Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"mustang front disc" Page 1 of 2

  • Mustang II Complete 11 Inch Front Disc Brake Kit, 5 on 4-3/4 Granada Type Rotor
    Mustang II Complete 11 Inch Front Disc Brake Kit, 5 on 4-3/4 Granada Type Rotor
    x
                Easily upgrade your Mustang II based suspension from the stock 9-1/4"  rotors to 11" rotors with powerful single piston GM Metric style floating  calipers. Kit requires no machining. For use on 1974-1980 Pinto, Bobcat  and Mustang II factory spindles.  
    • GM bolt pattern 5 on 4-3/4" (increases track width 1/2" per side)
    • Includes two 16" front brake hoses and 7/16"-20 banjo bolts with crush washers
    • Granada style rotors

    Front Disc Brake Installation Instructions (PDF)

  • Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-3/4
    Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-3/4
    x
                

    An economical, lightweight brake kit for 1949-54 Chevy car spindles. Your stock Chevy spindles must be machined, or use Speedway '49-'54 Chevy-style spindles. This kit uses 9-1/4" Mustang II vented rotors with common GM metric calipers.

    • Typically used on Model T and Model A to 1936 Ford front ends 
    • For use on street rod tube front axles when using 1949-54 Chevy style spindles  
    • Will not work with stock 1949-54 steering arms 
    • Not to be installed on stock 1949-54 Chevy vehicle front ends

    910-31956 Instructions (PDF)

  • Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-1/2
    Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-1/2
    x
                

    An economical, lightweight brake kit for 1949-54 Chevy car spindles. Your stock Chevy spindles must be machined, or use Speedway '49-'54 Chevy-style spindles. This kit uses 9-1/4" Mustang II vented rotors with common GM metric calipers.

    • Typically used on Model T and Model A to 1936 Ford front ends 
    • For use on street rod tube front axles when using 1949-54 Chevy style spindles  
    • Will not work with stock 1949-54 steering arms 
    • Not to be installed on stock 1949-54 Chevy vehicle front ends

    910-31955 Instructions (PDF)

  • Mustang II Disc Brake Rotor, 5 on 4-3/4 Inch
    Mustang II Disc Brake Rotor, 5 on 4-3/4 Inch
    x
                Vented stock 9-1/4" diameter brake rotors for 1974-1980  Mustang II, Pinto, or Bobcat spindles (or Speedway brake kits using  '49-'54 Chevy spindles). Brake rotors are new, not plugged or re-drilled. Has a  5 on 4-3/4" bolt pattern with corresponding 7/16" diameter fine thread  wheel studs.

    Be sure to install new bearings and seals (910-31000) with your new disc brake rotors.
  • Mustang II Complete 11 Inch Front Disc Brake Kit, 5 x 4-3/4 GM Bolt Pattern
    Mustang II Complete 11 Inch Front Disc Brake Kit, 5 x 4-3/4 GM Bolt Pattern
    x
                Easily upgrade your Mustang II based suspension from the stock 9-1/4" rotors to 11" rotors with powerful single piston GM midsize floating calipers. Kit requires no machining. For use on 1974-1980 Pinto, Bobcat and Mustang II factory spindles.  

    GM bolt pattern 5 on 4-3/4" (increases track width 1" per side). Includes two 16" front brake hoses and 7/16"-20 banjo bolts with crush washers.

    910-31943 Instructions (PDF)

  • Basic Brake Kit, GM Metric Caliper/Mustang II Rotor to Early Chevy Spindle
    Basic Brake Kit, GM Metric Caliper/Mustang II Rotor to Early Chevy Spindle
    x
                

    An economical, lightweight front disc brake conversion kit for 1949-54 Chevy car spindles. This kit uses 9-1/4" Mustang rotors with the easy-to-find '78-'88 GM metric calipers. This basic kit includes caliper brackets and hardware.

    Note: Your spindles must be machined to accept this kit, or you can use Speedway modified reproduction forged spindles 916-32100. This kit will not work with stock 1949-54 steering arms. Not to be installed on stock 1949-54 Chevy vehicle front ends. To be used only on street rod tube or I-beam front axles when using 1949-54 Chevy spindles commonly used on Model T and Model A to 1936 Ford front ends.

