Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"power rack pump" Page 1 of 1

  • Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump
    Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump
    x
                

    Our standard power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits. This set adapts a 1982-1988 T-Bird/Cougar rack or our 91034340-POW rack to a GM style pump. Return hose will normally need to be cut to length.

    The pressure line in this kit has an inverted flare fitting at the pump end along with a 14mm O-ring fitting on the rack end. It also comes with an adaptor so that it can work with an O-ring style (metric) pump fitting. We suggest using power steering pumps 91032922-GM or 910-32908.

    Kit includes:

    • Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting.
    • The fittings that go into the 1982-1988 T-bird rack which are 14mm O-ring (high pressure) and 16mm O-ring (low pressure return) with the smaller O-ring fitting hose end being the pressure side for the rack.

     

    910-32535 Instructions (PDF)

    91032535 CPP Instructions (PDF) 

  • Mustang II-GM Pump Power Steering Hose Kits
    Mustang II-GM Pump Power Steering Hose Kits
    x
                It is common to use an early GM power steering pump with a Mustang II power rack and pinion. Our Mustang II/GM pump power steering hose assemblies are an inexpensive alternative to  the more costly stainless steel braided hose kits. The return hose included in this kit will  normally need to be cut to length.

    This has an adapter to allow it to work with both metric O-ring and standard inverted flare threads on the power steering pump fitting.

    This will work with the 1974-78 Mustang II power rack and pinion in conjunction with the suggested power steering pumps 910-32922-FORD and 910-32908-BLK. When using an early GM pump with Mustang II rack, you will also need flow reducer valve 910-32918. This valve reduces the fluid flow from three gallons-per-minute to two gallons-per-minute, which cures problems of twitchy steering when these components are used together.
  • Mustang II Power and Manual Rack & Pinions
    Mustang II Power and Manual Rack & Pinions
    x
                Fits aftermarket Mustang II crossmembers. Available in manual or power steering. Mount bushings are included with the Power version, but mount bushings are NOT included in the Manual version.

    MANUAL: New manual rack and pinion steering assembly for Pinto/Bobcat/Mustang II based front suspensions in street rods and kit cars. 9/16"-26 spline input shaft. 16" mount centers. 

    POWER: Rebuilt power rack from 1982-88 T-bird. Also fits aftermarket Mustang II crossmembers. Bushings included. (Can be used with a Saginaw GM power steering pump without any additional valves or inline pressure regulators). Overall width is 45-1/8" with 15-1/2" mount centers. Must use offset bushings (910-34342) to mount to original Mustang II crossmembers. 3/4"-36 spline input shaft.

    91034340 CPP Instructions (PDF)  

  • Unisteer 8010740-01 1968-72 Chevelle Power Rack & Pinion Kit w/ Pump
    Unisteer 8010740-01 1968-72 Chevelle Power Rack & Pinion Kit w/ Pump
    x
                

    This rack & pinion conversion kit from Unisteer will give your 1968-1972 Chevelle the ease of steering and road feel modern cars have. Precisely engineered to bolt in without sacrificing steering geometry or safety.

    Kit includes the power rack, mounting bracket, power steering pump kit with a clip-on resevoir for a long water pump, and steering shaft kit designed for a factory steering column as well as all the necessary hardware to complete the installation. The kit features a black powder coated heavy-duty bracket that eliminates any twisting or flexing present in other kits.

    910-32309 Instructions (PDF)

  • Mustang II Power Steering Flow Valve for GM Pump, 2 GPM
    Mustang II Power Steering Flow Valve for GM Pump, 2 GPM
    x
                

    It is common to use an early GM power steering pump with a Mustang II power rack and pinion. Most who have tried it have found that the steering was twitchy or that it easily darts. This valve reduces the fluid flow from three gallons-per-minute to two gallons-per-minute, which cures the problem. For applications using the O-ring style power steering hoses. Installs in the back side of the pump as shown in the extra photos.

    If converting pump from modern 16mm o-ring to traditional 5/8" inverted flare style hoses, order (1) Adapter Insert 910-32921. 

    910-32918 Instructions (PDF)

  • Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit
    Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit
    x
                

    These stainless steel braided power steering hose kits will connect 1984-88 T-Bird and 1979-93 Mustang racks to most Ford or GM style internal reservoir power steering pumps. The hoses provide a custom look without the need to buy any additional parts. This kit is designed for drivers side pumps and may require hoses to be trimmed to length.

    The kit includes:

    • (2) 24" stainless steel braided hoses with 90° ends installed (rack end)
    • (1) Banjo bolt assembly for the pressure connection to the pump with 5/8" or 16mm threads
    • (1) Custom clamp cover for the return hose which connects to a hose nipple on the pump
    • Rack fittings in this kit are one each, 16mm or 5/8"-18, and one each, 14mm or 9/16"-18

    617-4835 Instructions (PDF) 

  • Aluminum Power Steering Pumps w/ Reservoir
    Aluminum Power Steering Pumps w/ Reservoir
    x
                

    We offer these brand new lightweight aluminum power steering pumps with a reservoir. Available in either Ford (low flow) or GM (high flow) settings.

    • Ford - low flow for Mustang II power rack & pinion and Ford power steering
    • GM - high flow for T-Bird power rack & pinion and GM power steering
    GM:
        * AN 6 pressure outlet
        * AN 6 return inlet
    Ford:
        * 16mm 1.5 pressure outlet
        * Hose barb return inlet

    Use this Polished V-Belt Pulley sold separately.

  • Remote Reservoir Power Steering Pumps for GM & T-Bird
    Remote Reservoir Power Steering Pumps for GM & T-Bird
    x
                

    This high flow style remote reservoir power steering pump can be used with GM power steering or the 1982-1988 T-bird power rack and pinion. (Must be revalved if used with Mustang II rack and pinion or Ford power steering).

    • Available in black or chrome
    • Compact size
    • Same as GM Type II TC pumps
    • For use with remote reservoir
    • Pulley installation kit included
    • Pulley NOT included (use pulley 91032909)
  • Billet Specialties 77900 Power Steering Hose Kit for Remote Reservoir
    Billet Specialties 77900 Power Steering Hose Kit for Remote Reservoir
    x
                

    Premium power steering hose kit by Billet Specialties. Comes with quality Russell Performance adapters for most common pumps, boxes, and racks. Designed for use with Tru Trac systems with remote reservoir only.

    Applications:

    • '65-'78 GM 800 steering gear box (Metric & SAE)
    • '74-'77 Ford Mustang II rack & pinion
    • CPP GM 500 steering box
    • GM Metric rack & pinion
    • Flaming River rack & pinion
    • Dodge Omni rack & pinion

    910-13260 Instructions (PDF)

  • High Flow Aluminum Power Steerng Pump for T-Bird & GM
    High Flow Aluminum Power Steerng Pump for T-Bird & GM
    x
                

    These brand new aluminum remote reservoir power steering pumps are a high flow type for use with 1982-88 T-Bird power rack & pinions or GM power steering. Same as GM Type II TC pumps.

    • The fitting at the inlet (suction) end of this pump is AN10 male
    • The fitting at the outlet (pressure) end is AN6 male
    • A 5/8"-18 banjo fitting can be used on this pump by removing the AN6 male fitting. The internal threads are 5/8"-18.
    Use this Polished V-Belt Pulley sold separately.

     

     

  • Unisteer 8010540-01 1967-74 GM Power Rack & Pinion Kit
    Unisteer 8010540-01 1967-74 GM Power Rack & Pinion Kit
    x
                

    This rack & pinion conversion kit from Unisteer will give your Nova the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety.

    The mounting bracket attaches to the bottom two control arm bolts on the rear of the crossmember. To install, simply remove the existing bolts and replace with the provided longer bolts, bolting the rack up into position. Then unbolt the stock steering arms and replace them with the new steering arms provided and attach the provided outer tie-rod ends, and that is it.

    • Matches stock steering geometry - little to no bump steer
    • Complete bolt on kit - no welding or chassis modification required
    • Works with both big block and small block engines
    • Kit comes standard in black powder coat
    • Works with factory steering pump (new lines required, see Notes)

    Power racks use the 17mm DD spline.  Will work with both B/B and S/B engines. 

