Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"polished aluminum steering column drop" Page 1 of 2

  • Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 2-1/2 Inch Drop
    Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 2-1/2 Inch Drop
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. Mount hole spacing is 2-7/8". For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two hex screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 2-1/2 Inch drop
    • 2-7/8" mount hole spacing
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

  • Ididit 2302470040 2.5 In. Steering Tilt Column Drop Mount, 2 Inch Hole
    Ididit 2302470040 2.5 In. Steering Tilt Column Drop Mount, 2 Inch Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.

    • For tilt column
    • 2 Inch diameter hole
    • 2-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

  • Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 3-1/2 Inch Drop
    Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 3-1/2 Inch Drop
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. Mount hole spacing is 2-7/8". For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two hex screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 3-1/2 Inch drop
    • 2-7/8" mount hole spacing
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

  • Garage Sale - Polished 4-1/2 Inch Steering Column Drop
    Garage Sale
    Garage Sale - Polished 4-1/2 Inch Steering Column Drop
    x
                

    Polished aluminum 4-1/2" steering column drop. These have a 2-7/16 ID hole for the column tube. 

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Ididit 2304170040 GM 4.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    Ididit 2304170040 GM 4.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.  These are for stock GM steering columns.

    • For stock GM steering columns
    • 2-3/8 Inch diameter hole
    • 4-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Two cut-outs to allow wiring
    • Works with shift or non-shift columns
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Ididit 2302270040 GM Van 2.5 Inch Steering Column Drop Mount 2 In Hole
    Ididit 2302270040 GM Van 2.5 Inch Steering Column Drop Mount 2 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction. These are for stock GM van steering columns (2" diameter).

    • For stock GM van steering columns (2" diameter)
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary. 

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

  • Ididit 2304270040 GM Van 4.5 Inch Steering Column Drop Mount 2 In Hole
    Ididit 2304270040 GM Van 4.5 Inch Steering Column Drop Mount 2 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction. These are for stock GM van steering columns (2" diameter).

    • For stock GM van steering columns (2" diameter)
    • 2 Inch diameter hole
    • 4-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

     

  • Ididit 2303270040 GM Van 3.5 Inch Steering Column Drop Mount 2 In Hole
    Ididit 2303270040 GM Van 3.5 Inch Steering Column Drop Mount 2 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction. These are for stock GM van steering columns.

    • For stock GM van steering column
    • 2 Inch diameter hole
    • 3-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

     

  • Ididit 2302170040 GM 2.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    Ididit 2302170040 GM 2.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction. These are for stock GM steering columns.

    • For stock GM steering columns
    • 2-3/8 Inch diameter hole
    • 2-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Two cut-outs to allow wiring
    • Works with shift or non-shift columns
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Ididit 2303170040 GM 3.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    Ididit 2303170040 GM 3.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.  These are for stock GM steering columns.

    • For stock GM steering columns
    • 2-3/8 Inch diameter hole
    • 3-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Two cut-outs to allow wiring
    • Works with shift or non-shift columns
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

  • Ididit 2305270040 GM Van 5.5 Inch Steering Column Drop Mount 2 In Hole
    Ididit 2305270040 GM Van 5.5 Inch Steering Column Drop Mount 2 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction. These are for stock GM van steering columns (2" diameter).

    • For GM Van column
    • 2 Inch diameter hole
    • 5-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

  • Ididit 2305170040 GM 5.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    Ididit 2305170040 GM 5.5 Inch Steering Column Drop Mount 2-3/8 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.  These mounts feature two cut-outs to allow wiring, etc. to clear.

    • For stock GM steering columns
    • 2-3/8 Inch diameter hole
    • 5-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Two cut-outs to allow wiring
    • Works with shift or non-shift columns
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 5-1/2 Inch Drop
    Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 5-1/2 Inch Drop
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. Mount hole spacing is 2-7/8". For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two hex screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 5-1/2 Inch drop
    • 2-7/8" mount hole spacing
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 3-1/2 Inch Drop
    Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 3-1/2 Inch Drop
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. Mount hole spacing is 2-7/8". For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 3-1/2 Inch drop
    • Mount hole spacing is 2-7/8".
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 2-1/2 Inch Drop
    Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 2-1/2 Inch Drop
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 2-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 5-1/2 Inch Drop
    Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 5-1/2 Inch Drop
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 5-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 6-1/2 Inch Drop
    Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 6-1/2 Inch Drop
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 6-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 6-1/2 Inch Drop
    Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 6-1/2 Inch Drop
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. Mount hole spacing is 2-7/8". For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two hex screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 6-1/2 Inch drop
    • 2-7/8" mount hole spacing
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Ididit 2305480040 1932 Ford 5 Inch Steering Column Drop Mount 2 Inch
    Ididit 2305480040 1932 Ford 5 Inch Steering Column Drop Mount 2 Inch
    x
                

