Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"plain drop axle" Page 1 of 3

  • Speedway Forged 4 Inch Drop I-Beam Front Axle, Plain
    Speedway Forged 4 Inch Drop I-Beam Front Axle, Plain
    x
                Please view the product's page for more information
            
  • Steering and Brake Kit for 46 Inch Ford Axle
    Steering and Brake Kit for 46 Inch Ford Axle
    x
                

    This kit makes it easy to order a steering and brake kit in plain or chrome for your Ford axle. Included in kit are forged '37-'41 Ford spindles with fitted kingpins, 1-3/4" dropped bolt-on arms, 11" brake rotors with 5 on 4.5" or 5 on 4.75" bolt pattern, brackets, bearings and seals, mounting hardware, GM Metric calipers, spindle nuts, dust caps, brake lines with tabs, tie rod ends, and tie rod tube.

    • Ford Spindles
      • One piece forged 4140 steel
      • Modeled after the 1937-41 round-back design
      • Standard king pins fit to spindles
      • Spindle Identification Guide (Link)
    • Speedway 11" Brake Kit
      • 11" vented iron rotor, 1" thick 
      • Wheel studs - 1/2" Fine (4-1/2" BP), 7/16" Fine (4-3/4" BP)
      • GM Metric '78-'88 calipers, 2-1/2" piston

    Choose 46" or 48" axle width kit. For spring over axles only.

  • Speedway Forged 4 Inch Drop I-Beam Front Axle, Plain, Drilled
    Speedway Forged 4 Inch Drop I-Beam Front Axle, Plain, Drilled
    x
                Please view the product's page for more information
            
  • Plain 1928-36 Ford 4 Inch Dropped I-Beam Axle, 48 Inches
    Plain 1928-36 Ford 4 Inch Dropped I-Beam Axle, 48 Inches
    x
                

    These precision made 4" dropped I-Beam axles accept 1928-36 Ford spindles and have 2-1/4" axle bosses. Dropped I-beam axles feature a one-piece design cast from high-strength 65-45-12 annealed ductile iron.

    Caster Angle Illustration (GIF)

    Leaf Spring Measuring Guide (Link)

    I-Beam Axle Application Chart (GIF)

    Front Axle/Suspension Tech Tips (GIF) 

  • Spring-Behind 4 Inch Drop Tube Axle Front End for Ford Spindles, Plain
    Spring-Behind 4 Inch Drop Tube Axle Front End for Ford Spindles, Plain
    x
                

    For 1937-1948 early Ford passenger car spindles. Maximum car weight 2500 lbs.  Plain steel construction.

    Kit includes:

    • Two 1-3/4" spring shackles w/ nylon bushings
    • Two spring pivots
    • 26" 4-leaf spring w/ nylon buttons
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 4" dropped
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" Heims with jam nuts
    • Spring U-bolts sold separately

    Instructions (PDF)

    Front Axle/Suspension Tech Tips (GIF) 

  • Spring-Over 4 Inch Drop Front End for Chevy Spindles, Plain
    Spring-Over 4 Inch Drop Front End for Chevy Spindles, Plain
    x
                For T's and early 1930's street rods using 1949-54 Chevy passenger car spindles. Maximum car weight 2500 lbs.

    Kit includes:

    • Two 1-3/4" spring shackles with nylon bushings
    • Two spring pivots
    • 26" 4-leaf Super Glide™ spring, 1-3/4" wide
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 4" drop
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" heims with jam nuts
    • Spring U-bolts sold separately

    Front Axle/Suspension Tech Tips (GIF)

  • Spring-Over 4 Inch Drop Front End for Ford Spindles, Plain
    Spring-Over 4 Inch Drop Front End for Ford Spindles, Plain
    x
                For T's and early 1930's street rods using 1937-48 Ford passenger car spindles. Maximum car weight is 2500 lbs. 