    916-31950 Instructions (PDF)

  • Mustang II Disc Brake Rotor, 5 on 4-1/2 Inch
    Mustang II Disc Brake Rotor, 5 on 4-1/2 Inch
    x
                Vented stock 9-1/4" diameter brake rotors for 1974-1980  Mustang II, Pinto, or Bobcat spindles (or Speedway brake kits using  '49-'54 Chevy spindles). Brake rotors are new, not plugged or re-drilled. Has a  5 on 4-1/2" bolt pattern with corresponding 1/2" diameter fine thread  wheel studs. 

    Be sure to install new bearings and seals (910-31000) with your new disc brake rotors.
  • Mustang II Disc Brake Kit for Early Chevy Spindles, 5 on 4-1/2 Inch
    Mustang II Disc Brake Kit for Early Chevy Spindles, 5 on 4-1/2 Inch
    x
                

    This complete brake and hub kit is designed to install 1974-80 Mustang II/Pinto rotors and calipers onto your machined Chevy 1949-54 car spindles. Disc brake kit is desigend for use only on street rod tube front axles when using 1949-54 Chevy style spindles intended for Model T and Model A to 1936 Ford front ends. This kit includes two 9-1/4" rotors with a Ford bolt pattern.

    • 9-1/4" brake rotor, 5 x 4-1/2" wheel bolt pattern
    • Pinto/Mustang iron calipers, 7/16"-24 inlet
    • 16" rubber brake lines
    • Zinc plated dust caps
    • All necessary brackets, adapters, bearings, seals, and hardware
    • Instructions included

    Note: Will not work with traditional style steering (no room for upper steering arm). Will not work with stock 1949-54 steering arms. Not to be installed on stock 1949-54 Chevy vehicle front ends.

    910-31947 Instructions (PDF)

  • 1932 Lo-Boy Front Disc Brake Kit
    1932 Lo-Boy Front Disc Brake Kit
    x
                

    This brake kit includes Mustang II/Pinto brake components to fit the '32 Lo-Boy 1949-54 Chevy spindles. Kit features 9-1/4" iron rotors, rebuilt single piston calipers, pads, stainless braided AN 4 brake lines, fittings, & hardware.

    NOTE: Kit includes rotors with 5 on 4.5" bolt pattern. If you need the 5 on 4.75" bolt pattern, please specify this in the Comments box on the Order Summary/Payment Info page (page 2) when checking out.

     

  • Bilstein AK1199 Street Stock Shocks, 1987-93 Mustang, Front Strut
    Bilstein AK1199 Street Stock Shocks, 1987-93 Mustang, Front Strut
    x
                

    The technology that has made Bilstein a winner in Winston Cup, Indy Car and Formula 1 is now available to the grassroots level hobby stock and street stock racer. Bilstein mono tube gas shocks use deflective disk valving to give more precise and consistent valving. Plus, their rugged construction and precisely machined finishes ensure a long performance life. These shocks may cost more initially but they pay off in the winner's circle!

    • Monotube body dissipates heat more effectively than twin-tube designs
    • Nitrogen gas puts shock oil under pressure to totally prevent shock fade
    • Allows for more precise, consistent set-ups
    • Weight transfer when you need it
    • Tires will stay on the track through the rough spots
    • Better control under braking
    • Front Strut
      • 15.94" compressed
      • 21.28" extended
  • Wilwood 140-1013-B Drag Front Brake Kit for Mustang II
    Wilwood 140-1013-B Drag Front Brake Kit for Mustang II
    x
                

    Wilwood Forged Dynalite Front Drag Brake Kit offers a complete disc brake upgrade solution for Mustang II-equipped drag race application under 2800 lbs. Based on the venerable forged billet 4-piston Dynalite caliper, these versatile kits suit the braking requirements and style preferences for an off road drag racing application. 

    Calipers mount directly to the spindle with a bolt-on aluminum bracket. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock disc brakes. Kits include all new hardware, wheel bearings, seals, brake pads, brackets, and extra length lug studs.

    Aluminum hubs drilled to accept both 5-on-4-1/2" and 5-on-4-3/4" bolt patterns. 

    • Forged 4-piston Dynalite Calipers
    • 10.75" diameter solid steel rotors - black oxide finish
    • Wilwood BP-10 SmartPads - low noise, low dust
    • Lightweight clear anodized aluminum hubs

    835-1401013 Instructions (PDF)

  • Wilwood 140-11017 Heavy Duty Front Brake Kit for Mustang II
    Wilwood 140-11017 Heavy Duty Front Brake Kit for Mustang II
    x
                

    Wilwood Forged Dynalite Front Pro Series Brake Kits offer a complete disc brake upgrade solution for Mustang II-equipped street rods and classic pickups. Based on the venerable forged billet 4-piston Dynalite caliper, these versatile kits suit the braking requirements and style preferences for a daily driver, serious competition, or the most discriminating show enthusiast. 

