Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"mounting bracket kit" Page 1 of 16

  • Radiator Mounting Hardware
    From: $15.99
    Product Rating: 3.67 Stars
    Radiator Mounting Hardware
    x
                

    Mounting radiators can be a real pain, but these universal radiator mounting brackets will makes it a little easier. Brackets are designed to mount our universal aluminum crossflow radiators with a 3" thick core to a variety of applications. Don't forget to order the rubber insulator pads (sold separately).

    917-34700-STL
    This kit contains 4 steel brackets. The lower brackets measure 3-1/4" inside to inside. The upper brackets measure 2-1/2" inside to inside.

    917-34700-ALU
    This kit contains 4 aluminum brackets. 2 lower mounts brackets and 2 upper mount brackets (for weight savings). The lower brackets measure 3-1/4" inside to inside. The upper bracket measure 2-1/2" inside to inside.

    917-34700-SS
    This kit contains 4 stainless steel pieces. 2 lower mounts brackets and 2 upper mount brackets. The lower brackets measure 3-1/4" inside to inside. The upper bracket measure 2-1/2" inside to inside.

  • Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    x
                Please view the product's page for more information
            
  • IMCA 1978-88 GM Metric Chassis 9 Inch Ford Axle Bracket Kit
    IMCA 1978-88 GM Metric Chassis 9 Inch Ford Axle Bracket Kit
    x
                

    You can weld these brackets to your 9" Ford housing and install it in your 1978-88 GM Metric chassis. Includes upper and lower control arm mounts. Welding required. Designed for 3-1/2" axle tubes, but can be fit to 3" tubes.

  • Small Block Chevy Inboard Drive Kits, Alternator & AC
    Small Block Chevy Inboard Drive Kits, Alternator & AC
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. 

    Inboard (high) mount brackets for early cars.

    Alternator and A/C kits include dual groove pulleys.

    Bracket kit works with dual quad & 3-2 low rise intakes.

    Note: S/B Chevy, short style water pump only.

  • Speedway Tribute T-Bucket 9 Inch Ford Rear End Option
    Speedway Tribute T-Bucket 9 Inch Ford Rear End Option
    x
                Please view the product's page for more information
            
  • U Weld Model A Frame Assembly Kit
    U Weld Model A Frame Assembly Kit
    x
                If you're willing to pick up a welder in order to lower your rodding costs, Speedway Motors has a great new frame option for you.  The all-new Speedway Motors U-Weld-It Model A Frame Kit is the perfect way for do-it-yourself rodders to construct a solid, well-engineered chassis on a budget. This kit features all of the components featured on Speedway Motors' popular Model A Frame in one ready-to-weld package.

    The kit includes:
    • Boxed Model A frame rails with drilled and tapped body mounts
    • Two-inch dropped front crossmember
    • Front hairpin and rear four-bar suspension brackets
    • Front and rear shock mounts
    • S/B Chevy engine mounts
    • Transmission crossmember and mount
    • Rear crossmember kit
    • Rear panhard bar mount
    • Vega steering box mount
    • Master cylinder mount with brake pedal and hardware
    All parts are pre-cut and ready to weld together, making it simple for those with proper welding skills to assemble a strong, top-quality chassis for their street rod project.
  • Kirkey 99200 Seat Mounting Bracket Kit
    Kirkey 99200 Seat Mounting Bracket Kit
    x
                

    From America's leader in seat manufacturing comes this strong, lightweight frame for your seats. Don't compromise your safety with a home-made frame.

    This is a universal seat mount made for installing aluminum bucket seats in IMCA modified race cars. It is made to anchor into the roll cage tubing and requires fabrication to fit each particular application.

    This kit will give you the safest mounting possible and save you hours of work, too. By simply rotating the tubes, you can mount this kit directly to the main hoop and door bars. 

    910-70200 Instructions (PDF)

  • Butlerbuilt BBP-4801 Torque Ball Shield Mount Kit, Sprint Racing
    Butlerbuilt BBP-4801 Torque Ball Shield Mount Kit, Sprint Racing
    x
                These are replacement mounting bracket kits for our torque ball shield (202-4800).  Torque ball shields protect the driver's feet and legs from injury during catastrophic driveline failure.
    • Replacement mounting brackets and bolts
    • Easy installation.....no fabrication required
    • Mounts to bellhousing
    • Easily removed for quick torque tube servicing
  • Small Block Chevy Inboard Drive Kits, Alternator
    Small Block Chevy Inboard Drive Kits, Alternator
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. 

    Inboard (high) mount brackets for early cars.

    Alternator only kits include single groove pulleys.

    Note: S/B Chevy, short style water pump only.

  • Lokar XSRK-4000 Universal Throttle Cable Bracket and Spring Kit
    Lokar XSRK-4000 Universal Throttle Cable Bracket and Spring Kit
    x
                These Lokar stainless throttle cable brackets mount  to the rear of your Holley, Edelbrock, AFB, Quadrajet, or inline dual  carburetors. These brackets are used to mount Lokar's throttle cable and  kickdown assemblies.
    • Mounts to carburetor base
    • Accepts Transmission Kickdown Cable
    • Accepts Throttle Return Spring
    • Return Spring Included
    • Hardware Included
    • Stainless steel bracket
    • Black powdercoated
    • Sold individually
  • Deluxe Coil-Over Rear Suspension Kit, Plain Finish
    Deluxe Coil-Over Rear Suspension Kit, Plain Finish
    x
                

    This rear suspension kit is loaded with high quality components from Speedway and Carrera. Kit includes a steel panhard bar, chrome plated Carrera coil-over shock assemblies, bare steel 32" radius rods, and all mounting brackets and hardware. The Carrera 3-way adjustable, gas pressurized and radial tuned shocks provide an excellent ride. Welding is required for assembly.

    • Kit includes:
      • Steel panhard bar
      • Chrome plated Carrera coil-over shock assemblies
      • Bare steel 32" radius rods
      • All mounting brackets and hardware

    Comes with your choice of spring rate. Use the Spring Rate Guide and Coil-Over Mounting guide to select to proper rate for your vehicle.

    Spring Rate Guide (GIF) 

    Coil-Over Mounting Guide (GIF) 

    916-49060 Instructions (PDF)

  • Unisteer 8000930-01 1962-1967 Chevy II/Nova Manual Rack & Pinion Kit
    Unisteer 8000930-01 1962-1967 Chevy II/Nova Manual Rack & Pinion Kit
    x
                

    These rack & pinion conversion kits will finally give your 62'-67' Chevy II or Nova the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety. The manual rack & pinion has been modified to match the front suspension of the Chevy II/Nova, the resulting rack & pinion is geometrically correct offering no or negligible bump steer.

    Installation is easy, the rack & pinion comes mounted to its custom mounting bracket that bolts up to the existing engine mounts. No welding or cutting involved!

    Kit includes:

    • Manual Rack & Pinion
    • Black Powdercoated Mounting Bracket
    • Steering Arms
    • Tie Rod Ends

     

  • Lokar EC-80FU Floor/Dash Mount Emergency Brake Cables
    Lokar EC-80FU Floor/Dash Mount Emergency Brake Cables
    x
                

    Cables are designed for use with Lokar Floor Mount & Under Dash Mount Emergency Hand Brakes. Kit comes equipped with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Outer housing is designed with specially extruded liner for extended life of the cable. Stainless inner cable resists moisture.

    Design allows rear end backing plate fittings to be removed without removing brake cables. Lokar cables also feature adjustable cable lock and clevis. Kit is complete with cable bracket and spacers. Kit includes two 8 foot black outer housings that “U-Cut-to-Fit".

    See Application tab for model-specific information.

    EC80FU E-Brake Cable Instructions (PDF) 

    Connector Cable Installation Instructions (PDF) 

  • 1978-88 GM Metric Chassis 9 Inch Ford Axle Bracket Kit
    1978-88 GM Metric Chassis 9 Inch Ford Axle Bracket Kit
    x
                

    Weld these brackets to your 9" Ford housing and install it in your 1978-1988 GM Metric chassis. Includes upper and lower control arm mounts, and weld-on caliper brackets for use with Metric calipers. Welding is required. Designed for 3-1/2" axle tubes, but can be fit to 3" tubes. 

    This kit is NOT IMCA Hobby Stock legal but is IMCA Stock Car approved. 

  • Billet FM2222PC B/B Chevy Mid Mount Serpentine Conversion Kit Press-On
    Billet FM2222PC B/B Chevy Mid Mount Serpentine Conversion Kit Press-On
    x
                Please view the product's page for more information
            
  • Billet FM2221PC BBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    Billet FM2221PC BBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    x
                Please view the product's page for more information
            
  • 1932 Ford Lo-Boy Rear End Mounting Kit
    1932 Ford Lo-Boy Rear End Mounting Kit
    x
                

    This kit links your rear axle to the '32 Lo-Boy frame mounts using quarter elliptic springs, upper radius rods & a Panhard bar. Quarter elliptic springs not included in kit (sold separately). Builder can cut their own springs from a pair of factory leaves as well. For maximum performance, use Composite Quarter Elliptic Mono-Leaf Springs 974-49934.

    See Notes tab for complete kit list. 

  • Speedway Throttle and Kickdown Cable Bracket Kit
    Speedway Throttle and Kickdown Cable Bracket Kit
    x
                Chrome plated, fully adjustable throttle cable and automatic transmission kickdown cable bracket bolts to the corner of most 2bbl. or 4 bbl. carburetors. Steel bracket locks in place and won't swivel. Works with OEM cable housings that have square plastic ends which snap into the bracket holes.
            
  • Billet FM2122PC S/B Chevy Mid Mount Serpentine Conversion Kit-Press-On
    Billet FM2122PC S/B Chevy Mid Mount Serpentine Conversion Kit-Press-On
    x
                Please view the product's page for more information
            
  • Speedway 1927 Track-T Roadster Kit
    Speedway 1927 Track-T Roadster Kit
    x
                

    With their exciting, racy styling, Track T roadsters are some of the most recognizeable hot rods in American automotive history. Designed for nostalgic originality, Speedway’s Track-T Roadster is an economical way to relive that vintage motoring spirit. This kit car turns heads wherever it goes with its beautiful, one-piece 1927 T body, smooth lines and custom track style nose.  The Track-T is designed to use the powertrain from 4-cylinder or V6 powered rear wheel drive vehicles.  In such a small, lightweight car they become mighty spirited performers.

    The 1927 Track-T basic kit includes a 1927 Model T Roadster body with right and left full length side frame covers and custom floor with transmission tunnel.  It also comes with a passenger compartment rear bulkhead divider, street rodder nose, rear roll pan, smooth flat cowl/firewall and front shock mounts.  Headlight mounts, hood top, and aluminum hood sides are also included. The storage compartment behind the seat is even large enough to accept 2-3 suitcases, or a large cooler & picnic basket. 

    The rigid tube steel chassis features front & rear kick-ups for a lower ride height and includes pre-mounted suspension bracketry. The chassis is built to accomodate a traditional spring-over, tube axle front suspension with Hairpin radius rods, Vega cross steering, and '49-'54 Chevy spindles. Rear suspension mounts will

  • Speedway Beehive Oil Filter
    $199.99
    Speedway Beehive Oil Filter
    x
                

    This 1950's style beehive oil filter housing has finned aluminum construction which dissipates heat and looks trick! Easily disassembles for cleaning or inspection. Adapts easily to most engines with canister type filters.

    Beehive mounting brackets are sold separately.

    NOTE: Lid gasket 910-15191G is suggested when purchasing a replacement canister filter element 910-51006.

  • Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Plain Steel
    Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Plain Steel
    x
                

    Features heavy wall 21-1/2" rods with plain steel brackets. Exclusive sandwich-style brackets give greater bar support and incorporate a multi-position lower coil-over mount. 

    Complete kit includes: mild steel rods, steel brackets, bushed rod ends, and hardware. Lower coil-over shock mount stud not included. The nuts & bolts supplied in this kit are NOT polished or plated.

    • Rod length is 21-1/2"
    • Center-to-center of 4-bar eyelets is 5.5"
    • Bracket width is 1.39"

    This kit comes in two varieties:

    • TA - to fit narrow frames such as Model T or Model A
    • 3234 - to fit wider frames such as 1932-1934 Ford

    Note:  Four bar rear suspension kits require the use of a side to side control such as a panhard bar or a watts link component.

    916-49055 Instructions (PDF)

  • Lokar KD-2400HT TH400 Hi-Tech Electric Kickdown Kit
    Lokar KD-2400HT TH400 Hi-Tech Electric Kickdown Kit
    x
                

    Lokar's Hi-Tech TH400 Electric Kickdown is cable-operated. Electric switch is housed in a billet aluminum box that mounts with transmission pan bolts.* Kit includes "U-Cut-to-Fit" outer housing in stainless steel. This Turbo 400 kickdown is designed with a specially extruded liner for extended life of the cable, aluminum fittings and stainless steel inner wire and stainless mounting bracket. This design eliminates mounting unsightly electrical switches on carburetor, manifold, or near throttle pedal. Complete installation instructions included in kit.

    Can be mounted in a variety of locations within 48" of carburetor.

  • Track-T Rear Axle Mounting Kit
    $199.99
    Track-T Rear Axle Mounting Kit
    x
                

    This kit links your rear axle to the Track-T frame mounts using quarter elliptic springs, upper radius rods & a Panhard bar. Quarter elliptic springs not included in kit (sold separately). Builder can cut their own springs from a pair of factory leaves as well. For maximum performance, use Composite Quarter Elliptic Mono-Leaf Springs 974-49934 (sold separately).

    Kit includes: 

    • Large Panhard bar/right shock mounting bracket
    • Left shock mounting bracket
    • (2) Radius rod mouting brackets
    • (4) Spring mounting brackets
    • Spring clamp plates
    • (2) Rear radius rods, 21" (cut length)
    • Panhard bar, 22.5" (cut length)
    • (3) Spherical rod ends, 5/8" right side standard male
    • (3) Jam nuts, 5/8" right side
    • (3) Spherica rod ends, 5/8" left side standard male
    • (3) Jam nuts, 5/8" left side
    • (2) Bolts, 5/8" UNF x 5"
    • (4) Bolts, 5/8" UNF x 2"
    • (6) Lock nuts, 5/8" UNF
  • Deluxe 1978-88 Metric Chassis 9 Inch Ford Axle Bracket Kit
    Deluxe 1978-88 Metric Chassis 9 Inch Ford Axle Bracket Kit
    x
                

    You can weld these brackets to your 9" Ford housing and install it in your GM Metric chassis. Includes upper and lower control arm mounts. Welding required. Designed for 3-1/2" axle tubes, but can be fit to 3" tubes.

    This Deluxe rear end bracket set features multiple holes (5) for mounting the lower control arms. Also included is a pair of weld-on brackets for mounting the Metric brake calipers. The lower mounts in this kit have only one shock mount position. 

    This kit is NOT IMCA Hobby Stock legal but is IMCA Stock Car approved. 

  • Stud Kit for Flathead Head Mount Generator Brackets
    Stud Kit for Flathead Head Mount Generator Brackets
    x
                
    • Required for Offenhauser brackets 560-1093 and 560-1094 
    • (3) ea 7/16"-14 x 4-1/2" USS Grade 8 all thread
    • (3) ea 7/16"-14 USS Coarse Grade 8 nut
    • (3) ea washer
  • TCI 1935-40 Ford Car, 1935-41 Ford 1/2 Ton Pickup Rear Leaf Spring Kit
    TCI 1935-40 Ford Car, 1935-41 Ford 1/2 Ton Pickup Rear Leaf Spring Kit
    x
                

    Improving the ride and handling of your fat fendered Ford doesn’t have to be difficult – or expenisive. These rear parallel leaf spring kits offer a vastly improved ride compared to your Fords original transverse-leaf suspension, and provide a great way to install an updated rear axle assembly. 

    • High-quality multi-leaf springs with bolt in mounting brackets
    • Modern tube shocks that offer the stability you need in a street rod
    • Kits include springs, bolt-on mounting brackets, weld-on axle brackets, shock kit, hardware and instructions.

    910-40435 Instructions (PDF)

  • Vega Box Mount and Front Radius Rod Brackets for Bare Model T Frames
    Vega Box Mount and Front Radius Rod Brackets for Bare Model T Frames
    x
                

    When ordered with one of our Bare Model T frames (Budget, Nostalgia/Deluxe, or Dexlue '27), these items will be installed onto the frame you choose. Simply choose your frame and add any of these add-on items to your shopping cart, and we'll take care of the rest! 

    Note:  This add-on option is to be utilized in conjunction with a spring behind axle configuration similar to the spring behind axle kits used with our T frame chassis kits.    This is not applicable to a spring over configuration.

