Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"milled billet aluminum" Page 1 of 1

  • Ball Milled Billet Aluminum Oval Air Cleaner, 12 Inch
    Ball Milled Billet Aluminum Oval Air Cleaner, 12 Inch
    x
                

    Theses highly polished aluminum air cleaners have the look of billet without the expense. This 12" Ball-Milled Air Cleaner is cast aluminum, approximately 1/4" thick, polished, and the grooves you see are actually ball-milled. Even the base is 1/4" cast aluminum and polished. Fits carburetors with 5-1/8" air horns.  Measures 12" long x 8-3/8" wide x 3" high.

    • Ball-Milled Air Cleaner
    • Highly polished cast aluminum
    • Fits carburetors with 5-1/8" air horns
    • 1/4" thick
    • 12" long x 8-3/8" wide x 3" high
  • Lokar X70-BHBF Billet Hand Brake Boot Ring w/Floor Mount Boot, Black
    Lokar X70-BHBF Billet Hand Brake Boot Ring w/Floor Mount Boot, Black
    x
                

    Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum rings are available in black anodized.

    Lokar's Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever. It also includes a foam rubber seal to eliminate air flow from the floor through the boot.  All boots hug the shifter lever and there are no unsightly pull ties or laces.

    • Black Naugahyde construction
    • Rings available in black anodized
    • Foam rubber seal to eliminate air flow from the floor through the boot
    • Includes:
      • boot
      • billet aluminum ring with ball-milled edge
      • stainless screws

    Boot Ring Dimension Chart (Link)

  • Billet Aluminum Spark Plug Wire Linear Dividers, Ball Milled
    Billet Aluminum Spark Plug Wire Linear Dividers, Ball Milled
    x
                These billet spark plug wire guides offer a clean alternative to the ignition  wire dilemma by routing the wires in a simple straight-forward fashion. Their  aluminum construction features a polished finish that will make your motor stand out while keeping the  wires safely off the hot exhaust. They are a universal fit and should work with most Ford, GM, and Mopar V-8 engines. These billet wire looms feature adjustable tabs that attach to the base of the valve covers with their  mounting bolts.  Use up to 8mm wire on nearly any V8 engine.
    • Internal grooves conceal and divide spark plug wires up to 8 MM in diameter
    • Adjustable mounting tabs allow installation on nearly any V8 engine
    • Polished aluminum
    • Smooth design
  • EMPI 16-3536 Billet Aluminum 8 Inch Diameter Fuel Tank Mount, Pair
    EMPI 16-3536 Billet Aluminum 8 Inch Diameter Fuel Tank Mount, Pair
    x
                

    These polished billet aluminum gas tank mounts from EMPI feature a polished stainless steel strap and milled horizontal lines that match EMPI's other billet accessories.

    • Polished billet aluminum mount
    • Stainless steel straps
    • 8" diameter
    • Hardware included
    • Sold as a pair
  • EMPI 16-3537 Replacement Fuel Tank Mounting Bracket, 10 Inch Diameter, Pair
    EMPI 16-3537 Replacement Fuel Tank Mounting Bracket, 10 Inch Diameter, Pair
    x
                

    These polished billet aluminum gas tank mounts from EMPI feature a polished stainless steel strap and milled horizontal lines that match EMPI's other billet accessories.

    • Polished billet aluminum mount
    • Stainless steel straps
    • 10" diameter
    • Hardware included
    • Sold as a pair
  • Lokar X70-BFMB Billet Floor Mount Shifter Boot Ring w/Boot, Black
    Lokar X70-BFMB Billet Floor Mount Shifter Boot Ring w/Boot, Black
    x
                

    Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum ring features a black anodized finish.

    It also includes a foam rubber seal to eliminate air flow from the floor through the boot.  All boots hug the shifter lever and there are no unsightly pull ties or laces.

    • Black Naugahyde construction
    • Foam rubber seal to eliminate air flow from the floor through the boot
    • Includes:
      • boot
      • billet aluminum ring with ball-milled edge
      • stainless screws

    Boot Ring Dimension Chart (Link)

  • Ball Milled Billet-Style Oval Air Cleaner, 15 Inch
    Ball Milled Billet-Style Oval Air Cleaner, 15 Inch
    x
                

    Theses highly polished aluminum air cleaners have the look of billet without the expense. Attractive ball milled top. Fits carburetors with 5-1/8" air horns.

    Measures 15" long x 8-3/8" wide x 3" high.

  • Billet Ball Milled Rear View Mirror
    Billet Ball Milled Rear View Mirror
    x
                

    Billet aluminum ball milled interior rear view mirror. Includes windshield slug for attachement. Windshield adhesive not included.

