Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"mini mustang car" Page 1 of 1

New (0)

Garage Sale (0)

  • Steve Smith Autosports V290 DVD - Building the Mustang Mini Stock
    Steve Smith Autosports V290 DVD - Building the Mustang Mini Stock
    x
                

    A step-by-step buildup of a Mustang Mini Stock project car. Steve Smith Autosports built a complete project car for the Building The Mustang Ministock book and captured the process onto DVD. Provides detailed instruction on how to build you own race car.

  • Steve Smith Autosports S289 Book - Building the Mustang Mini Stock
    Steve Smith Autosports S289 Book - Building the Mustang Mini Stock
    x
                

    A step-by-step buildup of a Mustang Mini Stock project car. Provides detailed instruction on how to build you own race car.

    • Finding a suitable car
    • Stripping the car
    • Installing a roll cage
    • Working with a unibody chassis
    • Using a McPherson strut front suspension
    • Designing the front suspension geometry
    • Working with the stock 4-point rear suspension and coil springs
    • Complete race car fabrication and preparation
    • Complete chassis setup and alignment
    • Scaling the car and adjusting the weight
    • Chassis adjustments and troubleshooting
    • Ford 2300cc performance engine build-up
    • For dirt and paved tracks
  • Accel 1858 Red Heat Shrink Sleeves, 4 Pack
    Accel 1858 Red Heat Shrink Sleeves, 4 Pack
    x
                

    These red shrink tubes work perfect for sealing battery terminal connections.  They protect battery to cable connections by creating a water tight seal. 

    • Ideal for use on battery cable connections or spark plug wires
    • 4 sleeves in a kit at 4 inches long each
  • Small Block Ford Block Hugger Tight-Fit Headers, Plain
    Small Block Ford Block Hugger Tight-Fit Headers, Plain
    x
                

    For years it seemed like installing a 289-302-351W Ford in your street rod was a far bigger challenge than using a small-block Chevy. One significant problem was finding compact shorty headers. Well, problem solved! These tight-fit headers are designed to hug tight against your small block Ford V8 and can make seemingly impossible installations much easier to tackle. 

    For factory style oval port heads. Will work with GT40P heads. Includes 2.5" collector reducers to 2.25" pipe, gaskets and bolts.

    • Must be used with 910-67210 (auto trans) or 910-9504 (3/8" throw manual trans) style mini starter or equivalent compact starter
    • We recommend motor mounts 270-2221 (Left) and 270-2220 (Right)
    • Left mount may need to be ground 1/4” to provide clearance for collector
    • Fits engines with forward sump oil pans

    Tight-Fit Header Instructions (PDF)

    Header Dimension Chart

     

  • Small Block Ford, Block Hugger Tight-Fit Headers, Chrome
    Small Block Ford, Block Hugger Tight-Fit Headers, Chrome
    x
                

    For years it seemed like installing a 289-302-351W Ford in your street rod was a far bigger challenge than using a small-block Chevy. One significant problem was finding compact shorty headers. Well, problem solved! These tight-fit headers are designed to hug tight against your small block Ford V8 and can make seemingly impossible block hugger headers installations much easier to tackle. 

    For factory style oval port heads. Will work with GT40P heads. Includes 2.5" collector reducers to 2.25" pipe, gaskets and bolts.

    • Must be used with 910-67210 (Fuel Injected Engines) or 910-67462 (Carbureted Engines) style mini starter or equivalent compact starter
    • We recommend motor mounts 270-2221 (Left) and 270-2220 (Right)
    • Left mount may need to be ground 1/4” to provide clearance for collector
    • Chrome headers are polished before and after plating for show quality appearance
    • Fits engines with forward sump oil pans

    930-0201 Instructions (PDF)

    S/B Ford Header Dimension Chart (GIF) 

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the

  • Small Block Ford, Block Hugger, Tight-Fit Headers, AHC Coated
    Small Block Ford, Block Hugger, Tight-Fit Headers, AHC Coated
    x
                

    For years it seemed like installing a 289-302-351W Ford in your street rod was a far bigger challenge than using a small-block Chevy. One significant problem was finding compact shorty headers. Well, problem solved! These tight-fit headers are designed to hug tight against your small block Ford V8 and can make seemingly impossible block hugger headers installations much easier to tackle. These block hugger headers are ceramic coated headers.

    For factory style oval port heads. Will work with GT40P heads. Includes 2.5" collector reducers to 2.25" pipe, gaskets and bolts.

    • Must be used with 910-67210 (Fuel Injected Engines) style mini starter or equivalent compact starter
    • We recommend motor mounts 270-2221 (Left) and 270-2220 (Right)
    • Left mount may need to be ground 1/4” to provide clearance for collector
    • Fits engines with forward sump oil pans

    930-0201 Instructions (PDF)

    S/B Ford Header Dimension Chart (GIF) 

  • Accel 1859 Black Heat Shrink Sleeves, 4 Pack
    Accel 1859 Black Heat Shrink Sleeves, 4 Pack
    x
                

    These black shrink tubes work perfect for sealing battery terminal connections.  They protect battery to cable connections by creating a water tight seal. 

    • Ideal for use on battery cable connections or spark plug wires
    • 4 sleeves in a kit at 4 inches long each