    Kit includes:

    • Two 1-3/4" spring shackles with nylon bushings
    • Two spring pivots
    • 26" 4-leaf Super Glide™ spring, 1-3/4" wide
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 4" drop
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" heims with jam nuts
    • Spring U-bolts sold separately

    Front Axle/Suspension Tech Tips (GIF)

  • Spring-Over 6 Inch Drop Front End for Chevy Spindles, Plain
    Spring-Over 6 Inch Drop Front End for Chevy Spindles, Plain
    x
                For T's and early 1930's street rods using 1949-54 Chevy passenger car spindles. Maximum car weight 2500 lbs. 

    Kit includes:

    • Two 1-3/4" spring shackles with nylon bushings
    • Two spring pivots
    • 26" 4-leaf Super Glide™ spring, 1-3/4" wide (chrome spring used on stainless steel kit)
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 6" drop
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" heims with jam nuts
    • Spring U-bolts sold separately

    Front Axle/Suspension Tech Tips (GIF)

  • Steering and Brake Kit for 48 Inch Ford Axle
    Steering and Brake Kit for 48 Inch Ford Axle
    x
                

    This kit makes it easy to order a steering and brake kit in plain or chrome for your Ford axle. Included in kit are forged '37-'41 Ford spindles with fitted kingpins, 1-3/4" dropped bolt-on arms, 11" brake rotors with 5 on 4.5" or 5 on 4.75" bolt pattern, brackets, bearings and seals, mounting hardware, GM Metric calipers, spindle nuts, dust caps, brake lines with tabs, tie rod ends, and tie rod tube.

    • Ford Spindles
      • One piece forged 4140 steel
      • Modeled after the 1937-41 round-back design
      • Standard king pins fit to spindles
      • Spindle Identification Guide (Link)
    • Speedway 11" Brake Kit
      • 11" vented iron rotor, 1" thick 
      • Wheel studs - 1/2" Fine (4-1/2" BP), 7/16" Fine (4-3/4" BP)
      • GM Metric '78-'88 calipers, 2-1/2" piston

    Choose 46" or 48" axle width kit. For spring over axles only.

  • 1937-48 Ford Steering Arms, 1-3/4 Inch Drop
    1937-48 Ford Steering Arms, 1-3/4 Inch Drop
    x
                

    These 1-3/4" drop forged steel steering arms are popular on Model T - 1934 Fords with 4" dropped axles and four-bar or hairpin radius rod suspensions. Will attach to '37-'48 Ford spindles and accept 11/16" Ford "tapered" tie rod ends (both the top and bottom are tapered to allow tie rods to mount above or below arm as needed). You can drill-through with a 5/8" bit to use spherical rod ends.

    Use a 46" eye-to-eye tie rod link when used with a 48" wide axle with Ford spindles.

     Steering Arm Ends Guide (GIF)

     Cross Steering Guide (GIF)

  • 1932-34 Ford 4-Bar 46 Inch I-Beam Axle Kit for Ford Spindles, Plain Steel
    1932-34 Ford 4-Bar 46 Inch I-Beam Axle Kit for Ford Spindles, Plain Steel
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 46" wide 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles. 

    Each kit includes:

    • 46" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 29" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF)

  • Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Plain
    Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Plain
    x
                

    For T's and early 1930's street rods using 1937-48 Ford passenger car spindles. Maximum car weight is 2500 lbs.

    Kit includes:

    • Two 1-3/4" spring shackles with nylon bushings
    • Two spring pivots
    • 26" 4 leaf Super Glide™ spring, 1-3/4" wide
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 6" drop
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" heims with jam nuts
    • Spring U-bolts sold separately
  • Plain 1932-34 Ford 4-Bar I-Beam Axle Kit, Ford Spindle
    Plain 1932-34 Ford 4-Bar I-Beam Axle Kit, Ford Spindle
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 48" wide 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly
  • Model A to 1934 Ford 48 Inch I-Beam Axle Radius Rod Kit - Ford Spindle, Plain
    Model A to 1934 Ford 48 Inch I-Beam Axle Radius Rod Kit - Ford Spindle, Plain
    x
                

    Speedway Radius Rod I-Beam axle kits are designed to fit '28-'31 Model A and '32-'34 Ford frames. I-Beam axles require '37-'48 Ford passenger car spindles. Kits are available in Plain steel or Chrome.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" dropped
    • 27" hairpin radius rods
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide spring, 1-3/4" wide
    • All hardware for assembly

    916-39506 Instructions (PDF)

    Front Axle/Suspension Tech Tips (GIF)

  • 1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Plain
    1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Plain
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF)

  • 1937-1941 Ford 4 Inch Drop I-Beam Axle, Plain
    1937-1941 Ford 4 Inch Drop I-Beam Axle, Plain
    x
                Fits 1937-41 Ford cars with stock or modified wishbone or Speedway 4-bar kits. These 4" dropped axles accept 1937-48 Ford spindles and have 2-1/4" axle bosses. I-beam axles feature a one-piece design cast from high-strength 65-45-12 annealed ductile iron.

    Axles measure 47-3⁄4" between king pin centers and 38-1⁄2" between spring perch boss centers. Plain finish.

    Caster Angle Illustration (GIF)

    Leaf Spring Measuring Guide (Link) 

     

     

  • Dropped Gasser Front Axle, Ford Spindle, 48 Inch Wide, 4 Inch Drop
    Dropped Gasser Front Axle, Ford Spindle, 48 Inch Wide, 4 Inch Drop
    x
                

    If you are looking for that dropped axle gasser look or just need a dropped axle, we've got your deal! Our plain steel, universal application axles are professionally engineered & built. Accommodates different frame widths when using our weld-on spring pads (not included, welding required). 

    • Uses '37-'48 Ford style spindles 
    • 4" drop
    • Axle Tube:  0.250" wall
    • Axle Diameter:  2.00" O.D.
    • Axle Width:  48" kingpin center-to-center
  • Model A 4-Bar I-Beam Axle Kit for Ford Spindles, Plain
    Model A 4-Bar I-Beam Axle Kit for Ford Spindles, Plain
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits. Each kit includes a 48" wide, 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly.

    Requires '37-'48 Ford passenger car spindles.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

  • Plain 1928-34 Ford 4 Inch Dropped I-Beam Axle, 46 Inches
    Plain 1928-34 Ford 4 Inch Dropped I-Beam Axle, 46 Inches
    x
                

    These precision made 4" dropped I-Beam axles accept 1928-34 Ford spindles and have 2-1/4" axle bosses. Dropped I-beam axles feature a one-piece design cast from high-strength 65-45-12 annealed ductile iron.

    Caster Angle Illustration (GIF)

    Leaf Spring Measuring Guide (Link)

    I-Beam Axle Application Chart (GIF)

    Front Axle/Suspension Tech Tips (GIF) 

  • Dropped Gasser Front Axle, Ford Spindle, 48 Inch Wide, 6 Inch Drop
    Dropped Gasser Front Axle, Ford Spindle, 48 Inch Wide, 6 Inch Drop
    x
                

    If you are looking for that dropped axle gasser look or just need a dropped axle, we've got your deal! Our plain steel, universal application axles are professionally engineered & built. Accommodates different frame widths when using our weld-on spring pads (not included, welding required). 

    • Uses '37-'48 Ford style spindles 
    • 6" drop
    • Axle Tube:  0.250" wall
    • Axle Diameter:  2.00" O.D.
    • Axle Width:  48" kingpin center-to-center
  • Model A 4-Bar Tube Axle Kit for Ford Spindles, Plain
    Model A 4-Bar Tube Axle Kit for Ford Spindles, Plain
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits.  Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles

    Each kit includes:

    • 48" kingpin-to-kingpin Tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

     

  • Dropped Gasser Front Axle, Chevy Spindle, 48 Inch Wide, 6 Inch Drop
    Dropped Gasser Front Axle, Chevy Spindle, 48 Inch Wide, 6 Inch Drop
    x
                

    If you are looking for that dropped axle gasser look or just need a dropped axle, we've got your deal! Our plain steel, universal application axles are professionally engineered & built. Accommodates different frame widths when using our weld-on spring pads (not included, welding required). 

    • Uses '49-'54 Chevy car style spindles 
    • 6" drop
    • Axle Tube:  0.250" wall
    • Axle Diameter:  2.00" O.D.
    • Axle Width:  48" kingpin center-to-center
  • Dropped Gasser Front Axle, Chevy Spindle, 48 Inch Wide, 4 Inch Drop
    Dropped Gasser Front Axle, Chevy Spindle, 48 Inch Wide, 4 Inch Drop
    x
                

    If you are looking for that dropped axle gasser look or just need a dropped axle, we've got your deal! Our plain steel, universal application axles are professionally engineered & built. Accommodates different frame widths when using our weld-on spring pads (not included, welding required). 

    • Uses '49-'54 Chevy car style spindles 
    • 4" drop
    • Axle Tube:  0.250" wall
    • Axle Diameter:  2.00" O.D.
    • Axle Width:  48" kingpin center-to-center
  • 29 Inch Front Leaf Spring, 46 Inch Axle, Reverse Eye, 1 Inch Drop, Plain
    29 Inch Front Leaf Spring, 46 Inch Axle, Reverse Eye, 1 Inch Drop, Plain
    x
                Achieve a smoother, more comfortable ride with these  springs for 1928-1934 Ford front ends.  They feature 7 leafs with reversed eyes for a 1 inch drop below stock style springs.
    • Made in the U.S.A. from high grade tempered steel
    • Reversed eyes for a 1" drop
    • Works with 46" axle
    • Get your ride lower without sacrificing ride comfort

    Leaf Spring Measuring Guide (Link)  

    Note: Be sure to include our shock mounts (91036105) and shackle kits (91033323) with these front springs.

  • Spring-Behind 4 Inch Drop Tube Axle Front End for Chevy Spindles, Plain
    Spring-Behind 4 Inch Drop Tube Axle Front End for Chevy Spindles, Plain
    x
                For 1949-1954 early Chevy passenger car spindles. Maximum car weight 2500 lbs. 

    Kit includes:

    • Two 1-3/4" spring shackles w/ nylon bushings
    • Two spring pivots
    • 26" 4-leaf spring w/ nylon buttons
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 4" dropped
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" Heims with jam nuts
    • Spring U-bolts sold separately

    Front Axle/Suspension Tech Tips (GIF)


  • Magnum Axle 2870 1942-48 Ford 4 Inch Dropped I-Beam Axle
    Magnum Axle 2870 1942-48 Ford 4 Inch Dropped I-Beam Axle
    x
                

    Fits 1942-1948 Ford passenger cars and works with a stock length spring. These 4" dropped axles accept 1937-48 Ford spindles and have 2-1/4" axle bosses. I-beam axles feature a one-piece design cast from high-strength 65-45-12 annealed ductile iron.

    Axle measures 50" between kingpins and 40-5⁄8" wide between perch bolt center. Plain finish.

    Caster Angle Illustration (GIF)

    Leaf Spring Measuring Guide (Link)

     

  • Spring-Behind 6 Inch Drop Tube Axle Front End for Chevy Spindles, Plain
    Spring-Behind 6 Inch Drop Tube Axle Front End for Chevy Spindles, Plain
    x
                For 1949-1954 early Chevy passenger car spindles. Maximun car weight 2500 lbs. 

    Kit includes:

    • Two 1-3/4" spring shackles w/ nylon bushings
    • Two spring pivots
    • 26" 4-leaf spring w/ nylon buttons
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 6" dropped
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" Heims with jam nuts
    • Spring U-bolts sold separately

    Instructions (PDF)

    Front Axle/Suspension Tech Tips (GIF)

     

  • Spring-Over 4 Inch Drop Front End for Chevy Spindles, Stainless
    Spring-Over 4 Inch Drop Front End for Chevy Spindles, Stainless
    x
                For T's and early 1930's street rods using 1949-54 Chevy passenger car spindles. Maximum car weight 2500 lbs. Choose Plain, Chrome, or Stainless steel.

    Kit includes:

    • Two 1-3/4" spring shackles with nylon bushings
    • Two spring pivots
    • 26" 4-leaf Super Glide™ spring, 1-3/4" wide (chrome spring used on stainless steel kit)
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 4" drop
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" heims with jam nuts
    • Spring U-bolts sold separately

    Front Axle/Suspension Tech Tips (GIF)

Goto Previous PagePrevious Page
1 2 3