    • Length:  9-1/4"
    • Height:  2-1/4" 

     

     

  • Lokar XBAG-6129 64-67 Chevelle Billet Aluminum Throttle Pedal Assembly
    Lokar XBAG-6129 64-67 Chevelle Billet Aluminum Throttle Pedal Assembly
    x
                

    Direct replacement Throttle Pedal Assemblies for 1964 - 1967 Chevelle with ball-milled pad or with rubber inserts eliminate the factory rod linkage, are designed to mount in the original firewall location and utilize a modern Lokar Throttle Cable system. The arms are splined for fine adjustment and can be switched for right and left adjustment of the throttle pad, which is spring-loaded and measures 2"x5".

    For a compact and clean look, Lokar has put a modern bend on classic brake/clutch pedal pads. These curved brake/clutch pedal pads add style and function to your classic car. Designed with hidden screws, these pads are curved to match and bolt directly to the factory steel brake/clutch pedal. Each brake/clutch pedal pad has been fashioned after its corresponding factory rubber pad and is available in a black finish.

    • Direct replacement for 1964-1967 Chevy Chevelle
    • Ball-milled pads with rubber inserts
    • Eliminate the factory rod linkage
    • Mount in the original firewall location and utilize a modern Lokar Throttle Cable system
    • Arms are splined for fine adjustment and can be switched for right and left adjustment of the throttle pad
    • Spring-loaded and measures 2"x5"
    • Black finish

    Throttle Pedal Assembly Installation Instructions (PDF)

  • 1987-Up Small Block Chevy Tall Valve Covers, Flame Milled
    1987-Up Small Block Chevy Tall Valve Covers, Flame Milled
    x
                

    Polished cast aluminum valve covers with the look of billet for your late Small Block Chevy centerbolt heads. Flamed top design. Includes baffles and valve cover mounting bolts.

    • Overall height is 3-3/4"
    • I.D. of the breather hole is 1.176"
    • Use with breathers 910-11033 or 550-2068
    • For applications where a PCV valve is needed, use 910-11034
  • Lokar 70-BHBF Billet Hand Brake Boot Ring With Floor Mount Boot
    Lokar 70-BHBF Billet Hand Brake Boot Ring With Floor Mount Boot
    x
                

    Lokar Hand Brake Boots include a black Naugahyde boot, billet aluminum ring with ball milled edge, and stainless screws.

    It also includes a foam rubber seal to eliminate air flow from the floor through the boot.

    All boots hug the shifter lever and there are no unsightly pull ties or laces.

  • Universal Gauge Panel
    $29.99
    Universal Gauge Panel
    x
                
    • Ball milled billet aluminum
    • Accepts a 3 3/8" Speedometer & two 2 1/16" gauges
  • 1960-1986 Small Block Chevy Tall Valve Covers, Ball Milled
    1960-1986 Small Block Chevy Tall Valve Covers, Ball Milled
    x
                

    Polished aluminum tall valve covers have the look of billet style. Ball milled top. One 1-3/16" diameter hole per cover for push-in breather. This valve cover has baffles.

    Use 1.25" O.D. grommets (not included).

  • Billet Specialties 30425 Billet Vin Tec Steering Wheel
    Billet Specialties 30425 Billet Vin Tec Steering Wheel
    x
                

    Billet Specialties is the worldwide leader in billet steering wheels. Their relentless attention to detail is apparent both front and back on these works of automotive art. The backside of each wheel features milled finger notches for an ultra-comfortable grip.

    Wheel ONLY - half-wrap trim, horn button, and steering column adapter available separately. Has a 14" diameter with a 2" dish.

  • Billet Specialties 30725 Billet Classic Steering Wheel
    Billet Specialties 30725 Billet Classic Steering Wheel
    x
                

    Billet Specialties is the worldwide leader in billet steering wheels. Their relentless attention to detail is apparent both front and back on these works of automotive art. The backside of each wheel features milled finger notches for an ultra-comfortable grip.

    Wheel ONLY - half-wrap trim, horn button, and steering column adapter available separately. Has a 14" diameter with a 2" dish.

  • Billet Specialties 30175 Billet Fast Lane Steering Wheel
    Billet Specialties 30175 Billet Fast Lane Steering Wheel
    x
                

    Billet Specialties is the worldwide leader in billet steering wheels. Their relentless attention to detail is apparent both front and back on these works of automotive art. The backside of each wheel features milled finger notches for an ultra-comfortable grip.

