Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"master power booster" Page 1 of 2

  • 1955-57 Chevy Car Disc/Drum Brake Booster Master Cylinder Combo
    1955-57 Chevy Car Disc/Drum Brake Booster Master Cylinder Combo
    x
                

    When you put modern front disc brakes on your '55-'57 Chevy car, you should update the master cylinder as well. The stock '55-'57 drum brake master cylinder does not have the capacity to supply the proper amount of pressure for front disc brakes. This simple bolt-on power brake assembly will ensure your brakes are operating at peak performance.

    • Kit contains a 1" bore master cylinder with 1/2"-20 and 9/16"-18 outlets, 8" dual diaphragm booster, and a disc/drum combination valve (provides proportioning and metering).
    • Also includes line to connect the prop/metering block to the master cylinder and the necessary hardware to mount the booster to your original '55-'57 Chevy brake pedal.
    • Measures 14-1/4" from firewall bracket to end of master cylinder.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Power Brake Booster Conversion Plate
    Power Brake Booster Conversion Plate
    x
                

    If your car currently has manual brakes and you want power brakes, you have to build a new mount for the brake booster. With this plate you will be able to bolt your booster to your existing 2-bolt master cylinder mount.

    Fits boosters with four bolts on 3-3/8" centers. Fits master cylinder mounts with 3-1/4" or 3-3/8" centers.

  • 1963-66 Chevy Pickup Brake Power Booster Kit
    1963-66 Chevy Pickup Brake Power Booster Kit
    x
                

    Complete the disc brake conversion on your 1963-66 Chevy pickup (or enhance your exhisting brake system) with this high quality master cylinder and brake booster kit. It includes a 8" power booster, dual-chamber master cylinder and a proportioning valve specifically designed for 1963-66 Chevy trucks. The easy-to-install kit can be set up for disc/drum or four-wheel disc applications.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Power Brake Kit for 1964-66 Ford Mustang with Automatic Transmission
    New
    Power Brake Kit for 1964-66 Ford Mustang with Automatic Transmission
    x
                
    Complete the disc brake conversion on your 1964-66 Mustang (or enhance your existing brake system) with this high quality master cylinder and brake booster kit. It includes a 7" power booster, dual-chamber master cylinder and a proportioning valve specifically designed for 1964-66 Ford Mustangs. The easy-to-install kit can be set up for disc/drum or four-wheel disc applications.
    • For 64-66 Mustang originally equipped with an automatic transmission
    • 7" single booster with brackets and extension
    • Includes master cylinder, booster, and proportioning valve

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

     

  • Power/Manual Master Cylinder, 1-1/8 Inch Bore
    Power/Manual Master Cylinder, 1-1/8 Inch Bore
    x
                

    Corvette-style master cylinder has a 1-1/8" bore and is suited for disc/drum combinations. Features dual outlets so the plumbing can come out either side of the master cylinder. These master cylinders will work with manual or power brake systems. They come with a deep-well piston for manual brakes and an adapter to fill the deep well for use with a power booster.

    • 3/8"-24 IFF outlet ports
    • Plugs are included for the unused ports
    • Mount spacing is 3-3/8" on center
    • Works with power or manual brake systems

    Brake System Builder's Tip (Link)

    Note: Customers intending to use this as a manual brake pedal assembly should note that the pushrod and boot are not included.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Chrome Power Brakes Master Cylinder
    Chrome Power Brakes Master Cylinder
    x
                

    This beautiful chrome master cylinder is highly versitile featuring outlets on both sides and a 1" bore. Has 3/8"-24 IFF outlets (includes 2 plugs for unused ports).

    For use with power brake boosters - NOT for use with manual brake systems. Suitable for use with front disc/rear drum brake systems.

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • TCI 600-6570-56 Under-Floor Power Brake / Hydraulic Clutch Assembly
    TCI 600-6570-56 Under-Floor Power Brake / Hydraulic Clutch Assembly
    x
                

    Want to put a manual transmission in your street rod?  These universal pedal assemblies offer a clean, simple way to mount your brake master cylinder and hydraulic clutch master cylinder to the frame, under the floor.  Kits include a bracket and pedals, plus new brake and clutch master cylinders.  Power brake kit has a 7” brake booster and matching master cylinder.

