Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"manual rack conversion" Page 1 of 2

  • Unisteer 8001110-01 64-66 Mustang Manual Rack & Pinion Conversion Kit
    Unisteer 8001110-01 64-66 Mustang Manual Rack & Pinion Conversion Kit
    x
                

    This rack & pinion conversion kit will finally give your classic 64'-66 Mustang the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety.The custom steering gear is engineered to match the stock suspension, and has NO BUMP STEER. Installation is extremely simple, since the unit is a true bolt-on.

    Each kit includes everything needed to do a complete installation on a Mustang with the original column.

    910-32301 Instructions (PDF)

     

  • Unisteer 8001120-01 1967 Mustang Manual Rack & Pinion Conversion Kit
    Unisteer 8001120-01 1967 Mustang Manual Rack & Pinion Conversion Kit
    x
                

    This rack & pinion conversion kit will finally give your classic 1967 Mustang the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety. The custom steering gear is engineered to match the stock suspension, and has NO BUMP STEER. Installation is extremely simple, since the unit is a true bolt-on.

    Each kit includes everything needed to do a complete installation on a Mustang with the original column.

     

  • Unisteer 8000770-01 1967-74 GM Manual Rack & Pinion Conversion Kit
    Unisteer 8000770-01 1967-74 GM Manual Rack & Pinion Conversion Kit
    x
                

    This rack & pinion conversion kit will finally give your classic 1967-69 Camaro or Firebird the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety. This rack is specifically designed and built for the Camaro so that it matches the factory steering geometry. The result is very little bump steer!

    The rack comes mounted on the brackets which makes installation a breeze. The unit mounts to the rear of the cross member, bolting to the lower stock control arm bolts. The outer tie rod ends are bolted to the stock steering arms. No fabrication required!

    Small, compact, offers maximum ground clearance, and can drop up to 65 lbs. off the stock front end.

    Kit includes:

    • Manual Rack & Pinion
    • Mounting Bracket
    • Outer Tie Rods
    • Hardware
    • Installation Instruction Sheet
    Fits
    • 1967-69 Camaro/Firebird
    • 1968-74 Nova X-Body 
    Instruction Manual (PDF)
  • Unisteer 8001090-01 68-70 Mustang Manual Rack & Pinion Conversion Kit
    Unisteer 8001090-01 68-70 Mustang Manual Rack & Pinion Conversion Kit
    x
                

    This rack & pinion conversion kit will finally give your classic 1968-70 Mustang the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety. The custom steering gear is engineered to match the stock suspension, and has NO BUMP STEER. Installation is extremely simple, since the unit is a true bolt-on.

    Each kit includes everything needed to do a complete installation on a Mustang with the original column.

  • Unisteer 8000930-01 1962-1967 Chevy II/Nova Manual Rack & Pinion Kit
    Unisteer 8000930-01 1962-1967 Chevy II/Nova Manual Rack & Pinion Kit
    x
                

    These rack & pinion conversion kits will finally give your 62'-67' Chevy II or Nova the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety. The manual rack & pinion has been modified to match the front suspension of the Chevy II/Nova, the resulting rack & pinion is geometrically correct offering no or negligible bump steer.

    Installation is easy, the rack & pinion comes mounted to its custom mounting bracket that bolts up to the existing engine mounts. No welding or cutting involved!

    Kit includes:

    • Manual Rack & Pinion
    • Black Powdercoated Mounting Bracket
    • Steering Arms
    • Tie Rod Ends

     

  • Speedway Mustang II Crossmember for 1947-54 Chevy Pickup Frame, Kit
    Speedway Mustang II Crossmember for 1947-54 Chevy Pickup Frame, Kit
    x
                Please view the product's page for more information
            
  • Speedway 1955-1959 Chevy Truck Crossmember
    Speedway 1955-1959 Chevy Truck Crossmember
    x
                Please view the product's page for more information
            
  • Speedway 1953-1956 Ford F-100 Truck Mustang II Crossmember
    Speedway 1953-1956 Ford F-100 Truck Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • 1948-1952 Ford Truck Speedway Deluxe Mustang II Crossmember
    1948-1952 Ford Truck Speedway Deluxe Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • Speedway Mustang II Crossmember-1937-39 Chevy Pickup Frame, Kit-Deluxe
    Speedway Mustang II Crossmember-1937-39 Chevy Pickup Frame, Kit-Deluxe
    x
                

    These Speedway Mustang IFS kits for 1937-39 Chevy Pickups are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1937-1939 Chevy Pickup frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get a "

  • Speedway 1949-1954 Chevy Speedway Mustang II Deluxe Steel Crossmember
    Speedway 1949-1954 Chevy Speedway Mustang II Deluxe Steel Crossmember
    x
                

    These Speedway Mustang IFS kits for 1949-1954 Chevy passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1949-1954 Chevy car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get a

  • Speedway Mustang II Crossmember Kit-1940-1946 Chevy Pickup Frame-DLX
    Speedway Mustang II Crossmember Kit-1940-1946 Chevy Pickup Frame-DLX
    x
                

    These Speedway Mustang IFS kits for 1940-46 Chevy Pickups are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1940-1946 Chevy Pickup frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get

  • Heidts Mustang II Crossmember for 1948-1952 Ford Pick-Up Frame, Weld-On Kit
    Heidts Mustang II Crossmember for 1948-1952 Ford Pick-Up Frame, Weld-On Kit
    x
                Please view the product's page for more information
            
  • Heidts 1937-39 Chevy Truck Econo Mustang II Crossmember
    Heidts 1937-39 Chevy Truck Econo Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • Heidts 1947-54 Chevy Truck Econo Mustang II Crossmember
    Heidts 1947-54 Chevy Truck Econo Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • 37-48 Chevy Car Crossmember
    $299.99
    Product Rating: 4.00 Stars
    37-48 Chevy Car Crossmember
    x
                

    These Speedway Mustang IFS kits for 1937-1948 Chevy passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are all the special, hard-to-make brackets and mounts you will need to complete the installation, plus illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1937-1948 Chevy car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers

  • Heidts Mustang II Crossmember for 1935-40 Ford Frame, Weld-On Assembly
    Heidts Mustang II Crossmember for 1935-40 Ford Frame, Weld-On Assembly
    x
                Please view the product's page for more information
            
  • Heidts Mustang II Crossmember for 1949-54 Chevy Car Frame, Weld-On Kit
    Heidts Mustang II Crossmember for 1949-54 Chevy Car Frame, Weld-On Kit
    x
                Please view the product's page for more information
            
  • Heidts Mustang II Crossmember for 1964-1970 Ford Mustang Frame, Weld-On Kit
    Heidts Mustang II Crossmember for 1964-1970 Ford Mustang Frame, Weld-On Kit
    x
                Please view the product's page for more information
            
  • Unisteer 8010540-01 1967-74 GM Power Rack & Pinion Kit
    Unisteer 8010540-01 1967-74 GM Power Rack & Pinion Kit
    x
                

    This rack & pinion conversion kit from Unisteer will give your Nova the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety.

    The mounting bracket attaches to the bottom two control arm bolts on the rear of the crossmember. To install, simply remove the existing bolts and replace with the provided longer bolts, bolting the rack up into position. Then unbolt the stock steering arms and replace them with the new steering arms provided and attach the provided outer tie-rod ends, and that is it.

    • Matches stock steering geometry - little to no bump steer
    • Complete bolt on kit - no welding or chassis modification required
    • Works with both big block and small block engines
    • Kit comes standard in black powder coat
    • Works with factory steering pump (new lines required, see Notes)

    Power racks use the 17mm DD spline.  Will work with both B/B and S/B engines. 

    Fits

     

    • 1967-69 Camaro
    • 1968-74 Nova X-Body 

     

    Instructions (PDF)

  • Unisteer 8010740-01 1968-72 Chevelle Power Rack & Pinion Kit w/ Pump
    Unisteer 8010740-01 1968-72 Chevelle Power Rack & Pinion Kit w/ Pump
    x
                

    This rack & pinion conversion kit from Unisteer will give your 1968-1972 Chevelle the ease of steering and road feel modern cars have. Precisely engineered to bolt in without sacrificing steering geometry or safety.

    Kit includes the power rack, mounting bracket, power steering pump kit with a clip-on resevoir for a long water pump, and steering shaft kit designed for a factory steering column as well as all the necessary hardware to complete the installation. The kit features a black powder coated heavy-duty bracket that eliminates any twisting or flexing present in other kits.

    910-32309 Instructions (PDF)

  • 1968-74 Mopar B Body Rack and Pinion Kit - B/B Engine
    1968-74 Mopar B Body Rack and Pinion Kit - B/B Engine
    x
                

    You've spent a lot of money fixing up your classic Mopar, and it would be silly to scrimp on the steering now. These power rack and pinion conversion kits will give you better feel and control than the original ever had, plus it's easy to install.

    Kit features all of the high quality components needed to transform your Mopar's steering.  Includes:

    • Mounting Bracket
    • Mounting Hardware
    • Tie Rod Ends
    • Power Steering Pump Kit
    • Steering Shaft
    Instructions (PDF)
  • 1970-74 Mopar E Body Rack and Pinion Kit - B/B Engine
    1970-74 Mopar E Body Rack and Pinion Kit - B/B Engine
    x
                

    You've spent a lot of money fixing up your classic Mopar, so it would be silly to scrimp on the steering now. These power rack and pinion conversion kits will give you better feel and control than the original ever had, plus it's easy to install.

    Kit features all of the high quality components needed to transform your Mopar's steering.  Includes:

    • Mounting Bracket
    • Mounting Hardware
    • Tie Rod Ends
    • Power Steering Pump Kit
    • Steering Shaft
    Instructions (PDF)
  • 1970-1974 Mopar E Body Rack and Pinion Kit - Small Block Engine
    1970-1974 Mopar E Body Rack and Pinion Kit - Small Block Engine
    x
                

    You've spent a lot of money fixing up your classic Mopar, and it would be silly to scrimp on the steering now. These power rack and pinion conversion kits will give you better feel and control than the original ever had, plus it's easy to install.

    Kit features all of the high quality components needed to transform your Mopar's steering.  Includes:

    • Mounting Bracket
    • Mounting Hardware
    • Tie Rod Ends
    • Power Steering Pump Kit
    • Steering Shaft
    Instructions (PDF)
  • 1968-74 Mopar B Body Rack and Pinion Kit - Small Block Engine
    1968-74 Mopar B Body Rack and Pinion Kit - Small Block Engine
    x
                

    You've spent a lot of money fixing up your classic Mopar, and it would be silly to scrimp on the steering now. These power rack and pinion conversion kits will give you better feel and control than the original ever had, plus it's easy to install.

    Kit features all of the high quality components needed to transform your Mopar's steering.  Includes:

    • Mounting Bracket
    • Mounting Hardware
    • Tie Rod Ends
    • Power Steering Pump Kit
    • Steering Shaft
    Instructions (PDF)
  • Heidts Universal 56-1/2 Econo Crossmember
    Heidts Universal 56-1/2 Econo Crossmember
    x
                Please view the product's page for more information
            
  • Unisteer 8010400-01 1955-57 Chevy Power Rack & Pinion
    Unisteer 8010400-01 1955-57 Chevy Power Rack & Pinion
    x
                

    Finally a bolt-on power rack and pinion for 1955-57 Chevy cars. Simply remove the original steering box, idler arm and tie rod assembly and bolt this unit back in using the original mounting holes. Includes tie rod ends, special steering arms, and a pair of banjo fittings to adapt to AN6 fluid lines. Can be used with most GM steering pumps.

    1. This item must be used with OEM style spindles. It WILL NOT work with dropped spindles.
    2. Designed for use with S/B Chevy 265-400 c.i. V-8.
    3. Must use chassis headers and a stock type pan sump for clearance.
    4. Steering U-joint 910-32255 is required (17mm).                                                   

    910-32246 Instructions (PDF)                                     &n

  • Garage Sale - Unisteer 8000770-01 1967-74 GM Manual Rack & Pinion Conversion Kit
    Garage Sale
    Garage Sale - Unisteer 8000770-01 1967-74 GM Manual Rack & Pinion Conversion Kit
    x
                

    This rack is garage sale priced because it has been bolted in and returned.  This one is missing the installation hardware.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

    This rack & pinion conversion kit will finally give your classic 1967-69 Camaro or Firebird the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety. This rack is specifically designed and built for the Camaro so that it matches the factory steering geometry. The result is very little bump steer!

    The rack comes mounted on the brackets which makes installation a breeze. The unit mounts to the rear of the cross member, bolting to the lower stock control arm bolts. The outer tie rod ends are bolted to the stock steering arms. No fabrication required!

    Small, compact, offers maximum ground

  • Speedway Mustang II Crossmember-Ford Frame-35-40 Car-35-41 Pickup-DLX
    Speedway Mustang II Crossmember-Ford Frame-35-40 Car-35-41 Pickup-DLX
    x
                Please view the product's page for more information
            
  • Garage Sale-Speedway Mustang II Crossmember-34-35 Chevy-STD-Economy
    Garage Sale
    Garage Sale-Speedway Mustang II Crossmember-34-35 Chevy-STD-Economy
    x
                

    These Speedway Mustang IFS kits for 1934-1935 Chevy passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are all the special, hard-to-make brackets and mounts you will need to complete the installation, plus illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1934-1935 Chevy Standard car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with manual rack and pinion ONLY

    Choose from the crossmembers bel

  • Garage Sale - Speedway Mustang II Crossmember, 1934-36 Chevy-Economy
    Garage Sale
    Garage Sale - Speedway Mustang II Crossmember, 1934-36 Chevy-Economy
    x
                

    These Speedway Mustang IFS kits for 1934-1936 Chevy Master passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are all the special, hard-to-make brackets and mounts you will need to complete the installation, plus illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1934-1936 Chevy Master car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with manual rack and pinion ONLY

    Choose from the crossmemb

  • Garage Sale - Speedway Mustang II Crossmember for 1934-35 Chevy, STD Frame
    Garage Sale
    Garage Sale - Speedway Mustang II Crossmember for 1934-35 Chevy, STD Frame
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2