Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"power steering mounts" Page 1 of 7

  • Small Block Chevy Power Steering Pump Bracket
    Small Block Chevy Power Steering Pump Bracket
    x
                

    This power steering pump bracket mounts a stock-style GM pump to a S/B Chevy block. Must be used with a short style water pump. Mounts on the lower left side. Bracket is zinc plated with threaded shaft. Designed to work with a '70-'82 GM pump that has a threaded pulley shaft, not a press-on style.

    Works with bolt-on or press-on pulleys with a mount spacing of 3.75". Due to the variety of pulley configurations, it is likely that you will have to space the pump/bracket for belt alignment.

    Note: This will NOT work when used on early 1970's Chevelle/Camaro chassis with a steering box.

  • Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    x
                Please view the product's page for more information
            
  • KRC KIT16312015 Basic Serpentine Drive Kit-Crate Chevy Block Mt. Pump
    KRC KIT16312015 Basic Serpentine Drive Kit-Crate Chevy Block Mt. Pump
    x
                

    KRC's basic kits are the perfect starting point for your GM 602 & 604 Crate Engines. Select the kit with the options that suit your application, then choose the appropriate accessory to complete your kit.

    • Complete basic kit
    • GM 602 & 604 Crate Engines
    • Assembly contains:
      • 7.2cc aluminum power steering pump
      • 4.2" aluminum power steering pulley
      • Aluminum driver side lower block mounted power steering pump bracket
      • Pro series pulley kit
      • KRC high performance water pump
      • Water pump spacers
      • Goodyear Gatorback belt
      • Hardware and detailed instructions

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

    Cast Iron Pump Tech (PDF)

    Cast Iron Pump Installation Instructions (PDF)

    New Pump Tips (PDF)

    Serpentine Pulley Offset (PDF)

  • Mustang II Power and Manual Rack & Pinions
    Mustang II Power and Manual Rack & Pinions
    x
                Fits aftermarket Mustang II crossmembers. Available in manual or power steering. Mount bushings are included with the Power version, but mount bushings are NOT included in the Manual version.

    MANUAL: New manual rack and pinion steering assembly for Pinto/Bobcat/Mustang II based front suspensions in street rods and kit cars. 9/16"-26 spline input shaft. 16" mount centers. 

    POWER: Rebuilt power rack from 1982-88 T-bird. Also fits aftermarket Mustang II crossmembers. Bushings included. (Can be used with a Saginaw GM power steering pump without any additional valves or inline pressure regulators). Overall width is 45-1/8" with 15-1/2" mount centers. Must use offset bushings (910-34342) to mount to original Mustang II crossmembers. 3/4"-36 spline input shaft.

    91034340 CPP Instructions (PDF)  

  • Power Steering/Coolant Tank Mount
    Power Steering/Coolant Tank Mount
    x
                

    Use this handy 3" tall aluminum bracket to mount your power steering reservoir tank or your coolant overflow expansion tank. Can be welded to the tank, strapped to the tank with hose clamps, or custom-mounted to suit your needs.

    Tank NOT included. 

  • Power Steering Box Mount w/ Fuel Shut-Off
    Power Steering Box Mount w/ Fuel Shut-Off
    x
                

    Power steering box mount with fuel shut off.

  • KRC Power Steering 77525110 CT525 GM LS Head Mounted Steering Pump Kit
    KRC Power Steering 77525110 CT525 GM LS Head Mounted Steering Pump Kit
    x
                Please view the product's page for more information
            
  • Speedway Vertical Steering Reservoir Tanks
    Speedway Vertical Steering Reservoir Tanks
    x
                Vertical mounted power steering reservoir tanks available in 1.5 lb. standard weight or 0.7 lb. lightweight.  The top return fitting is the industry standard AN 6 size. Available with AN 8 or AN 10 outlets. These tanks are NOT internally baffled.  

    Bracket sold separately. Bracket can be welded to the tank, strapped to the tank with hose clamps, or custom-mounted to suit your needs.

  • Speedway Mustang II Crossmember for 1947-54 Chevy Pickup Frame, Kit
    Speedway Mustang II Crossmember for 1947-54 Chevy Pickup Frame, Kit
    x
                Please view the product's page for more information
            
  • Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Attaches to the lower left front of the block using the two lower bolt holes located by the timing cover (the old front motor mount holes). The adjusting arm mounts to the lower water pump hole.

