Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"open wheel kit" Page 1 of 25

  • Porting Kit
    $29.99
    Product Rating: 4.50 Stars
    Porting Kit
    x
                

    35-piece, complete kit includes: Grind-O-Flex abrasive flap wheel, grind polishing rolls (spiral and straight) for reaching into corners, hard-pointed stone and butterfly abrasive flaps.

    This kit uses 1/4" arbor's for all items included in the kit.

  • TI64 140 Titanium Wheel Center Bolt Kit, Hex Head Style
    TI64 140 Titanium Wheel Center Bolt Kit, Hex Head Style
    x
                

    This wheel center bolt kit contains (15) 5/16"-24 x 3/4" Ti64 button head bolts and (15) thin stainless AN washers. This kit is used for Oval and Drag race wheel centers.

    • Includes:
      • (15) 5/16"-24 x 3/4" Ti64 button head bolts
      • (15) thin stainless AN washers
    • Used for Oval and Drag race wheel centers
  • TI64 382 Titanium Mini-Sprint Wheel Center Bolt Kit
    TI64 382 Titanium Mini-Sprint Wheel Center Bolt Kit
    x
                

    This wheel center bolt kit contains (12) 1/4"-28 x 3/4" Ti64 hex head bolts. This kit is used for Oval and Drag race wheel centers.

    • Includes:
      • (12) 1/4"-28 x 3/4" hex head bolts
    • Used for Oval and Drag race wheel centers
  • TI64 220 Titanium Wheel Center Bolt Kit, Button Head Style
    TI64 220 Titanium Wheel Center Bolt Kit, Button Head Style
    x
                

    This wheel center bolt kit contains (10) 5/16"-24 x 3/4" Ti64 button head bolts and (10) thin stainless AN washers. This kit is used for Oval and Drag race wheel centers.

    • Includes:
      • (10) 5/16"-24 x 3/4" Ti64 button head bolts
      • (10) thin stainless AN washers
    • Used for Oval and Drag race wheel centers
  • Wilwood 140-13502 Dynapro Single Right Rear Brake Kit, 10.2 Inch Alum. Rotor
    New
    Wilwood 140-13502 Dynapro Single Right Rear Brake Kit, 10.2 Inch Alum. Rotor
    x
                

    The Dynapro Single Right Rear Sprint & Midget kits are a further evolution of a proven design from Wilwood’s 35+ years of engineering and producing the best open wheel braking systems. Dynapro single calipers have full 2.40 square inches of area for increased clamping force. Right Rear Kits contain Aluminum rotors for maximizing weight saving and maximizing brake torque. Right Rear brakes can also provide ‘loading’ the rear suspension for additional handling. Kits come complete with caliper, brake pads; caliper mounting brackets, caliper mount bolt kit and rotor.

    • Caliper:
      • Dynapro Single
      • Nickel plate finish
      • 2 piston
      • 2.40" piston area
      • Stainless piston
      • Lug mount type
      • 3" brake pad area
      • Polymatrix Q pad compound
    • Rotor:
      • Aluminum
      • Drilled
      • Black Electro coat
      • 10.2" O.D.
      • 0.31" width
      • Solid vane

    Note: This brake kit has an axle offset of 0

    14013502 Brake Kit Assembly Schematic

  • Wilwood 140-13501 Dynapro Single Right Rear Brake  Kit
    New
    Wilwood 140-13501 Dynapro Single Right Rear Brake Kit
    x
                

    The Dynapro Single Right Rear Sprint & Midget kits are a further evolution of a proven design from Wilwood’s 35+ years of engineering and producing the best open wheel braking systems. Dynapro single calipers have full 2.40 square inches of area for increased clamping force. Right Rear Kits contain Aluminum rotors for maximizing weight saving and maximizing brake torque. Right Rear brakes also provide ‘loading’ the rear suspension for additional handling.

