Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"model t cap" Page 1 of 5

  • Model T Glass Cap, Stainless Steel
    Model T Glass Cap, Stainless Steel
    x
                

    Stock style glass caps fit all Model T windshields.

    Sold each.

    Model T Glass Cap Illustration (GIF)

  • Model T Dog Bone Radiator Cap, Chrome, Drilled
    Model T Dog Bone Radiator Cap, Chrome, Drilled
    x
                These Dog Bone caps are a reproduction of an original aftermarket  accessory that were available during the Model T era. These cast chrome  caps have a hole drilled in them for use with Jr. Moto-Meters and are 6-1/2”  long. The Dog bone style makes removing your radiator cap easier by  giving you a more convenient area to grip and to twist turn the hot cap,  as the  arms are outboard and they cool off in the air. Many people  like using it to add some style to your Model T.

    Model T Dog Bone Radiator Cap

    • Fits 1909-1927 Ford Model T radiators
    • Screws into stock filler necks
    • 6-1/2" long (end to end)
    • Drilled for Motor Meters
    • Chrome finish

    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles

  • Model T Dog Bone Radiator Cap, Chrome, Undrilled
    Model T Dog Bone Radiator Cap, Chrome, Undrilled
    x
                

    These Dog Bone caps are a reproduction of an original aftermarket accessory that were available during the Model T era. These cast chrome caps  are 6-1/2” long. The Dog bone style makes removing your radiator cap easier by giving you a more convenient area to grip and to twist turn the hot cap, as the arms are outboard and they cool off in the air. Many people like using it to add some style to your Model T.

    Model T Dog Bone Radiator Cap

    • Fits 1909-1927 Ford Model T radiators
    • Screws into stock filler necks
    • 6-1/2" long (end to end)
    • Undrilled
    • Chrome finish
  • Model T Dog Bone Radiator Cap, Brass, Drilled
    Model T Dog Bone Radiator Cap, Brass, Drilled
    x
                

    These Dog Bone caps are a reproduction of an original aftermarket accessory that were available during the Model T era. These cast brass caps have a hole drilled in them for use with Jr. Moto-Meters and are 6-1/2” long. The Dog bone style makes removing your radiator cap easier by giving you a more convenient area to grip and to twist turn the hot cap, as the arms are outboard and they cool off in the air. Many people like using it to add some style to your Model T.

    Model T Dog Bone Radiator Cap

    • Fits 1909-1927 Ford Model T radiators
    • Screws into stock filler necks
    • 6-1/2" long (end to end)
    • Drilled for Motor Meters
    • Brass finish
  • Model T Dog Bone Radiator Cap, Brass, Undrilled
    Model T Dog Bone Radiator Cap, Brass, Undrilled
    x
                

    These Dog Bone caps are a reproduction of an original aftermarket accessory that were available during the Model T era. These cast brass caps are 6-1/2” long. The Dog bone style makes removing your radiator cap easier by giving you a more convenient area to grip and to twist turn the hot cap, as the arms are outboard and they cool off in the air. Many people like using it to add some style to your Model T.

    Model T Dog Bone Radiator Cap

    • Fits 1909-1927 Ford Model T radiators
    • Screws into stock filler necks
    • 6-1/2" long (end to end)
    • Undrilled
    • Brass finish
  • Model T Glass Cap, Brass
    $3.99
    Model T Glass Cap, Brass
    x
                

    Stock style glass caps fit all Model T windshields.

    Sold each.

    Model T Glass Cap Illustration (GIF)

  • Model T Glass Cap, Plain Steel
    Model T Glass Cap, Plain Steel
    x
                

    Stock style glass caps fit all Model T windshields.

    Sold each.

    Model T Glass Cap Illustration (GIF)

  • Model T Glass Cap, Chrome
    $3.99
    Model T Glass Cap, Chrome
    x
                

    Stock style glass caps fit all Model T windshields.

    Sold each.

    Model T Glass Cap Illustration (GIF)

  • Model T Gull Wing Cap, Brass, Undrilled
    Model T Gull Wing Cap, Brass, Undrilled
    x
                

    Graceful, swept-back wing shape adds class and style to any Model T. Screws onto radiator filler neck.*

    *NOTE: Cap does not fit our Model T filler neck 91112221 or 91112220.

    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles.  

