Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"master cylinder bore size" Page 1 of 3

  • Wilwood Combination Remote Fill Master Cylinder Kit
    Wilwood Combination Remote Fill Master Cylinder Kit
    x
                

    Six different bore sizes and four different installation configurations are available in this master cylinder kit. Precision machined from high strength aluminum, this kit includes both small and large size reservoirs which can be mounted for more convenient service access. Standard mounting bolt hole configurations provide easy applications for racing and off road vehicles, specialty cars, recreation and industrial vehicles.

    Bore sizes available include: 5/8", 3/4", 7/8", 13/16", 1", 1-1/8".

    • Includes small and large reservoirs which can be direct or remote mounted
    • Aluminum cylinder with plastic reservoir tank
    • Mounting flange is a vertical pattern on a 2-1/4" on center
    • Master cylinder has a single 3/8-24 brake line outlet
    • The two side mount holes are 3" from center to center

    70174 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • US Brake Tri Reverse Mount Master Cylinder Pedal Assembly, 5.1:1
    US Brake Tri Reverse Mount Master Cylinder Pedal Assembly, 5.1:1
    x
                

    This Wilwood pedal/US Brake master cylinder assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall and away from engine heat. It features all aluminum frame and arm construction with steel pivots, mounting studs, and anti-skid pedal pads. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    • 5.1:1 pedal ratio 
    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction
    • Each master cylinder has a single 1/8" NPT outlet
    • Specify m/c bore sizes needed (3/4", 7/8", 1")

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • US Brake Tri Reverse Mount Master Cylinder Pedal Assembly Kit, 6.2:1
    US Brake Tri Reverse Mount Master Cylinder Pedal Assembly Kit, 6.2:1
    x
                

    This Wilwood pedal/US Brake master cylinder assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall and away from engine heat. It features all aluminum frame and arm construction with steel pivots, mounting studs, and anti-skid pedal pads. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    • 6.2:1 pedal ratio 
    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction
    • Each master cylinder has a single 1/8" NPT outlet
    • Specify m/c bore sizes needed (3/4", 7/8", 1")

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Dual Reverse-Mount Master Cylinder Pedal Kit
    Dual Reverse-Mount Master Cylinder Pedal Kit
    x
                

    This Wilwood pedal mounts two US Brake master cylinders with a bias balance bar and positions the master cylinders inside the firewall and away from engine heat. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable (at right) for quick on-track adjustments.

    • US Brake Master Cylinders
      • External return spring maintains positive pedal feel, prolongs pad life
      • Polished smooth bores
      • One-piece alumiunum construction

    6.25:1 pedal ratio. Each master cylinder has a single 1/8" NPT outlet. Specify m/c bore sizes.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • US Brake Swing Mount Dual Master Cylinder Pedal
    US Brake Swing Mount Dual Master Cylinder Pedal
    x
                

    This combo pairs a Wilwood pedal assembly with two US Brake master cylinders. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    Has a 7:1 pedal ratio. Specify m/c bore sizes in Comments box of your Shopping Cart at Checkout: 3/4", 7/8", or 1".

    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Electric Power Master Cylinder - Disc/Drum
    Electric Power Master Cylinder - Disc/Drum
    x
                

    These electrically boosted master cylinders are really slick. Rather than using bulky vacuum boosters to generate increased hydraulic force, they employ remote-mounted electric pumps and accumulators to build brake pressure.

    The compact and attractive aluminum master cylinder can easily be retro-fitted on the firewall of most American cars, or can be frame mounted if you have 5-1/4" of under-floor clearance.

    12 volt electric pump and accumulator assembly can be mounted out of sight on the frame or in the trunk. For disc/drum applications.

    104-10562 Instructions (PDF)

    Low pressure or return line is a 3/8" hose fitting, located on the driver's side of the master cylinder when mounted to the firewall.  

