Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"precision steering joints" Page 1 of 3

  • Howe Racing K772 and K6024 Repl Ball Joint Stud, .5 Inch Extended
    Howe Racing K772 and K6024 Repl Ball Joint Stud, .5 Inch Extended
    x
                

    Replacement ball studs for your rebuildable Howe Precision Ball Joints. These alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    Howe's rugged Precision Ball Joint steel housings will withstand impacts that can destroy a standard automotive ball joint; typically only the ball stud will need replacement. These standard ball studs are dimensionally the same as OEM, and different length studs are available to allow easy geometry changes.

    • .5" extended
    • Replacement stud only
    • For K772 ball joint
    • Stock Application: 1965-89 Chrysler, Dodge, Plymouth
    • Racing Application: All Asphalt Late Models, Dirtworks, Troyer Ford steering uppers. Also fits Pinto upper taper.
    • Ball Size: 1.437
    • 1/2-20 Thread
    • Dimension "X" - 1.346"
    • Dimension "L" - 3.84"

    For Howe Precision Ball Joints ONLY.

    Note: Most NASCAR and IMCA divisions require ball joints with a steel cap.

  • Howe Racing K772 and K6024 Repl Ball Joint Stud, 1 Inch Extended
    Howe Racing K772 and K6024 Repl Ball Joint Stud, 1 Inch Extended
    x
                

    Replacement ball studs for your rebuildable Howe Precision Ball Joints. These alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    Howe's rugged Precision Ball Joint steel housings will withstand impacts that can destroy a standard automotive ball joint; typically only the ball stud will need replacement. These standard ball studs are dimensionally the same as OEM, and different length studs are available to allow easy geometry changes.

    • 1" extended
    • Replacement stud only
    • For K772 ball joint
    • Stock Application: 1965-89 Chrysler, Dodge, Plymouth
    • Racing Application: All Asphalt Late Models, Dirtworks, Troyer Ford steering uppers. Also fits Pinto upper taper.
    • Ball Size: 1.437
    • 1/2-20 Thread
    • Dimension "X" - 1.846"
    • Dimension "L" - 4.34"

    For Howe Precision Ball Joints ONLY.

    Note: Most NASCAR and IMCA divisions require ball joints with a steel cap.

  • Howe Racing K772 and K6024 Repl Ball Joint Stud, .75 Inch Extended
    Howe Racing K772 and K6024 Repl Ball Joint Stud, .75 Inch Extended
    x
                

    Replacement ball studs for your rebuildable Howe Precision Ball Joints. These alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    Howe's rugged Precision Ball Joint steel housings will withstand impacts that can destroy a standard automotive ball joint; typically only the ball stud will need replacement. These standard ball studs are dimensionally the same as OEM, and different length studs are available to allow easy geometry changes.

    • .75" extended
    • Replacement stud only
    • For K772 ball joint
    • Stock Application: 1965-89 Chrysler, Dodge, Plymouth
    • Racing Application: All Asphalt Late Models, Dirtworks, Troyer Ford steering uppers. Also fits Pinto upper taper.
    • Ball Size: 1.437
    • 1/2-20 Thread
    • Dimension "X" - 1.596"
    • Dimension "L" - 4.09"

    For Howe Precision Ball Joints ONLY.

    Note: Most NASCAR and IMCA divisions require ball joints with a steel cap.

  • Howe Racing K772 and K6024 Repl Ball Joint Stud, .2 Inch Extended
    Howe Racing K772 and K6024 Repl Ball Joint Stud, .2 Inch Extended
    x
                

    Replacement ball studs for your rebuildable Howe Precision Ball Joints. These alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    Howe's rugged Precision Ball Joint steel housings will withstand impacts that can destroy a standard automotive ball joint; typically only the ball stud will need replacement. These standard ball studs are dimensionally the same as OEM, and different length studs are available to allow easy geometry changes.

    • .2" extended
    • Replacement stud only
    • For K772 ball joint
    • Stock Application: 1965-89 Chrysler, Dodge, Plymouth
    • Racing Application: All Asphalt Late Models, Dirtworks, Troyer Ford steering uppers. Also fits Pinto upper taper.
    • Ball Size: 1.437
    • 1/2-20 Thread
    • Dimension "X" - 1.046"
    • Dimension "L" - 3.54"

    For Howe Precision Ball Joints ONLY.

    Note: Most NASCAR and IMCA divisions require ball joints with a steel cap.

  • AFCO 20032-2LF Low Friction Upper Ball Joint, Extended Length
    AFCO 20032-2LF Low Friction Upper Ball Joint, Extended Length
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!  It is critical to handling that suspension components be as free as possible to move.  Low friction ball joints allow the suspension to give rather than allowing the tire to bounce over rough surfaces.  Low tire pressures magnify the need to minimize friction in the suspension.

    • Precision machined to tight tolerances, providing consistent resistance throughout the travel of the ball joint to deliver consistent performance
    • Improves weight transfer
    • Frees up suspension for more consistent, repeatable chassis tuning
    • Removes suspension rigidity and allows shock and spring to have more precise wheel control
    • Adjustments are controlled more effectively by the shock and spring instead of the tire which improves traction
    • Provides more accurate set-ups during vehicle scaling
    • Meets or exceeds standard ball joint strength
    • Stock appearing
    • Lower input steering efforts and faster steering wheel return

     

  • Sweet Mfg Steering U-Joint, 1 Inch DD to 3/4 DD, IDIDIT/Flaming River Column
    Sweet Mfg Steering U-Joint, 1 Inch DD to 3/4 DD, IDIDIT/Flaming River Column
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing.

    These steering universal joints are CNC machined from aircraft steel to precision tolerances. The sealed needle bearing design will last ten times longer than a standard pin and block universal joint. The unique nickel plating prevents rust without the hassle of painting.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Howe Racing 22421S GM K5103 Style Lower Ball Joint w/ Steel Adjuster
    Howe Racing 22421S GM K5103 Style Lower Ball Joint w/ Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    Precision Ball Joint Illustration (GIF)

  • Howe Racing 22421 GM K5103 Style Lower Ball Joint w/ Alum Adjuster
    Howe Racing 22421 GM K5103 Style Lower Ball Joint w/ Alum Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    • Press-in style and cross reference with MOOG #K5103.
    • 1964-72 Chevelle ball joint
    • 1967-1969 Camaro/Firebird ball joint

    Precision Ball Joint Illustration (GIF)

  • Howe 22419 1971-Up GM Truck K6117 Style Lower Ball Joint / Alum Cap
    Howe 22419 1971-Up GM Truck K6117 Style Lower Ball Joint / Alum Cap
    x
                

    Howe precision ball joints offer the precision of a spherical bearing with the misalignment range of a ball joint.  They are easily rebuildable and adjustable. The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

    These are press-in style and cross reference Speedway part #91720038-1 and MOOG #K6117.

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.  
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.

    Precision Ball Joints Illustration (GIF)

  • Howe 22413S K6141 Style Lower Ball Joint w/ Steel Adjuster
    Howe 22413S K6141 Style Lower Ball Joint w/ Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    • 'Press-in' style
    • Cross reference Speedway part #91720038 and MOOG #K6141
    • Steel housing, steel adjuster - IMCA Approved

    Precision Ball Joint Illustration (GIF)

    *See Application tab for corresponding vehicle models. 

  • Howe 22301S 73-95 Truck K6136 Style Upper Ball Joint w/ Steel Adjuster
    Howe 22301S 73-95 Truck K6136 Style Upper Ball Joint w/ Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    These are NOT a direct fit in the stock pickup A-frames. Used on IMCA cars to raise roll center (raised pivot point).

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.  
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.

    Precision Ball Joint Illustration (GIF)

  • Howe 22419S 1971-Up GM Truck K6117 Style Lower Ball Joint/Steel Cap
    Howe 22419S 1971-Up GM Truck K6117 Style Lower Ball Joint/Steel Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    These are NOT a direct fit in the stock pickup A-frames. Used on IMCA cars to raise roll center (raised pivot point).

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.  
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.

    Precision Ball Joint Illustration (GIF)

  • Howe Racing 22301 1973-95 GM Truck K6136 Style Upper Ball Joint/Alum Cap
    Howe Racing 22301 1973-95 GM Truck K6136 Style Upper Ball Joint/Alum Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    These are NOT a direct fit in the stock pickup A-frames. Used on IMCA cars to raise roll center (raised pivot point).

