Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Brand Banners -  MSD
Searched For:

"msd ignition module coil" Page 1 of 1

  • MSD 8394 Chevy Digital E-Curve Distributor
    MSD 8394 Chevy Digital E-Curve Distributor
    x
                Please view the product's page for more information
            
  • MSD 6462 6BTM CDI Ignition Control Unit
    MSD 6462 6BTM CDI Ignition Control Unit
    x
                Please view the product's page for more information
            
  • PerTronix 1181 Ignitor Points Eliminator Kit, 1957-74 GM V8
    PerTronix 1181 Ignitor Points Eliminator Kit, 1957-74 GM V8
    x
                

    Never change points again with the PerTronix Ignitor points conversion kit. It provides increased voltage for improved performance and fuel efficiency. The system completely eliminates the contact points and fits neatly underneath the distributor cap for a "stock" look. Compatible with all 12 volt negative ground systems.

    PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

    • Delivers 2x the voltage to the plugs for more power and MPG
    • 2:1 improvement over points in current fall time, increasing coil output
    • Hall Effect Trigger with no moving parts
    • Epoxy molding makes module impervious to contamination
    • Fits entirely inside distributor for a clean, stock look
    • Stable timing - no adjustment needed
    • Will trigger most multi-spark CD ignitions
    • Easy installation

    Ignitor Points Eliminator Installation Instructions (PDF)

  • MSD 6430 Extreme Duty 6ALN CDI Ignition Control
    MSD 6430 Extreme Duty 6ALN CDI Ignition Control
    x
                

    Orignally designed with NASCAR in mind, the 6ALN cd ingnition control box is equipped with the mandatory 6-Pin Weathertight connector to meet NASCAR's ignition wiring rule, 20-6.1. Plus, a special clear base plate is also installed for easy tech inspection.

    The 6ALN has a built-in Rev Control.  These rev controls are adjustable with plug-in modules and will save your engine from over-rev damage caused by missed shifts or driveline failure.

    547-6430 Instructions (PDF)

    547-6430 Supplement (PDF)

     

  • MSD 5520 Street Fire CDI Ignition
    MSD 5520 Street Fire CDI Ignition
    x
                
    This CD Ignition features multiple sparks to improve starting and idle while also having full power output at high rpm. Also has standard MSD type hook ups and is compatible with MSD's coils and distributors.
    • Perfect for budget minded enthusiasts
    • Capacitive Discharge Technology
    • Multiple sparks improve starting and idle
    • Full power output at high rpm
    • Easily connects to points, amplifiers and magnetic pickup distributors
    • Adjustable rev limiter for overrev protection
    • Has the standard MSD type hook-ups and is compatible with MSD's coils and distributors

    547-5520 Instructions (Part A)

    547-5520 Instructions (Part B)

  • MSD 8360 Chevy V8 with Internal Module Distributor
    MSD 8360 Chevy V8 with Internal Module Distributor
    x
                Please view the product's page for more information
            
  • PerTronix 1281 Ignitor Points Eliminator Kit, 1957-74 Ford V8
    PerTronix 1281 Ignitor Points Eliminator Kit, 1957-74 Ford V8
    x
                

    Never change points again with the PerTronix Ignitor points conversion kit. It provides increased voltage for improved performance and fuel efficiency. The system completely eliminates the contact points and fits neatly underneath the distributor cap for a "stock" look. Compatible with all 12 volt negative ground systems.

    PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

    • Delivers 2x the voltage to the plugs for more power and MPG
    • 2:1 improvement over points in current fall time, increasing coil output
    • Hall Effect Trigger with no moving parts
    • Epoxy molding makes module impervious to contamination
    • Fits entirely inside distributor for a clean, stock look
    • Stable timing - no adjustment needed
    • Will trigger most multi-spark CD ignitions
    • Easy installation

    447-1281 Instructions (PDF)

  • Chevy V8 GM HEI Distributor w/ MSD Module
    Chevy V8 GM HEI Distributor w/ MSD Module
    x
                

    If you are racing on a budget, and you need to replace your worn out HEI distributor, this is your best option! These NEW distributors feature with steel gear and mechanical advance for longer starter and flywheel life. Includes cap and rotor with brass terminals, vacuum advance lock plate to eliminate the vacuum module, and an MSD module good to 9000+ RPM. Module features a built-in externally adjustable rev limiter.

    Works with cap mounted coil (sold separately) or convert to external coil and ignition box. We have experienced better reliability using an EXTERNAL coil that will withstand the heat & vibration of racing. Includes instructions to simplify installation & eliminate confusion.

    910-12341 Instructions (PDF)

  • MSD 8225 HEI High Performance Direct Replacement Coil
    MSD 8225 HEI High Performance Direct Replacement Coil
    x
                

    HEI owners now have a choice to replace their stock coil with the MSD High Energy Unitized Coil for GM HEI Distributors. This coil is a direct re­placement of the stock coil. The coil features special low induc­tance, high temperature windings which charge faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.

    • Direct performance replacement for GM HEI coil-in-cap distributors
    • 70:1 turns ratio and lower primary resistance produce high voltage output
    • Full power sparks to 9,000 RPM when used with 8364 MSD HEI Module
    • Recommended for use with MSD HEI Module PN 8364
  • MSD 8365 Pro-Billet Chevy HEI Distributor
    $369.99
    $388.99
    Product Rating: 4.00 Stars
    MSD 8365 Pro-Billet Chevy HEI Distributor
    x
                Please view the product's page for more information
            
  • PerTronix 1168LS Ignitor Points Eliminator Kit, 1939-62 GM 6 Cyl.
    PerTronix 1168LS Ignitor Points Eliminator Kit, 1939-62 GM 6 Cyl.
    x
                

    Never change points again with the PerTronix Ignitor points conversion kit. It provides increased voltage for improved performance and fuel efficiency. The system completely eliminates the contact points and fits neatly underneath the distributor cap for a "stock" look. Compatible with all 12 volt negative ground systems.

    PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

    • Delivers 2x the voltage to the plugs for more power and MPG
    • 2:1 improvement over points in current fall time, increasing coil output
    • Hall Effect Trigger with no moving parts
    • Epoxy molding makes module impervious to contamination
    • Fits entirely inside distributor for a clean, stock look
    • Stable timing - no adjustment needed
    • Will trigger most multi-spark CD ignitions
    • Easy installation

    447-1168 Instructions (PDF)

  • PerTronix ML-181 Ignitor Kit-Mallory 8 Cylinder Dual Point Distributor
    PerTronix ML-181 Ignitor Kit-Mallory 8 Cylinder Dual Point Distributor
    x
                

    Never change points again with the PerTronix Ignitor System. Kit completely replaces points ignition providing increased voltage for improved performance and fuel efficiency over your old Mallory Dual Point ignition. The system fits neatly underneath the distributor cap and is compatible with all 12 volt negative ground systems.

    PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

    • Delivers 2x the voltage to the plugs for more power and MPG
    • 2:1 improvement over points in current fall time, increasing coil output
    • Hall Effect Trigger with no moving parts
    • Epoxy molding makes module impervious to contamination
    • Fits entirely inside distributor for a clean, stock look
    • Stable timing - no adjustment needed
    • Will trigger most multi-spark CD ignitions
    • Easy installation

    447-181 Instructions (PDF)

  • PerTronix ML-141 Ignitor Kit-Mallory 4 Cylinder Dual Point Distributor
    PerTronix ML-141 Ignitor Kit-Mallory 4 Cylinder Dual Point Distributor
    x
                

    Never change points again with the PerTronix Ignitor System. Kit completely replaces points ignition providing increased voltage for improved performance and fuel efficiency over your old Mallory Dual Point ignition. The system fits neatly underneath the distributor cap and is compatible with all 12 volt negative ground systems.

    PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

    • Delivers 2x the voltage to the plugs for more power and MPG
    • 2:1 improvement over points in current fall time, increasing coil output
    • Hall Effect Trigger with no moving parts
    • Epoxy molding makes module impervious to contamination
    • Fits entirely inside distributor for a clean, stock look
    • Stable timing - no adjustment needed
    • Will trigger most multi-spark CD ignitions
    • Easy installation

    447-141 Instructions (PDF)

  • PerTronix ML-161 Ignitor Kit-Mallory 6 Cylinder Dual Point Distributor
    PerTronix ML-161 Ignitor Kit-Mallory 6 Cylinder Dual Point Distributor
    x
                

    Never change points again with the PerTronix Ignitor System. Kit completely replaces points ignition providing increased voltage for improved performance and fuel efficiency over your old Mallory Dual Point ignition. The system fits neatly underneath the distributor cap and is compatible with all 12 volt negative ground systems.

    PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

    • Delivers 2x the voltage to the plugs for more power and MPG
    • 2:1 improvement over points in current fall time, increasing coil output
    • Hall Effect Trigger with no moving parts
    • Epoxy molding makes module impervious to contamination
    • Fits entirely inside distributor for a clean, stock look
    • Stable timing - no adjustment needed
    • Will trigger most multi-spark CD ignitions
    • Easy installation

    447-161 Instructions (PDF)

  • PerTronix 1183 Ignitor Points Eliminator Kit, 1931-58 GM 8 Cyl.
    PerTronix 1183 Ignitor Points Eliminator Kit, 1931-58 GM 8 Cyl.
    x
                

    Never change points again with the PerTronix Ignitor points conversion kit. It provides increased voltage for improved performance and fuel efficiency. The system completely eliminates the contact points and fits neatly underneath the distributor cap for a "stock" look. Compatible with all 12 volt negative ground systems.

    PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

    • Delivers 2x the voltage to the plugs for more power and MPG
    • 2:1 improvement over points in current fall time, increasing coil output
    • Hall Effect Trigger with no moving parts
    • Epoxy molding makes module impervious to contamination
    • Fits entirely inside distributor for a clean, stock look
    • Stable timing - no adjustment needed
    • Will trigger most multi-spark CD ignitions
    • Easy installation

    447-1183 Instructions (PDF)

  • PerTronix 1144A Ignitor Points Eliminator Kit, 1962-74 Chevy 4 Cyl.
    PerTronix 1144A Ignitor Points Eliminator Kit, 1962-74 Chevy 4 Cyl.
    x
                

    Never change points again with the PerTronix Ignitor points conversion kit. It provides increased voltage for improved performance and fuel efficiency. The system completely eliminates the contact points and fits neatly underneath the distributor cap for a "stock" look. Compatible with all 12 volt negative ground systems.

    PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

    • Delivers 2x the voltage to the plugs for more power and MPG
    • 2:1 improvement over points in current fall time, increasing coil output
    • Hall Effect Trigger with no moving parts
    • Epoxy molding makes module impervious to contamination
    • Fits entirely inside distributor for a clean, stock look
    • Stable timing - no adjustment needed
    • Will trigger most multi-spark CD ignitions
    • Easy installation

    447-1144 Instructions (PDF)

  • PerTronix 1383 Ignitor Points Eliminator Kit, 1951-58 Mopar V8
    PerTronix 1383 Ignitor Points Eliminator Kit, 1951-58 Mopar V8
    x
                

    Never change points again with the PerTronix Ignitor points conversion kit. It provides increased voltage for improved performance and fuel efficiency. The system completely eliminates the contact points and fits neatly underneath the distributor cap for a "stock" look. Compatible with all 12 volt negative ground systems.

    PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

    • Delivers 2x the voltage to the plugs for more power and MPG
    • 2:1 improvement over points in current fall time, increasing coil output
    • Hall Effect Trigger with no moving parts
    • Epoxy molding makes module impervious to contamination
    • Fits entirely inside distributor for a clean, stock look
    • Stable timing - no adjustment needed
    • Will trigger most multi-spark CD ignitions
    • Easy installation

    447-1383 Instructions (PDF)

  • PerTronix 1361A Ignitor Points Eliminator Kit, 1960-72 Mopar 6 Cyl.
    PerTronix 1361A Ignitor Points Eliminator Kit, 1960-72 Mopar 6 Cyl.
    x
                

    Never change points again with the PerTronix Ignitor points conversion kit. It provides increased voltage for improved performance and fuel efficiency. The system completely eliminates the contact points and fits neatly underneath the distributor cap for a "stock" look. Compatible with all 12 volt negative ground systems.

    PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

    • Delivers 2x the voltage to the plugs for more power and MPG
    • 2:1 improvement over points in current fall time, increasing coil output
    • Hall Effect Trigger with no moving parts
    • Epoxy molding makes module impervious to contamination
    • Fits entirely inside distributor for a clean, stock look
    • Stable timing - no adjustment needed
    • Will trigger most multi-spark CD ignitions
    • Easy installation

    447-1361 Instructions (PDF)

  • PerTronix 1162A Ignitor Points Eliminator Kit, 1963-74 GM 6 Cyl.
    PerTronix 1162A Ignitor Points Eliminator Kit, 1963-74 GM 6 Cyl.
    x
                

    Never change points again with the PerTronix Ignitor points conversion kit. It provides increased voltage for improved performance and fuel efficiency. The system completely eliminates the contact points and fits neatly underneath the distributor cap for a "stock" look. Compatible with all 12 volt negative ground systems.

    PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

    • Delivers 2x the voltage to the plugs for more power and MPG
    • 2:1 improvement over points in current fall time, increasing coil output
    • Hall Effect Trigger with no moving parts
    • Epoxy molding makes module impervious to contamination
    • Fits entirely inside distributor for a clean, stock look
    • Stable timing - no adjustment needed
    • Will trigger most multi-spark CD ignitions
    • Easy installation

    447-1162 Instructions (PDF)

  • PerTronix 1261 Ignitor Points Eliminator Kit, 1949-74 Ford 6 Cylinder
    PerTronix 1261 Ignitor Points Eliminator Kit, 1949-74 Ford 6 Cylinder
    x
                

    Never change points again with the PerTronix Ignitor points conversion kit. It provides increased voltage for improved performance and fuel efficiency. The system completely eliminates the contact points and fits neatly underneath the distributor cap for a "stock" look. Compatible with all 12 volt negative ground systems.

    PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

    • Delivers 2x the voltage to the plugs for more power and MPG
    • 2:1 improvement over points in current fall time, increasing coil output
    • Hall Effect Trigger with no moving parts
    • Epoxy molding makes module impervious to contamination
    • Fits entirely inside distributor for a clean, stock look
    • Stable timing - no adjustment needed
    • Will trigger most multi-spark CD ignitions
    • Easy installation

    447-1261 Instructions (PDF)

  • PerTronix 1381A Ignitor Points Eliminator Kit, 1962-75 Mopar V8
    PerTronix 1381A Ignitor Points Eliminator Kit, 1962-75 Mopar V8
    x
                

    Never change points again with the PerTronix Ignitor points conversion kit. It provides increased voltage for improved performance and fuel efficiency. The system completely eliminates the contact points and fits neatly underneath the distributor cap for a "stock" look. Compatible with all 12 volt negative ground systems.

    PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

    • Delivers 2x the voltage to the plugs for more power and MPG
    • 2:1 improvement over points in current fall time, increasing coil output
    • Hall Effect Trigger with no moving parts
    • Epoxy molding makes module impervious to contamination
    • Fits entirely inside distributor for a clean, stock look
    • Stable timing - no adjustment needed
    • Will trigger most multi-spark CD ignitions
    • Easy installation

    447-1381 Instructions (PDF)

  • PerTronix 1282 Ignitor Points Eliminator Kit, 1954-56 Ford V8
    PerTronix 1282 Ignitor Points Eliminator Kit, 1954-56 Ford V8
    x
                

    Never change points again with the PerTronix Ignitor points conversion kit. It provides increased voltage for improved performance and fuel efficiency. The system completely eliminates the contact points and fits neatly underneath the distributor cap for a "stock" look. Compatible with all 12 volt negative ground systems.

    PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

    • Delivers 2x the voltage to the plugs for more power and MPG
    • 2:1 improvement over points in current fall time, increasing coil output
    • Hall Effect Trigger with no moving parts
    • Epoxy molding makes module impervious to contamination
    • Fits entirely inside distributor for a clean, stock look
    • Stable timing - no adjustment needed
    • Will trigger most multi-spark CD ignitions
    • Easy installation

    447-1283 Instructions (PDF)

  • Edelbrock 7118 Performer RPM LS1 Manifold & Timing Control Module
    Edelbrock 7118 Performer RPM LS1 Manifold & Timing Control Module
    x
                

    Some people would prefer to have a good old 4 barrel carburetor instead of fuel injection. This Edlebrok LS1 4 barrel Intake allows you to do just that and includes the MSD box and harness to run the ignition system.