    The pumps feature 3/8"-24 IFF high pressure line from the master cylinder. A return or low pressure line is a 3/8" hose fitting. A 48" piece of return line is supplied with both kits.

    The master cylinder has slotted mounting holes with spacing that will accept a 3-1/16" to 3-7/16" on center mounting distance, and will accept both 3/8" and 10MM bolts. The reservoir is 10" long by 3" wide by 3" tall.

    The master cylinder and reservoir together measure 10" long by 3-1/4" wide by 5-1/4" tall. The pushrod h
  • Wilwood Forward Swing Dual Master Cylinder Brake Pedal
    Wilwood Forward Swing Dual Master Cylinder Brake Pedal
    x
                

    This popular pedal mounts two brake master cylinders with a bias balance bar. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    • The swing type pedal has a ratio of 7:1
    • Includes balance bar
    • This popular pedal mounts two brake master cylinders with a bias balance bar

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Wilwood Tandem Master Cylinders, 1-1/8 Inch Bore
    Wilwood Tandem Master Cylinders, 1-1/8 Inch Bore
    x
                

    Wilwood’s tandem chamber master cylinders represent the latest refinements in brake pressure actuation and fluid control. The exclusive Wilwood features incorporated in this innovative and unique new design make it the perfect choice for a wide range of custom manual or power brake applications.

    Each master cylinder is configured with full separation between the front and rear reservoir chambers and fluid outlets. There is a pressure access on both sides of the piston bore for right or left hand plumbing based on mount location. A total piston stroke of 1.10” is distributed at a 2:1 volume ratio between the primary and secondary chambers.

    Wilwood Master Cylinder Installation Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Wilwood Tandem Master Cylinders, 1 Inch Bore
    Wilwood Tandem Master Cylinders, 1 Inch Bore
    x
                Please view the product's page for more information
            
  • US Brake Dual Master Cylinder Floor Mount Pedal
    US Brake Dual Master Cylinder Floor Mount Pedal
    x
                

    This combo pairs a Wilwood floor mount pedal assembly with two US Brake master cylinders. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    US Brake Master Cylinders

    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction

    Has a 6:1 pedal ratio. Specify m/c bore sizes in Comments box of your Shopping Cart at Checkout: 3/4", 7/8", 1".

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Electric Power Master Cylinders - Disc/Disc
    Electric Power Master Cylinders - Disc/Disc
    x
                

    These electrically boosted master cylinders are really slick. Rather than using bulky vacuum boosters to generate increased hydraulic force, they employ remote-mounted electric pumps and accumulators to build brake pressure.

    The compact and attractive aluminum master cylinder can easily be retro-fitted on the firewall of most American cars, or can be frame mounted if you have 5-1/4" of under-floor clearance.

    12 volt electric pump and accumulator assembly can be mounted out of sight on the frame or in the trunk. Available for disc/disc or disc/drum applications.

    104-10564 Instructions (PDF)

    Low pressure or return line is a 3/8" hose fitting, located on the driver's side of the master cylinder when mounted to the firewall.  

    The pumps feature 3/8"-24 IFF high pressure line from the master cylinder. A return or low pressure line is a 3/8" hose fitting. A 48" piece of return line is supplied with both kits.

    The master cylinder has slotted mounting holes with spacing that will accept a 3-1/16" to 3-7/16" on center mounting distance, and will accept both 3/8" and 10MM bolts. The reservoir is 10" long by 3" wide by 3" tall.

    The master cylinder and reservoir together measure 10" long by 3-1/4" wide by 5-1/4" tall. The

  • Wilwood Universal Master Cylinder Rebuild Kits
    Wilwood Universal Master Cylinder Rebuild Kits
    x
                

    These rebuild kits fit Wilwood and Tilton universal master cylinders. Available bore sizes include: 5/8", 3/4", 7/8", 1", and 1-1/8".

    Tech Tip: The bigger the master cylinder, the more fluid you get... but you'll have less pressure at the caliper.