    Calipers mount directly to the spindle with a bolt-on aluminum bracket. Forged billet, five lug hubs with direct mount cast iron rotors combine to provide a significant weight savings compared to stock disc brakes. Kits include all new hardware, wheel bearings, seals, brake pads, brackets, and extra length lug studs.

    Aluminum hubs drilled to accept both 5-on-4-1/2" and 5-on-4-3/4" bolt patterns.

    Wilwood Medium Duty Kits Feature:

    • Forged 4-piston Dynalite Calipers
    • 11" diameter Ultralite HP 30 Vane rotors - bare finish
    • Wilwood BP-10 SmartPads - low noise, low dust
    • Lightweight clear anodized aluminum hubs

    835-1408652 Instructions (PDF)

    *NOTE*: See Notes tab for important install information.
  • 1974-80 Mustang II Brakes to 1949-54 Chevy Spindles, Polished Stainless
    1974-80 Mustang II Brakes to 1949-54 Chevy Spindles, Polished Stainless
    x
                

    Our basic front disc brake conversion kit is engineered to mount 1974-80 Pinto, Bobcat, and Mustang II 9-1/4" disc brakes onto 1949-54 Chevy passenger car spindles (some machining of spindles is necessary). Mounts the caliper behind the axle and allows a minimum 13" wheel diameter.

    • Caliper brackets
    • Bearings & seals
    • All hardware

    916-31905 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • 1967-1969 Mustang Disc Brake Kit
    1967-1969 Mustang Disc Brake Kit
    x
                

    Replace those outdated and inadequate drum brakes on your Ford Mustang with this complete, easy-to-install disc brake conversion kit. This manual, non-power disc brake kit for 1967-1969 Mustang uses a 5 on 4-1/2" bolt pattern and will fit inside 14" x 7" or larger wheels.

    • Works on 6-cylinder or V8 drum brake spindles
    • Master cylinder will not bolt to stock booster on vehicles with O.E. power drum brakes
    • Fits inside 14" x 7" or larger wheels

    Kit Includes:

    • 43mm 4-Piston Calipers
    • Vented Rotors
    • Pads
    • Mounting Brackets
    • Proportioning Valves
    • Dual Bowl Master Cylinder
    • Flex Hoses
    • Lines
    • Bearings & Seals
    • All hardware included
  • 1964-1966 Mustang Disc Brake Kit
    1964-1966 Mustang Disc Brake Kit
    x
                

    Replace those outdated and inadequate drum brakes on your vintage Ford Mustang with this complete, easy-to-install disc brake conversion kit. This manual, non-power disc brake kit for 1964-1966 Mustang uses a 5 on 4-1/2" bolt pattern and will fit inside 14" x 7" or larger wheels.

    • Only works on V8 drum brake spindles. 
    • Master cylinder will not bolt to stock booster on vehicles with O.E. power drum brakes.
    • Fits inside 14" x 7" or larger wheels

    Kit includes:

    • 43mm Four-Piston Calipers
    • Vented Rotors
    • Pads
    • Mounting Brackets
    • Proportioning Valves
    • Dual Bowl Master Cylinder
    • Flex Hoses
    • Lines
    • Bearings & Seals
    • All hardware included
  • SSBC Mustang II Competition Street Series 11 Inch Disc Brake Kit
    SSBC Mustang II Competition Street Series 11 Inch Disc Brake Kit
    x
                

    Bolt-in ultra high performance disc brake conversion kit for Mustang II. Kit includes street 4-piston aluminum calipers with 45mm stainless pistons, performance brake pads, mounting brackets, 11" Big Bite cross drilled rotors, and hardware.

    • 100% Made in the USA
    • Rotors are dual pattern - 5 on 4.5" & 5 on 4.75"
    • 15" wheel compatible
    • Calipers are constructed from 6061-T6 billet aluminum
    • Assembled with stainless steel pistons and bleeder screws
    • 25% more pad contact area than other calipers with this mount
    • 20% thicker pads than other calipers with this mount
    • Dual pad pin design with o-rings to eliminate pad chatter
    • Use any off-the-shelf D43 pad from any local parts store

    Calipers are available in plain finish (clear coated) billet, fully polished, red powder coat, or black powder coat.