    Wheel ONLY - half-wrap trim, horn button, and steering column adapter available separately. Has a 14" diameter with a 2" dish.

  • Billet Specialties 30137 Billet Split Spoke Steering Wheel
    Billet Specialties 30137 Billet Split Spoke Steering Wheel
    x
                

    Billet Specialties is the worldwide leader in billet steering wheels. Their relentless attention to detail is apparent both front and back on these works of automotive art. The backside of each wheel features milled finger notches for an ultra-comfortable grip.

    Wheel ONLY - half-wrap trim, horn button, and steering column adapter available separately. Has a 14" diameter with a 2" dish.

  • Lokar 70-BHRB Billet Round Shifter Boot Ring With Boot
    Lokar 70-BHRB Billet Round Shifter Boot Ring With Boot
    x
                

    Lokar Shifter Boots are black Naugahyde and include a boot, billet aluminum ring with ball-milled edge and stainless screws.

    It also includes a foam rubber seal to eliminate air flow from the floor through the boot.

    All boots hug the shifter lever and there are no unsightly pull ties or laces.

  • 1987-Up Small Block Chevy Tall Valve Covers, Ball Milled
    1987-Up Small Block Chevy Tall Valve Covers, Ball Milled
    x
                

    Polished cast aluminum valve covers with the look of billet for your late Small Block Chevy center bolt heads. Ball milled top design. Includes baffles and valve cover bolts.

    • Overall height: 3-5/8"
    • Valve cover depth: 3-1/2"
    • One 1-3/16" push in hole per cover
  • 1967-1972 Chevy Truck Glove Box Lid
    1967-1972 Chevy Truck Glove Box Lid
    x
                

    Give the dash of your 1967-72 Chevy or GMC truck a clean, custom look with this polished billet aluminum glove box lid. The glove box lid is the perfect complement to gauge panel 9100367, with a matching ball-milled design and brilliant polished finish.

  • Lokar BAG-6076 1955-57 Chevy Billet Brake/Clutch Pedal Cover
    Lokar BAG-6076 1955-57 Chevy Billet Brake/Clutch Pedal Cover
    x
                

    These pedal covers go over your 1955-57 Chevy clutch and non-power brake pedals and are retained by 4 allen head button bolts that screw into the back side.

    • Outside measurement of 3-7/8" x 2-5/8" fits 4-3/4" x 2-3/8" original steel pedal.
    • Thickness of billet is approximately 1-2”
    • Rubber insets extend an additional 1/16”
    • Recess in back is 3-¼” long and 1-5/8” tall by 5/16” deep
  • 1960-86 Small Block Chevy Tall Valve Covers, Flame Milled, Polished Alum.
    1960-86 Small Block Chevy Tall Valve Covers, Flame Milled, Polished Alum.
    x
                

    These polished aluminum valve covers have the look of billet. They feature a flame top design with an overall height of 3-3/4".  For use on 1960-86 small block Chevy - 283-350 engines.

    • Available with flame top design
    • 1960-86 small block Chevy - 283-350
    • Overall height of 3-3/4"
    • Baffles included
    • Polished aluminum finish

    Note:  These valve covers have 1 hole on each cover so you will need either two breathers or a breather and a PCV breather, sold separately.


  • 1953-1955 Ford Truck Gauge Panel
    1953-1955 Ford Truck Gauge Panel
    x
                Brighten up your 1953-55 F-100 dash and gain the benefit of modern instruments with this polished billet aluminum dash panel. The ball-milled panel is designed to accept a 3-3/8 inch speedometer in the center, with two 2-1/16 inch accessory gauges on each side. Gauges sold separately.
            
  • Garage Sale - Billet Ball Milled Rear View Mirror
    Garage Sale
    Garage Sale - Billet Ball Milled Rear View Mirror
    x
                

    Billet aluminum ball milled interior rear view mirror. Includes windshield slug for attachement. Windshield adhesive not included.

    • Length:  9-1/4"
    • Height:  2-1/4" 
     
    This is garage sale priced because the stud broke off.
     
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  
  • Garage Sale - 1953-1955 Ford Truck Gauge Panel
    Garage Sale
    Garage Sale - 1953-1955 Ford Truck Gauge Panel
    x
                

    Brighten up your 1953-55 F-100 dash and gain the benefit of modern instruments with this polished billet aluminum dash panel. The ball-milled panel is designed to accept a 3-3/8 inch speedometer in the center, with two 2-1/16 inch accessory gauges on each side. Gauges sold separately. 

     

    This is garage sale priced because it has some scratches from shipping.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS