nova Pro Touring Double Adjustable Front Shock
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for your Chevy II. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    Fits 1962-67 Chevy II Nova (may need to "slot" tie bar mount).  

    • 5" Stroke - 11.90" Comp - 16.90" Ext
    • 13.75"-14.75" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA
  • AFCO 3855CF 62-67 Chevy Nova Pro Touring Single Adjustable Front Shock
    AFCO 3855CF 62-67 Chevy Nova Pro Touring Single Adjustable Front Shock
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for your Chevy II. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    Fits 1962-67 Chevy II Nova (may need to "slot" tie bar mount).  

    • 5" Stroke - 11.90" Comp - 16.90" Ext
    • 13.75"-14.75" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA
  • AFCO 3840CF Pro Touring Double Adj Front Shock, Chevy/GM/Dodge Truck
    AFCO 3840CF Pro Touring Double Adj Front Shock, Chevy/GM/Dodge Truck
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 4" Stroke - 10.90" Comp - 14.90" Ext
    • 12.25"-13.25" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    Note: You may need to "slot" the tie bar mount.  

    For application information see Application tab. 

     

  • AFCO 3845CF Pro Touring Single Adj Front Shock, Chevy/GM/Dodge Truck
    AFCO 3845CF Pro Touring Single Adj Front Shock, Chevy/GM/Dodge Truck
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 4" Stroke - 10.90" Comp - 14.90" Ext
    • 12.25"-13.25" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    Note: You may need to "slot" the tie bar mount.  

    For application information see Application tab. 

     

  • Pro Shocks C200/SR500 64-74 GM B/B Coilover Front Shock Conversion Kit
    Pro Shocks C200/SR500 64-74 GM B/B Coilover Front Shock Conversion Kit
    x
                

    Pro Coilover conversion kits feature a steel-body coilover front shock which bolts directly in place of your factory front shock. Requires no welding, cutting or modifications to your original frame. Sold as a PAIR.

    Fits the following applications:

    • Skylark '64-'67
    • Camaro '67-'69
    • El Camino/Chevelle'64-'67
    • Nova/Chevy II '68-'74
    • Corvette '63-'82
    • Cutlass '64-'67
    • Omega '73-'74
    • Firebird '67-'69
    • LeMans/GTO/Tempest '64-'72
  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3950 Instructions (PDF)

  • AFCO 3870CR-2 1970-81 Camaro Pro Touring Double Adj. Rear Shock
    AFCO 3870CR-2 1970-81 Camaro Pro Touring Double Adj. Rear Shock
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 7" Stroke - 13.90" Comp - 20.90" Ext
    • 15.50"-18.50" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    Fits 1970-81 Chevy Camaro. Note: You may need to "slot" the tie bar mount.  

  • AFCO 3860CM Dodge/Plymouth Double Adj. Front Shock, A/B/E Body
    AFCO 3860CM Dodge/Plymouth Double Adj. Front Shock, A/B/E Body
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Can be converted to coil-over with kit
    • Factory Dyno Tested for performance
    • Made in the USA

    See Application tab for chassis fittment. 

  • AFCO 3875CR-2 1970-81 Camaro Pro Touring Single Adj. Rear Shock
    AFCO 3875CR-2 1970-81 Camaro Pro Touring Single Adj. Rear Shock
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 7" Stroke - 13.90" Comp - 20.90" Ext
    • 15.50"-18.50" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    Fits 1970-81 Chevy Camaro. Note: You may need to "slot" the tie bar mount.  

  • AFCO 3870CR Pro Touring Double Adjustable Rear Shock, Ford/Mercury/GM
    AFCO 3870CR Pro Touring Double Adjustable Rear Shock, Ford/Mercury/GM
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 7" Stroke - 13.90" Comp - 20.90" Ext
    • 15.50"-18.50" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    For application information see Application tab.

  • AFCO 3895CM 1957-79 Dodge-Plymouth Pro Touring Single Adj. Rear Shock
    AFCO 3895CM 1957-79 Dodge-Plymouth Pro Touring Single Adj. Rear Shock
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 9" Stroke
    • 18"-20" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    Fits 1957-1979 Chrysler-Dodge-Plymouth passenger cars - see Application tab.   

  • AFCO 3890CM 1957-79 Dodge-Plymouth Pro Touring Double Adj. Rear Shock
    AFCO 3890CM 1957-79 Dodge-Plymouth Pro Touring Double Adj. Rear Shock
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 9" Stroke
    • 18"-20" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    Fits 1957-1979 Chrysler-Dodge-Plymouth passenger cars - see Application tab.   

  • AFCO 3870CR-1 Pro Touring Double Adjustable Rear Shock, Chevy / GM
    AFCO 3870CR-1 Pro Touring Double Adjustable Rear Shock, Chevy / GM
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for your Tri-Five Chevy. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 7" Stroke - 13.90" Comp - 20.90" Ext
    • 15.50"-18.50" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    Note: You may need to "slot" the tie bar mount.  

    For application information see Application tab. 

  • AFCO 3875CR Pro Touring Single Adjustable Rear Shock, Ford/Mercury/GM
    AFCO 3875CR Pro Touring Single Adjustable Rear Shock, Ford/Mercury/GM
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 7" Stroke - 13.90" Comp - 20.90" Ext
    • 15.50"-18.50" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    For application information see Application tab.

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3948 Instructions (PDF)

  • AFCO 3875CR-1 Pro Touring Single Adjustable Rear Shock, Chevy / GM
    AFCO 3875CR-1 Pro Touring Single Adjustable Rear Shock, Chevy / GM
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for your Tri-Five Chevy. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 7" Stroke - 13.90" Comp - 20.90" Ext
    • 15.50"-18.50" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    Note: You may need to "slot" the tie bar mount.  

    For application information see Application tab. 

  • Pro Shocks Mustang II Aluminum Coilover Shocks, 4 Inch Stroke
    Pro Shocks Mustang II Aluminum Coilover Shocks, 4 Inch Stroke
    x
                

    Pro Shocks 3-way adjustable aluminum bolt-in shocks for Mustang II front suspension. Shocks are available in 4" stroke with either a milled finish or fully polished finish. Kit comes complete with mounting ends, coil-over kits, shocks, and steel spacers.

    Sold as a PAIR. Springs sold separately.

  • AFCO 3240C Pro Touring Elite Series Shock, 4 Inch Stroke
    AFCO 3240C Pro Touring Elite Series Shock, 4 Inch Stroke
    x
                

    AFCO's Pro Touring Elite Series double adjustable shocks offer a unique blend of hydraulic and gas-assisted dampening that provides unparalleled on-and-off track performance. These shocks will revolutionize the handling of your dual-purpose street/autocross vehicle. 

    • Remote mounted canister allows for convenient dampening adjustment
    • Double Adjustability - broad range of adjustment
    • 1/2" I.D. x 1" wide Teflon lined spherical bearing end mounts

    Suggested Spring Height

    • 4" Stroke:  7-8"
    • 5" Stroke:  10-12"
    • 7" Stroke:  12-14"

    Coil-over compatible with purchase of additional parts.

    Front Coil-Over Mounting Guide (GIF)

    Rear Coil-Over Mounting Guide (GIF)

     

  • AFCO 3250C Pro Touring Elite Series Shock, 5 Inch Stroke
    AFCO 3250C Pro Touring Elite Series Shock, 5 Inch Stroke
    x
                

    AFCO's Pro Touring Elite Series double adjustable shocks offer a unique blend of hydraulic and gas-assisted dampening that provides unparalleled on-and-off track performance. These shocks will revolutionize the handling of your dual-purpose street/autocross vehicle. 

    • Remote mounted canister allows for convenient dampening adjustment
    • Double Adjustability - broad range of adjustment
    • 1/2" I.D. x 1" wide Teflon lined spherical bearing end mounts

    Suggested Spring Height

    • 4" Stroke:  7-8"
    • 5" Stroke:  10-12"
    • 7" Stroke:  12-14"

    Coil-over compatible with purchase of additional parts.