  • Track-T Front Disc Brake Kit
    $239.99
    Product Rating: 5.00 Stars
    Track-T Front Disc Brake Kit
    x
                

    This brake kit includes Mustang II/Pinto brake components to fit the Track-T 1949-54 Chevy spindles. Kit features 9-1/4" rotors, rebuilt single piston calipers, pads, stainless braided AN 4 brake lines, fittings, & hardware.

    NOTE: Please specify desired wheel bolt pattern (5 x 4.5" or 5 x 4.75") in the Comments box on the Order Summary/Payment Info page (page 2) when checking out. 

  • Mustang II Brake Kits for Early Chevy Spindles, GM 4.75 Pattern
    Mustang II Brake Kits for Early Chevy Spindles, GM 4.75 Pattern
    x
                

    This complete brake and hub kit is designed to install 1974-80 Mustang II/Pinto 9-1/4" rotors and calipers onto your machined Chevy 1949-54 car spindles.

    Kit features:

    • 9-1/4" brake rotor, 5 x 4-3/4" wheel bolt pattern
    • Remanufactured Pinto/Mustang iron calipers, 7/16"-24 inlet
    • 16" rubber brake lines
    • Zinc plated dust caps
    • All necessary brackets, adapters, bearings, seals, hardware and instructions included

    Note:

    • Will not work with traditional style steering (no room for upper steering arm).
    • Will not work with stock 1949-54 steering arms. Not to be installed on stock 1949-54 Chevy vehicle front ends.
    • For use only on street rod tube or I-beam front axles when using 1949-54 Chevy style spindles intended for Model T and Model A to 1936 Ford front ends.

    910-31948 Instructions (PDF)

  • Basic Kit 1974-80 Mustang II Brakes to 1949-54 Chevy Spindles, Plain Steel
    Basic Kit 1974-80 Mustang II Brakes to 1949-54 Chevy Spindles, Plain Steel
    x
                

    Our basic front disc brake conversion kit is engineered to mount 1974-80 Pinto, Bobcat, and Mustang II 9-1/4" disc brakes onto 1949-54 Chevy passenger car spindles (some machining of spindles is necessary). Mounts the caliper behind the axle and allows a minimum 13" wheel diameter.

    • Caliper brackets
    • Bearings & seals
    • All hardware

    916-31905 Instructions (PDF)

  • Mustang II Complete 11 Inch Brake Kit, Ford 5 x 4-1/2 Bolt Pattern
    Mustang II Complete 11 Inch Brake Kit, Ford 5 x 4-1/2 Bolt Pattern
    x
                Upgrade your Mustang II based suspension from the stock 9-1/4" rotors to our 11" rotors with powerful single piston GM metric floating calipers. This simple bolt-on conversion requires no machining. For use on 1974-80 Pinto, Bobcat and Mustang II spindles.

    Features a 5 on 4-1/2" Ford/Mopar wheel bolt pattern (increases track width 1/2" per side). Includes two 16" front brake hoses and 7/16"-20 banjo bolts with crush washers.

    910-31944 Instructions (PDF)

  • 11 Inch Mustang II Rotor with GM 4.75 Inch Bolt Circle, Metric Caliper
    11 Inch Mustang II Rotor with GM 4.75 Inch Bolt Circle, Metric Caliper
    x
                This rotor allows the use of GM Metric calipers along with a GM car bolt pattern. Vented stock 11" diameter brake rotors for 1974-1980  Mustang  II, Pinto, or Bobcat spindles (or popular GM Metric calipers and brackets). Brake rotors are new, not plugged or re-drilled. Has a   5 on 4-3/4" bolt pattern with corresponding 7/16" diameter fine thread   wheel studs.
    • 5 on 4.75" Bolt circle
    • Granada type rotor
    • For use with popular GM Metric calipers and brackets
    • Bearing and seal kit sold separately (910-31052)
  • AFCO 40122PL Front Left 10 Inch Hybrid Brake Rotor Caliper Bracket
    AFCO 40122PL Front Left 10 Inch Hybrid Brake Rotor Caliper Bracket
    x
                

    Use with 1974-1980 Pinto/Mustang II spindle, 10" hybrid rotor and GM 1978-up "Metric" caliper.

    Sides are reversed on '73 & older spindles.