    • Overall length from front of pedal arm to back of master cylinder is 25-1/2"
    • Overall width from frame rail to right side of booster is 11-1/8"
    • Height from top of pedal assembly to bottom of booster is 6-3/4"
    • Top of pedal assembly to center of pedal pad mounting hole is 8-1/2"

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

     

  • 1955-57 Chevy Car Disc/Disc Brake Booster Master Cylinder Combo
    1955-57 Chevy Car Disc/Disc Brake Booster Master Cylinder Combo
    x
                

    When you put modern front & rear disc brakes on your '55-'57 Chevy car, you should update the master cylinder as well. Why not use one of these simple bolt-on power brake systems? Kits contain a 1" bore master cylinder with 1/2"-20 and 9/16"-18 outlets, 8" dual diaphragm booster, and a knob style proportioning/metering valve. Also includes the necessary hardware to mount the booster to your original '55-'57 Chevy brake pedal.

    Measures 14-1/4" from firewall bracket to end of master cylinder.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Single Diaphragm 7 Inch Power Brake Booster
    Single Diaphragm 7 Inch Power Brake Booster
    x
                Please view the product's page for more information
            
  • Electric Power Master Cylinders - Disc/Disc
    Electric Power Master Cylinders - Disc/Disc
    x
                

    These electrically boosted master cylinders are really slick. Rather than using bulky vacuum boosters to generate increased hydraulic force, they employ remote-mounted electric pumps and accumulators to build brake pressure.

    The compact and attractive aluminum master cylinder can easily be retro-fitted on the firewall of most American cars, or can be frame mounted if you have 5-1/4" of under-floor clearance.

    12 volt electric pump and accumulator assembly can be mounted out of sight on the frame or in the trunk. Available for disc/disc or disc/drum applications.

    104-10564 Instructions (PDF)

    Low pressure or return line is a 3/8" hose fitting, located on the driver's side of the master cylinder when mounted to the firewall.  

    The pumps feature 3/8"-24 IFF high pressure line from the master cylinder. A return or low pressure line is a 3/8" hose fitting. A 48" piece of return line is supplied with both kits.

    The master cylinder has slotted mounting holes with spacing that will accept a 3-1/16" to 3-7/16" on center mounting distance, and will accept both 3/8" and 10MM bolts. The reservoir is 10" long by 3" wide by 3" tall.

    The master cylinder and reservoir together measure 10" long by 3-1/4" wide by 5-1/4" tall. The

  • Electric Power Master Cylinder - Disc/Drum
    Electric Power Master Cylinder - Disc/Drum
    x
                

    These electrically boosted master cylinders are really slick. Rather than using bulky vacuum boosters to generate increased hydraulic force, they employ remote-mounted electric pumps and accumulators to build brake pressure.

    The compact and attractive aluminum master cylinder can easily be retro-fitted on the firewall of most American cars, or can be frame mounted if you have 5-1/4" of under-floor clearance.

    12 volt electric pump and accumulator assembly can be mounted out of sight on the frame or in the trunk. For disc/drum applications.

    104-10562 Instructions (PDF)

    Low pressure or return line is a 3/8" hose fitting, located on the driver's side of the master cylinder when mounted to the firewall.  

    The pumps feature 3/8"-24 IFF high pressure line from the master cylinder. A return or low pressure line is a 3/8" hose fitting. A 48" piece of return line is supplied with both kits.

    The master cylinder has slotted mounting holes with spacing that will accept a 3-1/16" to 3-7/16" on center mounting distance, and will accept both 3/8" and 10MM bolts. The reservoir is 10" long by 3" wide by 3" tall.