    Fits

     

    • 1967-69 Camaro
    • 1968-74 Nova X-Body 

     

    Instructions (PDF)

  • AFCO 37380 Power Steering Pump w/ V-Pulley 1100#
    AFCO 37380 Power Steering Pump w/ V-Pulley 1100#
    x
                

    AFCO ported power steering pumps were developed with a matched pump volume and pressure to meet the requirements of today's gear box and rack and pinion steering systems.  We dyno-test each pump to ensure its quality. 

    • Correct pressure (6AN) & return (10AN) fittings installed
    • 100% pressure-tested
    • Plated Body
    • Lightweight pulley design
    • Popular racing design
    • Available in 1100# pressure
    • 6" V-Pulley

     

  • AFCO 37382 Power Steering Pump Without Pulley 1100#
    AFCO 37382 Power Steering Pump Without Pulley 1100#
    x
                

    AFCO ported power steering pumps were developed with a matched pump volume and pressure to meet the requirements of today's gear box and rack and pinion steering systems.  We dyno-test each pump to ensure its quality. 

    • Correct pressure (6AN) & return (10AN) fittings installed
    • 100% pressure-tested
    • Plated Body
    • Lightweight pulley design
    • Popular racing design
    • Available in 1100# pressure

     

  • 1968-74 Mopar B Body Rack and Pinion Kit - B/B Engine
    1968-74 Mopar B Body Rack and Pinion Kit - B/B Engine
    x
                

    You've spent a lot of money fixing up your classic Mopar, and it would be silly to scrimp on the steering now. These power rack and pinion conversion kits will give you better feel and control than the original ever had, plus it's easy to install.

    Kit features all of the high quality components needed to transform your Mopar's steering.  Includes:

    • Mounting Bracket
    • Mounting Hardware
    • Tie Rod Ends
    • Power Steering Pump Kit
    • Steering Shaft
    Instructions (PDF)
  • 1970-74 Mopar E Body Rack and Pinion Kit - B/B Engine
    1970-74 Mopar E Body Rack and Pinion Kit - B/B Engine
    x
                

    You've spent a lot of money fixing up your classic Mopar, so it would be silly to scrimp on the steering now. These power rack and pinion conversion kits will give you better feel and control than the original ever had, plus it's easy to install.

    Kit features all of the high quality components needed to transform your Mopar's steering.  Includes:

    • Mounting Bracket
    • Mounting Hardware
    • Tie Rod Ends
    • Power Steering Pump Kit
    • Steering Shaft
    Instructions (PDF)
  • Low Flow Power Steering Pump for Mustang II & Ford
    Low Flow Power Steering Pump for Mustang II & Ford
    x
                

    These brand new aluminum remote reservoir power steering pumps are available in low flow for Mustang II power rack & pinion or Ford power steering. Same as GM Type II TC pumps. 

    The flow of this pump is two gallons per minute and is rated at 1,500 PSI.

    Use pulley part #910-32928 sold separately.

     

  • 1970-1974 Mopar E Body Rack and Pinion Kit - Small Block Engine
    1970-1974 Mopar E Body Rack and Pinion Kit - Small Block Engine
    x
                

    You've spent a lot of money fixing up your classic Mopar, and it would be silly to scrimp on the steering now. These power rack and pinion conversion kits will give you better feel and control than the original ever had, plus it's easy to install.

    Kit features all of the high quality components needed to transform your Mopar's steering.  Includes:

    • Mounting Bracket
    • Mounting Hardware
    • Tie Rod Ends
    • Power Steering Pump Kit
    • Steering Shaft
    Instructions (PDF)
  • 1968-74 Mopar B Body Rack and Pinion Kit - Small Block Engine
    1968-74 Mopar B Body Rack and Pinion Kit - Small Block Engine
    x
                

    You've spent a lot of money fixing up your classic Mopar, and it would be silly to scrimp on the steering now. These power rack and pinion conversion kits will give you better feel and control than the original ever had, plus it's easy to install.

    Kit features all of the high quality components needed to transform your Mopar's steering.  Includes:

    • Mounting Bracket
    • Mounting Hardware
    • Tie Rod Ends
    • Power Steering Pump Kit
    • Steering Shaft
    Instructions (PDF)
  • 1958-64 Chevy Power Rack and Pinion
    1958-64 Chevy Power Rack and Pinion
    x
                If you want to make your 1958-64 drive like a new car you should consider going to this power rack and pinion set-up. If your existing steering is hot, it may be cheaper to go this route also. It includes the rack, mounting hardware, pump and brackets, steering hoses and hoses. Choose Small Block or Big Block Chevy. Ships in two boxes.
            
  • Unisteer 8010400-01 1955-57 Chevy Power Rack & Pinion
    Unisteer 8010400-01 1955-57 Chevy Power Rack & Pinion
    x
                

    Finally a bolt-on power rack and pinion for 1955-57 Chevy cars. Simply remove the original steering box, idler arm and tie rod assembly and bolt this unit back in using the original mounting holes. Includes tie rod ends, special steering arms, and a pair of banjo fittings to adapt to AN6 fluid lines. Can be used with most GM steering pumps.

    1. This item must be used with OEM style spindles. It WILL NOT work with dropped spindles.
    2. Designed for use with S/B Chevy 265-400 c.i. V-8.
    3. Must use chassis headers and a stock type pan sump for clearance.
    4. Steering U-joint 910-32255 is required (17mm).                                                   

    910-32246 Instructions (PDF)                                     &n

  • Lucas 10442 Power Steering Fluid W/ Conditioners
    Lucas 10442 Power Steering Fluid W/ Conditioners
    x
                

    Lucas Power Steering Fluid with Conditioners is formulated with the finest base oils and a special Lucas additive package that outperforms all others, providing smooth, quiet operation while conditioning seals to prevent leaks.

    • Improves steering response and feel
    • Extends life of pumps, rack and pinion gears, seals, cylinders and valves
    • Compatible with all power steering systems and fluids, petroleum or synthetic
    • Stops fading and foaming in high performance situations

    484104421 Power Steering Fluid Safety Data Sheet (PDF)

    484104421 Power Steering Fluid Technical Data Sheet (PDF)

  • Garage Sale - Remote Reservoir Power Steering Pump For Gm & T-Bird
    Garage Sale
    Garage Sale - Remote Reservoir Power Steering Pump For Gm & T-Bird
    x
                

    This high flow style remote reservoir power steering pump can be used with GM power steering or the 1982-1988 T-bird power rack and pinion. (Must be revalved if used with Mustang II rack and pinion or Ford power steering).

    • Available in black or chrome
    • Compact size
    • Same as GM Type II TC pumps
    • For use with remote reservoir
    • Pulley installation kit included
    • Pulley NOT included (use pulley 91032909)
    This power steering pump is garage sale priced because it appears to have been installed and it is covered in p/s fluid.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  
  • Garage Sale - Mustang II Power Rack And Pinion
    Garage Sale
    Garage Sale - Mustang II Power Rack And Pinion
    x
                

    This steering rack is garage sale priced because one of the lines was crushed in shipping.  

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

    POWER: Rebuilt power rack from 1982-88 T-bird. Also fits aftermarket Mustang II crossmembers. Bushings included. (Can be used with a Saginaw GM power steering pump without any additional valves or inline pressure regulators). Overall width is 45-1/8" with 15-1/2" mount centers. Must use offset bushings (910-34342) to mount to original Mustang II crossmembers. 3/4"-36 spline input shaft.

    91034340 CPP Instructions (PDF)  

  • Garage Sale - Remote Reservoir Power Steerng Pump For GM & T-Bird, Black
    Garage Sale
    Garage Sale - Remote Reservoir Power Steerng Pump For GM & T-Bird, Black
    x
                

    This high flow style remote reservoir power steering pump can be used with GM power steering or the 1982-1988 T-bird power rack and pinion. (Must be revalved if used with Mustang II rack and pinion or Ford power steering).

    • Available in black or chrome
    • Compact size
    • Same as GM Type II TC pumps
    • For use with remote reservoir
    • Pulley installation kit included
    • Pulley NOT included (use pulley 91032909)
    This power steering pump is garage sale priced because it has been installed and returned.  This one is covered in fluid.
     
     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 
  • Garage Sale - Mustang II Power Rack And Pinion
    Garage Sale
    Garage Sale - Mustang II Power Rack And Pinion
    x
                Please view the product's page for more information
            
  • Garage Sale - Unisteer 8010400-01 1955-57 Chevy Power Rack & Pinion
    Garage Sale
    Garage Sale - Unisteer 8010400-01 1955-57 Chevy Power Rack & Pinion
    x
                Please view the product's page for more information
            
  • Garage Sale - AFCO Power Steering Pump Without Pullley, 1000 LB
    Garage Sale
    Garage Sale - AFCO Power Steering Pump Without Pullley, 1000 LB
    x
                

    AFCO ported power steering pumps were developed with a matched pump volume and pressure to meet the requirements of today's gear box and rack and pinion steering systems.  We dyno-test each pump to ensure its quality. 

    • Correct pressure (6AN) & return (10AN) fittings installed
    • 100% pressure-tested
    • Plated Body
    • Lightweight pulley design
    • Popular racing design
    • Available in 1100# pressure
    This pump is garage sale priced because it is new old stock.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  
  • Garage Sale - Mustang II Power Rack And Pinion
    Garage Sale
    Garage Sale - Mustang II Power Rack And Pinion
    x
                

    This rack is garage sale priced because the pressure port has a crack in it. Does not include rack bushings.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

    POWER: Rebuilt power rack from 1982-88 T-bird. Also fits aftermarket Mustang II crossmembers. Bushings included. (Can be used with a Saginaw GM power steering pump without any additional valves or inline pressure regulators). Overall width is 45-1/8" with 15-1/2" mount centers. Must use offset bushings (910-34342) to mount to original Mustang II crossmembers. 3/4"-36 spline input shaft.

    91034340 CPP Instructions (PDF)  

  • Garage Sale - Mustang II Power Rack And Pinion
    Garage Sale
    Garage Sale - Mustang II Power Rack And Pinion
    x
                

    This rack is garage sale priced because the lines were bent and pinched in shipping.  This rack does not include bushings.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

    POWER: Rebuilt power rack from 1982-88 T-bird. Also fits aftermarket Mustang II crossmembers. (Can be used with a Saginaw GM power steering pump without any additional valves or inline pressure regulators). Overall width is 45-1/8" with 15-1/2" mount centers. Must use offset bushings (910-34342) to mount to original Mustang II crossmembers. 3/4"-36 spline input shaft.

    91034340 CPP Instructions (PDF)  

  • Garage Sale - Low Flow Power Steering Pump For Mustang II & Ford
    Garage Sale
    Garage Sale - Low Flow Power Steering Pump For Mustang II & Ford
    x
                

    These brand new aluminum remote reservoir power steering pumps are available in low flow for Mustang II power rack & pinion or Ford power steering. Same as GM Type II TC pumps. 

    The flow of this pump is two gallons per minute and is rated at 1,500 PSI.

    Use pulley part #910-32928 sold separately.

     

    This power steering pump is garage sale priced because it appears to have been installed and returned. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS


     

  • Garage Sale - Low Flow Power Steering Pump For Mustang II & Ford
    Garage Sale
    Garage Sale - Low Flow Power Steering Pump For Mustang II & Ford
    x
                

    These brand new aluminum remote reservoir power steering pumps are available in low flow for Mustang II power rack & pinion or Ford power steering. Same as GM Type II TC pumps. 

    The flow of this pump is two gallons per minute and is rated at 1,500 PSI.

    Use pulley part #910-32928 sold separately.

     

    This power steering pump is garage sale priced because it has been installed, run and returned.  This one does make a little excessive noise when run. 

     

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - Mustang II Power Rack & Pinion
    Garage Sale
    Garage Sale - Mustang II Power Rack & Pinion
    x
                

     

    Fits aftermarket Mustang II crossmembers. Available in manual or power steering.

     

    POWER: Rebuilt power rack from 1982-88 T-bird. Also fits aftermarket Mustang II crossmembers. Bushings included. (Can be used with a Saginaw GM power steering pump without any additional valves or inline pressure regulators). Overall width is 45-1/8" with 15-1/2" mount centers. Must use offset bushings (910-34342) to mount to original Mustang II crossmembers. 3/4"-36 spline input shaft.

     

     This rack is garage sale priced because one of the lines was damaged in shipping.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Mustang II Power Rack & Pinion
    Garage Sale
    Garage Sale - Mustang II Power Rack & Pinion
    x
                

    Fits aftermarket Mustang II crossmembers. Available in manual or power steering. 

     

    POWER: Rebuilt power rack from 1982-88 T-bird. Also fits aftermarket Mustang II crossmembers. Bushings included. (Can be used with a Saginaw GM power steering pump without any additional valves or inline pressure regulators). Overall width is 45-1/8" with 15-1/2" mount centers. Must use offset bushings (910-34342) to mount to original Mustang II crossmembers. 3/4"-36 spline input shaft.

    91034340 CPP Instructions (PDF)  

     

    This rack is garage sale priced because it has been installed and run.  This one has some red paint on it. 

     

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - Mustang II Power Rack & Pinion
    Garage Sale
    Garage Sale - Mustang II Power Rack & Pinion
    x
                

    POWER: Rebuilt power rack from 1982-88 T-bird. Also fits aftermarket Mustang II crossmembers. Bushings included. (Can be used with a Saginaw GM power steering pump without any additional valves or inline pressure regulators). Overall width is 45-1/8" with 15-1/2" mount centers. Must use offset bushings (910-34342) to mount to original Mustang II crossmembers. 3/4"-36 spline input shaft.

    Instructions (PDF)  

     

    This is garage sale priced because it was damaged in shipping. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Mustang II Power Steering Rack And Pinion
    Garage Sale
    Garage Sale - Mustang II Power Steering Rack And Pinion
    x
                

    POWER: Rebuilt power rack from 1982-88 T-bird. Also fits aftermarket Mustang II crossmembers. Bushings included. (Can be used with a Saginaw GM power steering pump without any additional valves or inline pressure regulators). Overall width is 45-1/8" with 15-1/2" mount centers. Must use offset bushings (910-34342) to mount to original Mustang II crossmembers. 3/4"-36 spline input shaft.

    91034340 CPP Instructions (PDF)  

     

    This rack is garage sale priced because the splines on the input shaft are slightly damaged.

     

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - Aluminum Power Steering Pump With Reserivor, Ford Flow
    Garage Sale
    Garage Sale - Aluminum Power Steering Pump With Reserivor, Ford Flow
    x
                

    We offer these brand new lightweight aluminum power steering pumps with a reservoir. Available in either Ford (low flow) or GM (high flow) settings.

    • Ford - low flow for Mustang II power rack & pinion and Ford power steering
    • Use pulley part #910-32928 sold separately.
    • FORD - Low Flow
    • 1150psi

     

    This pump is garage sale priced because it has been installed and returned.  This one has a pinhole leak in the reservoir. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - GM Power Steering Pump w/Reservior
    Garage Sale
    Garage Sale - GM Power Steering Pump w/Reservior
    x
                We offer this Saginaw power steering pump with a new reservoir, billet cap, chrome hardware and new dipstick. Desirable early style 1965-79 pump with threaded and keyed shaft for easy pulley installation. Available in powder coated black or chrome. Hoses available from local parts stores.

    Pump has a 3/8" hose barb for return line and a female 5/8"-18 inverted flare fitting for the high pressure outlet. Pulley not included. Use bracket available below.

    Pulleys available separately. AN6 fittings shown for racing applications.

     

    This item is garage sale priced because it has been installed.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - PS Hoses 82-88 T-bird
    $89.99
    $129.99
    Garage Sale
    Garage Sale - PS Hoses 82-88 T-bird
    x
                

    These stainless steel braided power steering hose kits will connect 1984-88 T-Bird and 1979-93 Mustang racks to most Ford or GM style internal reservoir power steering pumps. The hoses provide a custom look without the need to buy any additional parts. This kit is designed for drivers side pumps and may require hoses to be trimmed to length.

    The kit includes:

    • (2) 24" stainless steel braided hoses with 90° ends installed (rack end)
    This is Garage Sale priced because O-rings and fittings are not included, hoses and banjo bolt only.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS