Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"panhard bar rear suspension" Page 1 of 2

  • Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Plain Steel
    Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Plain Steel
    x
                

    Features heavy wall 21-1/2" rods with plain steel brackets. Exclusive sandwich-style brackets give greater bar support and incorporate a multi-position lower coil-over mount. 

    Complete kit includes: mild steel rods, steel brackets, bushed rod ends, and hardware. Lower coil-over shock mount stud not included. The nuts & bolts supplied in this kit are NOT polished or plated.

    • Rod length is 21-1/2"
    • Center-to-center of 4-bar eyelets is 5.5"
    • Bracket width is 1.39"

    This kit comes in two varieties:

    • TA - to fit narrow frames such as Model T or Model A
    • 3234 - to fit wider frames such as 1932-1934 Ford

    Note:  Four bar rear suspension kits require the use of a side to side control such as a panhard bar or a watts link component.

    916-49055 Instructions (PDF)

  • Bolt-On Panhard Bar for Ford 8 Inch, 9 Inch Axle
    Bolt-On Panhard Bar for Ford 8 Inch, 9 Inch Axle
    x
                

    This Mr. Roadstar Rear Panhard Bar is used to control the side-to-side movement of the rear axle. This is necessary when using a parallel 4-bar or hairpin radius rod rear suspension. The bar is threaded on one end for length adjustment and is welded on opposite end. This will require one end to be unbolted to allow for the length adjustment. Available in plain finish or polished Stainless Steel.

    Kit includes:

    • Axle Bracket (for 8" or 9" Ford)
    • Bar with Urethane bushed Stainless adjuster - 20" eye-to-eye
    • Frame Bracket

    910-49800 Instructions (PDF)

  • U Weld Model A Frame Assembly Kit
    U Weld Model A Frame Assembly Kit
    x
                If you're willing to pick up a welder in order to lower your rodding costs, Speedway Motors has a great new frame option for you.  The all-new Speedway Motors U-Weld-It Model A Frame Kit is the perfect way for do-it-yourself rodders to construct a solid, well-engineered chassis on a budget. This kit features all of the components featured on Speedway Motors' popular Model A Frame in one ready-to-weld package.

    The kit includes:
    • Boxed Model A frame rails with drilled and tapped body mounts
    • Two-inch dropped front crossmember
    • Front hairpin and rear four-bar suspension brackets
    • Front and rear shock mounts
    • S/B Chevy engine mounts
    • Transmission crossmember and mount
    • Rear crossmember kit
    • Rear panhard bar mount
    • Vega steering box mount
    • Master cylinder mount with brake pedal and hardware
    All parts are pre-cut and ready to weld together, making it simple for those with proper welding skills to assemble a strong, top-quality chassis for their street rod project.
  • Deluxe Coil-Over Rear Suspension Kit, Plain Finish
    Deluxe Coil-Over Rear Suspension Kit, Plain Finish
    x
                

    This rear suspension kit is loaded with high quality components from Speedway and Carrera. Kit includes a steel panhard bar, chrome plated Carrera coil-over shock assemblies, bare steel 32" radius rods, and all mounting brackets and hardware. The Carrera 3-way adjustable, gas pressurized and radial tuned shocks provide an excellent ride. Welding is required for assembly.

    • Kit includes:
      • Steel panhard bar
      • Chrome plated Carrera coil-over shock assemblies
      • Bare steel 32" radius rods
      • All mounting brackets and hardware

    Comes with your choice of spring rate. Use the Spring Rate Guide and Coil-Over Mounting guide to select to proper rate for your vehicle.

    Spring Rate Guide (GIF) 

    Coil-Over Mounting Guide (GIF) 

    916-49060 Instructions (PDF)

  • Panhard Bar Rear Weld-on Kits
    Panhard Bar Rear Weld-on Kits
    x
                

    Use on almost any street rod. Required for coil spring and coil-over rear suspensions. Complete kit includes rod, brackets and 5/8" hardware. Ready to install. 25.5" long.