    The master cylinder and reservoir together measure 10" long by 3-1/4" wide by 5-1/4" tall. The pushrod h
  • Under-Dash Brake Pedal Assembly, Dual Diaphragm
    Under-Dash Brake Pedal Assembly, Dual Diaphragm
    x
                

    This universal bolt-on swing pedal assembly provides a secure way to mount the brake power booster and master cylinder on the firewall when upgrading brakes on a wide range of cars and trucks. Pedal bracket can be trimmed to fit your application and has holes to place pedal pivot point at 7", 8.5", 10", 11.5", or 13" from the firewall.

    • Includes a dual feed 1" bore master cylinder
    • Dual front outlets 1/2"-20 IFF
    • Dual rear outlets 9/16"-18 IFF
    • Plugs are included for un-used ports
    • Dual diaphragm 7" diameter booster
    • Pedal Length:  13-1/8" from pivot point to pad hole
    • Mount Bracket:  14" long
    • Booster Bolt Pattern:  3-3/8" square

    Booster Tech Tip (GIF)

  • 1964-1966 Mustang Brake Booster Mounting Bracket Kit for 91031409
    1964-1966 Mustang Brake Booster Mounting Bracket Kit for 91031409
    x
                

    This bracket makes it easy to convert to power brakes. It is designed to convert a manual brake Mustang to power brakes. It is NOT an OEM replacement bracket. It accepts our 7” booster and 1” master cylinder combo number 91031409. The booster mount pattern is 3-3/8” center to center both vertically and horizontally in a 4 bolt square pattern.

    • Makes it easy to convert to power brakes
    • Designed to convert a manual brake Mustang to power brakes
    • Accepts our 7” booster and 1” master cylinder combo: number 91031409
    • Mount pattern: 3-3/8” center to center
    • 4 bolt square pattern
  • Universal Fit Firewall Mount Brake Pedal Assembly
    Universal Fit Firewall Mount Brake Pedal Assembly
    x
                Use this bracket when you want to install a firewall mounted master cylinder pedal. These universal brackets mount both the pedal and master cylinder. Works with manual master cylinders (with 3-1/4" bolt centers) or power boosters (with 3-3/8" x 3-3/8" bolt pattern). Made from laser-cut 1/4" thick steel plate. 
    • Brake pedal assembly
    • Mounts neatly on your firewall
    • Universal fit
    • 6:1 pedal ratio
    • Bronze bushings provide smooth operation
    • Zinc plated finish for corrosion resistance
    • Made in the U.S.A.
    • Pedal pad sold separately
    Dual brake/clutch master cylinder pedal assemblies are also available under p/n 91631992.
  • 1955-1964 Chevy Power Brake Booster Bracket, Passenger Cars
    1955-1964 Chevy Power Brake Booster Bracket, Passenger Cars
    x
                

    This bracket makes it easy to convert to power brakes while keeping the master cylinder level. The bracket is designed to work with 1955-64 Chevrolet A Body and B body passenger cars such as the Bel Air, Biscayne, Impala and Caprice. The booster side of this bracket has the common 3-3/8” center to center both vertical and horizontal.  

    • Makes it easy to convert to power brakes
    • 3-3/8” center to center both vertical and horizontal - booster side
    • Designed to work with 1955-64 Chevrolet A Body and B body cars (Bel Air, Biscayne, Impala, Caprice)

    Note: Depending on the application, this kit, in many cases changes the mechanical advantage or pedal ratio. With power assist less pedal pressure is required and to help eliminate some of the pedal travel the attachment location on the pedal arm may be further from the pivot point. You will need to have a straight alignment of the rod to the assembly and also a straight in alignment of the push rod to the booster.

  • 1955-64 Chevy Full-size Car Brake Booster Combo, Disc/Disc, Drum/Drum
    1955-64 Chevy Full-size Car Brake Booster Combo, Disc/Disc, Drum/Drum
    x
                

    When you put modern disc brakes on your 1955-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series), you should update the master cylinder as well. Stock 4-wheel drum master cylinders do not have the capacity to supply the proper amount of pressure for disc brakes. For best results, we recommend using this simple, bolt-on master cylinder booster kit on all 4-wheel disc brake conversions or as a power brake upgrade for 4-wheel drum brake applications.