  • AFCO 40122PR Right Front 10 Inch Hybrid Brake Rotor Caliper Bracket
    AFCO 40122PR Right Front 10 Inch Hybrid Brake Rotor Caliper Bracket
    x
                

    Use with 1974-1980 Pinto/Mustang II spindle, 10" hybrid rotor and GM 1978-up "Metric" caliper.

    Sides are reversed on '73 & older spindles.

  • Dual Feed Master Cylinder
    $36.99
    Product Rating: 4.36 Stars
    Dual Feed Master Cylinder
    x
                

    Dual feed master cylinder with 2 bolt flange style mount. Use with Speedway brake pedal assemblies. This cylinder is similar to those used on mid-70's Fords (Mustang, Fairlane/LTD, etc. with disc front/drum rear).

    • Mounting Bolt Holes:  3/8" or 10mm 
    • 7 1/4" long without the pushrod, add 2" for the pushrod
    • 3" wide from the outside of the reservoir to the edge of the outlets
    • Mounting flange is 4" wide
    • Master cylinder is also 3-7/16" tall without a cap
    • Included push rod is threaded 3/8"-24 (fine thread).
    • If you need a yoke for the pedal hook-up, use this Forged Steel Yoke.
    • Push rod boot included.

    Uses 3/8"-24 female inverted flare outlets. If plumbing with AN 3 lines, you will need two each of these AN to IFM Adapters.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. 

  • 1932 Lo-Boy Roadster Spindle Kit
    1932 Lo-Boy Roadster Spindle Kit
    x
                

    This kit mounts 1949-1954 Chevy spindles and Pinto/Mustang II disc brakes to your '32 Lo-Boy front axle.  Spindles are machined for Pinto/Mustang II 9-1/4" rotors. Kit includes spindles, kingpins, caliper brackets & hardware. 

    Kit includes:

    • (2) 49-54 Chevy spindles
    • (1) kingpin set
    • (1) Pinto rotor to Chevy spindle brake adapter kit
    • (2) Set screws, 1/4" UNC
    • (1) Spindle nut set

     

  • Track-T Chevy Spindle & Brake Bracket Kits
    Track-T Chevy Spindle & Brake Bracket Kits
    x
                

    This kit mounts 1949-1954 Chevy spindles and Pinto/Mustang II disc brakes to your Track-T front axle.  Spindles are machined for Pinto/Mustang II 9-1/4" rotors.

    Kit includes:

    • (2) 49-54 Chevy spindles
    • (1) kingpin set
    • (1) Pinto rotor to Chevy spindle brake adapter kit
    • (2) Set screws, 1/4" UNC
    • (1) Spindle nut set
  • Speedway Granada 10-1/2 Inch Brake Caliper Bracket, LH
    Speedway Granada 10-1/2 Inch Brake Caliper Bracket, LH
    x
                

    These brackets are used to mount a GM "metric" calipers to 1974-1980 Pinto/Mustang II spindles for use with what is basically a "Granada" 10-1/2" brake rotor. Steel, bolt-on design mounts the caliper on the rear side of the left front wheel.

  • Speedway Granada 10-1/2 Inch Brake Caliper Bracket, RH
    Speedway Granada 10-1/2 Inch Brake Caliper Bracket, RH
    x
                

    These brackets are used to mount a GM "metric" calipers to 1974-1980 Pinto/Mustang II spindles for use with what is basically a "Granada" 10-1/2" brake rotor. Steel, bolt-on design mounts the caliper on the rear side of the right front wheel.

  • Speedway 1949-1954 Chevy Car Modified Spindles w/ King Pins
    Speedway 1949-1954 Chevy Car Modified Spindles w/ King Pins
    x
                

    Speedway has produced these new forged steel reproduction car spindles. They have many features not available with GMs' original design! These spindles are the choice of professional builders because of their clean look, strength and ease of installation.

    • Made to direct mount Mustang II hubs and rotors plus many other later GM's
    • Kingpin geometry changed to work with current radial tire construction
    • Includes many features not found on GM's original design
    • Forged steel (not cast) reproduction spindles
    • Kit includes pair of new spindles with new kingpins fit to spindle
    • Spindle nuts NOT included (sold separately)

    Spindle Identification Guide (GIF)

  • Speedway 1949-54 Chevy Car Modified Spindles Only
    Speedway 1949-54 Chevy Car Modified Spindles Only
    x
                

    Speedway has produced these new forged steel reproduction car spindles. They have many features not available with GMs' original design! These spindles are the choice of professional builders because of their clean look, strength and ease of installation.

    • Made to direct mount Mustang II hubs and rotors plus many other later GM's
    • Kingpin geometry changed to work with current radial tire construction
    Spindles also available in kit form with kingpins. Save when you purchase a complete kit!

    Spindle Identification Guide (GIF)

  • Speedway 1949-54 Chevy Car Modified Spindles w/ Deluxe King Pins
    Speedway 1949-54 Chevy Car Modified Spindles w/ Deluxe King Pins
    x
                

    Speedway has produced these new forged steel reproduction car spindles. They have many features not available with GMs' original design! These spindles are the choice of professional builders because of their clean look, strength and ease of installation.

    • Made to direct mount Mustang II hubs and rotors plus many other later GM's
    • Kingpin geometry changed to work with current radial tire construction
    • Deluxe kingpins feature modern needle bearing inserts that replace the standard brass bushings
    • Deluxe kingpins are ideal for use on heavier street rods that require superior strength, better lubrication and easier steering
    • Spindle nuts NOT included (sold separately)

    Spindle Identification Guide (GIF)

  • AFCO 10 Inch Hybrid Brake Rotor Conversion Kit
    AFCO 10 Inch Hybrid Brake Rotor Conversion Kit
    x
                

    AFCO 10" hybrid front brake rotor conversion for Pinto/Mustang II spindles. For anyone wanting to switch over to the lighter Pinto spindle and Hybrid rotor set-up. Rotors have 5 x 5" bolt pattern.  This kit is not to be used for asphalt, pavement, or drag racing applications.

    Includes:

    • 5 on 5" IMCA approved AFCO hybrid 10" brake rotors
    • AFCO GM Metric caliper brackets and hardware
    • Bearing and seal kit
    • Dust caps and spindle nut kit
    This brake kit is designed for dirt circle track applications only.
  • Garage Sale - Mustang II Disc Brake Rotor, 5 on 4-3/4 Inch
    Garage Sale
    Garage Sale - Mustang II Disc Brake Rotor, 5 on 4-3/4 Inch
    x
                

    This is garage sale priced because it is older stock.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

    Vented stock 9-1/4" diameter brake rotors for 1974-1980 Mustang II, Pinto, or Bobcat spindles (or Speedway brake kits using '49-'54 Chevy spindles). Brake rotors are new, not plugged or re-drilled. Has a 5 on 4-3/4" bolt pattern with corresponding 7/16" diameter fine thread wheel studs.

    Be sure to install new bearings and seals (910-31000) with your new disc brake rotors. 

  • Garage Sale - Basic Kit 1974-80 Mustang II Brakes to 1949-54 Chevy Spindles, Plain Steel
    Garage Sale
    Garage Sale - Basic Kit 1974-80 Mustang II Brakes to 1949-54 Chevy Spindles, Plain Steel
    x
                

    Our basic front disc brake conversion kit is engineered to mount 1974-80 Pinto, Bobcat, and Mustang II 9-1/4" disc brakes onto 1949-54 Chevy passenger car spindles (some machining of spindles is necessary). Mounts the caliper behind the axle and allows a minimum 13" wheel diameter.

    • Caliper brackets
    • Bearings & seals
    • All hardware

    916-31905 Instructions (PDF)

     

    This is garage sale priced because it is missing the spacers.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - AFCO Right Front 10 Inch Hybrid Brake Rotor Caliper Bracket
    Garage Sale
    Garage Sale - AFCO Right Front 10 Inch Hybrid Brake Rotor Caliper Bracket
    x
                

    Use with 1974-1980 Pinto/Mustang II spindle, 10" hybrid rotor and GM 1978-up "Metric" caliper.

    Sides are reversed on '73 & older spindles.

     

     This brake bracket is garage sale priced because it has been bolted on.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - AFCO Front Left 10 Inch Hybrid Brake Rotor Caliper Bracket
    Garage Sale
    Garage Sale - AFCO Front Left 10 Inch Hybrid Brake Rotor Caliper Bracket
    x
                

    Use with 1974-1980 Pinto/Mustang II spindle, 10" hybrid rotor and GM 1978-up "Metric" caliper.

    Sides are reversed on '73 & older spindles.

     

    This bracket is garage sale priced because it has been bolted on and returned. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

Goto Previous PagePrevious Page
1 2