Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"metric brake hose" Page 1 of 3

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3950 Instructions (PDF)

  • GM Metric Disc Brake to 9 Inch Ford Bracket Set
    GM Metric Disc Brake to 9 Inch Ford Bracket Set
    x
                Allows you to bolt '78 an Up GM Metric disc brakes on Ford 9" rearend.  Hardware sold separately.

    Includes:
    • 2 Caliper brackets
    • 2 Adapter plates
    • 2 Spacer plates
    • 8 5/16" spacers
    • 8 1/8" spacers

    Note:  This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts.  If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so.  Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

  • 1978-Up GM Metric Brake Calipers, IMCA Approved
    1978-Up GM Metric Brake Calipers, IMCA Approved
    x
                

    These stock replacement single piston Metric calipers were standard equipment on 1978-88 GM mid-size cars (Cutlass, Grand Prix, Regals, Monte Carlo, etc.). They feature a 2.38" single piston, shielded bottom inlet, and will save 3-1/2 lbs. per side compared to mid-size 1969-1977 caliper.

     

    • IMCA approved
    • No core charge required
    • 7/16"-20 inlet
    • Can be used with brake hoses from Pre-1978 GM intermediate cars
    • Brake pads & bolts sold separately

     

    Note: Does NOT include brake pads or slider bolts and bushings.

  • Speedway IMCA Mod Brake Kit
    $489.99
    Speedway IMCA Mod Brake Kit
    x
                Our affordable Speedway brake system comes with everything you'll need for your IMCA racer.

    Kit includes:
    • GM Metric Clamp-on Calipers
    • 7/16"-20 RH & LH Metric Calipers
    • Wilwood Polymatrix D Brake Pads
    • GM Caliper Slide Bolt
    • 7/16" to AN4 Banjo Fitting
    • 7/16"-20" Banjo Bolt
    • 18" Brake Line w/ Straight
    • 26" Brake Line w/ 90° End
    • 3/8"-24 Female to AN4 Fitting
    • Lightweight Brake Line Kit
  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3948 Instructions (PDF)

  • Jet Mod Brake Kit
    $699.99
    Jet Mod Brake Kit
    x
                This kit is patterned after the setup that Johnny "The Jet" Saathoff used to drive to FOUR IMCA National Championships. Comes with everything that you'll need to set up your IMCA racers braking system.

    Kit includes:
    • 7/16"-20" RH & LH Metric Calipers
    • Wilwood Polymatrix D Brake Pads
    • GM Caliper Slide Bolts
    • GM Metric Clamp-on Caliper Bolts
    • 7/16" to AN4 Banjo Fittings
    • 7/16"-20 Banjo Bolts
    • Lightweight Brake Line
    • 3/8"-24 Female to AN4 Fitting
    • 19" Brake Line w/ 90° Ends
    • 26" Brake Line w/ 90° Ends
    • Mini Brake Gauge Panel
    • RH & LH Front Caliper Bracket
  • GM Metric Disc Brake Kit for 910-34921 1955-57 2" Drop Spindles
    GM Metric Disc Brake Kit for 910-34921 1955-57 2" Drop Spindles
    x
                

    Disc brake kit features 10-½” GM vented cast iron rotors and 1978-88 GM metric single piston calipers.

    • 10-1/2" rotors (O.E. on 1979-81 GM Midsize: Malibu, Monte Carlo, Cutlass, Regal, etc.) 
    • 5 x 4-3/4" bolt pattern
    • Rubber Brake Lines
    • 1978-88 GM Metric Calipers
    • 7/16"-20 inlet fitting
    • Includes all hardware: pads, slide bolts, seals, inner & outer wheel bearings, spindle nuts, dust caps

    Spindles sold separately.

    910-31992 Instructions (PDF)

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 54-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 54-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3946 Instructions (PDF)

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 52-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 52-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3944 Instructions (PDF)

  • Stainless Braided 19 Inch Front Brake Hoses, 10mm-1.5
    Stainless Braided 19 Inch Front Brake Hoses, 10mm-1.5
    x
                These steel braided front brake lines are 19" overall length. They are for common 1978-1988 GM metric style calipers and include 10mm x 1.5 banjo fittings for one end and have 3/8"-24 inverted flare female on the other. Stainless steel braid significantly reduces hose expansion under pressure, which results in a firmer pedal feel versus rubber hoses.
            
  • Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3546 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 52-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 52-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3544 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3550 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3548 Instructions (PDF)

  • Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    x
                

    These kits allow you to mount front disc brakes on your 1955-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series). Front disc brakes provide a significant improvement in braking performance versus the drum brakes your old Chevy came with. This disc brake kit works with stock, drum brake spindles only - it does not work with 2" drop spindles. Kit will work with 14" wheels intended for disc brake applications, as well as most 15" (or larger) wheels.

    Rotors are 11" diameter with 5 on 4-3/4" bolt pattern and calipers have 7/16"-20 inlets. This kit will increase track width 7/8" per side or 1-3/4" total when installed. 

    • 11" Rotors
    • 5 on 4-3/4" - bolt pattern
    • Metric calipers
    • Calipers mount behind axle (rearward)
    • Will work with 14" & larger wheels intended for use with disc brakes
    • Bearings, pads, brackets included
    • Seals and hoses
    • Hardware included
    • Increases trac-width 7/8" per side
    • For '55-'64 Chevy fullsize cars. 

    910-31911 Instructions (PDF)

     

  • Mustang II IFS, Std. Control Arms, Air Ride, Dropped Spindles, Wilwood Brakes
    Mustang II IFS, Std. Control Arms, Air Ride, Dropped Spindles, Wilwood Brakes
    x
                Hub-to-hub kit includes standard upper and offset strutless lower  control arms, new 2"  dropped spindles, rubber brake lines, air ride  springs/shocks, new manual or rebuilt power rack & pinion with  bushings and  new tie rods. The 10-3/4" Wilwood brake kit features GM   Metric calipers with rubber  hoses, with your choice of 5 x 4-1/2" or 5 x  4-3/4" bolt  pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • New 2" Dropped Spindles
      • Air Ride Springs/Shocks
      • Rack and Pinion with bushings and tie rods
      • 10-3/4" Wilwood brake kit with GM Metric calipers
      • Choose 5 x 4-1/2" or 5 x 4-3/4" bolt pattern
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note:  OEM rubber brake hoses generally cannot be adapted to Wilwood calipers. The caliper inlet fitting is a 1/8-27 NPT. The preferred method is to use steel adapter fittings at the caliper, either straight, 45 or 90 degree and enough steel braided line to allow for full suspension travel and turning radius, lock to lock.

    Note:  If using these kits with Speedway or Heidts crossm

  • AFCO 7010-0050 Bleeder Adapter for GM Metric Calipers, 4 Pack
    AFCO 7010-0050 Bleeder Adapter for GM Metric Calipers, 4 Pack
    x
                

    Brake pressure gauge bleeder screw adapters for GM metric calipers. Pack of 4.

    Read more about bleeding brakes in our tech article, How To Bleed Your Brake Lines

  • Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-3/4
    Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-3/4
    x
                

    An economical, lightweight brake kit for 1949-54 Chevy car spindles. Your stock Chevy spindles must be machined, or use Speedway '49-'54 Chevy-style spindles. This kit uses 9-1/4" Mustang II vented rotors with common GM metric calipers.

    • Typically used on Model T and Model A to 1936 Ford front ends 
    • For use on street rod tube front axles when using 1949-54 Chevy style spindles  
    • Will not work with stock 1949-54 steering arms 
    • Not to be installed on stock 1949-54 Chevy vehicle front ends

    910-31956 Instructions (PDF)

  • Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-1/2
    Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-1/2
    x
                

    An economical, lightweight brake kit for 1949-54 Chevy car spindles. Your stock Chevy spindles must be machined, or use Speedway '49-'54 Chevy-style spindles. This kit uses 9-1/4" Mustang II vented rotors with common GM metric calipers.

