Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Brand Banners -  Mallory Ignition
Searched For:

"mallory ignition wire" Page 1 of 1

  • Mallory Ignition 700 Ballast Resistor, .75-1.50 Ohm
    Mallory Ignition 700 Ballast Resistor, .75-1.50 Ohm
    x
                

    Stabilize coil current and prolong point life with Mallory ballast resistors. Computer-wound to ensure resistance value. Premium ceramic bodies provide maximum durability and superior heat transfer. Recommended when a new coil is installed.

    Mallory Unilite distributors include self-contained modules that require a ballast resistor, loom resistance wire, or internally resisted coil (ex. when using HyFire CD Ignitions). Using a heavy duty porcelain resistor and threaded terminal connectors, this resistor is rated at 200 watts and 0.75 (cold) – 1.5 (hot) ohms.

  • Mallory Ignition 5072101 32-41 Flathead 3 Bolt Electronic Distributor
    Mallory Ignition 5072101 32-41 Flathead 3 Bolt Electronic Distributor
    x
                

    Mallory Magnetic Breakerless Electronic Distributor for 1932-1941 Ford Flathead V8 with the 3-bolt mount. Includes Mallory Super-Duty cap (points style) and rotor with brass terminals.

    • Adjustable mechanical advance
    • Self-lubricating bushings provide years of trouble-free service
    • Easy 3-wire hookup
    • Does not require an external control box
    • For 12 volt systems only

    500-5071601 Instructions (PDF)

     

    Note: This distributor requires 1.4 ohms of coil resistance. If you are using a coil with less than 1.4 ohms, you must us a ballast resistor that will achieve the required 1.4 ohm total resistance. If you are using coil # 447-45001, no resistor will be required.

  • Mallory Ignition 609 Replacement Magnetic Breakerless Module
    Mallory Ignition 609 Replacement Magnetic Breakerless Module
    x
                

    Mallory's Magnetic Breakerless Ignition Modules are self contained module assemblies which have no moving parts to wear out. Using Mallory's time tested breakerless ignition circuit, combined with modern surface mount Thermal-Cladé construction, these ignition modules can drive both OEM and high performance ignition coils. Hookup is as easy as a three wire connection.

     

  • Mallory Ignition 3738701 Ford Y-Block Electronic Distributor
    Mallory Ignition 3738701 Ford Y-Block Electronic Distributor
    x
                

    These Mallory Ford Y-Block distributors are triggered by the Unilite photo-optic infrared LED system. Gain improved combustion efficiency and economy, increased spark plug life & cold weather starting, and maintenance free operation.

    Fits 1955-1964 Ford 256, 272, 292, and 312 Y block engines and 1955-1958 Linclon/Mercury/Edsel 341-368 Y block engines.

    • Adjustable mechanical advance
    • Self-lubricating bushings provide years of trouble-free service
    • Includes Super-Duty cap & rotor with brass terminals
    • Easy 3-wire installation
    • No external ignition control box required

    Mallory Ford Y-Block Unilite Distributor Instructions 500-3738701 (PDF)

  • Mallory Ignition 4518001 49-62 Chevy 6-Cylinder Electronic Distributor
    Mallory Ignition 4518001 49-62 Chevy 6-Cylinder Electronic Distributor
    x
                

    Mallory Unilite electronic distributors feature state of the art electronics for a high output ignition. Never set points on your Chevy Six again! Fits 1949-1962 Chevy 216, 235, and 261 engines (12 volt only).

    • Adjustable mechanical advance
    • Self-lubricating bushings provide years of trouble-free service
    • Includes Super-Duty cap & rotor with brass terminals
    • Easy 3-wire hook up
    • External ignition control box not required

    500-4518001 Instructions (PDF)

  • Mallory Ignition 5072001 42-48 Flathead 2 Bolt Electronic Distributor
    Mallory Ignition 5072001 42-48 Flathead 2 Bolt Electronic Distributor
    x
                Mallory Magnetic Breakerless Electronic Distributor for 1942-1948 Ford  Flathead V8 with the 2-bolt mount. Easy 3-wire hookup. Adjustable mechanical  advance. Includes Mallory Super-Duty cap (Points Style) and rotor with brass  terminals. 

    For 12 volt systems only.


    500-5071501 Instructions (PDF)

    Note: This distributor requires 1.4 ohms of coil resistance. If you are using a coil with less than 1.4 ohms, you must use a ballast resistor that will achieve the required 1.4 ohm total resistance. If you are using coil #447-45001, no resistor will be required.

  • Mallory Ignition 5027501 1949-53 Ford Flathead Electronic Distributor
    Mallory Ignition 5027501 1949-53 Ford Flathead Electronic Distributor
    x
                

    Tried and true Mallory electronic distributor for your 1949-1953 Flathead Ford. Features magnetic breakerless ignition technology for greatly improved accuracy versus points-style distributors. For 12 volt systems only.

    • Easy 3-wire hookup
    • Adjustable mechanical advance
    • Self-lubricating bushings provide years of trouble-free service
    • Includes Mallory Super-Duty Cap and Rotor with brass terminals
    • Distributor drive gear not included (sold separately)

    Note: This distributor requires 1.4 ohms of coil resistance. If you are using a coil with less than 1.4 ohms, you must use a ballast resistor that will achieve the required 1.4 ohm total resistance. If you are using coil # 447-45001, no resistor will be required.

    500-5027501 Instructions (PDF)

  • 1932-48 Ford Flathead 3 Bolt Electronic Distributor
    1932-48 Ford Flathead 3 Bolt Electronic Distributor
    x
                Speedway Motors offers this billet aluminum electronic distributor for the fabulous '32-'41 Flathead Ford V8 with the 3-bolt mount. This distributor is a "ready-to-run" unit that does not require a control box. 

    We suggest a 12v coil 447-45001 (chrome) or 447-45011 (black) to be used with this distributor. We also suggest our spark plug wire set 910-64200.

    910-8353 Instructions (PDF)

  • MSD 8203 Blaster 2 Ignition Coil w/ Resistor
    MSD 8203 Blaster 2 Ignition Coil w/ Resistor
    x
                

    If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD ignition, the Blaster Coil line is the right choice. Special 100:1 windings, kept cool in an oil filled metal canister, are used to provide maximum build-up of voltage.  The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. Can be used with a stock ignition, Blaster Ignition, or MSD 5, 6 or 7 Ignition Control.

    The 0.8 ohm ballast resistor must be used with stock points ignition and Mallory Unilite applications. Includes MSD Power Tower top.

    • Improved output coil for stock points or electronic ignitions, Blaster Ignition, or MSD 5, 6, and 7 Series
    • Supplied with two plug wire boots, terminals, and jumper wire
    • 100:1 turns ratio and lower primary resistance produce high voltage output
    • MSD Red metal canister is filled with a premium grade oil for cooling

    MSD Blaster 2 Ignition Installation Instructions (PDF)

  • VMAC Racing VTAC Tachometer
    $429.99
    Product Rating: 4.00 Stars
    VMAC Racing VTAC Tachometer
    x
                

    The versatile VTAC from VMAC Racing records two high and two low readings per lap. It will display engine RPM and lap number while on the track with up to a 100 lap recall, and after the race it will recall best lap with a push of the button. Plus, the tach is lighted, so it's great for night use. Easily removed from car at the car wash or into a back up car. Works with 4, 6 or 8 cylinder engines with magnetos or standard ignitions. Comes with instructions, mounting bracket and wire loom for easy installation.

    • Records 2 high & 2 low RPM per lap up to 100 laps
    • Push button recall - high RPM & best lap (the lap with your highest high RPMs & highest low RPMs)
    • Displays RPM while racing
    • Use for 4, 6 & 8 cylinders, easy on-screen selection
    • Use for any ignition, either magneto or distributor
    • Use with all major brands - MSD, Mallory, Vertex, Mallory Sprint Mag, etc.
    • For all classes of Sprint Cars, Dirt Late Models, Silver Crowns, Midgets, Modified, MiniSprints, Stock Cars
    • For all oval track racing, dirt or pavement

    VTAC Installation Instructions (PDF)

  • Garage Sale - Mallory CT Pro Digital Ignition Box
    Garage Sale
    Garage Sale - Mallory CT Pro Digital Ignition Box
    x
                Please view the product's page for more information
            
  • Garage Sale - Mallory Ignition 5072001 42-48 Flathead 2 Bolt Electronic Distributor
    Garage Sale
    Garage Sale - Mallory Ignition 5072001 42-48 Flathead 2 Bolt Electronic Distributor
    x
                Please view the product's page for more information
            
  • Garage Sale - Mallory 7mm Spark Plug Wire Terminal Kit
    Garage Sale
    Garage Sale - Mallory 7mm Spark Plug Wire Terminal Kit
    x
                

    Set 10. 

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - 1932-41 3-Bolt Mount Mallory Ignition, Electric
    Garage Sale
    Garage Sale - 1932-41 3-Bolt Mount Mallory Ignition, Electric
    x
                

    1932-1941 3-bolt mount electronic Mallory ignitions. 12 volt.

    Note:  This distributor requires 1.4 ohms of coil resistance.  If you are using a coil with less than 1.4 ohms, you must us a ballast resistor that will achieve the required 1.4 ohm total resistance.  If you are using coil # 447-45001, no resistor will be required.

     

    This distributor is garage sale priced because it is missing the distributor wiring harness.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - Mallory Ignition 5072001 42-48 Flathead 2 Bolt Electronic Distributor
    Garage Sale
    Garage Sale - Mallory Ignition 5072001 42-48 Flathead 2 Bolt Electronic Distributor
    x
                Please view the product's page for more information