    Kits come complete with:

    • Caliper brake pads
    • Caliper mounting brackets
    • Caliper mount bolt kit and rotor

    Calipers:

    • Dynapro Single
    • 2 piston count
    • Stainless piston type
    • Lug mount type
    • Nickel Plate finish

    Rotors:

    • 10.95" diameter
    • 0.31" width
    • Aluminum
    • Drilled style
    • Black Electro Coat surface finish
    • Solid vane count

    Note: This brake kit has an axle offset of 0

    14013501 Brake Kit Assembly Schematic

  • Wilwood 140-12956 Sprint Racing Aluminum Left Front Brake Kit
    New
    Wilwood 140-12956 Sprint Racing Aluminum Left Front Brake Kit
    x
                The Dynapro Single Left Front Sprint & Midget kits are a further evolution of a proven design from Wilwood’s 35+ years of engineering and producing the best open wheel braking systems. Dynapro single calipers have full 2.40 square inches of area for increased clamping force. Kits are offered with either Scalloped Alloy Steel Rotors for high heat or Aluminum rotors for maximizing weight saving on light braking tracks. Kits come complete with caliper, brake pads, caliper mounting brackets, caliper mount bolt kit, rotor and rotor mounting hardware. 
    • Dynapro single caliper Nickel plated
    • 10.95" aluminum drilled rotor
    • Includes bracket, bolts, and pads
    • Caliper:
      • Type:  Dynapro Single
      • Finish:  Nickel Plated
      • Piston Count:  2
      • Piston Type:  Stainless
      • Mount Type:  Lug
      • Pad Compound:  Polymatrix Q
    • Rotor:
      • Type:  Aluminum
      • Style:  Drilled
      • Finish:  Black Electro Coat
      • Material:  Aluminum
      • Diameter:  10.95"
      • Width:  .310"
      • Vane Count:  Solid
      • Design Type:  Aluminum
  • Wilwood 140-12957 Sprint Racing Steel Left Front Brake Kit
    New
    Wilwood 140-12957 Sprint Racing Steel Left Front Brake Kit
    x
                The Dynapro Single Left Front Sprint & Midget kits are a further evolution of a proven design from Wilwood’s 35+ years of engineering and producing the best open wheel braking systems. Dynapro single calipers have full 2.40 square inches of area for increased clamping force. Kits are offered with either Scalloped Alloy Steel Rotors for high heat or Aluminum rotors for maximizing weight saving on light braking tracks. Kit come complete with caliper, brake pads, caliper mounting brackets, caliper mount bolt kit, rotor and rotor mounting hardware. 
    • Dynapro single caliper Nickel plated
    • 11" scalloped steel drilled rotor
    • Includes bracket, bolts, and pads
    • Caliper:
      • Type:  Dynapro Single
      • Finish:  Nickel Plated
      • Piston Count:  2
      • Piston Type:  Stainless
      • Mount Type:  Lug
      • Pad Compound:  Polymatrix B
    • Rotor:
      • Type:  Steel
      • Style:  Drilled
      • Finish:  Black Electro Coat
      • Material:  Steel
      • Diameter:  11"
      • Width:  .310"
      • Vane Count:  Solid
      • Design Type: Steel Scalloped
  • MPD Racing 087200-36 Midget Axle 36 Spline Spacer Kit-Aluminum, Sprint
    MPD Racing 087200-36 Midget Axle 36 Spline Spacer Kit-Aluminum, Sprint
    x
                

    MPD Racing's new Midget Axle Spacer System utilizing a split cone spacer allows you to move the wheel in or out without going to your jack handle looking for the right size spacer. Once you have the spacing correct, you simply move the existing spacers from the inside of the wheel to the center of the split cone or vise versa.

    Kit includes the following:

    • Split cone
    • Two of the 1/4" spacers
    • Four 1/2" spacers

    Note: Most cars will require an additional spacer between the system and the birdcage

     

  • MPD Racing 087200-31 Midget Axle 31 Spline Spacer Kit-Aluminum, Sprint
    MPD Racing 087200-31 Midget Axle 31 Spline Spacer Kit-Aluminum, Sprint
    x
                

    MPD Racing's new Midget Axle Spacer System utilizing a split cone spacer allows you to move the wheel in or out without going to your jack handle looking for the right size spacer. Once you have the spacing correct, you simply move the existing spacers from the inside of the wheel to the center of the split cone or vise versa.

    Kit includes the following:

    • Split cone
    • Two of the 1/4" spacers
    • Four 1/2" spacers

    Note: Most cars will require an additional spacer between the system and the birdcage

  • Wilwood 140-12958 Dynapro Single Midget Alum Left Front Brake Kit
    New
    Wilwood 140-12958 Dynapro Single Midget Alum Left Front Brake Kit
    x
                

    The Dynapro Single Left Front Sprint & Midget kits are a further evolution of a proven design from Wilwood’s 35+ years of engineering and producing the best open wheel braking systems. Dynapro single calipers have full 2.40 square inches of area for increased clamping force.  Kits come complete with caliper, brake pads, caliper mounting brackets, caliper mount bolt kit, rotor and rotor mounting hardware.

    • Nickle plated dynalite single caliper
    • 10.2" drilled aluminum front rotor
    • Complete with brake pads, brackets, and bolts
    • Caliper:
      • Type:  Dynapro Single
      • Finish:  Nickel Plated
      • Piston Count:  2
      • Piston Type:  Stainless
      • Mount Type:  Lug
      • Pad Compound:  Polymatrix Q
    • Rotor:
      • Type:  Aluminum
      • Style:  Drilled
      • Finish:  Black Electro Coat
      • Material: Aluminum
      • Diameter:  10.20"
      • Width:  .310"
      • Vane Count: Solid
      • Design Type:  Aluminum
  • Speedway High Lift Spring Kit, 1.253 Inch O.D.
    Speedway High Lift Spring Kit, 1.253 Inch O.D.
    x
                

    S/B Chevy high lift spring kit for solid lifter cams. Kit includes 16 springs (single w/ damper) and 16 steel retainers for use with 7° locks.

    • 1.253" diameter
    • .600" max lift
    • 116 lbs. at 1.80" assembled height
    • 341 lbs. open
    • Solid at 1.16"
  • TI64 187 Titanium Beadlock Bolt Kit, 1/4 Inch-20 x 1 Inch, Micro Sprint
    TI64 187 Titanium Beadlock Bolt Kit, 1/4 Inch-20 x 1 Inch, Micro Sprint
    x
                This 24pc kit of (12) hex flange bolts and (12)  thin steel nuts is arguably the best titanium investment for Micro  Sprint Racers. Not only do these meet our $200/lb-saved rule of thumb,  but the large rotating diameter where these bolts are applied makes for  exceptional return-on-investment in speed!
    • 12 of 1/4"-20 x 1", Hex Head Bolt
    • 12 of 1/4" AN Thin Washer, Steel
  • Cleco Tool, Fasteners, and Clamp Kit
    Cleco Tool, Fasteners, and Clamp Kit
    x
                

    A real time saver when installing body and interior kits. Eliminates need to drill into body. Vise head grips up to 9/16". The Cleco pliers are quality-made, unique tools that readily install and remove Cleco fasteners.

    Cleco pins are a definite must for sheet metal fabrication. They're basically spring-loaded, removable pop rivets that allow you to hold two pieces of sheet metal together in proper alignment for drilling or riveting. They work great for Circle Track use for test-fitting panels before they're permanently attached to your vehicle.

    The pins work with thicknesses of up to 1/4 in.

    Cleco Tool, Fasteners, and Clamp Kit:

    • (1) one tool
    • (20) twenty 3/16" clecos
    • (1) one clamp 

     

  • Aero Race Wheels 54-500003 Beadlock Ring Bolt Kit
    Aero Race Wheels 54-500003 Beadlock Ring Bolt Kit
    x
                Attach your beadlocks the right way with these bolt kits  from Aero Race Wheels.  They are for the outer beadlock rings on Aero wheels only and are direct replacements to make sure that you get the correct hardware the first time. 
    • Used to attach beadlock ring to wheel
    • 3/4" long
    • Zinc finish
    • Includes:
      • (16) 5/16"-18 flange bolts
  • Seat Belt Installation Kit
    $3.99
    Seat Belt Installation Kit
    x
                

    Don't jeopardize your safety with a hodge-podge of hardware store pieces. This kit is specifically engineered to securely mount your seat belts.   

    Kit includes:

    • (2) 7/16"-20 x 1-1/2" SAE fine thread bolts
    • (2) 7/16"-20 nuts
    • (2) lock washers
    • (2) 2.44" O.D. large flat 11-gauge washers
  • Conroy Pneu Diaphragm Bleeder Rebuild Kit
    Conroy Pneu Diaphragm Bleeder Rebuild Kit
    x
                This bleeder rebuild kit allows you to repair any Conroy Pneu Diaphragm style bleeder. Kit includes 2 bleeder inserts, 2 diaphragms, and 3 ft. of nylon hose.
            
  • Ford F-100 Brake to 1937-48 Spindle Bearing Conversion Kit
    Ford F-100 Brake to 1937-48 Spindle Bearing Conversion Kit
    x
                

    Kit allows you to install 1953-1956 Ford F-100 11" x 2" drum brakes on your 1937-1948 Ford car spindles. Kit includes new bearings and seals to allow conversion. 

    You must supply 1953-1956 F-100 front backing plates, hubs and 1953-1966 brake drums. Minor grinding required on 1937-1941 spindles.

    Tech Tip: If replacing all brake hardware, 1966 F-100's had self adjusting brakes.

    916-31934 Instructions (PDF)

  • RapidAir M3800 Master Air Line Kit, 1/2 Inch Line
    RapidAir M3800 Master Air Line Kit, 1/2 Inch Line
    x
                These airline kits work great for your workshop with  applications from  automotive to woodworking. This is a complete  compressed air  distribution system that is designed to easily install within new walls  or on wall surfaces of existing  workshops/garages.  These kits allow  you to put air lines exactly where  you want them, just like electrical  outlets.   No more dragging hoses  across the shop to your work area.    No special tools required, simply push the flexible tubing into the  fittings and put up your system in an afternoon.
    • 1/2" line 
    • Operating pressure: 175psi at 70° F / 140psi at 140° F
    • Meets OSHA guidelines
    • Temperature range: -40° F to 140° F
    • Compatible with common compressor oils

    Kit Includes:  

    • 100 ft. of 1/2" ID Tubing
    • 3 Outlets
    • 1 Manifold
    • 5 Elbows
    • 1 Tee
    • Tools     (air chuck & filter regulator sold separately)

    Airline Installation Manual (PDF)

    RapidAir Maxline Warranty (PDF)

  • Plastic AN Cap and Plug Kit - 72 Pieces
    Plastic AN Cap and Plug Kit - 72 Pieces
    x
                

    If you don't have one of these kits, get one now. Includes six each cap and plug for AN 3, AN 4, AN 6, AN 8, AN 10 and AN 12.

  • M&W KPBK-100 Ford Roller Torsional-Thrust Bearing Kit
    M&W KPBK-100 Ford Roller Torsional-Thrust Bearing Kit
    x
                Torsional bearing kit fits between spindle and axle to eliminate binding.  One kit required per spindle. The ID is 0.885" and the total thickness of the bearing and 2 washers is 0.140" thick.
            
  • Swivel Spline Driveline Installation Kit, Steel Gun Drilled
    Swivel Spline Driveline Installation Kit, Steel Gun Drilled
    x
                

    Complete swivel spline drive shaft kit. Must be ordered for the correct length drive line.  We stock 40" drive lines in Gun drilled steel or titanium.  Kit Includes items #9 thru #18 on this Part Number Reference Chart (GIF)

    This kit does not include torque tube, u-joint or torque ball. 

  • QA1 7888-109 Coil-Over Thrust Bearing Kit
    QA1 7888-109 Coil-Over Thrust Bearing Kit
    x
                

    This kit installs at the bottom of the 2-1/2" I.D. coil-over spring and allows easier adjustment of your ride height.

    • Includes two bearings and four washers
    • Kit services two coilovers
    • 2.512" I.D.
    • 3.233" O.D.
  • Wing Slider Kevlar Hose Kit
    $59.99
    Wing Slider Kevlar Hose Kit
    x
                

    New kit supplies you with hoses and fittings to plumb your valve to your cylinder. Kit comes with two hoses, two 90 degree fittings for the wing cylinder, and four fittings for the valve.

    Due to variances in steering gears, you will have to pick out length of hoses you need for your pressure and return lines. Available in either braided or Kevlar. This kit fits most cars (Eagle, J&J, Maxim, etc.) utilizing an 8" or 10" stroke cylinder.

    Kevlar Slider Hose 940-1895

    • (2) 90° flare -4 to 1/8" NPT
    • (4) #4 flare to 1/8" NPT
    • (1) 24" kevlar line
    • (1) 38" kevlar line
  • Wilwood High Volume Master Cylinder Rebuild Kits
    Wilwood High Volume Master Cylinder Rebuild Kits
    x
                

    Rebuild kit for Wilwood high volume master cylinders. Contains piston, seals, snap ring, push rod, lid gasket and replacement dust boot assembly. All parts necessary for maintenance and repair of your master cylinder.

  • RACEceiver Track Communication Semi-Pro Kit
    RACEceiver Track Communication Semi-Pro Kit
    x
                

    More and more tracks are using the RACEceiver to allow officals to keep the drivers informed of accidents and line-up on restarts. It saves time and lives. It includes a holster clip and uses AAA batteries. Operates in the 450-470 mhz range.

    The in-car box is for drivers who would like to mount the RACEceiver inside the car. This box will house your RACEceiver and mounts easily inside your car on the roll bar, or wherever you choose. It gives your RACEceiver additional protection.

    This set includes the RACEceiver, 'Semi-pro' ear piece, and car box!

    • Allows officals to keep the drivers informed of accidents and line-up on restarts
    • Saves time and lives
    • Includes a holster clip and uses AAA batteries
    • Operates in 450-470 mhz range
    • RACEceiver, 'Semi-pro' ear piece, and car box

     

  • Molecule Labs MLWK161 Nomex Wash Kit
    Molecule Labs MLWK161 Nomex Wash Kit
    x
                

    Includes 16 oz. Wash and 16 oz. Spot

    Molecule Wash 16 oz.  Effectively cleans Nomex fabric (and other technical fabrics) in standard washing machines. It is formulated specifically for the critical requirements of Nomex racing suits. And it is expressly designed to remove the unique oils, fuel, and soils that are often encountered in the racing environment. Plus it contains an antimicrobial agent to inhibit the growth of bacterial odors, so you'll feel fresh longer.

    Molecule Spot 16 oz.  Cleaner penetrates deeply into Nomex fabric to safely dissolve and suspend tough spots and stains. Powerful ingredients quickly break down stains that can degrade fabric performance. Concentrated formula penetrates deeply.

    Learn how to properly clean and maintain your racing suit by reading our tech article. Racing Suit Cleaning and Care.

      

  • Fuel Pump Installation Kit, Walbro GL392
    Fuel Pump Installation Kit, Walbro GL392
    x
                You cannot properly install your new fuel pump without the necessary fittings.  This hardware kit is for installation of Walbro GL392 inline racing fuel pump (960-392).
    • Installation of Walbro GL392
    • Kit includes:
      • (2) two brass rings
      • (2) two nuts
      • (2) two star washers
      • (2) two closed-end wire connector/terminals

     

  • Richmond Gear 92-0690-2800 Powertrax Ford 9 Inch Locking Differential
    Richmond Gear 92-0690-2800 Powertrax Ford 9 Inch Locking Differential
    x
                

    The Powertrax Traction System is the latest design in traction adding differential technology. It combines the smooth operation of a limited-slip differential, with the traction performance of a locking differential. A precise synchronization mechanism eliminates the ratcheting sounds typical of other locking differentials. Special gear and spring design reduce the backlash and therefore driveline windup. An ultra-strength alloy material is used throughout, which is 67% stronger than titanium.

    Installation is simple because no ring and pinion set-up is required. In addition, no special tools or oils are needed (installs in about one hour). Step by step model specific instructions are provided with every kit.

    • Positive traction - full locker
      • Delivers engine power to both wheels when coming off the line
      • Upgrade and improve your times and your vehicles reputation 
    • Smooth quiet operation - fully automatic
    • Do-it-yourself - installs in about one hour
    • No special tools required
    • Works for both cars and trucks
    • Gives 2-wheel drive trucks the traction power of 4x4's
    • Excellent replacement for Trac loc style lockers
  • Fuel Safe SB225DT 25 Gallon Sprint Car Tank Kit, 12 AN Top with Baffle
    Fuel Safe SB225DT 25 Gallon Sprint Car Tank Kit, 12 AN Top with Baffle
    x
                Fuel Safe has long been the leader in Sprint Car tanks and bladders.  All bladders meet stringent safety requirements and are serial numbered.  Speedway now offers tank kits with or without the anti-surge baffle and the new popular collector options.  All tanks have molded in mounts for all current Sprint Cars.  Tank kits comes complete with pickup and upper plate with cap and vent.  For use with alcohol fuel only.
            
  • Radiator Neck Kit
    $19.99
    Product Rating: 4.00 Stars
    Radiator Neck Kit
    x
                

    These aluminum hose neck kits make it easy to rebuild your aluminum radiator. Includes a 1-1/2" and a 1-3/4" neck, weld-in 1/4" NPT fitting, hose barb and petcock. Fabrication and aluminum welding required.

    • 1-3/4" tube = 3" long
    • 1-1/2" tube = 2-1/2" long
  • Braided Pressure Gauge Line Kit
    Braided Pressure Gauge Line Kit
    x
                This braided pressure gauge line kit makes it a snap to hook up your pressure gauge.  Can be used with oil, water, fuel or air. Includes AN 4 braided line,  AN4 to 1/8" NPT male and AN4 to 1/8" NPT female. Choose from lengths of  25", 36" or 48".
            
  • Stainless Steel Polishing Kit
    Stainless Steel Polishing Kit
    x
                

    These high quality polishing kits are designed specifically for use on stainless steel surfaces. They are sure to give any stainless steel a brilliant, mirror smooth finish.

    Kit Contains:

    • Black, Brown, and Green polishing compounds (1 Each)
    • Mushroom, cylinder, and tapered buff pad (1 Each)
    • (5) different shaped felt bobs
    • (2) spiral sewn mounted buff pads
    • (1) single stitched mounted buff pad 

    91012455 Material Safety Data Sheet (PDF)

  • Performance Tool 45214 125-Piece Assorted Rubber Grommet Kit
    Performance Tool 45214 125-Piece Assorted Rubber Grommet Kit
    x
                

    These rubber grommet assortment kits are the perfect solution for running wires through your firewall.  They are designed to keep wires or any other materials from rubbing on steel or aluminum and allow you to pass fuel line, cables, and wiring neatly through body panels without the risk of damage.

    Rubber Grommet Kit

    • 125 Piece Assortment
    • Clear plastic divider case
  • QA1 1891-103 Adjustable Ball Joint Tool Kit
    QA1 1891-103 Adjustable Ball Joint Tool Kit
    x
                

    QA1’s patented Ultimate Ball Joints are 100% owner rebuildable. Adjustment tool kit and multiple stud lengths are available.

    Kit includes:

    • Tool Wrench Spanner
    • Tool Allen Hex Key
  • Kirkey 99300 Molded Foam Seat Insert Kit
    $254.99
    $279.99
    Kirkey 99300 Molded Foam Seat Insert Kit
    x
                
    • Designed to add form fitting high-density padding to the bottom and lower lumbar of your current seat
    • Includes everything you need in this kit
    • Kit is designed to be used with a seat that fits the driver properly as is
    • If your seat is too large for you already you will need to purchase a second kit
  • AFCO 7242-0092 F88i Series 1.25 Inch Caliper Bridge Bolt Kit
    AFCO 7242-0092 F88i Series 1.25 Inch Caliper Bridge Bolt Kit
    x
                

    Assorted Service Parts for F88i Series Calipers made by US Brake.

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

    Caliper Piston Tech Note (Link)

     

  • Wilwood 300-11789 Dynalite Single Caliper Rebuild Kit
    Wilwood 300-11789 Dynalite Single Caliper Rebuild Kit
    x
                

    Wilwood Dynalite Single brake caliper rebuild kit.

    Wilwood Dynalite Dimensions (Link)

  • 4 PC Mini-Sprint Splined Spacer Kit
    4 PC Mini-Sprint Splined Spacer Kit
    x
                Four 30° tapered axle spacers for 27 spline axles. Lengths include: 2 – 3/4”, 1 – 1”, and 1 – 2”. 
            
  • Competition 2 Inch Dish Steering Wheel, Stainless Steel, 15 Inch
    Competition 2 Inch Dish Steering Wheel, Stainless Steel, 15 Inch
    x
                

    These 15" competition-style steering wheels have a 4-spoke stainless steel frame and a black foam cushion on the outer rim. Has a 2" dish with the standard-of-the-industry Grant 3-bolt pattern.

    • Four stainless steel spokes
    • Black foam cusion grip
    • 2" dish 
    • Grant 3-bolt pattern

    Note: This steering wheel comes with a horn button, but NO WAY to retain it. Purchase adapter kit 410-10112 to retain the horn button to the wheel for a "non-fuctional" horn button, or use adapter kit 410-3196 to fit GM, Ididit, or Flaming River columns for a "functional" horn button.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 25