    • Mounts low on driver's side
    • Two positions for superior adjustability 
    • Works with short or long style water pumps
    • Use with GM Saginaw pumps with attached reservoir, "type 1" p.s. pumps
    • Works with stock steel or aluminum aftermarket pulleys
    • Choose black or chrome finish

    Power Steering Tech Questions/Tips (Link)

    Power Steering Application Tech Questions/Tips (Link)

  • 1999-06 Vortec LS High Mount P/S and Alternator Mount Bracket
    1999-06 Vortec LS High Mount P/S and Alternator Mount Bracket
    x
                

    If you want to move your power steering pump and alternator up to the driver side head, this is the bracket for you. It allows you to retain your original Vortec truck alternator, balancer, A/C bracket and compressor.

    Includes a billet aluminum bracket, belt and hardware.

    Installation Instructions (PDF)  

  • KRC Power Steering 79000000 CT525 Engine Mount
    KRC Power Steering 79000000 CT525 Engine Mount
    x
                KRC's LS to SBC engine mounts will place a LS based engine into the exact same location as a Small Block Chevrolet with no changes required to your chassis. These mounts make it simple to convert to a LS based engine. All mounts are made of steel and powdercoated black. *Note: These mounts will not work with factory exhaust manifolds that come with most LS crate engines. 
            
  • KRC KRC16312115 Serpentine Drive Kit, S/B Chevy, Block Mt Pump w/ Tank
    KRC KRC16312115 Serpentine Drive Kit, S/B Chevy, Block Mt Pump w/ Tank
    x
                Please view the product's page for more information
            
  • Billet Specialties 77910 Smooth Power Steering Reservoir w/ Bracket
    Billet Specialties 77910 Smooth Power Steering Reservoir w/ Bracket
    x
                
    • Internally baffled and O-ring sealed cap to prevent splash over
    • Vented cap eliminates positive & negative pressure which leads to foaming
    • Innovative internal return tube greatly reduces fluid turbulence & foaming
    • Extra capacity of up to 15oz. of fluid in a compact design
    • Sleek mounting bracket with internal key lock design hides all hardware
    • -6 & -10 AN male AN fittings are included and pre-installed
    • 100% billet aluminum construction - polished to a mirror finish
    • Overall dimensions: 2-7/8” O.D. x 8-3/4”H (Cap: 3” O.D.)

    Note: Bracket must mount in center of reservoir. Reservoir must be mounted higher than the power steering pump. This reservoir is not compatible with Hydroboost steering systems only because of the lack of fitting ports. It will work with Hydroboost systems with additional fabrication performed by the purchaser at their discretion.

  • Billet FM2122PC S/B Chevy Mid Mount Serpentine Conversion Kit-Press-On
    Billet FM2122PC S/B Chevy Mid Mount Serpentine Conversion Kit-Press-On
    x
                Please view the product's page for more information
            
  • Block Mount Power Steering Pump Bracket for Short Water Pump
    Block Mount Power Steering Pump Bracket for Short Water Pump
    x
                These power steering pump brackets are for short water pumps. For mounting Profile or Sweet Pump to small block Chevy V8. Bolt kit included. Anodized purple.
            
  • KRC KIT16312110 Basic Serpentine Drive Kit-S/B Chevy Head Mt Pump/Tank
    KRC KIT16312110 Basic Serpentine Drive Kit-S/B Chevy Head Mt Pump/Tank
    x
                Please view the product's page for more information
            
  • KRC KRC40400360 Adjustable Idler/Tensioner Assembly, Small Block Chevy
    KRC KRC40400360 Adjustable Idler/Tensioner Assembly, Small Block Chevy
    x
                

    KRC's adjustable idler - tensioner is used to keep proper belt tension and prevent belt slippage when using a mechanical fan. This can occur on both single drive belt and pulley systems that have a steering pump mounted of the front of an engine.

    KRC's idler tensioner is essential on dirt cars. Belt slippage can occur on cars that exceed 7,000 RPM and/or use a large or heavy fixed fan blade or a fan blade with a lot of pitch, which potentially causes overheating & pulleys to wear faster. This occurs on both single drive belt and pulley systems with a power steering pump mounted on the front of the engine. 

    Fan belts and pulleys work to slow down the fan. The belt slips because it is stretching to slow the fan. The belt heats up as the the the stretching increases. The only way to properly tension the belt is with an adjustable idler/tensioner. This keeps the engine running cooler because the belt is tighter. This will allow faster acceleration out of turns and harder braking on corners.

    • Designed for GM 602 & 604 Crate Engines
    • Use with KRC serpentine drive systems
    • Assembly contains:
      • Idler - Tensioner
      • Hardware and Instructions

     

     

  • American Autowire 500467 1947-54 Chevy Pick-up Wiring Harness
    American Autowire 500467 1947-54 Chevy Pick-up Wiring Harness
    x
                

    The wiring in your classic pick-up is about fifty years old and probably not up to the task anymore. These harnesses plug into many of the original switches and connectors, but include:

    • modern fuse panel
    • ignition switch
    • headlight switch
    • dimmer switch
    • connectors for tilt columns
    • alternators
    • dome lights
    • head and tail lights, etc.

    Everything is color coded and instructions are included. It's a painless process. For 12 Volt upgrades.

  • KRC KIT16320010 SBC Serpentine Drive Kit, Head Mt Pump/Idler Tensioner
    KRC KIT16320010 SBC Serpentine Drive Kit, Head Mt Pump/Idler Tensioner
    x
                Please view the product's page for more information
            
  • KRC Power Steering 91504000 Tank
    KRC Power Steering 91504000 Tank
    x
                KRC's brushed aluminum finished deluxe power steering reservoir tank is completely TIG welded by the best craftsmen in the country. This tank features a quarter turn non-vented cap and a -6 inlet and -10 outlet fitting. Inside the tank is an internal tee to reduce the aeration of the fluid inside the tank. Included is a bracket to mount the tank to a roll bar, you must provide hose clamps. KRC only recommends using a NON-VENTED cap on KRC power steering pumps.

    Round Tank Dimensions

  • Racing Power Steering Pump Mount
    $44.99
    $49.99
    Racing Power Steering Pump Mount
    x
                

    These racing power steering pump mounts are ultra-light and slotted to be used with standard and raised cam engines.  These mounts eliminate the need for different mounts when you have different block designs. They feature 2 horizontally mounting tabs.

    • Light Weight
    • 2 horizontally mounting tabs
    • Works with raised or standard camshafts
  • KRC Power Steering 91510000 Flat Mount Power Steering Tank
    KRC Power Steering 91510000 Flat Mount Power Steering Tank
    x
                All KRC power steering tanks feature quarter turn caps with -6 AN inlet and -10 AN outlet fittings. This flat surface mount tank has a -6 AN fitting on the right hand side facing the tank.

    466-91510 Dimensions (PDF)

  • KRC Power Steering 31613000 Water Pump Power Steering Mount Spacers
    KRC Power Steering 31613000 Water Pump Power Steering Mount Spacers
    x
                The spacer kit for Ford KRC water pump power steering pump mounting kits includes six spacers to align most pulleys.
            
  • KRC 31611000 Short Water Pump Power Steering Mounting Bracket
    KRC 31611000 Short Water Pump Power Steering Mounting Bracket
    x
                Ford mounting bracket kit for short water pump, attaches any KRC steering pump to the left cylinder head. This bracket is for 260/289/302 short deck blocks. Matches most small block Ford head patterns. Since bolt sizes vary over the years, they are not included. Spacer kit available separately.

    466-30069 Dimensions (PDF)

  • KRC 31621000 Short Water Pump Power Steering Mounting Bracket
    KRC 31621000 Short Water Pump Power Steering Mounting Bracket
    x
                Ford mounting bracket kit for short water pump, attaches any KRC steering pump to the left cylinder head. One bracket is for 351/400 tall deck blocks. Matches most small block Ford head patterns. Since bolt sizes vary over the years, they are not included. The spacer kit available separately.

    466-30070 Dimensions (PDF)

  • Small Block Chevy Low Mount Alternator Bracket, Chrome
    Small Block Chevy Low Mount Alternator Bracket, Chrome
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket, bolts and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket, bolts and spacers
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • Speedway Steering-Mounted Reservoir Tank
    Speedway Steering-Mounted Reservoir Tank
    x
                

    This power steering reservoir tank mounts horizontal, directly on steering gear. Aluminum with cap and fittings. 