    This powerful new manifold is designed for the popular Chevrolet LS1 (5.7L) small-block V8 originally used in 1997 and later Corvettes and 1998-02 Camaros and Firebirds. It also fits the Corvette LS6 engine and any other Gen III engine including the LM7 (5.3L), LR4 (4.8L), and LQ4 (6.0L). It allows the use of a carburetor on these originally computer-controlled engines, offering maximum power and a broad torque curve from 1500 to 6500 rpm. This manifold made 410 hp and 418 ft/lbs. of torque in dyno tests. The Performer RPM LS1 includes a wiring harness and unique electronic Timing Control Module made by MSD® which works with OE sensors to fire the coil-on-plug ignition system and offers a choice of six timing curves. A special throttle and trans bracket that works with 700R-4, 200R-4 and Turbo 350 transmissions is included, making the LS1 engine an easy retro-fit into any muscle car, street rod or marine application. 

    325-7118 Instructions (PDF)


  • MSD 8391 Chrysler 331/354 Hemi Ready-to-Run Distributor
    MSD 8391 Chrysler 331/354 Hemi Ready-to-Run Distributor
    x
                

    The Ready-to-Run dis­tributor earns its name with simple wiring. One wire to 12 volts, one to coil negative and another to ground. That’s it! A match­ing harness with a 3-pin Weathertight connector is supplied.  Does not require an MSD Ignition Control.

    • Simple and clean installation with only three wires to connect
    • Powerful built-in module produces a 7.5 amp single spark through high rpm
    • Easy-to-adjust mechanical advance with supplied springs and stop bushings
    • Vacuum advance canister for improved economy (can be locked out)
    • CNC machined billet aluminum housing and billet aluminum base
    • Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range
    • Polished steel shaft is QPQ coated and guided by sealed ball bearings
    • Advance plate and weights are fine blanked from Chromoly steel and QPQ coated for friction reduction
    • Mechanical advance assembly can be locked out for crank trigger systems
    • Advance weight pins are staked and tig welded to the plate
    • Nylon pads ensure smooth operation of the advance weights
    • Supplied with a HEI style distributor cap and rotor (accepts Cap-A-Dapts)
    • CARB E.O. Approved

    547-8391 Instructions (PDF)

  • PerTronix D100701 Chevy Flame-Thrower Distributor
    PerTronix D100701 Chevy Flame-Thrower Distributor
    x
                Please view the product's page for more information
            
  • PerTronix D132701 Flame-Thrower Ford 351C, 429, 460 Distributor
    PerTronix D132701 Flame-Thrower Ford 351C, 429, 460 Distributor
    x
                

    Replace your outdated distributor with this performance proven system. Simply install the distributor in the engine, connect two wires and start it up! Features the reliable and accurate Ignitor II pickup module for maximum performance in a compact package. Compatible with most most CD ignition systems (MSD 6-Series, etc.). Fits Big Bock Ford 351C, 351M, 400, 429, and 460 V8 engines.

    • CNC machined 6061-T6 billet aluminum housings offer maximum strength
    • Housing is hand polished and buffed to a high luster
    • Tempered distributor shaft for accurate timing and extended operational life
    • Upper ball bearing and extra long oil impregnated bronze lower bushing provide high RPM stability
    • Ignitor II module with adaptive dwell maintains peak energy throughout the RPM range
    • Cobalt magnets and Hall Effect trigger for stable timing and precise spark distribution
    • Adjustable mechanical advance with proprietary limiting function permits multiple settings
    • Factory set with a performance advance curve
    • Additional springs for custom advance curves are provided
    • High dielectric strength cap and rotor with brass terminals and contact
    • Cannot be used with solid core (wire core) ignition wires

    447-13271 Instructions (PDF)

    For even more performance, consider adding 

  • PerTronix D131701 Flame-Thrower Ford 351W Billet Distributor
    PerTronix D131701 Flame-Thrower Ford 351W Billet Distributor
    x
                

    Replace your outdated distributor with this performance proven system. Simply install the distributor in the engine, connect two wires and start it up! Features the reliable and accurate Ignitor II pickup module for maximum performance in a compact package. Compatible with most most CD ignition systems (MSD 6-Series, etc.).