    1. These ball joint use a 1973-95 GM Truck taper, but they have a longer (taller) stud than the stock GM part. The taller stud changes the pivot point due to its length, which in turn raises the car's roll center. Very common ball joint on IMCA Modifieds.  
    2. Lower ball joint fits most stut cars, 1971-1976 Impala and most wide-type dirt cars. Press-In.
    3. Fits most popular racing and passenger car spindles.
    • Bolt-in (4-bolt) style and cross reference with MOOG #K6136.

    Precision Ball Joint Illustration (GIF)

  • Howe Racing 22413 K6141 Style Lower Ball Joint w/ Alum Adjuster
    Howe Racing 22413 K6141 Style Lower Ball Joint w/ Alum Adjuster
    x
                

    Howe precision ball joints offer the precision of a spherical bearing with the misalignment range of a ball joint. They are easily rebuildable and adjustable. The alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    • 'Press-in' style
    • Cross reference Speedway part #91720038 and MOOG #K6141
    • Steel housing, aluminum adjuster

    These are press-in style and cross reference Speedway part #91720038 and MOOG #K6141.

    Precision Ball Joints Illustration (GIF)

    *See Application tab for corresponding vehicle models. 

  • Howe Racing 22330 Repl Ball Joint Stud for K772 and K6024 Style
    Howe Racing 22330 Repl Ball Joint Stud for K772 and K6024 Style
    x
                

    Replacement ball studs for your rebuildable Howe Precision Ball Joints. These alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    Howe's rugged Precision Ball Joint steel housings will withstand impacts that can destroy a standard automotive ball joint; typically only the ball stud will need replacement. These standard ball studs are dimensionally the same as OEM, and different length studs are available to allow easy geometry changes.

    • GM F-Body - 1969-81 Camaro/Firebird
    • GM X-Body - 1968-79 Nova/Apollo/Ventura, etc.
    • GM B-Body - 1971-96 Impala/Caprice
    • GM A-Body - 1964-81 Chevelle/Malibu/El Camino
    • GM G-Body - 1978-88 Monte Carlo/Regal/Cutlass

    For Howe Precision Ball Joints ONLY.

  • Precision Carbon Steel RH Male Heim Joint Rod Ends, 1/2 Inch
    Precision Carbon Steel RH Male Heim Joint Rod Ends, 1/2 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size.  

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Heim Sizes Chart (GIF)

  • Precision Carbon Steel RH Male Heim Joint Rod Ends, 3/8 Inch
    Precision Carbon Steel RH Male Heim Joint Rod Ends, 3/8 Inch
    x
                Precision steel rod ends provide greater strength than our "standard"  rod ends. They have close tolerance and have a 3 piece medium duty rod  end. Carbon steel body, 5210 precision ground ball and feature a Teflon  Kevlar race. Self lubrication teflon liner to seal out dirt and debris.  Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Precision Rod Ends Chart Application (GIF)

     

  • AFCO 20038-4LF Low Friction Lower Ball Joint, Long
    AFCO 20038-4LF Low Friction Lower Ball Joint, Long
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!  It is critical to handling that suspension components be as free as possible to move.  Low friction ball joints allow the suspension to give rather than allowing the tire to bounce over rough surfaces.  Low tire pressures magnify the need to minimize friction in the suspension.

    • Precision machined to tight tolerances, providing consistent resistance throughout the travel of the ball joint to deliver consistent performance
    • Improves weight transfer
    • Frees up suspension for more consistent, repeatable chassis tuning
    • Removes suspension rigidity and allows shock and spring to have more precise wheel control
    • Adjustments are controlled more effectively by the shock and spring instead of the tire which improves traction
    • Provides more accurate set-ups during vehicle scaling
    • Meets or exceeds standard ball joint strength
    • Stock appearing
    • Lower input steering efforts and faster steering wheel return

     

  • Howe Racing 22412 60-66 Chrysler K727 Style Lower Ball Joint/Alum Cap
    Howe Racing 22412 60-66 Chrysler K727 Style Lower Ball Joint/Alum Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    NOT IMCA Approved.

    Precision Ball Joint Illustration

    Precision Lower Ball Joint Application Chart

  • Howe Racing 22412S 1960-66 Chrysler K727 Style Lower Ball Joint/Steel Cap
    Howe Racing 22412S 1960-66 Chrysler K727 Style Lower Ball Joint/Steel Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    IMCA Approved.

    Precision Ball Joint Illustration

    Precision Lower Ball Joint Application Chart

  • Precision Carbon Steel LH Male Heim Joint Rod Ends, 3/8 Inch
    Precision Carbon Steel LH Male Heim Joint Rod Ends, 3/8 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Precision Rod Ends Chart Application (GIF)

  • AFCO 20037LF K5108 Low Friction GM Upper Ball Joint
    AFCO 20037LF K5108 Low Friction GM Upper Ball Joint
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!

    • Precision machined to tight tolerances, providing consistent resistance throughout the travel of the ball joint to deliver consistent performance
    • Improves weight transfer
    • Frees up suspension for more consistent, repeatable chassis tuning
    • Removes suspension rigidity and allows shock and spring to have more precise wheel control
    • Adjustments are controlled more effectively by the shock and spring instead of the tire which improves traction
    • Provides more accurate set-ups during vehicle scaling
    • Meets or exceeds standard ball joint strength
    • Stock appearing
    • Lower input steering efforts and faster steering wheel return

    Checking Ball Joint Wear (PDF)

  • AFCO 20033LF K5103 Low Friction Lower Ball Joint
    AFCO 20033LF K5103 Low Friction Lower Ball Joint
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!

    • Precision machined to tight tolerances, providing consistent resistance throughout the travel of the ball joint to deliver consistent performance
    • Improves weight transfer
    • Frees up suspension for more consistent, repeatable chassis tuning
    • Removes suspension rigidity and allows shock and spring to have more precise wheel control
    • Adjustments are controlled more effectively by the shock and spring instead of the tire which improves traction
    • Provides more accurate set-ups during vehicle scaling
    • Meets or exceeds standard ball joint strength
    • Stock appearing
    • Lower input steering efforts and faster steering wheel return

    Checking Ball Joint Wear (PDF)

  • Precision Carbon Steel RH Male Heim Joint Rod Ends, 5/8 Inch
    Precision Carbon Steel RH Male Heim Joint Rod Ends, 5/8 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size.  

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Heim Sizes Chart (GIF)

  • Howe 22300S 1963-71 Truck K6024 Style Upper Ball Joint/Steel Adjuster
    Howe 22300S 1963-71 Truck K6024 Style Upper Ball Joint/Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    1. This ball joint uses the Ford taper found on Mustang II/Pinto spindles. Common on IMCA Modifieds.
    2. This ball joint will NOT fit the stock taper in a 1963-71 GM truck spindle. To use this with GM-type spindles the upper taper must be reamed with reamer 910-89411.

    Bolt-in (4-bolt) style and cross reference with MOOG #K5208.

    Fits:

    • Mastersbilt, GRT, American Made, Swartz, Bernheisel, Rocket, Howe, Shaw, Bullitt, Rayburn, Harris

    Precision Ball Joint Illustration (GIF)

  • Howe Racing 22300 1963-71 Truck K6024 Style Upper Ball Joint/Alum Cap
    Howe Racing 22300 1963-71 Truck K6024 Style Upper Ball Joint/Alum Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    1. This ball joint uses the Ford taper found on Mustang II/Pinto spindles. Common on IMCA Modifieds.
    2. This ball joint will NOT fit the stock taper in a 1963-71 GM truck spindle. To use this with GM-type spindles the upper taper must be reamed with reamer 910-89411.

    Bolt-in (4-bolt) style and cross reference with MOOG #K5208.

    Fits:

    • Mastersbilt, GRT, American Made, Swartz, Bernheisel, Rocket, Howe, Shaw, Bullitt, Rayburn, Harris

    Precision Ball Joint Illustration (GIF)

  • Howe Racing 22420S GM K6145 Style Lower Ball Joint w/ Steel Adjuster
    Howe Racing 22420S GM K6145 Style Lower Ball Joint w/ Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    • Press-in style and cross reference with MOOG #K6145.

    Precision Ball Joint Illustration (GIF)

    See Application tab for corresponding vehicle models.

  • Howe Racing 22302 GM K5208 Style Upper Ball Joint w/ Aluminum Cap
    Howe Racing 22302 GM K5208 Style Upper Ball Joint w/ Aluminum Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    Upper 917-22302

    • Bolt-in (4-bolt) style and cross reference with MOOG #K5208.
    Fits
    • 1970-81 Camaro/Firebird
    • 1973-81 Chevelle A-body
    • 1975-79 Nova
    • 1978-88 Monte Carlo G-body
    • 1971-96 Impala/Caprice 

    Precision Ball Joint Illustration (GIF)

    See Application tab for corresponding vehicle models.

  • Howe Racing 22302S GM K5208 Style Upper Ball Joint w/ Steel Adjuster
    Howe Racing 22302S GM K5208 Style Upper Ball Joint w/ Steel Adjuster
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    Bolt-in (4-bolt) style and cross reference with MOOG #K5208.

    Precision Ball Joint Illustration (GIF)

    See Application tab for corresponding vehicle models.

  • Precision Carbon Steel LH Male Heim Joint Rod Ends, 5/8 Inch
    Precision Carbon Steel LH Male Heim Joint Rod Ends, 5/8 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Precision Rod Ends Chart Application (GIF)

  • Precision Carbon Steel LH Male Heim Joint Rod Ends, 1/2 Inch
    Precision Carbon Steel LH Male Heim Joint Rod Ends, 1/2 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Precision Rod Ends Chart Application (GIF)

  • Howe Racing 22320S 1968-89 Chrysler K772 Style Upper Ball Joint Steel
    Howe Racing 22320S 1968-89 Chrysler K772 Style Upper Ball Joint Steel
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    IMCA Approved. Same as Moog # K772.

    Precision Ball Joint Illustration

  • Howe Racing 22420 GM K6145 Style Lower Ball Joint w/ Alum Cap
    Howe Racing 22420 GM K6145 Style Lower Ball Joint w/ Alum Cap
    x
                

    Howe precision ball joints offer the precision of a spherical bearing with the misalignment range of a ball joint. They are easily rebuildable and adjustable. The alloy steel ball studs are process coated for low friction and long wear. You can feel the difference in smooth travel and easy steering effort.

    These are press-in style and cross reference Speedway part #91720039 and MOOG #K6145.

    Precision Ball Joints Illustration (GIF)

    See Application tab for corresponding vehicle models. 

  • Howe Racing 22320 68-89 Chrysler K772 Style Upper Ball Joint Aluminum Cap
    Howe Racing 22320 68-89 Chrysler K772 Style Upper Ball Joint Aluminum Cap
    x
                

    Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

    NOT IMCA Approved.

    Precision Ball Joint Illustration

  • Precision Carbon Steel LH Male Heim Joint Rod Ends, 7/16 Inch
    Precision Carbon Steel LH Male Heim Joint Rod Ends, 7/16 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Precision Rod Ends Chart Application (GIF)

  • Precision Carbon Steel LH Male Heim Joint Rod Ends, 3/16 Inch (10-32)
    Precision Carbon Steel LH Male Heim Joint Rod Ends, 3/16 Inch (10-32)
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Precision Rod Ends Chart Application (GIF)

  • Precision Carbon Steel LH Male Heim Joint Rod Ends, 3/4 Inch
    Precision Carbon Steel LH Male Heim Joint Rod Ends, 3/4 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Precision Rod Ends Chart Application (GIF)

  • Precision Carbon Steel LH Male Heim Joint Rod Ends, 1/4 Inch
    Precision Carbon Steel LH Male Heim Joint Rod Ends, 1/4 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Precision Rod Ends Chart Application (GIF)

  • Precision Carbon Steel LH Male Heim Joint Rod Ends, 5/16 Inch
    Precision Carbon Steel LH Male Heim Joint Rod Ends, 5/16 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Precision Rod Ends Chart Application (GIF)

  • Precision Carbon Steel RH Female Heim Joint Rod Ends, 3/8 Inch
    Precision Carbon Steel RH Female Heim Joint Rod Ends, 3/8 Inch
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

Goto Previous PagePrevious Page
1 2 3