    • 8" dual diaphragm booster
    • 1" bore master cylinder
    • Adjustable proportioning valve for rear brake line
    • Master cylinder has outlets on both sides for ease of plumbing
    • 1/2"-20 and 9/16"-18 outlets

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • 1964-1974 GM Disc Brake Booster Conversion Kit Combo
    1964-1974 GM Disc Brake Booster Conversion Kit Combo
    x
                

    When you put modern disc brakes on the front of your 1964-1974 GM midsize car, you should update the master cylinder as well. Why not go to this simple bolt on power brake system? The 1" bore Corvette-style master cylinder features two different outlet sizes to fit all GM applications. 

    • 1" bore master cylinder with 1/2"-20 and 9/16"-18 outlet
    • Disc brake conversion kit
    • 9" Slimline Single Diaphragm
    • Fits: 1964-1974 GM midsize car
    • Includes:
      • booster
      • master cylinder
      • proportioning valve
      • bracket
      • pedal rod extension and clevis

    *Please refer to "Application" tab for corresponding vehicle fit.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Under-Dash Brake Pedal Assembly, Single Diaphragm
    Under-Dash Brake Pedal Assembly, Single Diaphragm
    x
                

    This universal bolt-on swing pedal assembly provides a secure way to mount the brake power booster and master cylinder on the firewall when upgrading brakes on a wide range of cars and trucks. Pedal bracket can be trimmed to fit your application and has holes to place pedal pivot point at 7", 8.5", 10", 11.5", or 13" from the firewall.

    • Includes a dual feed 1" bore master cylinder
    • Dual front outlets 1/2"-20 IFF
    • Dual rear outlets 9/16"-18 IFF
    • Plugs are included for un-used ports
    • Single diaphragm 7" booster

    Booster Tech Tip (GIF)

  • Speedway 1949-54 Chevy Car Brake Pedal/Master/Booster Assembly
    Speedway 1949-54 Chevy Car Brake Pedal/Master/Booster Assembly
    x
                

    Use this great conversion kit to make your old Chevy stop safely and reliably when converted over to an automatic transmission application. Use in conjunction with front disc brake conversion 910-1954 and rear drum brakes.

    • Direct bolt in for 1949-54 Chevy cars
    • Corvette-style dual reservoir master cylinder
    • 7" dual diaphragm booster
    • Black powder coat and gold zinc finish
    • For disc/drum applications
    • Modification to stock brake lines required
    • For automatic transmission application only

    Works well when used with 1949-54 Chevy car front disc brake conversion kit 910-1954.

  • Dual Diaphragm 7 Inch Stainless Brake Booster
    Dual Diaphragm 7 Inch Stainless Brake Booster
    x
                

    These show-quality polished stainless steel 7" boosters feature a dual diaphragm housing for use with heavier cars or pickups. Accepts most power brake master cylinders.

    • Pushrod stud is 3/8" fine thread
    • Master cylinder studs are two 3/8" coarse studs across from each other on 3-3/8" centers
    • Booster is 5" thick

    Booster Tech Tip (GIF)

    Learn more about selecting the proper brake booster for your vehicle by reading our tech article. Brake System Selection.  

  • Single Diaphragm 7 Inch Chrome Brake Booster
    Single Diaphragm 7 Inch Chrome Brake Booster
    x
                

    These show-quality chrome 7" diameter boosters have a single diaphragm for use with lightweight cars. Accepts most power brake master cylinders.

    • Pushrod stud is 3/8" fine thread
    • Master cylinder studs are two 3/8" coarse studs across from each other on 3-3/8" centers
    • Booster is 3-3/4" thick

    Booster Tech Tip (GIF)

    Learn more about selecting the proper brake booster for your vehicle by reading our tech article. Brake System Selection.  

  • Aluminum Master Cylinder w/ Stainless Bore
    Aluminum Master Cylinder w/ Stainless Bore
    x
                

    Brake fluid can ruin your master cylinder in just a few years. Stop the problem by using a stainless steel sleeved master cylinder. Our sleeved GM-style aluminum master cylinder provides a weight savings and longer service life. It has 2 mounting holes on a 3-1/4" center for 3/8" or 10mm bolts.