    916-49022 Instructions (PDF)

  • Jet Modified Rear Suspension
    $1,999.99
    Jet Modified Rear Suspension
    x
                Please view the product's page for more information
            
  • Deluxe 1923 T-Bucket Frame Kit
    From: $2,699.99
    Deluxe 1923 T-Bucket Frame Kit
    x
                

    The all new Deluxe T frame is engineered to deliver the ultimate ride and handling of any T-bucket chassis! An exclusive triangulated four-bar rear suspension with coilover shocks and urethane bushings provides unparalleled adjustability and traction control, plus better ride quality than any other T-bucket chassis on the market. It's paired with urethane-bushed four-bars supporting the spring-behind-axle front suspension. The Deluxe '23 T sets a new standard for the next generation of T-buckets!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.  

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Deluxe 1923 T-Bucket Frame Kit w/ Standard Body and Bed, No Floor
    Deluxe 1923 T-Bucket Frame Kit w/ Standard Body and Bed, No Floor
    x
                The all new Deluxe T frame is engineered to deliver the ultimate ride and  handling of any T-bucket chassis! An exclusive triangulated four-bar rear  suspension with coilover shocks and urethane bushings provides unparalleled  adjustability and traction control, plus better ride quality than any other  T-bucket chassis on the market. It's paired with urethane-bushed four-bars  supporting the spring-behind-axle front suspension. The Deluxe '23 T sets a new  standard for the next generation of T-buckets! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Deluxe 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Channeled Floor
    Deluxe 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Channeled Floor
    x
                The all new Deluxe T frame is engineered to deliver the ultimate ride and  handling of any T-bucket chassis! An exclusive triangulated four-bar rear  suspension with coilover shocks and urethane bushings provides unparalleled  adjustability and traction control, plus better ride quality than any other  T-bucket chassis on the market. It's paired with urethane-bushed four-bars  supporting the spring-behind-axle front suspension. The Deluxe '23 T sets a new  standard for the next generation of T-buckets! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Deluxe 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Flat Floor
    Deluxe 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Flat Floor
    x
                The all new Deluxe T frame is engineered to deliver the ultimate ride and  handling of any T-bucket chassis! An exclusive triangulated four-bar rear  suspension with coilover shocks and urethane bushings provides unparalleled  adjustability and traction control, plus better ride quality than any other  T-bucket chassis on the market. It's paired with urethane-bushed four-bars  supporting the spring-behind-axle front suspension. The Deluxe '23 T sets a new  standard for the next generation of T-buckets! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Deluxe 1927 T-Bucket Frame Kit
    From: $2,999.99
    Deluxe 1927 T-Bucket Frame Kit
    x
                

    Looking for a little more interior room and a lower profile in your T roadster? Then try our Deluxe '27 T! The all-new Deluxe '27 frame features the same triangulated four-bar rear suspension as the Deluxe T, but with a longer wheelbase and extended rear frame section to accommodate Speedway's high-quality fiberglass '27 T roadster body. The body-and-frame combo can be used to build a hot rod with the same open engine bay and fenderless look of a T-bucket, but offers a lower seating position and a lot more legroom. Try it on for size!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Deluxe 1923 T-Bucket Frame Kit w/ Deluxe Body and Bed, Unchanneled Floor
    Deluxe 1923 T-Bucket Frame Kit w/ Deluxe Body and Bed, Unchanneled Floor
    x
                The all new Deluxe T frame is engineered to deliver the ultimate ride  and handling of any T-bucket chassis! An exclusive triangulated four-bar  rear suspension with coilover shocks and urethane bushings provides  unparalleled adjustability and traction control, plus better ride  quality than any other T-bucket chassis on the market. It's paired with  urethane-bushed four-bars supporting the spring-behind-axle front  suspension. The Deluxe '23 T sets a new standard for the next generation  of T-buckets! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

    If ordering the body kit without a floor (715-3200), please note that the door will not be hung. If you order a body kit with a floor (715-3211 or 715-3221), the door will be fitted & hung on its hinges before shipping.

  • Deluxe 1923 T Frame Kit w/ Deluxe Body and Bed, Channeled Floor
    Deluxe 1923 T Frame Kit w/ Deluxe Body and Bed, Channeled Floor
    x
                The all new Deluxe T frame is engineered to deliver the ultimate ride  and handling of any T-bucket chassis! An exclusive triangulated four-bar  rear suspension with coilover shocks and urethane bushings provides  unparalleled adjustability and traction control, plus better ride  quality than any other T-bucket chassis on the market. It's paired with  urethane-bushed four-bars supporting the spring-behind-axle front  suspension. The Deluxe '23 T sets a new standard for the next generation  of T-buckets! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

    If ordering the body kit without a floor (715-3200), please note that the door will not be hung. If you order a body kit with a floor (715-3211 or 715-3221), the door will be fitted & hung on its hinges before shipping.

  • Deluxe '27 T-Bucket Frame Kit w/ Deluxe Body, Unchanneled Floor
    Deluxe '27 T-Bucket Frame Kit w/ Deluxe Body, Unchanneled Floor
    x
                Looking for a little more interior room and a lower profile in your T roadster? Then try our Deluxe '27 T! The all-new Deluxe '27 frame features the same triangulated four-bar rear suspension as the Deluxe T, but with a longer wheelbase and extended rear frame section to accommodate Speedway's high-quality fiberglass '27 T roadster body. The body-and-frame combo can be used to build a hot rod with the same open engine bay and fenderless look of a T-bucket, but offers a lower seating position and a lot more legroom. Try it on for size! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    Doors are shipped hinged and latched, but they do require fitting and hanging onto the body by the owner.

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Deluxe 1927 T-Bucket Frame Kit w/ Deluxe Body, No Floor
    Deluxe 1927 T-Bucket Frame Kit w/ Deluxe Body, No Floor
    x
                Looking for a little more interior room and a lower profile in your T roadster? Then try our Deluxe '27 T! The all-new Deluxe '27 frame features the same triangulated four-bar rear suspension as the Deluxe T, but with a longer wheelbase and extended rear frame section to accommodate Speedway's high-quality fiberglass '27 T roadster body. The body-and-frame combo can be used to build a hot rod with the same open engine bay and fenderless look of a T-bucket, but offers a lower seating position and a lot more legroom. Try it on for size! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    Doors are shipped hinged and latched, but they do require fitting and hanging onto the body by the owner.

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build tim

  • Deluxe 1923 T-Bucket Frame Kit w/ Deluxe Body and Bed, No Floor
    Deluxe 1923 T-Bucket Frame Kit w/ Deluxe Body and Bed, No Floor
    x
                The all new Deluxe T frame is engineered to deliver the ultimate ride and handling of any T-bucket chassis! An exclusive triangulated four-bar rear suspension with coilover shocks and urethane bushings provides unparalleled adjustability and traction control, plus better ride quality than any other T-bucket chassis on the market. It's paired with urethane-bushed four-bars supporting the spring-behind-axle front suspension. The Deluxe '23 T sets a new standard for the next generation of T-buckets! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

    If ordering the body kit without a floor, please note that the door will not be hung. If you order a body kit with a floor (715-3211 or 715-3221), the door will be fitted & hung on its hinges before shipping.

  • Deluxe '27 T-Bucket Frame Kit w/ Standard Body, Unchanneled Floor
    Deluxe '27 T-Bucket Frame Kit w/ Standard Body, Unchanneled Floor
    x
                Looking for a little more interior room and a lower profile in your T  roadster? Then try our Deluxe '27 T! The all-new Deluxe '27 frame features the  same triangulated four-bar rear suspension as the Deluxe T, but with a longer  wheelbase and extended rear frame section to accommodate Speedway's high-quality  fiberglass '27 T roadster body. The body-and-frame combo can be used to build a  hot rod with the same open engine bay and fenderless look of a T-bucket, but  offers a lower seating position and a lot more legroom. Try it on for size!  

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Deluxe 1927 T-Bucket Frame Kit w/ Standard Body, No Floor
    Deluxe 1927 T-Bucket Frame Kit w/ Standard Body, No Floor
    x
                Looking for a little more interior room and a lower profile in your T  roadster? Then try our Deluxe '27 T! The all-new Deluxe '27 frame features the  same triangulated four-bar rear suspension as the Deluxe T, but with a longer  wheelbase and extended rear frame section to accommodate Speedway's high-quality  fiberglass '27 T roadster body. The body-and-frame combo can be used to build a  hot rod with the same open engine bay and fenderless look of a T-bucket, but  offers a lower seating position and a lot more legroom. Try it on for size!  

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • 1932 Lo-Boy Roadster Frame Assembly
    1932 Lo-Boy Roadster Frame Assembly
    x
                Please view the product's page for more information
            
  • Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Stainless Steel
    Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Stainless Steel
    x
                

    Features heavy wall 21-1/2" rods with plain steel brackets. Exclusive sandwich-style brackets give greater bar support and incorporate a multi-position lower coil-over mount.  Four bar rear suspension kits require the use of a side to side control such as a panhard bar or a watts link component.

    Complete kit includes: polished stainless steel rods, steel brackets, bushed rod ends, and hardware. Lower coil-over shock mount stud not included. The nuts & bolts supplied in this kit are NOT polished or plated.

    • Rod length is 21-1/2"
    • Center-to-center of 4-bar eyelets is 5.5"
    • Bracket width is 1.39"

    This kit comes in two varieties:

    • TA - to fit narrow frames such as Model T or Model A
    • 3234 - to fit wider frames such as 1932-1934 Ford

    1932-1934 Four Bar Rear Suspension Instructions (PDF)

    Note: Please be advised that the rods in this kit are shown in a plain steel finish in the alternative photos but do come with a stainless finish as shown in primary photo.

  • Small Block Chevy and TH350 Auto Trans Mount Option For T Frame Kit
    Small Block Chevy and TH350 Auto Trans Mount Option For T Frame Kit
    x
                

    This T frame kit option includes tubular engine and transmission crossmembers welded into a '23 or '27 T-Bucket frame. Will accept S/B Chevy engine and TH-350 or TH-400 transmissions.

    Note: When ordering this option with a T-Bucket frame kit, the frame will be shipped with these crossmembers welded to it.  As such, this engine/transmission crossmember option must be ordered with a T frame kit.   This is not available separate of a T frame kit.

    If you are interested in the mounts separate of the T frame kit, please see the suggested items found below.

  • Small Block Ford and C4 Auto Trans Mount Option for T Frame Kit
    Small Block Ford and C4 Auto Trans Mount Option for T Frame Kit
    x
                

    This T-frame option will include tubular engine and transmission crossmembers welded into your '23 or '27 T-Bucket chassis. Will accept S/B Ford engine and C-4 transmission only.

    Note: When ordering this option with a T-Bucket frame kit, the frame will be shipped with these crossmembers welded to it.  As such, this engine/transmission crossmember option must be ordered with a T Frame kit. This is not available separate of a T frame kit.

    • When this item is ordered with a T-Bucket frame kit, the frame will be shipped with these crossmembers welded to it.  
    • Due to clearance issue with the Vega steering box, you will need to either remote mount the oil filter or make use of the 90 degree oil filter adaptor # 910-6880.
  • Rear Suspension Kits for Model A Frame 916-57045
    Rear Suspension Kits for Model A Frame 916-57045
    x
                

    This kit is application specific to the Model A Frame part #916-57045 and will not work with or apply to any other chassis or frame configuration as this kit does NOT include the frame 4-bar chassis brackets.  If you do not have or are not working with the Model A frame # 916-57045, you should not consider this kit.  When working with any other chassis or frame assembly other than # 916-57045, please consider the 4-bar kits suggested below, #s 916-49055 & 916-49055.

    4-bar rear suspension kit # 916-49057 will only include plain or polished 4-bars, rear axle brackets, lower coilover mounts and a plain Panhard bar as pictured at left. Welding required.

    916-49057 Instructions (PDF) 

  • Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body/Bed, Channeled Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body/Bed, Channeled Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and  ease of assembly. It features the same spring-behind-axle front suspension as  the Budget T, but includes front shock/headlight mounts. The coilover rear  suspension uses traditional-style radius rods and a panhard bar, with all  necessary mounts welded in place. If you're looking for an affordable,  well-engineered T-bucket chassis requiring only basic mechanical skills to  assemble, the Nostalgia T is for you!  

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body/Bed, Unchanneled Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body/Bed, Unchanneled Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and  ease of assembly. It features the same spring-behind-axle front suspension as  the Budget T, but includes front shock/headlight mounts. The coilover rear  suspension uses traditional-style radius rods and a panhard bar, with all  necessary mounts welded in place. If you're looking for an affordable,  well-engineered T-bucket chassis requiring only basic mechanical skills to  assemble, the Nostalgia T is for you!  

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Nostalgia 1923 T-Bucket Frame Kit
    From: $2,499.99
    Product Rating: 5.00 Stars
    Nostalgia 1923 T-Bucket Frame Kit
    x
                

    The Nostalgia T frame is engineered to provide the ultimate in economy and ease of assembly. It features the same spring-behind-axle front suspension as the Budget T, but includes front shock/headlight mounts. The coilover rear suspension uses traditional-style radius rods and a panhard bar, with all necessary mounts welded in place. If you're looking for an affordable, well-engineered T-bucket chassis requiring only basic mechanical skills to assemble, the Nostalgia T is for you! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link) 

    This product requires a 3-4 week build time.

  • Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body/Bed, Channeled Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body/Bed, Channeled Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and ease of assembly. It features the same spring-behind-axle front suspension as the Budget T, but includes front shock/headlight mounts. The coilover rear suspension uses traditional-style radius rods and a panhard bar, with all necessary mounts welded in place. If you're looking for an affordable, well-engineered T-bucket chassis requiring only basic mechanical skills to assemble, the Nostalgia T is for you! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body and Bed, No Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Standard Body and Bed, No Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and  ease of assembly. It features the same spring-behind-axle front suspension as  the Budget T, but includes front shock/headlight mounts. The coilover rear  suspension uses traditional-style radius rods and a panhard bar, with all  necessary mounts welded in place. If you're looking for an affordable,  well-engineered T-bucket chassis requiring only basic mechanical skills to  assemble, the Nostalgia T is for you!  

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body/Bed, Unchanneled Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body/Bed, Unchanneled Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and ease of assembly. It features the same spring-behind-axle front suspension as the Budget T, but includes front shock/headlight mounts. The coilover rear suspension uses traditional-style radius rods and a panhard bar, with all necessary mounts welded in place. If you're looking for an affordable, well-engineered T-bucket chassis requiring only basic mechanical skills to assemble, the Nostalgia T is for you! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body and Bed, No Floor
    Nostalgia 1923 T-Bucket Frame Kit w/ Deluxe Body and Bed, No Floor
    x
                The Nostalgia T frame is engineered to provide the ultimate in economy and ease of assembly. It features the same spring-behind-axle front suspension as the Budget T, but includes front shock/headlight mounts. The coilover rear suspension uses traditional-style radius rods and a panhard bar, with all necessary mounts welded in place. If you're looking for an affordable, well-engineered T-bucket chassis requiring only basic mechanical skills to assemble, the Nostalgia T is for you! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Dirtworks 4-Link Rear Suspension Kit
    Dirtworks 4-Link Rear Suspension Kit
    x
                Please view the product's page for more information
            
  • Deluxe Coil Spring Rear Suspension Kit
    Deluxe Coil Spring Rear Suspension Kit
    x
                

    Our Deluxe Coil Spring kit includes a weld-on 25.5" Panhard bar, 2 coil springs (175 lb. rate, 14" tall, 4.5" O.D.), upper and lower spring mounts, two 32" steel radius rods with mounting brackets, and all hardware.

    Weld to your 3" axle tubes.

    916-49021 Instructions (PDF)

    Panhard Bar Mount Guide (GIF)

  • Speedway 1927 Track-T Roadster Kit
    Speedway 1927 Track-T Roadster Kit
    x
                

    With their exciting, racy styling, Track T roadsters are some of the most recognizeable hot rods in American automotive history. Designed for nostalgic originality, Speedway’s Track-T Roadster is an economical way to relive that vintage motoring spirit. This kit car turns heads wherever it goes with its beautiful, one-piece 1927 T body, smooth lines and custom track style nose.  The Track-T is designed to use the powertrain from 4-cylinder or V6 powered rear wheel drive vehicles.  In such a small, lightweight car they become mighty spirited performers.

    The 1927 Track-T basic kit includes a 1927 Model T Roadster body with right and left full length side frame covers and custom floor with transmission tunnel.  It also comes with a passenger compartment rear bulkhead divider, street rodder nose, rear roll pan, smooth flat cowl/firewall and front shock mounts.  Headlight mounts, hood top, and aluminum hood sides are also included. The storage compartment behind the seat is even large enough to accept 2-3 suitcases, or a large cooler & picnic basket. 

    The rigid tube steel chassis features front & rear kick-ups for a lower ride height and includes pre-mounted suspension bracketry. The chassis is built to accomodate a traditional spring-over, tube axle front suspension with Hairpin radius rods, Vega cross steering, and '49-'54 Chevy spindles. Rear suspension mounts will

  • Speedway Rear Suspension Kit
    $1,749.99
    Speedway Rear Suspension Kit
    x
                Our affordable Speedway rear suspension system come with everything you'll need for your IMCA racer.

    Kit includes:
    • RH & LH Steel Birdcages
    • 9" Ford Torque-Link Plates
    • 9" Ford Adj Panhard Mount
    • Swedge Tube for 5/8" Heims
    • Std 5/8" RH & LH Male Heims
    • 60" GN Housing
    • 60" GN Axles
    • GN 5 x 5" BP Hardware
    • 5" x 13" Tru-Coil Rear Springs
    • 3/4" RH & LH Jam Nuts
    • 5/8" RH & LH Jam Nuts
    • Bearing Type Pull Bar
    • 6-3/4" Progressive Pull Bar Spring
    • Swedged Tube for 5/8" Heim
  • Basic 1923 T-Bucket Frame Kit
    From: $1,999.99
    Basic 1923 T-Bucket Frame Kit
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

     

     

  • Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Channeled Floor
    Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Channeled Floor
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

  • 1932 Ford Triangulated Rear 4-Link Kit
    1932 Ford Triangulated Rear 4-Link Kit
    x
                

    Trianglated rear 4 link kit made for '32 Fords that fits a 3" axle tube. Mounts the forward brackets to the inside of your frame and eliminates the use of a Panhard bar. Adjustable bars feature urethane bushing rod ends. Three-position adjustable shock mount makes it easy to set the proper ride height.

    Sold as a kit.

  • Behind Rear End Panhard Bar Bracket - Clamp On
    Behind Rear End Panhard Bar Bracket - Clamp On
    x
                These behind rear end panhard bar brackets have four 3/4" holes for  changing roll center and panhard bar angle. Fits 3" axle tube. Clamp-on.

  • Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Unchanneled Floor
    Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Unchanneled Floor
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

  • Basic 1923 T-Bucket Frame Kit w/ Deluxe Body, No Floor
    Basic 1923 T-Bucket Frame Kit w/ Deluxe Body, No Floor
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    Body Dimensions

    • Total Length:  52"
    • Firewall Width:  26.5"
    • Body Width:  45"
    • Body Height:  24"

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

Goto Previous PagePrevious Page
1 2