  • GM/Corvette Cast Iron Master Cylinder, 1 Inch Bore
    GM/Corvette Cast Iron Master Cylinder, 1 Inch Bore
    x
                

    Universal GM Corvette style cast iron master cylinder with a 1" bore size. Suitable for Disc/Drum applications. Includes a piston adapter that will allow for power or manual brake systems.

    Has 9/16" and 1/2" ports on both sides of the master cylinder.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Deluxe Chromed Aluminum Master Cylinder
    Deluxe Chromed Aluminum Master Cylinder
    x
                

    This aluminum master cylinder features a double adjustable proportioning valve, removable metering valve, stop light switch port and a larger fluid capacity. It is approximately the same size as the Corvette master cylinder but only weighs 5 lbs. 1" bore. 3/8"-24 IFF outlets. 

    910-31455 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Wilwood Compact Master Cylinder
    $79.99
    $85.99
    Product Rating: 4.83 Stars
    Wilwood Compact Master Cylinder
    x
                

    Wilwood’s Compact Combination Master Cylinders have been designed for limited space applications requiring the output capacity of a full size master cylinder. The ultra short 3.37”compact body provides 2.16” of additional clearance between the mounting flange and the fluid outlet. A full 1.12” of piston stroke meets or exceeds the stroke capacity of most full size cylinders. With 1/8” NPT fluid outlet port located at the top radius of the cylinder bore, reduces the chances for trapped air. The black E-Coated aluminum body resists corrosion and maintains a durable long lasting finish. 

    Includes a large and small reservoir, hose and hardware for remote mounting if required. Features a heavy internal return spring.

    835-260103 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Wilwood 260-2636 Clutch & Small Brake Master Cylinder, 5/8 Inch Bore
    Wilwood 260-2636 Clutch & Small Brake Master Cylinder, 5/8 Inch Bore
    x
                

    This popular, lightweight, compact design is used for clutch and small master cylinder requirements and is well known for its dependability. It incorporates an improved plastic screw-on filler cap which protects the fluid in the 1.4 ounce reservoir.

    • Includes fitting to accept 3/8"-24 inverted flare from 3/16" hard line
    • If AN-3 or AN-4 flex line is to be used, the following adapters will work:
      • 910318-3/8  (3/8"-24 to AN-3 Male Brake Fitting)
      • 6174030  (3/8"-24 Inverted Flare to AN-4 Fitting)

    External Dimensions (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • 1958-64 Chevy Full-size Car Brake Booster Combo, Disc/Drum
    1958-64 Chevy Full-size Car Brake Booster Combo, Disc/Drum
    x
                

    When you put modern disc brakes on the front of your 1958-1964 Chevy full-size car (Bel-Air, Biscayne, Impala), you should update the master cylinder as well. Stock 4-wheel drum master cylinders do not have the capacity to supply the proper amount of pressure for front disc brakes. For best results, we recommend using this simple, bolt-on master cylinder booster kit on all front disc brake conversions.

    • 8" dual diaphragm booster
    • 1" bore master cylinder
    • GM style proportioning/metering combination valve
    • Master cylinder has outlets on both sides for ease of plumbing
    • Includes plugs for unused outlets on opposite side of master cylinder

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • 1955-64 Chevy Full-size Car Brake Booster Combo, Disc/Disc, Drum/Drum
    1955-64 Chevy Full-size Car Brake Booster Combo, Disc/Disc, Drum/Drum
    x
                

    When you put modern disc brakes on your 1955-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series), you should update the master cylinder as well. Stock 4-wheel drum master cylinders do not have the capacity to supply the proper amount of pressure for disc brakes. For best results, we recommend using this simple, bolt-on master cylinder booster kit on all 4-wheel disc brake conversions or as a power brake upgrade for 4-wheel drum brake applications.