    Front Coil-Over Mounting Guide (GIF)

    Rear Coil-Over Mounting Guide (GIF)

     

  • AFCO 3270C Pro Touring Elite Series Shock, 7 Inch Stroke
    AFCO 3270C Pro Touring Elite Series Shock, 7 Inch Stroke
    x
                

    AFCO's Pro Touring Elite Series double adjustable shocks offer a unique blend of hydraulic and gas-assisted dampening that provides unparalleled on-and-off track performance. These shocks will revolutionize the handling of your dual-purpose street/autocross vehicle. 

    • Remote mounted canister allows for convenient dampening adjustment
    • Double Adjustability - broad range of adjustment
    • 1/2" I.D. x 1" wide Teflon lined spherical bearing end mounts

    Suggested Spring Height

    • 4" Stroke:  7-8"
    • 5" Stroke:  10-12"
    • 7" Stroke:  12-14"

    Coil-over compatible with purchase of additional parts.

    Front Coil-Over Mounting Guide (GIF)

    Rear Coil-Over Mounting Guide (GIF)

     

  • Pro Shocks Mustang II Aluminum Coilover Shocks, 3 Inch Stroke
    Pro Shocks Mustang II Aluminum Coilover Shocks, 3 Inch Stroke
    x
                

    Pro Shocks 3-way adjustable aluminum bolt-in shocks for Mustang II front suspension. Shocks are available in 3" stroke with either a milled finish or fully polished finish. Kit comes complete with mounting ends, coil-over kits, shocks, and steel spacers.

    Sold as a PAIR. Springs sold separately.

  • Landrum 20-250ML Chrysler Mono-Leaf Spring, 20 Lb. Rate, 5 Inch Arch
    Landrum 20-250ML Chrysler Mono-Leaf Spring, 20 Lb. Rate, 5 Inch Arch
    x
                

    Landrum circle track racing leaf springs are the finest and most consistent springs that we carry. Landrum leaf springs contain not only chrome vanadium, but also the correct mixture of carbon, manganese, silicon, nickel, molydenum and tungsten, all providing the the closest arch tolerance, most consistent and proper spring rate, and longest life in the industry.

    Measures 56" eye-to-eye. Fits Rayburn, Bullitt, Masterbilt, Barry Wright, Shaw, D&M, Amercan Made, Rocket, Warrior, Dirt Works, and Pro Chassis chassis.

    Landrum Spring Rate Chart (GIF)

  • Landrum 20-242ML Chrysler Mono-Leaf Spring, 55 Lb. Rate, 5 Inch Arch
    Landrum 20-242ML Chrysler Mono-Leaf Spring, 55 Lb. Rate, 5 Inch Arch
    x
                

    Landrum circle track racing leaf springs are the finest and most consistent springs that we carry. Landrum leaf springs contain not only chrome vanadium, but also the correct mixture of carbon, manganese, silicon, nickel, molydenum and tungsten, all providing the the closest arch tolerance, most consistent and proper spring rate, and longest life in the industry.

    Measures 56" eye-to-eye. Fits Rayburn, Bullitt, Masterbilt, Barry Wright, Shaw, D&M, Amercan Made, Rocket, Warrior, Dirt Works, and Pro Chassis chassis.

    Landrum Spring Rate Chart (GIF)

  • Landrum 20-240ML Chrysler Mono-Leaf Spring, 65 Lb. Rate, 5 Inch Arch
    Landrum 20-240ML Chrysler Mono-Leaf Spring, 65 Lb. Rate, 5 Inch Arch
    x
                

    Landrum circle track racing leaf springs are the finest and most consistent springs that we carry. Landrum leaf springs contain not only chrome vanadium, but also the correct mixture of carbon, manganese, silicon, nickel, molydenum and tungsten, all providing the the closest arch tolerance, most consistent and proper spring rate, and longest life in the industry.

    Measures 56" eye-to-eye. Fits Rayburn, Bullitt, Masterbilt, Barry Wright, Shaw, D&M, Amercan Made, Rocket, Warrior, Dirt Works, and Pro Chassis chassis.

    Landrum Spring Rate Chart (GIF)

Goto Previous PagePrevious Page
1 2