    • 1" stainless steel sleeved bore
    • Unpolished aluminum
    • Height from center line to the top most point on the retaining bar is 3.5"
    • 3/8"-24 inverted flare ports on each side
    • Includes plugs for the side not used
    • Deep piston design for manual or power brakes 
    • Pushrod NOT included

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • 8 Inch Dual Brake Booster
    $109.99
    Product Rating: 4.75 Stars
    8 Inch Dual Brake Booster
    x
                

    Compact, 8" diameter for installation under floor or on firewall of almost any vehicle. Zinc chromate finish.

    Booster Tech Tip (GIF) 

    Brake System Builder's Tip (Link)

    Learn more about the proper uses of residual valves by reading our tech article. Brake System Selection

  • Deluxe Chromed Aluminum Master Cylinder
    Deluxe Chromed Aluminum Master Cylinder
    x
                

    This aluminum master cylinder features a double adjustable proportioning valve, removable metering valve, stop light switch port and a larger fluid capacity. It is approximately the same size as the Corvette master cylinder but only weighs 5 lbs. 1" bore. 3/8"-24 IFF outlets. 

    910-31455 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Chevy Wilwood Front Brake & Steering Kits, 48 Inch Axle
    Chevy Wilwood Front Brake & Steering Kits, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1949-54 Chevy spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .380" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs
  • Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1937-48 Ford spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .38" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Traditional steering arm for left front wheel NOT included with kit.

  • Wilwood 140-11013 1937-1948 Ford Heavy Duty Disc Brakes
    Wilwood 140-11013 1937-1948 Ford Heavy Duty Disc Brakes
    x
                

    Wilwood Forged Dynalite Pro-Series Front Hub Kits offer a complete disc brake upgrade solution for your 1937-48 Ford spindles. Based on the venerable forged billet Dynalite caliper, these versatile kits suit the braking requirements and style preferences for a daily driver, serious competition, or the most discriminating show enthusiast.

    Most kits require no modifications for installation, and provide plenty of clearance inside popular 15” wheels. FDL Pro-Series kits can be used with either manual or power boost master cylinders.

    Wilwood Heavy Duty Kits Feature:

    • Forged 4-piston Dynalite Calipers
    • 11.00" diameter Ultralite HP 30 Vane iron rotors - plain finish
    • Wilwood BP-10 SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    835-14011013 Instructions (PDF)

    *NOTE*: See Notes tab for important install info.

  • Wilwood 140-7675 1964-74 GM Front Disc 12.19 Inch Big Brake Kit
    Wilwood 140-7675 1964-74 GM Front Disc 12.19 Inch Big Brake Kit
    x
                

    Need a big brake package that can scrub off serious speed and look great doing it?Wilwood's Forged Dynalite Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditionaldisc brakespindle applications onclassic Chevymuscle cars. All kits can be used with manual or power boost master cylinders.

    12.19" Big Brake Series features:

    • Forged 4-pistonDynalite Calipers - black finish
    • 12.19" diameter Ultralite HP 32 Vane rotors - plain finish
    • Wilwood BP-10SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    • Minimum wheel diameter of 16"

    All kits include calipers, hubs, rotors, brackets and hardware needed. Brake hoses sold separately.

    835-1407675 Instructions (PDF)

     

  • Wilwood 140-10996 1964-74 GM Front Disc 11 Inch Pro Series Brake Kit
    Wilwood 140-10996 1964-74 GM Front Disc 11 Inch Pro Series Brake Kit
    x
                

    Need a big brake package that can scrub off serious speed and look great doing it?Wilwood's Forged Dynalite Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditionaldisc brakespindle applications onclassic Chevymuscle cars. All kits can be used with manual or power boost master cylinders.

    11.00" Pro Series Brakes feature:

    • Forged 4-pistonDynalite Calipers - black finish
    • 11.00" diameter Ultralite HP 30 Vane rotors - plain finish
    • Wilwood BP-10SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    • Provides plenty of clearance inside popular 15” wheels.

