Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"model running boards" Page 1 of 1

  • 1928-1929 Ford Model A Steel Running Boards
    1928-1929 Ford Model A Steel Running Boards
    x
                These 1928-1929 Model A runnings boards are complete with rubber mat and stainless trim.
            
  • 1931 Ford Model A Running Boards & Braces
    1931 Ford Model A Running Boards & Braces
    x
                

    These reproduction steel running boards and running board braces are made to look great on your 1931 Ford Model A.

    • Overall length inside and outside edge is 39-1/4”
    • Width at rear is 9”
    • Width at front is 11-3/8”
    • Covered in a designed rubber mat
    • Braces available for front or rear, left or right.

    Don't forget to purchase our steel Ford Running Board brace to go along with your running boards.

     

  • 1928-1931 Ford Model A Steel Running Board Braces
    1928-1931 Ford Model A Steel Running Board Braces
    x
                

    These pressed steel running board braces are riveted or bolted to the frame to give support to the running boards. These stamped steel brackets are made to fit 1928-1931 Fords but will work for all years.  Choose front or back and left or right.

    When purchasing the rear, specify left or right side in the drop down.

    When purchasing front, left will work for both left and right sides. 

    • Pressed steel 
    • 1928-1931 Fords
    • 17-1/4" long front brackets
    • 15" long rear brackets
    • Choose front or back and left or right
  • 1930 Model A Side Splash Apron & Running Board
    1930 Model A Side Splash Apron & Running Board
    x
                Features running board attached. Stainless trim with rubber mat. Steel construction.  At its widest distance the splash apron is 41.25" long and the running board is 39.25" long.
            
  • Tanks Inc 28EZ 1928-29 Ford Model A Apron Fill Saddle Fuel Tanks
    Tanks Inc 28EZ 1928-29 Ford Model A Apron Fill Saddle Fuel Tanks
    x
                Upgrade the fuel system on your Model A with  these specially made fuel tank kits for 1928-29 Fords. Easy bolt-on  installation and quality poly construction make these fuel tanks the  perfect addition to your street rod. The tanks simply bolt on along with  your running boards. Then cut a 1-1/2" hole in your splash apron,  install the included grommet and 1-3/4" diameter billet cap/plugs, and  finally plumb and wire the tanks.

    To fill your Model A saddle fuel tanks, remove billet cap/plug, insert fuel nozzle through grommet and into the push-thru cap. It will open to let fuel pass through. When finished, remove the fuel nozzle and the push-thru cap shuts. Now just insert the billet plug and you're finished.
    • Bolt on with running board brackets
    • 6.5 gallon capacity per side
    • Includes switchover valve to switch between left/right tank
    • Requires two 5-bolt senders - not included
    • Push-thru cap does not have to be removed for filling
    • Works on Model A cars and trucks
    • Each tank measures 38" x 7" x 9-3/4"
    • NOTE: The saddle tank design does not work well with fuel injection
  • Tanks Inc 30EZ 1930-31 Ford Model A Apron Fill Saddle Fuel Tanks
    Tanks Inc 30EZ 1930-31 Ford Model A Apron Fill Saddle Fuel Tanks
    x
                

    Upgrade the fuel system on your Model A with these specially made fuel tank kits for 1930-31 Fords. Easy bolt-on installation and quality poly construction make these fuel tanks the perfect addition to your street rod. The tanks simply bolt on along with your running boards. Then cut a 1-1/2" hole in your splash apron, install the included grommet and 1-3/4" diameter billet cap/plugs, and finally plumb and wire the tanks.

    To fill your Model A saddle fuel tanks, remove billet cap/plug, insert fuel nozzle through grommet and into the push-thru cap. It will open to let fuel pass through. When finished, remove the fuel nozzle and the push-thru cap shuts. Now just insert the billet plug and you're finished.

    • Bolt on with running board brackets
    • 6.5 gallon capacity per side
    • Includes switchover valve to switch between left/right tank
    • Requires two 5-bolt senders - not included
    • Push-thru cap does not have to be removed for filling
    • Works on Model A cars and trucks
    • Each tank measures 38" x 7" x 9-3/4"
    • NOTE: The saddle tank design does not work well with fuel injection
  • 1926-27 Model T Fiberglass Rear Fenders, Coupe & Roadster, 11 Inch Wide
    1926-27 Model T Fiberglass Rear Fenders, Coupe & Roadster, 11 Inch Wide
    x
                

    Speedway Fiberglass rear fenders for your 1926-1927 Ford Model 'T' Coupe and Roadster.

    • 11-1/16" wide at center top
    • 9-3/8" wide at front by running board
    • Step inwards at front extends upward 9” from front edge
    • Width at rear at midpoint of inward step is 8-¼”
    • Rear inward step extends from mounting lip downwards 7-½”
    • End to end dimension is 41-½”
    • From floor to top of fender while sitting on floor is 19”

    Choose Stock Width, Left or Right.

  • Model A Roadster Pedal Car, Blue
    Model A Roadster Pedal Car, Blue
    x
                All the detail for the true collector. The full fenders and running boards frame the "fatty" wheels. 

    This vintage pedal car features a complete spare tire and wheel combo accentuates the rear.

    Chrome accessories include a double bar front bumper, decorative non-functional headlights, windshield, hood ornament and hubcaps. The custom wood-look steering wheel and custom pleated upholstery and adjustable pedals make for some comfortable crusin'.

    Note: This car includes decorative headlights that are non-functional. The instruction sheet refers to the headlights as functional, but they are not. Also, this car does NOT come with a license plate like the instructions show. 

  • Model A Roadster Pedal Car, Red
    Model A Roadster Pedal Car, Red
    x
                

    All the detail for the true collector!

    This vintage pedal car features full fenders and running boards frame the "fatty" wheels. A complete spare tire and wheel combo accentuates the rear. Chrome accessories include a double bar front bumper, windshield, hood ornament, decorative non-functional headlights and hubcaps.

    The custom wood-look steering wheel and custom pleated upholstery make for some comfortable cruisin'.

    Note: This car includes decorative headlights that are non-functional. The instruction sheet refers to the headlights as functional, but they are not. Also, this car does NOT come with a license plate like the instructions show.  

  • 1931 Ford Model A Fiberglass Front Fenders
    1931 Ford Model A Fiberglass Front Fenders
    x
                

    Quality fiberglass front fenders for 1931 Model A with long splash apron. Specify right or left.

    Truck Freight Shipping Charges Apply - click here for details

  • Model A Fire Truck Pedal Car
    $249.99
    Model A Fire Truck Pedal Car
    x
                This is one hot collectible. The chrome parts are just amazing and include grille, working bell, adjustable windshield, radiator cap, gate rails and bumper.

    This vintage pedal car features beautiful chrome headlight housings with decorative non-functional headlights.

    The all metal, stamped steel construction is finished off with lead free powder coated paint.

    Car features adjustable pedals, wood-look steering wheel, opening tailgate, padded seats, running boards and treaded tires.

    Note: This car includes decorative headlights that are non-functional. The instruction sheet refers to the headlights as functional, but they are not. Also, this car does NOT come with a license plate like the instructions show.  

  • 1926-27 T Splash Aprons
    $109.99
    1926-27 T Splash Aprons
    x
                Our fiberglass side splash aprons are a replacement for '26-'27 T bodies. Choose LH or RH side.