Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"nova rack pinion conversion" Page 1 of 1

New (0)

Garage Sale (0)

  • Unisteer 8000930-01 1962-1967 Chevy II/Nova Manual Rack & Pinion Kit
    Unisteer 8000930-01 1962-1967 Chevy II/Nova Manual Rack & Pinion Kit
    x
                

    These rack & pinion conversion kits will finally give your 62'-67' Chevy II or Nova the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety. The manual rack & pinion has been modified to match the front suspension of the Chevy II/Nova, the resulting rack & pinion is geometrically correct offering no or negligible bump steer.

    Installation is easy, the rack & pinion comes mounted to its custom mounting bracket that bolts up to the existing engine mounts. No welding or cutting involved!

    Kit includes:

    • Manual Rack & Pinion
    • Black Powdercoated Mounting Bracket
    • Steering Arms
    • Tie Rod Ends

     

  • Unisteer 8000770-01 1967-74 GM Manual Rack & Pinion Conversion Kit
    Unisteer 8000770-01 1967-74 GM Manual Rack & Pinion Conversion Kit
    x
                

    This rack & pinion conversion kit will finally give your classic 1967-69 Camaro or Firebird the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety. This rack is specifically designed and built for the Camaro so that it matches the factory steering geometry. The result is very little bump steer!

    The rack comes mounted on the brackets which makes installation a breeze. The unit mounts to the rear of the cross member, bolting to the lower stock control arm bolts. The outer tie rod ends are bolted to the stock steering arms. No fabrication required!

    Small, compact, offers maximum ground clearance, and can drop up to 65 lbs. off the stock front end.

    Kit includes:

    • Manual Rack & Pinion
    • Mounting Bracket
    • Outer Tie Rods
    • Hardware
    • Installation Instruction Sheet
    Fits
    • 1967-69 Camaro/Firebird
    • 1968-74 Nova X-Body 
    Instruction Manual (PDF)
  • Unisteer 8010540-01 1967-74 GM Power Rack & Pinion Kit
    Unisteer 8010540-01 1967-74 GM Power Rack & Pinion Kit
    x
                

    This rack & pinion conversion kit from Unisteer will give your Nova the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety.

    The mounting bracket attaches to the bottom two control arm bolts on the rear of the crossmember. To install, simply remove the existing bolts and replace with the provided longer bolts, bolting the rack up into position. Then unbolt the stock steering arms and replace them with the new steering arms provided and attach the provided outer tie-rod ends, and that is it.

    • Matches stock steering geometry - little to no bump steer
    • Complete bolt on kit - no welding or chassis modification required
    • Works with both big block and small block engines
    • Kit comes standard in black powder coat
    • Works with factory steering pump (new lines required, see Notes)

    Power racks use the 17mm DD spline.  Will work with both B/B and S/B engines. 

    Fits

     

    • 1967-69 Camaro
    • 1968-74 Nova X-Body 

     

    Instructions (PDF)