    All kits include calipers, hubs, rotors, brackets and hardware needed. Brake hoses sold separately.

    835-14010996 Instructions (PDF)

     

  • Wilwood 140-1501-B 1937-1948 Ford Medium Duty Disc Brakes
    Wilwood 140-1501-B 1937-1948 Ford Medium Duty Disc Brakes
    x
                Please view the product's page for more information
            
  • Wilwood 140-11013-P 1937-1948 Ford Heavy Duty Polished Disc Brakes
    Wilwood 140-11013-P 1937-1948 Ford Heavy Duty Polished Disc Brakes
    x
                

    Wilwood Forged Dynalite Pro-Series Front Hub Kits offer a complete disc brake upgrade solution for your 1937-48 Ford spindles. Based on the venerable forged billet Dynalite caliper, these versatile kits suit the braking requirements and style preferences for a daily driver, serious competition, or the most discriminating show enthusiast.

    Most kits require no modifications for installation, and provide plenty of clearance inside popular 15” wheels. FDL Pro-Series kits can be used with either manual or power boost master cylinders.

    Wilwood Heavy Duty Kits Feature:

    • Forged 4-piston Dynalite Calipers
    • 11.00" diameter Ultralite HP 30 Vane iron rotors - plain finish
    • Wilwood BP-10 SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    835-1402260P Instructions (PDF)

    *NOTE*: See Notes tab for important install info.

  • Wilwood 13 Inch Big Brake Kit For A, F, X Body
    Wilwood 13 Inch Big Brake Kit For A, F, X Body
    x
                

    Need a big brake package that can scrub off serious speed and look great doing it? Wilwood's Forged Dynalite Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditional disc brake spindle applications on classic Chevy muscle cars.  All kits can be used with manual or power boost master cylinders.

    • Forged 4-piston Dynalite Calipers - black finish
    • 13" diameter Ultralite HP 32 Vane rotors - plain finish
    • Wilwood BP-10 SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    • Minimum wheel diameter of 17"

    Instructions (PDF) 

    Application Chart

  • Wilwood 140-1501-P 1937-1948 Ford Medium Duty Polished Disc Brakes
    Wilwood 140-1501-P 1937-1948 Ford Medium Duty Polished Disc Brakes
    x
                

    Wilwood Forged Dynalite Pro-Series Front Hub Kits offer a complete disc brake upgrade solution for your 1937-48 Ford spindles. Based on the venerable forged billet Dynalite caliper, these versatile kits suit the braking requirements for a light weight Model T or T bucket type chassis. Medium Duty kits are recommended for use on T bucket type cars up to 2200 pounds with rear discs or on cars up to 2000 pounds with rear drums. 

    Most kits require no modifications for installation, and provide plenty of clearance inside popular 15” wheels. FDL Pro-Series kits can be used with either manual or power boost master cylinders.

    Wilwood Medium Duty Kits Feature:

    • Forged 4-piston Dynalite Calipers
    • 10.75" diameter solid steel rotors - black oxide finish
    • Wilwood BP-10 SmartPads - low noise, low dust
    • Lightweight anodized aluminum hubs

    835-1401501P Instructions (PDF)

    *NOTE*: See Notes tab for important install info. 

  • 1967-1969 Mustang Disc Brake Kit
    1967-1969 Mustang Disc Brake Kit
    x
                

    Replace those outdated and inadequate drum brakes on your Ford Mustang with this complete, easy-to-install disc brake conversion kit. This manual, non-power disc brake kit for 1967-1969 Mustang uses a 5 on 4-1/2" bolt pattern and will fit inside 14" x 7" or larger wheels.

    • Works on 6-cylinder or V8 drum brake spindles
    • Master cylinder will not bolt to stock booster on vehicles with O.E. power drum brakes
    • Fits inside 14" x 7" or larger wheels

    Kit Includes:

    • 43mm 4-Piston Calipers
    • Vented Rotors
    • Pads
    • Mounting Brackets
    • Proportioning Valves
    • Dual Bowl Master Cylinder
    • Flex Hoses
    • Lines
    • Bearings & Seals
    • All hardware included
  • 1964-1966 Mustang Disc Brake Kit
    1964-1966 Mustang Disc Brake Kit
    x
                

    Replace those outdated and inadequate drum brakes on your vintage Ford Mustang with this complete, easy-to-install disc brake conversion kit. This manual, non-power disc brake kit for 1964-1966 Mustang uses a 5 on 4-1/2" bolt pattern and will fit inside 14" x 7" or larger wheels.

    • Only works on V8 drum brake spindles. 
    • Master cylinder will not bolt to stock booster on vehicles with O.E. power drum brakes.
    • Fits inside 14" x 7" or larger wheels

    Kit includes:

    • 43mm Four-Piston Calipers
    • Vented Rotors
    • Pads
    • Mounting Brackets
    • Proportioning Valves
    • Dual Bowl Master Cylinder
    • Flex Hoses
    • Lines
    • Bearings & Seals
    • All hardware included
  • 1941-48 Ford Frame X-Member Mount Power Brake Pedal Assembly
    1941-48 Ford Frame X-Member Mount Power Brake Pedal Assembly
    x
                Use this bracket and pedal to install our brake booster/master cylinder (not included, sold separately) to the left frame rail (boxed or open channel) of your early Ford frame or one without its original "X" member. Bracket bolts to frame (slight  trimming may be required). Sturdy, steel pedal arm can easily be heated and bent to clear any obstacles your car may have. Round pedal pad (included) screws onto pedal to finish the installation.

    Kit includes zinc plated bracket, pedal, pedal pad and hardware.

    Will NOT work in conjunction with the factory clutch pedal. Intended for use with an Automatic Transmission.

  • 1935-40 Ford Frame X-Member Mount Power Brake Pedal Assembly
    1935-40 Ford Frame X-Member Mount Power Brake Pedal Assembly
    x
                Use this bracket and pedal to install our brake booster/master cylinder (not included, sold separately) to the left frame rail (boxed or open channel) of your early Ford frame or one without its original "X" member. Bracket bolts to frame (slight  trimming may be required). Sturdy, steel pedal arm can easily be heated and bent to clear any obstacles your car may have. Round pedal pad (included) screws onto pedal to finish the installation.

    Kit includes zinc plated bracket, pedal, pedal pad and hardware.

    Will NOT work in conjunction with the factory clutch pedal. Intended for use with an Automatic Transmission.

  • Universal Brake Pedal/7 Inch Power Booster/1 Inch Master Cylinder Unit
    Universal Brake Pedal/7 Inch Power Booster/1 Inch Master Cylinder Unit
    x
                
    • Unit mounts under floor
    • Bolt-on bracket to frame rail
    • Mounting bracket sets off frame rail 2" for clearance
    • 7" single diaphragm booster, 1" bore master cylinder, and 10-1/2" pedal assembly
    • For disc/drum and drum/drum applications
    • 1/2" & 9/16" IFF outlets on the master cylinder

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article, Brake System Selection.

  • Speedway 1955-57 Chevy Deluxe Front Disc Brake Kit
    Speedway 1955-57 Chevy Deluxe Front Disc Brake Kit
    x
                

    Just what's needed to update your classic Tri-Five Chevy! Eliminate those archaic ball bearings and gain first class stopping power all at once with this front disc brake conversion kit. Rotors and caliper brackets bolt onto your original spindles with no modification or machining required. Calipers mount to the front of the spindle.

    This disc brake kit will increase the total front track width by 1-3/4" (7/8” per side).

    • Uses 11" rotors and 1969-72 GM calipers (7/16"-20 inlets)
    • May not clear some 14" wheels
    • Bolts onto stock '55-'57 spindles with no machine work
    • Includes rubber brake hoses

    910-31949 Instructions (PDF)

  • Street Demon 1905 750 CFM Hand-Polished Aluminum Carburetor
    Street Demon 1905 750 CFM Hand-Polished Aluminum Carburetor
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2