Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"mustang spindle nut kit" Page 1 of 1

  • Pinto-Mustang II Spindle Nut & Washer Kit
    Pinto-Mustang II Spindle Nut & Washer Kit
    x
                Complete kit for 2 spindles; nuts, washers, cotter pins.  For 1974-80 Pinto, Bobcat and Mustang II. Thread size of nut: 13/16"-20
            
  • 1932 Lo-Boy Roadster Spindle Kit
    1932 Lo-Boy Roadster Spindle Kit
    x
                

    This kit mounts 1949-1954 Chevy spindles and Pinto/Mustang II disc brakes to your '32 Lo-Boy front axle.  Spindles are machined for Pinto/Mustang II 9-1/4" rotors. Kit includes spindles, kingpins, caliper brackets & hardware. 

    Kit includes:

    • (2) 49-54 Chevy spindles
    • (1) kingpin set
    • (1) Pinto rotor to Chevy spindle brake adapter kit
    • (2) Set screws, 1/4" UNC
    • (1) Spindle nut set

     

  • Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  

    • For 48" kingpin-to-kingpin axles
    • Traditional steering arm for left front wheel NOT included with Traditional steering kit
    • Available with 5x4.5" or 5x4.75" hubs

    Spindle Identification Guide (GIF)

  • Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                Please view the product's page for more information
            
  • AFCO 10 Inch Hybrid Brake Rotor Conversion Kit
    AFCO 10 Inch Hybrid Brake Rotor Conversion Kit
    x
                

    AFCO 10" hybrid front brake rotor conversion for Pinto/Mustang II spindles. For anyone wanting to switch over to the lighter Pinto spindle and Hybrid rotor set-up. Rotors have 5 x 5" bolt pattern.  This kit is not to be used for asphalt, pavement, or drag racing applications.

    Includes:

    • 5 on 5" IMCA approved AFCO hybrid 10" brake rotors
    • AFCO GM Metric caliper brackets and hardware
    • Bearing and seal kit
    • Dust caps and spindle nut kit
    This brake kit is designed for dirt circle track applications only.
  • Track-T Chevy Spindle & Brake Bracket Kits
    Track-T Chevy Spindle & Brake Bracket Kits
    x
                

    This kit mounts 1949-1954 Chevy spindles and Pinto/Mustang II disc brakes to your Track-T front axle.  Spindles are machined for Pinto/Mustang II 9-1/4" rotors.

    Kit includes:

    • (2) 49-54 Chevy spindles
    • (1) kingpin set
    • (1) Pinto rotor to Chevy spindle brake adapter kit
    • (2) Set screws, 1/4" UNC
    • (1) Spindle nut set
  • Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Speedway 1949-1954 Chevy Car Modified Spindles w/ King Pins
    Speedway 1949-1954 Chevy Car Modified Spindles w/ King Pins
    x
                

    Speedway has produced these new forged steel reproduction car spindles. They have many features not available with GMs' original design! These spindles are the choice of professional builders because of their clean look, strength and ease of installation.

    • Made to direct mount Mustang II hubs and rotors plus many other later GM's
    • Kingpin geometry changed to work with current radial tire construction
    • Includes many features not found on GM's original design
    • Forged steel (not cast) reproduction spindles
    • Kit includes pair of new spindles with new kingpins fit to spindle
    • Spindle nuts NOT included (sold separately)

    Spindle Identification Guide (GIF)

  • Speedway 1949-54 Chevy Car Modified Spindles w/ Deluxe King Pins
    Speedway 1949-54 Chevy Car Modified Spindles w/ Deluxe King Pins
    x
                

    Speedway has produced these new forged steel reproduction car spindles. They have many features not available with GMs' original design! These spindles are the choice of professional builders because of their clean look, strength and ease of installation.

    • Made to direct mount Mustang II hubs and rotors plus many other later GM's
    • Kingpin geometry changed to work with current radial tire construction
    • Deluxe kingpins feature modern needle bearing inserts that replace the standard brass bushings
    • Deluxe kingpins are ideal for use on heavier street rods that require superior strength, better lubrication and easier steering
    • Spindle nuts NOT included (sold separately)

    Spindle Identification Guide (GIF)

  • Speedway 1927 Track-T Roadster Kit
    Speedway 1927 Track-T Roadster Kit
    x
                

    With their exciting, racy styling, Track T roadsters are some of the most recognizeable hot rods in American automotive history. Designed for nostalgic originality, Speedway’s Track-T Roadster is an economical way to relive that vintage motoring spirit. This kit car turns heads wherever it goes with its beautiful, one-piece 1927 T body, smooth lines and custom track style nose.  The Track-T is designed to use the powertrain from 4-cylinder or V6 powered rear wheel drive vehicles.  In such a small, lightweight car they become mighty spirited performers.

    The 1927 Track-T basic kit includes a 1927 Model T Roadster body with right and left full length side frame covers and custom floor with transmission tunnel.  It also comes with a passenger compartment rear bulkhead divider, street rodder nose, rear roll pan, smooth flat cowl/firewall and front shock mounts.  Headlight mounts, hood top, and aluminum hood sides are also included. The storage compartment behind the seat is even large enough to accept 2-3 suitcases, or a large cooler & picnic basket. 

    The rigid tube steel chassis features front & rear kick-ups for a lower ride height and includes pre-mounted suspension bracketry. The chassis is built to accomodate a traditional spring-over, tube axle front suspension with Hairpin radius rods, Vega cross steering, and '49-'54 Chevy spindles. Rear suspension mounts will

  • Garage Sale - Mustang II Spindle Nut Kit
    Garage Sale
    Garage Sale - Mustang II Spindle Nut Kit
    x
                

    This kit is garage sale priced because it is different than what we currently offer.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS