Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"milled small block chevy" Page 1 of 1

  • Moroso 26150 Chevy Distributor Shim Kit
    Moroso 26150 Chevy Distributor Shim Kit
    x
                

    Eliminates oil pump bind and spark scatter when using a distributor in an engine with milled heads or decks. Shims fit between the intake manifold and your distributor allowing you to properly set gear mesh. Made from leak-free, high impact nylon.

    • Eliminates oil pump bind and spark scatter 
    • Prevents wiping out your distributor gear
    • Made from high impact nylon to exact GM gasket specs
    • Kit contains 3 sizes; .030", .060" & .100"
  • Edelbrock 2925 Super Victor Small Block Chevy Intake Manifold
    Edelbrock 2925 Super Victor Small Block Chevy Intake Manifold
    x
                

    Edelbrock's Super Victor (3500-8500 rpm) is a high-performance, feature-packed racing manifold for standard port location 23-degree cylinder heads. A taller profile with extra long runners that extend into the plenum offers increased volume. The cross-sectional area of the runners are tuned to complement the runner length creating substantial torque increases at 4500-5500 rpm.

    For Chevrolet 262-400 c.i. Small-Block V8. The Super Victor is designed for heads with standard port location and the runners match the "flat floor" entry of the latest 23° heads. It's about 1" taller than the Victor Jr., putting the carb pad height at 5-1/2" from end seals.

    • Slotted flange bolt holes to allow mating on decked blocks or milled heads
    • Rear water outlets allow custom cooling system routing
    • Flange above the intake ports is machined flat to provide a straight-line reference for port-matching layout
    • A boss for a distributor clamp has been added on the left side, for easier to access when timing an engine
    • Each runner has a nitrous boss to aid in fogger nozzle installation

    325-2925 Instructions (PDF)

  • 1987-Up Small Block Chevy Tall Valve Covers, Ball Milled
    1987-Up Small Block Chevy Tall Valve Covers, Ball Milled
    x
                

    Polished cast aluminum valve covers with the look of billet for your late Small Block Chevy center bolt heads. Ball milled top design. Includes baffles and valve cover bolts.

    • Overall height: 3-5/8"
    • Valve cover depth: 3-1/2"
    • One 1-3/16" push in hole per cover
  • 1960-1986 Small Block Chevy Tall Valve Covers, Ball Milled
    1960-1986 Small Block Chevy Tall Valve Covers, Ball Milled
    x
                

    Polished aluminum tall valve covers have the look of billet style. Ball milled top. One 1-3/16" diameter hole per cover for push-in breather. This valve cover has baffles.

    Use 1.25" O.D. grommets (not included).

  • C&S Specialties Small Block Chevy Alcohol Fuel Pump
    C&S Specialties Small Block Chevy Alcohol Fuel Pump
    x
                

    C&S Specialties has addressed all problem areas of previous 6-valve pumps in designing their rugged Tool Steel mechanical fuel pumps. This exclusive casting design adds material in 7 places to eliminate cracking, breakage, waviness and leakage. Plus, six High Flow pumping valves, combined with internal porting, are proven to deliver twice the fuel flow over other 6-valve alcohol pumps.

    • Unique baked-on coating to resist corrosion
    • Unique stepped diaphragm reduces stress and increases life
    • Two stainless steel springs instead of one increases reliability
    • CNC milled pump arm from tool steel, not stamped steel
    • Pump arm bushing made from tool steel
    • Pump shaft also made of tool steel, not stamped steel
    • 1/2" NPT inlet and outlet
  • Manley 42132 Small Block Chevy Pushrod Length Checker, 7/16 Stud
    Manley 42132 Small Block Chevy Pushrod Length Checker, 7/16 Stud
    x
                

    For Small Block Chevy. Just slip it over a 7/16" rocker arm stud to instantly tell how much longer or shorter the push rods need to be.

    • Long valves, milled heads, cut blocks, small base circle camshafts all move rocker geometry far from optimum
    • Correct length pushrods keep rockers centered on the valve tip and reduce stem and guide wear
    • Checker tells the engine builder instantly what length pushrod is required
  • Manley 42137 Small Block Chevy Pushrod Length Checker, 3/8 Stud
    Manley 42137 Small Block Chevy Pushrod Length Checker, 3/8 Stud
    x
                

    For Small Block Chevy. Just slip it over a 3/8" rocker arm stud to instantly tell how much longer or shorter the push rods need to be.

    • Long valves, milled heads, cut blocks, small base circle camshafts all move rocker geometry far from optimum
    • Correct length pushrods keep rockers centered on the valve tip and reduce stem and guide wear
    • Checker tells the engine builder instantly what length pushrod is required
  • Lightweight Sprint Car Front Motor Plate
    Lightweight Sprint Car Front Motor Plate
    x
                

    Low weight and high strength – what more do you need in a sprint car torque plate? This front torque plate is machined from aluminum and is milled for extra weight savings.

    • Lightweight aluminum construction
    • One-piece design
    • Milled for weight savings
  • 1960-86 Small Block Chevy Tall Valve Covers, Flame Milled, Polished Alum.
    1960-86 Small Block Chevy Tall Valve Covers, Flame Milled, Polished Alum.
    x
                

    These polished aluminum valve covers have the look of billet. They feature a flame top design with an overall height of 3-3/4".  For use on 1960-86 small block Chevy - 283-350 engines.

    • Available with flame top design
    • 1960-86 small block Chevy - 283-350
    • Overall height of 3-3/4"
    • Baffles included
    • Polished aluminum finish

    Note:  These valve covers have 1 hole on each cover so you will need either two breathers or a breather and a PCV breather, sold separately.


  • 1987-Up Small Block Chevy Tall Valve Covers, Flame Milled
    1987-Up Small Block Chevy Tall Valve Covers, Flame Milled
    x
                

    Polished cast aluminum valve covers with the look of billet for your late Small Block Chevy centerbolt heads. Flamed top design. Includes baffles and valve cover mounting bolts.

    • Overall height is 3-3/4"
    • I.D. of the breather hole is 1.176"
    • Use with breathers 910-11033 or 550-2068
    • For applications where a PCV valve is needed, use 910-11034
  • SuperSeal Small Block Chevy Intake Gasket Set, 1205 Style, 1/8 Inch Thick
    SuperSeal Small Block Chevy Intake Gasket Set, 1205 Style, 1/8 Inch Thick
    x
                

    SuperSeal high-performance intake manifold gaskets for 265-400 SB Chevy V8 engines.

    • Thicker 1/8" gaskets designed for milled heads/intakes 
    • No end seals - use silicone gasket maker
    • Heat crossover port is blocked
    • Compare to Fel-Pro

    Installation Note:  Gasket must be installed with the embossed silicone side towards the cylinder head.

  • SuperSeal Small Block Chevy Intake Gasket Set, 1206 Style, 1/8 Inch Thick
    SuperSeal Small Block Chevy Intake Gasket Set, 1206 Style, 1/8 Inch Thick
    x
                

    SuperSeal high-performance intake manifold gaskets for 265-400 SB Chevy V8 engines.

    • Thicker 1/8" gaskets designed for milled heads/intakes 
    • No end seals - use silicone gasket maker
    • Heat crossover port is blocked
    • Compare to Fel-Pro
  • SuperSeal Small Block Chevy Intake Gasket Set, 1204 Style, 1/8 Inch Thick
    SuperSeal Small Block Chevy Intake Gasket Set, 1204 Style, 1/8 Inch Thick
    x
                

    SuperSeal high-performance intake manifold gaskets for 265-400 SB Chevy V8 engines.

    • Thicker 1/8" gaskets designed for milled heads/intakes 
    • No end seals - use silicone gasket maker
    • Heat crossover port is blocked
    • Compare to Fel-Pro
  • SuperSeal Small Block Chevy Intake Gasket Set, Vortec Heads, 1/8 Thick
    SuperSeal Small Block Chevy Intake Gasket Set, Vortec Heads, 1/8 Thick
    x
                

    SuperSeal high-performance intake manifold gaskets for 265-400 SB Chevy V8 engines.

    • Thicker 1/8" gaskets designed for milled heads/intakes 
    • No end seals - use silicone gasket maker
    • Heat crossover port is blocked
    • Compare to Fel-Pro
  • World S/R Small Block Chevy Cylinder Heads, Straight Plug, 1.94/1.50 Valves
    World S/R Small Block Chevy Cylinder Heads, Straight Plug, 1.94/1.50 Valves
    x
                Please view the product's page for more information
            
  • Garage Sale - SuperSeal Small Block Chevy Intake Gasket Set, 1206 Style, 1/8 Inch Thick
    Garage Sale
    Garage Sale - SuperSeal Small Block Chevy Intake Gasket Set, 1206 Style, 1/8 Inch Thick
    x
                

    These intake gaskets are garage sale priced because they were stuck together and the paper tore on one, what you see is what you get.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

    SuperSeal high-performance intake manifold gaskets for 265-400 SB Chevy V8 engines.

    • Thicker 1/8" gaskets designed for milled heads/intakes 
    • No end seals - use silicone gasket maker
    • Heat crossover port is blocked
    • Compare to Fel-Pro
  • Garage Sale - Arias Sprintmaster 350 Small Block Chevy Pistons
    Garage Sale
    Garage Sale - Arias Sprintmaster 350 Small Block Chevy Pistons
    x
                

    Off the shelf custom pistons for the small block Chevy.  

    • Light weight aluminum.
    • Left and right domed configuration
    • Radiused domes & valve reliefs
    • 13:1 based on 67cc heads
    • provision for angle milled heads
    • 2.50" Barstock wristpins with double spirolox
    • Wrist pin oilers
    • Hollow dome forgings where needed
    • .030 Oversized
    • Storke: 3.480"
    • Rod length: 6" 
    • CID: 355
    • Piston Weight: 469g

    This set of pistons is garage sale priced because they discontinued.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - Arias Sprintmaster 350 Small Block Chevy Pistons
    Garage Sale
    Garage Sale - Arias Sprintmaster 350 Small Block Chevy Pistons
    x
                

    Off the shelf custom pistons for the small block Chevy.  

    • Light weight aluminum.
    • Left and right domed configuration
    • Radiused domes & valve reliefs
    • 13:1 based on 67cc heads
    • provision for angle milled heads
    • 2.50" Barstock wristpins with double spirolox
    • Wrist pin oilers
    • Hollow dome forgings where needed

    This set of pistons is garage sale priced because it is not a complete set. Only seven pistons are included.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - Arias Sprintmaster Chevy 350 Pistons
    Garage Sale
    Garage Sale - Arias Sprintmaster Chevy 350 Pistons
    x
                

    Off the shelf custom pistons for the small block Chevy with 5.7" rods.

    • Light weight aluminum.
    • Left and right domed configuration
    • Radiused domes & valve reliefs
    • 13:1 based on 67cc heads
    • provision for angle milled heads
    • 2.50" Barstock wristpins with double spirolox
    • Wrist pin oilers
    • Hollow dome forgings where needed

    This set of pistons is garage sale priced because they discontinued.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - RHS Pro Action Bare Chevy Cast Iron Head, Straight Plug, 200CC/64CC
    Garage Sale
    Garage Sale - RHS Pro Action Bare Chevy Cast Iron Head, Straight Plug, 200CC/64CC
    x
                Please view the product's page for more information