  • Model T Gull Wing Cap, Brass, Drilled
    Model T Gull Wing Cap, Brass, Drilled
    x
                

    Graceful, swept-back wing shape adds class and style to any Model T. Screws into filler neck.* Accepts motor meter.

    *NOTE: Cap does not fit our Model T filler neck 91112221 or 91112220.

    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles.  

  • Model T Gull Wing Cap, Chrome, Undrilled
    Model T Gull Wing Cap, Chrome, Undrilled
    x
                

    Graceful, swept-back wing shape adds class and style to any Model T. Screws onto filler neck.*

    *NOTE: Cap does not fit our Model T filler neck 91112221 or 91112220.

    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles.  

  • Model T Motor Meter, Smooth, Chrome
    Model T Motor Meter, Smooth, Chrome
    x
                These moto meters attach through our "drilled" hex caps, dog bone caps, or winged radiator caps. 
    • Authentic reproduction of the popular Model T accessory
    • Smooth chrome finish
    • Includes neoprene gasket and securing nut
    • Overall height 4-1/4", meter diameter 2-3/8"
  • Aluminum Windshield Slug for Model T, 3-1/2 Inch Long, 2 Hole
    Aluminum Windshield Slug for Model T, 3-1/2 Inch Long, 2 Hole
    x
                

    Aluminum windshield slug material designed for Speedway's round tube "T" style windshields.  This slips inside the tubing to allow you to attach hinges, glass clips and the frame to the posts.  3.5" long, 2 holes drilled and tapped for hinges and glass caps.

    • Aluminum construction
    • Fits Speedway round tube "T" style windshields
    • 3.5" long
    • 2 holes drilled and tapped for hinges and glass caps
  • Model T Filler Neck, Chrome
    $39.99
    Model T Filler Neck, Chrome
    x
                

    1917-1927 Model T style radiator filler neck designed for use with hex radiator caps or dog bone radiator caps. Solder it onto your radiator or secure it with a long bolt through the center of the grille shell.

    • Base is 2.935"
    • Height is 2.5"

    NOTE: Gull wing caps (91112206, 91112207, 91112208, and 91112209) do not fit these Model T Filler Necks.

  • Model T Gull Wing Cap, Chrome, Drilled
    Model T Gull Wing Cap, Chrome, Drilled
    x
                

    Graceful, swept-back wing shape adds class and style to any Model T. Screws onto filler neck.* Accepts motor meters.

    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles.  

  • Model T Hex Radiator Cap, Chrome, Drilled
    Model T Hex Radiator Cap, Chrome, Drilled
    x
                

    Screws into the top of stock Model T filler necks or our repros. Drilled style accepts motor meters. Chrome.

    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles.  

  • Model T Filler Neck, Brass
    $29.99
    Model T Filler Neck, Brass
    x
                

    1906-1916 Model T style radiator filler neck designed for use with hex radiator caps or dog bone radiator caps. Solder it onto your radiator or secure it with a long bolt through the center of the grille shell.

    • Base is 2.935" O.D.
    • Top is 2-1/8" O.D.
    • Height is 2-1/2"

    NOTE: Gull wing caps (91112206, 91112207, 91112208, and 91112209) do not fit these Model T Filler Necks.

  • Model T Brass Radiator Cap
    $14.99
    Product Rating: 5.00 Stars
    Model T Brass Radiator Cap
    x
                Same as stock 1909-1915 Model T. Has four fins or "ears". Screws into all stock Model T filler necks. Brass only.
            
  • Model T Motor Meter, Smooth, Brass
    Model T Motor Meter, Smooth, Brass
    x
                These moto meters attach through our "drilled" hex caps, dog bone caps, or winged radiator caps. 
    • Authentic reproduction of the popular Model T accessory
    • Smooth polished brass finish
    • Includes neoprene gasket and securing nut
    • Overall height 4-1/4", meter diameter 2-3/8"
  • Model T Motor Meter, Wreathed, Chrome
    Model T Motor Meter, Wreathed, Chrome
    x
                These moto meters attach through our "drilled" hex caps, dog bone caps, or winged radiator caps. 
    • Authentic reproduction of the popular Model T accessory
    • Decorative wreathed chrome finish
    • Includes neoprene gasket and securing nut
    • Overall height 4-1/4", meter diameter 2-3/8"
  • Model T Motor Meter, Wreathed, Brass
    Model T Motor Meter, Wreathed, Brass
    x
                These moto meters attach through our "drilled" hex caps, dog bone caps, or winged radiator caps. 
    • Authentic reproduction of the popular Model T accessory
    • Decorative wreathed brass finish
    • Includes neoprene gasket and securing nut
    • Overall height 4-1/4", meter diameter 2-3/8"
  • Model T Hex Radiator Cap, Brass, Undrilled
    Model T Hex Radiator Cap, Brass, Undrilled
    x
                Screws into the top of stock Model T filler necks or our repros. Brass.
            
  • Model T Hex Radiator Cap, Brass, Drilled
    Model T Hex Radiator Cap, Brass, Drilled
    x
                

    Screws into the top of stock Model T filler necks or our repros. This drilled style accepts motor meters.

  • Model T Hex Radiator Cap, Chrome, Undrilled
    Model T Hex Radiator Cap, Chrome, Undrilled
    x
                Screws into the top of stock Model T filler necks or our repros. Chrome.
            
  • Walker B-Z-4811 Z-Series 1917-1923 Ford Engine Model T Radiator
    Walker B-Z-4811 Z-Series 1917-1923 Ford Engine Model T Radiator
    x
                Please view the product's page for more information
            
  • 1923-25 Model T Windshield Frame, Chrome
    1923-25 Model T Windshield Frame, Chrome
    x
                

    Mr. Roadster '23-'25 Model T steel windshield frames are reproductions using the stock dimensions: bottom 38-1/2 " wide, 10-1/8" tall, top 37" wide, 10-1/4" tall. Includes slugs and glass caps. Channel kit is sold separately. No glass or windshield rubber is included with our windshield frames.

    Builder's Tip: Speedway '23-'25 T bodies use a 39-5/8" wide windshield frame when using short posts. If using 3/16" glass or lexan, use with brass setting channel.  If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

  • 1923-25 Model T Windshield Frame, Plain
    1923-25 Model T Windshield Frame, Plain
    x
                

    Mr. Roadster '23-'25 Model T steel windshield frames are reproductions using the stock dimensions: bottom 38-1/2 " wide, 10-1/8" tall, top 37" wide, 10-1/4" tall. Includes slugs and glass caps. Channel kit is sold separately. No glass or windshield rubber is included with our windshield frames.

    Builder's Tip: Speedway '23-'25 T bodies use a 39-5/8" wide windshield frame when using short posts. If using 3/16" glass or lexan, use with brass setting channel.  If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

  • Walker B-C-481-1 Cobra 1917-1923 Ford Model T Radiator for Ford Engine
    Walker B-C-481-1 Cobra 1917-1923 Ford Model T Radiator for Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Chrome dummy filler neck in OEM location - accepts stock caps & accessories 
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    S/B Ford engines can take advantage of less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by

  • Walker B-C-481-2 Cobra 1924-1927 Ford Model T Radiator for Ford Engine
    Walker B-C-481-2 Cobra 1924-1927 Ford Model T Radiator for Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Chrome dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your v

  • Walker Z-481-2 Z-Series 1924-27 Ford Model T Radiator for Chevy Engine
    Walker Z-481-2 Z-Series 1924-27 Ford Model T Radiator for Chevy Engine
    x
                

    Walker Z-Series Ford Model T radiators feature a 4-row, high-flow copper core which is ideal for use with Big Blocks, blowers, and high compression Chevy engines. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. Includes a built-in oil cooler for automatic transmissions.

    • Chrome dummy filler neck in OEM location - accepts stock type caps & accessories
    • Works with original, reproduction steel, or fiberglass grille shells
    • Heavy duty 4-row copper core w/ brass tanks
    • Vertical tubes every 1/4" and 12 fins per inch of height
    • 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock

    Ford Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.   


  • Tanks Inc 28EZ 1928-29 Ford Model A Apron Fill Saddle Fuel Tanks
    Tanks Inc 28EZ 1928-29 Ford Model A Apron Fill Saddle Fuel Tanks
    x
                Upgrade the fuel system on your Model A with  these specially made fuel tank kits for 1928-29 Fords. Easy bolt-on  installation and quality poly construction make these fuel tanks the  perfect addition to your street rod. The tanks simply bolt on along with  your running boards. Then cut a 1-1/2" hole in your splash apron,  install the included grommet and 1-3/4" diameter billet cap/plugs, and  finally plumb and wire the tanks.

    To fill your Model A saddle fuel tanks, remove billet cap/plug, insert fuel nozzle through grommet and into the push-thru cap. It will open to let fuel pass through. When finished, remove the fuel nozzle and the push-thru cap shuts. Now just insert the billet plug and you're finished.
    • Bolt on with running board brackets
    • 6.5 gallon capacity per side
    • Includes switchover valve to switch between left/right tank
    • Requires two 5-bolt senders - not included
    • Push-thru cap does not have to be removed for filling
    • Works on Model A cars and trucks
    • Each tank measures 38" x 7" x 9-3/4"
    • NOTE: The saddle tank design does not work well with fuel injection
  • Tanks Inc 30EZ 1930-31 Ford Model A Apron Fill Saddle Fuel Tanks
    Tanks Inc 30EZ 1930-31 Ford Model A Apron Fill Saddle Fuel Tanks
    x
                

    Upgrade the fuel system on your Model A with these specially made fuel tank kits for 1930-31 Fords. Easy bolt-on installation and quality poly construction make these fuel tanks the perfect addition to your street rod. The tanks simply bolt on along with your running boards. Then cut a 1-1/2" hole in your splash apron, install the included grommet and 1-3/4" diameter billet cap/plugs, and finally plumb and wire the tanks.

    To fill your Model A saddle fuel tanks, remove billet cap/plug, insert fuel nozzle through grommet and into the push-thru cap. It will open to let fuel pass through. When finished, remove the fuel nozzle and the push-thru cap shuts. Now just insert the billet plug and you're finished.

    • Bolt on with running board brackets
    • 6.5 gallon capacity per side
    • Includes switchover valve to switch between left/right tank
    • Requires two 5-bolt senders - not included
    • Push-thru cap does not have to be removed for filling
    • Works on Model A cars and trucks
    • Each tank measures 38" x 7" x 9-3/4"
    • NOTE: The saddle tank design does not work well with fuel injection
  • Walker C-481-1 Cobra 1917-1923 Ford Model T Radiator for Chevy Engine
    Walker C-481-1 Cobra 1917-1923 Ford Model T Radiator for Chevy Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Chrome dummy filler neck in OEM location - accepts stock caps & accessories 
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Ford Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

     

  • Walker Z-481-1 Z-Series 1917-23 Ford Model T Radiator for Chevy Engine
    Walker Z-481-1 Z-Series 1917-23 Ford Model T Radiator for Chevy Engine
    x
                

    Walker Z-Series radiators feature a 4-row, high-flow copper core which is ideal for use with Big Blocks, blowers, and high compression engines. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. Includes a built-in oil cooler for automatic transmissions.

    • Chrome dummy filler neck in OEM location - accepts stock type caps & accessories
    • Works with original, reproduction, steel or fiberglass grille shells
    • 4-row copper core w/ brass tanks
    • Vertical tubes every 1/4" and 12 fins per inch of height
    • 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock

    Ford Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  


  • Walker C-481-2 Cobra 1924-1927 Ford Model T Radiator for Chevy Engine
    Walker C-481-2 Cobra 1924-1927 Ford Model T Radiator for Chevy Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Chrome dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Ford Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • 1928-1929 Model A Flying Quail Radiator Cap
    1928-1929 Model A Flying Quail Radiator Cap
    x
                Quality chrome reproductions of the classy add-on all Model A owners want! Includes radiator cap and quail assembly for 1928-1929 Model A's.  
            
  • 1930-1931 Model A Flying Quail Radiator Cap
    1930-1931 Model A Flying Quail Radiator Cap
    x
                Quality chrome reproductions of the classy add-on all Model A owners want! Includes radiator cap and quail assembly for 1930-1931 Model A's.
            
  • Big Feather Radiator Wing, Chrome
    Big Feather Radiator Wing, Chrome
    x
                

    These big feather wings can be added to most Model T caps for radiators that have a moto meter and drilled cap. Measures 15-1/4" long x 3" wide.

    Moto meter, cap and filler neck sold separately.

  • Big Feather Radiator Wing, Brass
    Big Feather Radiator Wing, Brass
    x
                

    These big feather wings can be added to most Model T caps for radiators that have a moto meter and drilled cap. Measures 15-1/2" long x 3" wide.

    Moto meter, cap and filler neck sold separately.

  • Walker Z-487-2 Z-Series 1930-31 Ford Model A Radiator for Chevy Engine
    Walker Z-487-2 Z-Series 1930-31 Ford Model A Radiator for Chevy Engine
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2 3 4 5