    This product requires a 3-4 week build time.
  • Vega Box Mount and Front Four-Bar Brackets for Bare Model T Frames
    Vega Box Mount and Front Four-Bar Brackets for Bare Model T Frames
    x
                

    When ordered with one of our Bare Model T frames (Budget, Nostalgia/Deluxe, or Dexlue '27), these items will be installed onto the frame you choose. Simply choose your frame and add any of these add-on items to your shopping cart, and we'll take care of the rest! 

    Note:  This add-on option is to be utilized in conjunction with a spring behind axle configuration similar to the spring behind axle kits used with our T frame chassis kits.  This is not applicable to a spring over configuration.

    This product requires a 3-4 week build time.
  • 1932 Lo-Boy Roadster Frame Assembly
    1932 Lo-Boy Roadster Frame Assembly
    x
                Please view the product's page for more information
            
  • Tribute T Headlight Bracket Mount Kit
    Tribute T Headlight Bracket Mount Kit
    x
                These headlight mount kits are designed for use with our Tribute T kit cars but will also work as a universal kit for a variety of other applications.  They accept Dietz style headlights.
    • 5/16" mounting holes 2" center to center
    • 1/2" ID sleeve for light mounting bolt
    • Great for headlights and taillights
    • Accepts Dietz style headlights
    • Kit includes:
      • (2) mounting cups
      • (2) rubber mount pads
      • (4) mounting bolts
  • Weld-On Universal Shock-Headlight Mounts
    Weld-On Universal Shock-Headlight Mounts
    x
                

    These are the headlight and shock mounts we designed  for our T-buckets. They were designed to be welded to the outside edge of the frame rail with the shock mounting on outside (front) of the bracket.

    • Mounts have 1/2" holes for Dietz style or other headlights
    • Each mount has two different 1/2" hole locations for upper shock mounting
    • Weld-on to frame rail
    • Shock bolts to outside, front of mount

    Be sure to purchase our shock mount bolts (sold separately) with installation of these brackets.

    Note:  This set of brackets is intended to be used with "radius-rod" (not 4-bar) style T-frames.

  • AFCO 80197 Universal Electric Fan Mounting Kit
    AFCO 80197 Universal Electric Fan Mounting Kit
    x
                

    This neat kit allows you to mount an electric fan to your street rod radiator. Works great with AFCO electric fans.

    The max mounting distance on the plates of this kit is 17".

    Instructions (PDF) 

  • 1932 Lo-Boy Small Block Chevy Engine Mount Option
    1932 Lo-Boy Small Block Chevy Engine Mount Option
    x
                

    Stuff a S/B Chevy into your '32 Lo-Boy and you'll have one wild ride! For even more performance and a more compact installation, use our LS-series engine adapter brackets (916-18016) to mount Chevy's late model all-aluminum V-8.

    Kit includes (2) frame adapter brackets & (1) fiberglass firewall distributor recess bulge.

  • Radiator Rubber Pads
    $4.99
    Radiator Rubber Pads
    x
                This set of radiator pads consists of two pieces of 1/4" thick rubber. One set provides enough rubber for all four brackets in our radiator mount bracket kit 91734700-STL.
            
  • Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    x
                

    These kits allow you to mount front disc brakes on your 1955-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series). Front disc brakes provide a significant improvement in braking performance versus the drum brakes your old Chevy came with. This disc brake kit works with stock, drum brake spindles only - it does not work with 2" drop spindles. Kit will work with 14" wheels intended for disc brake applications, as well as most 15" (or larger) wheels.

    Rotors are 11" diameter with 5 on 4-3/4" bolt pattern and calipers have 7/16"-20 inlets. This kit will increase track width 7/8" per side or 1-3/4" total when installed. 

    • 11" Rotors
    • 5 on 4-3/4" - bolt pattern
    • Metric calipers
    • Calipers mount behind axle (rearward)
    • Will work with 14" & larger wheels intended for use with disc brakes
    • Bearings, pads, brackets included
    • Seals and hoses
    • Hardware included
    • Increases trac-width 7/8" per side
    • For '55-'64 Chevy fullsize cars. 

    910-31911 Instructions (PDF)

     

Goto Previous PagePrevious Page
1 2 3 4 5 ... 16