    These column drops are angle cut to fit the 1932 Ford dash. Fits tilt steering columns without column shift (2" O.D. tube). For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

    • For tilt column without column shift, 1932 Ford dash
    • 2 Inch diameter hole
    • 5 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

     

  • Garage Sale - Ididit Steering Column Drop Mount, GM Column, 2-3/8 Inch Hole
    Garage Sale
    Garage Sale - Ididit Steering Column Drop Mount, GM Column, 2-3/8 Inch Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.  These mounts feature two cut-outs to allow wiring, etc. to clear.

    • For stock GM steering columns
    • 2-3/8 Inch diameter hole
    • 5-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Two cut-outs to allow wiring
    • Works with shift or non-shift columns
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

  • Ididit 2305470040 5.5 In. Steering Tilt Column Drop Mount, 2 Inch Hole
    Ididit 2305470040 5.5 In. Steering Tilt Column Drop Mount, 2 Inch Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.

    • For tilt column
    • 2 Inch diameter hole
    • 5-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

  • Ididit 2304470040 4.5 In Steering NonShift Column Drop Mount 2 In Hole
    Ididit 2304470040 4.5 In Steering NonShift Column Drop Mount 2 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.

    • For non-shift column
    • 2 Inch diameter hole
    • 4-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

  • Ididit 2305580040 1932 Ford 5 Inch Steering Column Drop Mount 1.75 In.
    Ididit 2305580040 1932 Ford 5 Inch Steering Column Drop Mount 1.75 In.
    x
                

    These column drops are angle cut to fit the 1932 Ford dash. Fits steering columns with 1-3/4" O.D.  For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

    • For 1932 Ford dash
    • 1-3/4 Inch diameter hole
    • 5 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Ididit 2303470040 3.5 In Steering NonShift Column Drop Mount 2 In Hole
    Ididit 2303470040 3.5 In Steering NonShift Column Drop Mount 2 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.

    • For non-shift column
    • 2 Inch diameter hole
    • 3-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

  • Ididit 2305370040 5.5 In. Steering Tilt Column Drop Mount 2.25 In Hole
    Ididit 2305370040 5.5 In. Steering Tilt Column Drop Mount 2.25 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.

    • For tilt column
    • 2-1/4 Inch diameter hole
    • 5-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

  • Ididit 2304370040 4.5 In. Steering Tilt Column Drop Mount 2.25 In Hole
    Ididit 2304370040 4.5 In. Steering Tilt Column Drop Mount 2.25 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.

    • For tilt column
    • 2-1/4 Inch diameter hole
    • 4-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

  • Ididit 2303370040 3.5 In. Steering Tilt Column Drop Mount 2.25 In Hole
    Ididit 2303370040 3.5 In. Steering Tilt Column Drop Mount 2.25 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.

    • For tilt column
    • 2-1/4 Inch diameter hole
    • 3-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

  • Ididit 2302370040 2.5 In. Steering Tilt Column Drop Mount 2.25 In Hole
    Ididit 2302370040 2.5 In. Steering Tilt Column Drop Mount 2.25 In Hole
    x
                

    Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.

    • For tilt column
    • 2-1/4 Inch diameter hole
    • 2-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

  • Ididit 2305180040 1932 Ford- GM Steering Column Drop Mount-5 Inch Drop
    Ididit 2305180040 1932 Ford- GM Steering Column Drop Mount-5 Inch Drop
    x
                

    These column drops are angle cut to fit the 1932 Ford dash. Fits GM steering columns with 2-3/8" O.D. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

    • For GM column, 1932 Ford dash
    • 2-3/8 Inch diameter hole
    • 5 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

  • Ididit 2305280040 1932 Ford  5 Inch Steering Column Drop Mount, GM Van
    Ididit 2305280040 1932 Ford 5 Inch Steering Column Drop Mount, GM Van
    x
                