    • CNC machined 6061-T6 billet aluminum housings offer maximum strength
    • Housing is hand polished and buffed to a high luster
    • Tempered distributor shaft for accurate timing and extended operational life
    • Upper ball bearing and extra long oil impregnated bronze lower bushing provide high RPM stability
    • Ignitor II module with adaptive dwell maintains peak energy throughout the RPM range
    • Cobalt magnets and Hall Effect trigger for stable timing and precise spark distribution
    • Adjustable mechanical advance with proprietary limiting function permits multiple settings
    • Factory set with a performance advance curve
    • Additional springs for custom advance curves are provided
    • High dielectric strength cap and rotor with brass terminals and contact
    • Cannot be used with solid core (wire core) ignition wires

    447-13711 Instructions (PDF)

    For even more performance, consider adding a Flame-Thrower coil for increased spark energy and higher RPM po

  • PerTronix D130701 Flame-Thrower S/B Ford 289-302 Billet Distributor
    PerTronix D130701 Flame-Thrower S/B Ford 289-302 Billet Distributor
    x
                

    Replace your outdated distributor with this performance proven system. Simply install the distributor in the engine, connect two wires and start it up! Features the reliable and accurate Ignitor II pickup module for maximum performance in a compact package. Compatible with most most CD ignition systems (MSD 6-Series, etc.). Fits Small Bock Ford 221, 260, 289, and 302 V8 (except 5.0L).

    • CNC machined 6061-T6 billet aluminum housings offer maximum strength
    • Housing is hand polished and buffed to a high luster
    • Tempered distributor shaft for accurate timing and extended operational life
    • Upper ball bearing and extra long oil impregnated bronze lower bushing provide high RPM stability
    • Ignitor II module with adaptive dwell maintains peak energy throughout the RPM range
    • Cobalt magnets and Hall Effect trigger for stable timing and precise spark distribution
    • Adjustable mechanical advance with proprietary limiting function permits multiple settings
    • Factory set with a performance advance curve
    • Additional springs for custom advance curves are provided
    • High dielectric strength cap and rotor with brass terminals and contact
    • Cannot be used with solid core (wire core) ignition wires

    447-13701 Instructions (PDF)

    For even more performance, consider adding a F

  • PerTronix D133701 Flame-Thrower FE Ford 352, 390, 428 Distributor
    PerTronix D133701 Flame-Thrower FE Ford 352, 390, 428 Distributor
    x
                

    Replace your outdated distributor with this performance proven system. Simply install the distributor in the engine, connect two wires and start it up! Features the reliable and accurate Ignitor II pickup module for maximum performance in a compact package. Compatible with most most CD ignition systems (MSD 6-Series, etc.). Fits Ford FE 352, 360, 390, 427, and 428 V8 engines.

    • CNC machined 6061-T6 billet aluminum housings offer maximum strength
    • Housing is hand polished and buffed to a high luster
    • Tempered distributor shaft for accurate timing and extended operational life
    • Upper ball bearing and extra long oil impregnated bronze lower bushing provide high RPM stability
    • Ignitor II module with adaptive dwell maintains peak energy throughout the RPM range
    • Cobalt magnets and Hall Effect trigger for stable timing and precise spark distribution
    • Adjustable mechanical advance with proprietary limiting function permits multiple settings
    • Factory set with a performance advance curve
    • Additional springs for custom advance curves are provided
    • High dielectric strength cap and rotor with brass terminals and contact
    • Cannot be used with solid core (wire core) ignition wires

    447-13371 Instructions (PDF)

    For even more performance, consider adding a Flame

  • Garage Sale - Pertronix 1382 Ignitor Kit, 1959-71 Chrysler Big Block With Vacuum Advance
    Garage Sale
    Garage Sale - Pertronix 1382 Ignitor Kit, 1959-71 Chrysler Big Block With Vacuum Advance
    x
                Please view the product's page for more information
            
  • Garage Sale - MSD Pro-Billet Chevy HEI Disributor, Chevy V8
    Garage Sale
    Garage Sale - MSD Pro-Billet Chevy HEI Disributor, Chevy V8
    x
                Please view the product's page for more information