    All tanks have an AN 6 top fitting, and your choice of AN 8 or AN 10 lower fitting.

  • KRC Power Steering KRC91515000 Tank, Flat Mount
    KRC Power Steering KRC91515000 Tank, Flat Mount
    x
                

    All KRC power steering tanks feature quarter turn caps with -6 AN inlet and -10 AN outlet fittings. This flat surface mount tank has a -6 AN fitting on the left hand side facing the tank.

    • Tank is 6" tall 
    • Total length is 8" with cap and bottom fitting
    • From top of cap to bottom of tank is 7 1/8"
    • Top of tank is 3 1/4" Wide
    • 3 3/4" wide at side outlet
    • 3" wide by 3-1/2" deep at the top of tank
    • 2" wide by 3-1/2" deep at the bottom of tank 
    • Side bracket is 2-1/4" tall and 1-1/4" wide

    KRC Power Steering Tank Dimensions (PDF)

  • Head Mount Power Steering Pump Bracket for Short Water Pump
    Head Mount Power Steering Pump Bracket for Short Water Pump
    x
                These power steering pump brackets are for short water pumps. For mounting Profile or Sweet Pump to small block Chevy V8. Bolt kit included. Anodized purple.
            
  • Small Block Chevy Low Mount Alternator Bracket, Plain
    Small Block Chevy Low Mount Alternator Bracket, Plain
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket, bolts and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket, bolts and spacers
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • Billet Specialties 77920 Ribbed Power Steering Reservoir w/ Bracket
    Billet Specialties 77920 Ribbed Power Steering Reservoir w/ Bracket
    x
                
    • Internally baffled and O-ring sealed cap to prevent splash over
    • Vented cap eliminates positive & negative pressure which leads to foaming
    • Innovative internal return tube greatly reduces fluid turbulence & foaming
    • Extra capacity of up to 15oz. of fluid in a compact design
    • Sleek mounting bracket with internal key lock design hides all hardware
    • -6 & -10 AN male AN fittings are included and pre-installed
    • 100% billet aluminum construction - polished to a mirror finish
    • Overall dimensions: 2-7/8” O.D. x 8-3/4”H (Cap: 3” O.D.)

    Note: Bracket must mount in center of reservoir. Reservoir must be mounted higher than the power steering pump. This reservoir is not compatible with Hydroboost steering systems only because of the lack of fitting ports. It will work with Hydroboost systems with additional fabrication performed by the purchaser at their discretion.

  • Power Steering Pump Combo, -8 AN Fittings
    Power Steering Pump Combo, -8 AN Fittings
    x
                

    Power steering pump combos include:

    • Sweet Mfg. cast iron power steering pump
    • Block mount bracket with hardware
    • Standard weight aluminum reservoir tank
    • Tank mounting bracket

    Reservior bracket can be welded to the tank, strapped to the tank with hose clamps, or custom-mounted to suit your needs.

    910-32912 Instructions (PDF)

  • Power Steering Box Mount
    $19.99
    Power Steering Box Mount
    x
                Four 1/4" mounting positions. Will work with any steering gear system.
            
  • KSE Racing Products KSC1068-002 Rear Mount Power Steering Pump
    KSE Racing Products KSC1068-002 Rear Mount Power Steering Pump
    x
                

    The KSE HPD power steering pump is 1.4 lb. lighter and 25% more efficient than the previous design. Large AN 10 inlet eliminates cavitation up to 10,000 engine RPM. Requires AN 10 supply line.

    • Mounts direct to torque plate
    • Fits all makes of sprint & midget chassis
    • Accepts all popular fuel injection pumps
    • Weighs only 2.5 lbs. (including mount bracket)
    • Relief valve set at 1400 PSI
    • 3/8" hex drive male input and female output
  • AFCO 37191 Small Block Chevy Power Steering Pump Mount-Bolts to Block
    AFCO 37191 Small Block Chevy Power Steering Pump Mount-Bolts to Block
    x
                
    • CNC-machined lightweight aluminum
    • Mounts racing type power steering pumps
    • Fits Small Block Chevy V8
Goto Previous PagePrevious Page
1 2 3 4 5 6 7