    • 8" dual diaphragm booster
    • 1" bore master cylinder
    • Adjustable proportioning valve for rear brake line
    • Master cylinder has outlets on both sides for ease of plumbing
    • 1/2"-20 and 9/16"-18 outlets

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Wilwood 260-7563 Tandem Remote Fill Master Cylinder
    Wilwood 260-7563 Tandem Remote Fill Master Cylinder
    x
                

    Tandem remote master cylinders provide one of the safest ways to actuate four wheel or dual caliper axle brake systems. This versatile, lightweight and easily adapted master cylinder provides single pushrod activation of two separate brake fluid circuits. By completely isolating the fluid reservoirs and circuits, the front and rear brakes are able to operate independently of each other and provide a safety net should any one side of the system become inoperable. Shipped complete with the master cylinder and all necessary hardware including 30 inches of hose that can be cut to the desired length for remote mounting of the two 4 ounce fluid reservoirs. 

    • Can be bolted directly to Wilwood single mount pedals
    • 50/50 front/rear brake output from a 1.00" bore with 1.10" stroke
    • Great match for Wilwood's Bolt-On-Disc Brake Kit systems configured from OE components
    • Reservoirs can be either remote or master cylinder mounted

    Tandem Remote Fill Master Cylinder Installation Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • AFCO Clutch Master Cylinder - 3/4 Bore
    AFCO Clutch Master Cylinder - 3/4 Bore
    x
                

    Small AFCO master cylinder for clutch applications.

    • Lightweight, space-saving alternative to full size master cylinders
    • Fits popluar clutch and small brake applications
    • 3/4" Bore
    • 3/8"-24 inverted flare fitting included
    • 1.4 oz. reservoir

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Speedway Clutch Master Cylinder - 3/4 Bore
    Speedway Clutch Master Cylinder - 3/4 Bore
    x
                

    Small Speedway master cylinder for clutch applications.

    • Lightweight, space-saving alternative to full size master cylinders
    • Fits popluar clutch and small brake applications
    • 3/4" Bore
    • 3/8"-24 inverted flare fitting included
    • 1.4 oz. reservoir

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Garage Sale - GM/Corvette Cast Iron Master Cylinder, 1 Inch Bore
    Garage Sale
    Garage Sale - GM/Corvette Cast Iron Master Cylinder, 1 Inch Bore
    x
                Please view the product's page for more information
            
  • Garage Sale - Wilwood Universal Master Cylinder Rebuild Piston Only
    Garage Sale
    Garage Sale - Wilwood Universal Master Cylinder Rebuild Piston Only
    x
                

    These rebuild kits fit Wilwood and Tilton universal master cylinders. Available bore size 1-1/8".

    Tech Tip: The bigger the master cylinder, the more fluid you get... but you'll have less pressure at the caliper.

     

    This piston is garage sale priced because we don't usually offer the piston separately. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - Aluminum Master Cylinder w/ Stainless Bore
    Garage Sale
    Garage Sale - Aluminum Master Cylinder w/ Stainless Bore
    x
                Please view the product's page for more information
            
  • Garage Sale - AFCO Integral Reservoir Master Cylinder, .875 Inch Bore
    Garage Sale
    Garage Sale - AFCO Integral Reservoir Master Cylinder, .875 Inch Bore
    x
                Please view the product's page for more information
            
  • 1937-39 Chevy Car Master Cylinder & Frame Rail Mount
    1937-39 Chevy Car Master Cylinder & Frame Rail Mount
    x
                

    The ideal combination for a clean and simple 1937-1939 Chevy passenger car brake system. The 1" bore master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, steel pedal arm that can be easily modified for driver comfort and hardware.

    916-31939 Instructions (PDF)

  • Garage Sale -  Dual Feed Master Cylinder w/ Stainless Sleeve
    Garage Sale
    Garage Sale - Dual Feed Master Cylinder w/ Stainless Sleeve
    x
                Please view the product's page for more information
            
  • 1935-1940 Ford Frame Mount Master Cylinder
    1935-1940 Ford Frame Mount Master Cylinder
    x
                The ideal combination for a clean and simple  1935-1940 Ford. Bracket mounts the master cylinder under the floor onto  the frame rail. The bracket can be bolted or welded to the frame (boxed  or stock). The included 1" bore master cylinder is suitable for 4-wheel  disc or disc/drum brake setups.

    Kit includes a dual feed master cylinder, frame bracket, steel pedal arm that can be easily modified for driver comfort. Includes hardware.
  • Garage Sale - 1 Inch Bore Dual Feed Master Cylinder With SS Sleeve
    Garage Sale
    Garage Sale - 1 Inch Bore Dual Feed Master Cylinder With SS Sleeve
    x
                

    Brake fluid can ruin your master cylinder in just a few years. Stop the problem by using a stainless steel sleeved master cylinder. Our new sleeved dual feed master cylinder will work with most disc/drum combinations.

    • No more pitting in the bore
    • 1" bore
    • Popular 3/8"-24 inverted flare ports
    • 3/16" brake line will screw right in
    These master cylinders are garage sale priced because they have been installed, run and returned. Do not include pushrods.  They may be painted.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 
  • Garage Sale - 1 Inch Bore Dual Feed Master Cylinder With SS Sleeve
    Garage Sale
    Garage Sale - 1 Inch Bore Dual Feed Master Cylinder With SS Sleeve
    x
                

    Brake fluid can ruin your master cylinder in just a few years. Stop the problem by using a stainless steel sleeved master cylinder. Our new sleeved dual feed master cylinder will work with most disc/drum combinations.

    • No more pitting in the bore
    • 1" bore
    • Popular 3/8"-24 inverted flare ports
    • 3/16" brake line will screw right in
    These master cylinders are garage sale priced because they have been installed, run and returned. Do not include pushrods.  They may be painted.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 
  • Garage Sale - 1 Inch Bore Dual Feed Master Cylinder With SS Sleeve
    Garage Sale
    Garage Sale - 1 Inch Bore Dual Feed Master Cylinder With SS Sleeve
    x
                

    Brake fluid can ruin your master cylinder in just a few years. Stop the problem by using a stainless steel sleeved master cylinder. Our new sleeved dual feed master cylinder will work with most disc/drum combinations.

    • No more pitting in the bore
    • 1" bore
    • Popular 3/8"-24 inverted flare ports
    • 3/16" brake line will screw right in
    These master cylinders are garage sale priced because they have been installed, run and returned. Do not include pushrods.  They may be painted.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 
  • Garage Sale - 1 Inch Bore Dual Feed Master Cylinder With SS Sleeve
    Garage Sale
    Garage Sale - 1 Inch Bore Dual Feed Master Cylinder With SS Sleeve
    x
                

    Brake fluid can ruin your master cylinder in just a few years. Stop the problem by using a stainless steel sleeved master cylinder. Our new sleeved dual feed master cylinder will work with most disc/drum combinations.

    • No more pitting in the bore
    • 1" bore
    • Popular 3/8"-24 inverted flare ports
    • 3/16" brake line will screw right in
    These master cylinders are garage sale priced because they have been installed, run and returned. Do not include pushrods.  They may be painted.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 
  • Garage Sale - 1955-57 Chevy Car Disc/Disc Brake Booster Master Cylinder Combo
    Garage Sale
    Garage Sale - 1955-57 Chevy Car Disc/Disc Brake Booster Master Cylinder Combo
    x
                Please view the product's page for more information
            
  • Garage Sale - Chrome Power Brakes Master Cylinder
    Garage Sale
    Garage Sale - Chrome Power Brakes Master Cylinder
    x
                

    This master cylinder is garage sale priced because it has been installed and returned.  This one has had fluid in it. 

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

    This beautiful chrome master cylinder is highly versitile featuring outlets on both sides and a 1" bore. Has 3/8"-24 IFF outlets 

    For use with power brake boosters - NOT for use with manual brake systems. Suitable for use with front disc/rear drum brake systems.

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection 

  • Garage Sale - Chrome Master Cylinder - 1" Bore
    Garage Sale
    Garage Sale - Chrome Master Cylinder - 1" Bore
    x
                

    This beautiful chrome master cylinder is highly versitile featuring outlets on both sides and a 1" bore. Has 3/8"-24 IFF outlets.

     

    This Master Cylinder is Garage Sale priced because the chrome is not the best.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Garage Sale - Aluminum 1 Inch Bore Master Cylinder - S.S. Sleeve
    Garage Sale
    Garage Sale - Aluminum 1 Inch Bore Master Cylinder - S.S. Sleeve
    x
                

    Brake fluid can ruin your master cylinder in just a few years. Stop the problem by using a stainless steel sleeved master cylinder. Our sleeved GM-style aluminum master cylinder provides a weight savings and longer service life. It has 2 mounting holes on a 3-1/4" center for 3/8" or 10mm bolts.

    • 1" stainless steel sleeved bore
    • Unpolished aluminum
    • Height from center line to the top most point on the retaining bar is 3.5"
    • 3/8"-24 inverted flare ports on each side
    • Deep piston design for manual or power brakes 
    • Pushrod NOT included
    These master cylinders are garage sale priced because they have been installed and returned.  These have had fluid in them.
     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS


     
  • Garage Sale - Speedway Clutch Master Cylinder - 3/4 Bore
    Garage Sale
    Garage Sale - Speedway Clutch Master Cylinder - 3/4 Bore
    x
                

    Small Speedway master cylinder for clutch applications.

    • Lightweight, space-saving alternative to full size master cylinders
    • Fits popluar clutch and small brake applications
    • 3/4" Bore
    • 3/8"-24 inverted flare fitting included
    • 1.4 oz. reservoir

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

     

    This master cylinder is garage sale priced because it is missing the cap gasket. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • 1964-1974 GM Disc Brake Booster Conversion Kit Combo
    1964-1974 GM Disc Brake Booster Conversion Kit Combo
    x
                

    When you put modern disc brakes on the front of your 1964-1974 GM midsize car, you should update the master cylinder as well. Why not go to this simple bolt on power brake system? The 1" bore Corvette-style master cylinder features two different outlet sizes to fit all GM applications. 

    • 1" bore master cylinder with 1/2"-20 and 9/16"-18 outlet
    • Disc brake conversion kit
    • 9" Slimline Single Diaphragm
    • Fits: 1964-1974 GM midsize car
    • Includes:
      • booster
      • master cylinder
      • proportioning valve
      • bracket
      • pedal rod extension and clevis

    *Please refer to "Application" tab for corresponding vehicle fit.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Garage Sale - Wilwood Tandem Master Cylinder 1-1/8 Inch Bore
    Garage Sale
    Garage Sale - Wilwood Tandem Master Cylinder 1-1/8 Inch Bore
    x
                Please view the product's page for more information
            
  • GARAGE SALE - ALUMINUM 1 INCH BORE MASTER CYLINDER WITH SS SLEEVE
    Garage Sale
    GARAGE SALE - ALUMINUM 1 INCH BORE MASTER CYLINDER WITH SS SLEEVE
    x
                

    Brake fluid can ruin your master cylinder in just a few years. Stop the problem by using a stainless steel sleeved master cylinder. Our sleeved GM-style aluminum master cylinder provides a weight savings and longer service life. It has 2 mounting holes on a 3-1/4" center for 3/8" or 10mm bolts.

    • 1" stainless steel sleeved bore
    • Unpolished aluminum
    • Height from center line to the top most point on the retaining bar is 3.5"
    • 3/8"-24 inverted flare ports on each side
    • Deep piston design for manual or power brakes 
    • Pushrod NOT included
    These master cylinders are garage sale priced because they have been installed and returned.  These have had fluid in them.
     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

Goto Previous PagePrevious Page
1 2 3