    • Typically used on Model T and Model A to 1936 Ford front ends 
    • For use on street rod tube front axles when using 1949-54 Chevy style spindles  
    • Will not work with stock 1949-54 steering arms 
    • Not to be installed on stock 1949-54 Chevy vehicle front ends

    910-31955 Instructions (PDF)

  • AFCO 7010-0049 Stock and Oversized Metric Caliper Bleed Screw
    AFCO 7010-0049 Stock and Oversized Metric Caliper Bleed Screw
    x
                

    AFCO metric caliper replacment bleeder screw.

    Read more about bleeding brakes in our tech article, How To Bleed Your Brake Lines. 

     

  • Mustang II IFS, Std. Control Arms, Air Ride, Stock Spindles, Wilwood Brakes
    Mustang II IFS, Std. Control Arms, Air Ride, Stock Spindles, Wilwood Brakes
    x
                Hub-to-hub kit includes standard upper and offset strutless lower control arms, new  standard spindles, rubber brake lines, air ride springs/shocks, new manual or rebuilt power rack & pinion with bushings and  new tie rods. The 10-3/4" Wilwood brake kit features GM  Metric calipers with rubber  hoses, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt  pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • New Stock Spindles
      • Air Ride Springs/Shocks
      • Rack and Pinion with bushings and tie rods
      • 10-3/4" Wilwood brake kit with GM Metric calipers
      • Choose 5 x 4-1/2" or 5 x 4-3/4" bolt pattern
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note:  OEM rubber brake hoses generally cannot be adapted to Wilwood calipers. The caliper inlet fitting is a 1/8-27 NPT. The preferred method is to use steel adapter fittings at the caliper, either straight, 45 or 90 degree and enough steel braided line to allow for full suspension travel and turning radius, lock to lock.

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford P

  • Dirtworks 4-Link Brake Kit
    $589.99
    Dirtworks 4-Link Brake Kit
    x
                This Dirtworks 4-link brake kit comes with the calipers, brackets, and gauges necessary to set up and install a brake system on your IMCA modified racer.

    Kit includes:
    • RH & LH Brake Brackets
    • 7/16"-20 RH & LH Metric Calipers
    • Wilwood Polymatrix D GM Metric Pads
    • Slide Bolt GM Caliper
    • 7/16" to AN4 Banjo Fittings
    • 7/16"-20 Banjo Fittings
    • Lightweight Brake Line
    • 3/8"-24 Female to AN4 Fittings
    • 19" Brake Line w/ 90° Ends
    • 26" Brake Line w/ 90° Ends
    • Mini Brake Gauge Panel
  • Dirtworks 2-Link Brake Kit
    $609.99
    Dirtworks 2-Link Brake Kit
    x
                This Dirtworks 2-link brake kit comes with the calipers, brackets, and gauges necessary to set up and install a brake system on your IMCA modified racer.

    Kit includes:
    • RH & LH Brake Brackets
    • 7/16"-20 RH & LH Metric Calipers
    • Wilwood Polymatrix D GM Metric Pads
    • Slide Bolt GM Caliper
    • Caliper Brackets
    • 7/16" to AN4 Banjo Fittings
    • 7/16"-20 Banjo Fittings
    • Lightweight Brake Line
    • 3/8"-24 Female to AN4 Fittings
    • 19" Brake Line w/ 90 Degree Ends
    • 26" Brake Line w/ 90 Degree Ends
    • Mini Brake Gauge Panel
  • Ford 9 Inch Bolt-On Rear Disc Brake Kit
    Ford 9 Inch Bolt-On Rear Disc Brake Kit
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM metric style calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31902 Instructions (PDF)

  • Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  

    • For 48" kingpin-to-kingpin axles
    • Traditional steering arm for left front wheel NOT included with Traditional steering kit
    • Available with 5x4.5" or 5x4.75" hubs

    Spindle Identification Guide (GIF)

  • Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                Please view the product's page for more information
            
  • Mustang II IFS, Narrow Arms, Air Ride, Dropped Spindles, Wilwood Brakes
    Mustang II IFS, Narrow Arms, Air Ride, Dropped Spindles, Wilwood Brakes
    x
                Hub-to-hub kit includes 5/8" narrower upper and offset strutless  lower  control arms, 2" dropped spindles, rubber brake lines, air ride  , new manual or rebuilt power rack & pinion with  bushings  and   new tie rods. The 10-3/4" Wilwood brake kit features GM  Metric calipers  with rubber  hoses, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt   pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • 5/8" narrower Tubular Upper and Lower Strutless Control Arms
      • 2" Dropped Spindles
      • Air Ride Suspension shocks
      • Rack and Pinion with bushings and tie rods
      • 10-3/4" Wilwood brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note:  OEM rubber brake hoses generally cannot be adapted to Wilwood calipers. The caliper inlet fitting is a 1/8-27 NPT. The preferred method is to use steel adapter fittings at the caliper, either straight, 45 or 90 degree and enough steel braided line to allow for full suspension travel and turning radius, lock to lock.

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959

  • Mustang II IFS, Short Control Arms, Air Ride, Stock Spindles, Wilwood Brakes
    Mustang II IFS, Short Control Arms, Air Ride, Stock Spindles, Wilwood Brakes
    x
                

    Hub-to-hub kit includes 5/8" narrower upper and offset strutless lower control arms, new standard spindles, rubber brake lines, air ride , new manual or rebuilt power rack & pinion with bushings and new tie rods. The 10-3/4" Wilwood brake kit features GM Metric calipers with rubber hoses, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.

    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • 5/8" narrower Tubular Upper and Lower Strutless Control Arms
      • New Standard Spindles
      • Air Ride Suspension shocks
      • Rack and Pinion with bushings and tie rods
      • 10-3/4" Wilwood brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note:  OEM rubber brake hoses generally cannot be adapted to Wilwood calipers. The caliper inlet fitting is a 1/8-27 NPT. The preferred method is to use steel adapter fittings at the caliper, either straight, 45 or 90 degree and enough steel braided line to allow for full suspension travel and turning radius, lock to lock.

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Picku

  • Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    x
                

    Easily installs 11" rotors and the 1978-up GM Metric calipers to your 1937-48 Ford passenger car and 1937-47 1/2 ton Ford spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. Uses Ford/Mopar wheel bolt pattern of 5 on 4-1/2".

    910-31945 Instructions (PDF)

  • Wilwood 120-6426 1978-Up GM3 Metric Aluminum Caliper
    Wilwood 120-6426 1978-Up GM3 Metric Aluminum Caliper
    x
                Aluminum caliper is completely interchangeable with stock GM caliper (racing only).
    One stainless piston, 11" to 13" diameter, .810" thick rotors. 3.7 lbs. 5.5" mount center.

    1/8" NPT brake line inlet.

    Metric caliper is 1978 and newer style.

    Wilwood Data Sheet

  • Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Steering and Brake Kit for 46 Inch Ford Axle
    Steering and Brake Kit for 46 Inch Ford Axle
    x
                

    This kit makes it easy to order a steering and brake kit in plain or chrome for your Ford axle. Included in kit are forged '37-'41 Ford spindles with fitted kingpins, 1-3/4" dropped bolt-on arms, 11" brake rotors with 5 on 4.5" or 5 on 4.75" bolt pattern, brackets, bearings and seals, mounting hardware, GM Metric calipers, spindle nuts, dust caps, brake lines with tabs, tie rod ends, and tie rod tube.

    • Ford Spindles
      • One piece forged 4140 steel
      • Modeled after the 1937-41 round-back design
      • Standard king pins fit to spindles
      • Spindle Identification Guide (Link)
    • Speedway 11" Brake Kit
      • 11" vented iron rotor, 1" thick 
      • Wheel studs - 1/2" Fine (4-1/2" BP), 7/16" Fine (4-3/4" BP)
      • GM Metric '78-'88 calipers, 2-1/2" piston

    Choose 46" or 48" axle width kit. For spring over axles only.

  • Disc Brake Kit 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    Disc Brake Kit 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    x
                

    Easily install 11" rotors and 1978-88 GM Metric calipers to your 1937-48 Ford passenger car style spindles with no machine work needed. This disc brake kit is great for street rods based on 1932-1948 Fords. For lightweight cars like T-buckets or early roadsters, we recommend the Wilwood kits. This front disc brake conversion kit works well with bolt-on steering arms. The 11" diameter rotors have the GM wheel bolt pattern of 5 x 4-3/4". Calipers have 7/16"-20 inlets.

    910-31946 Instructions (PDF)

  • Mustang II Complete 11 Inch Brake Kit, Ford 5 x 4-1/2 Bolt Pattern
    Mustang II Complete 11 Inch Brake Kit, Ford 5 x 4-1/2 Bolt Pattern
    x
                Upgrade your Mustang II based suspension from the stock 9-1/4" rotors to our 11" rotors with powerful single piston GM metric floating calipers. This simple bolt-on conversion requires no machining. For use on 1974-80 Pinto, Bobcat and Mustang II spindles.

    Features a 5 on 4-1/2" Ford/Mopar wheel bolt pattern (increases track width 1/2" per side). Includes two 16" front brake hoses and 7/16"-20 banjo bolts with crush washers.

    910-31944 Instructions (PDF)

  • 3/8 Inch or 10MM to AN3 Metric Banjo Fitting
    3/8 Inch or 10MM to AN3 Metric Banjo Fitting
    x
                

    These steel banjo fittings adapt a 3/8" or 10mm-1.5 banjo bolt to a AN style brake line. Crush washers not included. Must also purchase our 10mm crush washers.

    Banjo fittings sold in pairs.

  • Mustang II IFS, Narrow Control Arms, Coilover Springs, Stock Spindles
    Mustang II IFS, Narrow Control Arms, Coilover Springs, Stock Spindles
    x
                Please view the product's page for more information
            
  • Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Steering and Brake Kit for 48 Inch Ford Axle
    Steering and Brake Kit for 48 Inch Ford Axle
    x
                

    This kit makes it easy to order a steering and brake kit in plain or chrome for your Ford axle. Included in kit are forged '37-'41 Ford spindles with fitted kingpins, 1-3/4" dropped bolt-on arms, 11" brake rotors with 5 on 4.5" or 5 on 4.75" bolt pattern, brackets, bearings and seals, mounting hardware, GM Metric calipers, spindle nuts, dust caps, brake lines with tabs, tie rod ends, and tie rod tube.

    • Ford Spindles
      • One piece forged 4140 steel
      • Modeled after the 1937-41 round-back design
      • Standard king pins fit to spindles
      • Spindle Identification Guide (Link)
    • Speedway 11" Brake Kit
      • 11" vented iron rotor, 1" thick 
      • Wheel studs - 1/2" Fine (4-1/2" BP), 7/16" Fine (4-3/4" BP)
      • GM Metric '78-'88 calipers, 2-1/2" piston

    Choose 46" or 48" axle width kit. For spring over axles only.

  • GM Metric Caliper Fitting, 10mm - 1.5 to -3 AN, Steel Male Adapter Connector
    GM Metric Caliper Fitting, 10mm - 1.5 to -3 AN, Steel Male Adapter Connector
    x
                

    Made from high-quality steel, these bulkhead adapters from Speedway give you an easy way to connect lines through firewalls or frames.

    These fittings have AN at one end and 10mm-1.5" on the other end. It can be screwed into a GM metric caliper with 10mm-1.5" threads if you use our crush washers (part number 617-3642). 

    Steel Male Adapter Connector Fitting 

    • AN to IFM all steel adapter
    • 10mm - 1.5 to -3 AN

     

  • AFCO 7250-0120 GM 7.5 Inch Axle Brake Kit
    AFCO 7250-0120 GM 7.5 Inch Axle Brake Kit
    x
                

    These rear disc brake kits allow you to simply bolt disk brakes onto your 7.5" GM rearend. Includes two bolt-on caliper brackets, two vented rotors, two new single-piston GM Metric calipers and hardware. Has 5 x 4-3/4" bolt pattern.

    Minor fitting to axle housing may be required. 

    Kit includes:

    • 11-5/8" one-piece vented iron rotors
    • Caliper brackets
    • Metric calipers, 2-1/2" pistons
      • 10mm - 1.5 inlet
    • Brake pad spacers
    • AFCO C1 pads
      • Medium-High temp rating
      • Extremely rotor friendly, exceptional pad life
    • Slide bolts
    • All hardware included

     

Goto Previous PagePrevious Page
1 2 3