    These column drops are angle cut to fit the 1932 Ford dash. Fits GM van steering columns with 2" O.D. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

    • For GM van steering columns, 1932 Ford dash
    • 2 Inch diameter hole
    • 5 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

     

  • Ididit 2305380040 1932 Ford 5 Inch Tilt Column Drop Mount 2.25 In Hole
    Ididit 2305380040 1932 Ford 5 Inch Tilt Column Drop Mount 2.25 In Hole
    x
                

    These column drops are angle cut to fit the 1932 Ford dash. Fits tilt steering columns with column shift (2-1/4" O.D. tube). For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

    • For tilt column, 1932 Ford dash
    • 2-1/4 Inch diameter hole
    • 5 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

    Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

     

  • V8 Steering Column Drop - 2 Inches
    $239.99
    $299.99
    Garage Sale
    V8 Steering Column Drop - 2 Inches
    x
                

    Accessorize your Ford street rod with a column drop inspired by the iconic Ford V8 logo from the 1930's.

    This highly polished billet aluminum column drop is available for 2" steering columns and has a 5-1/2" drop.

    This item is garage sale priced because it has been discontinued from our current product line.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Nostalgia 2 Inch Steering Column Drop, 1-1/2 Inch Hole
    Nostalgia 2 Inch Steering Column Drop, 1-1/2 Inch Hole
    x
                

    Beautifully polished cast aluminum steering column drop for early Ford steering columns (1-1/2" diameter tube) with column shift. Can be reworked to fit other makes of cars.

    Note: Column drop length shown is measured from the centerline of the column to the column drop mount surface.

  • Nostalgia 2 Inch Steering Column Drop, 1-1/2 Inch Hole w/ Shift
    Nostalgia 2 Inch Steering Column Drop, 1-1/2 Inch Hole w/ Shift
    x
                

    Beautifully polished cast aluminum steering column drop for early Ford steering columns (1-1/2" diameter tube) with column shift. Can be reworked to fit other makes of cars.

    Note: Column drop length shown is measured from the centerline of the column to the column drop mount surface.

  • Nostalgia 3-1/2 Inch Steering Column Drop, 1-1/2 Inch Hole w/ Shift
    Nostalgia 3-1/2 Inch Steering Column Drop, 1-1/2 Inch Hole w/ Shift
    x
                

    Beautifully polished cast aluminum steering column drop for early Ford steering columns (1-1/2" diameter tube) with column shift. Can be reworked to fit other makes of cars.

    Note: Column drop length shown is measured from the centerline of the column to the column drop mount surface.

  • Nostalgia 3-1/2 Inch Steering Column Drop, 1-1/2 Inch Hole
    Nostalgia 3-1/2 Inch Steering Column Drop, 1-1/2 Inch Hole
    x
                

    Beautifully polished cast aluminum steering column drop for early Ford steering columns (1-1/2" diameter tube) without column shift. Can be reworked to fit other makes of cars.

    Note: Column drop length shown is measured from the centerline of the column to the column drop mount surface.

  • Garage Sale - V8 Steering 1-3/4 Inch Column Drop
    Garage Sale
    Garage Sale - V8 Steering 1-3/4 Inch Column Drop
    x
                

    Accessorize your Ford street rod with a column drop inspired by the iconic Ford V8 logo from the 1930's

    This highly polished billet aluminum column drop is available to fit 1-3/4 steering columns and has a 5-1/2" drop.

    This item is garage sale priced because it has been discontinued from our current product line.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Speedway Swinger Column Drop, Tilt Column, 2 Inch Hole, 3-1/2 Inch
    Speedway Swinger Column Drop, Tilt Column, 2 Inch Hole, 3-1/2 Inch
    x
                

    A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction. Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

  • Speedway Column Drop, Tilt Column, 2 Inch Hole, 5-1/2 Inch
    Speedway Column Drop, Tilt Column, 2 Inch Hole, 5-1/2 Inch
    x
                

    A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction. Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

  • Speedway Swinger Column Drop, Tilt Column, 2-1/4 Inch Hole, 3-1/2 Inch
    Speedway Swinger Column Drop, Tilt Column, 2-1/4 Inch Hole, 3-1/2 Inch
    x
                

    A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction. Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

Goto Previous PagePrevious Page
1 2