Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"mahle forged pistons" Page 1 of 1

  • MAHLE Small Block Chevy 305 PowerPak Pistons
    MAHLE Small Block Chevy 305 PowerPak Pistons
    x
                

    Mahle PowerPak pistons are a race proven lightweight forged design that are complete with rings, wrist pins, and locks. They are also completely phosphate coated plus feature an anti-friction Grafal skirt coating. PowerPak pistons are made from 4032 aluminum alloy to allow for tighter cylinder to wall clearances, and improved temperature stability.

    • Forged piston for performance applications Fully-machined crown
    • Grafal anti-Friction coating on skirts
    • Phosphate-coated to reduce micro-welding and pin galling
    • Pin bores binished on CNC boring equipment
    • Deburred
    • High strength, light weight steel pins
    • Race proven round wire locks
    • Low drag ring pak
    • Lightweight slipper kirt forgings

    1.5, 1.5, 3.0mm file fit performance ring set included. For 305 c.i. S/B Chevy (3.736" bore x 3.48" stroke).

    • C/R 58cc:  10.0 
    • C/R 64cc:  9.3
    • C/R 70cc:  8.7

     

  • MAHLE Small Block Chevy 383 Dome Powerpak Pistons, 6 Inch Rods
    MAHLE Small Block Chevy 383 Dome Powerpak Pistons, 6 Inch Rods
    x
                

    The Mahle PowerPak pistons are a race proven lightweight forged design that are complete with rings, wrist pins and locks.  They are also completely phosphate coated plus feature an anti-friction Grafal skirt coating.  PowerPak pistons are made from 4032 aluminum alloy to allow for tighter cylinder to wall clearances, and improved temperature stability.

    1.5mm, 1.5mm, 3.0mm file fit performance ring set is included. For 383 c.i. S/B Chevy (4.000" bore x 3.75" stroke). Choose oversize diameter needed.

    1. Mahle's phosphate coating provides the grey appearance to the piston. This dry lubricant coating (not to be confused with a thermal film coating) provides a lubricant film in the pin bores and ring grooves until the oiling system of the engine reaches operating pressure; particularly useful during the initial start-up or break-in of engines to protect against galling and microwelding. The piston crown is still machineable.
    2. Mahle’s GRAFAL skirt coating reduces drag, scuffing, friction and cylinder bore wear; reduces piston noise.

    PowerPak Piston Chart (GIF)

  • MAHLE Small Block Chevy 383 Flattop Powerpak Pistons, 5.7 Inch Rods
    MAHLE Small Block Chevy 383 Flattop Powerpak Pistons, 5.7 Inch Rods
    x
                

    The Mahle PowerPak pistons are a race proven lightweight forged design that are complete with rings, wrist pins and locks.  They are also completely phosphate coated plus feature an anti-friction Grafal skirt coating.  PowerPak pistons are made from 4032 aluminum alloy to allow for tighter cylinder to wall clearances, and improved temperature stability.

    1.5mm, 1.5mm, 3.0mm file fit performance ring set is included. For 383 c.i. S/B Chevy (4.000" bore x 3.75" stroke). Choose oversize diameter needed.

    1. Mahle's phosphate coating provides the grey appearance to the piston. This dry lubricant coating (not to be confused with a thermal film coating) provides a lubricant film in the pin bores and ring grooves until the oiling system of the engine reaches operating pressure; particularly useful during the initial start-up or break-in of engines to protect against galling and microwelding. The piston crown is still machineable.
    2. Mahle’s GRAFAL skirt coating reduces drag, scuffing, friction and cylinder bore wear; reduces piston noise.

    PowerPak Piston Chart (GIF)

  • MAHLE Small Block Ford 347 Flattop Powerpak Pistons
    MAHLE Small Block Ford 347 Flattop Powerpak Pistons
    x
                

    The Mahle PowerPack Pistons are a race proven lightweight forged design that are complete with rings, wrist pins and locks. They are also completely phosphate coated plus feature an anti-friction Grafel skirt coating.

    1.5mm, 1.5mm, 3.0mm file fit performance ring set is included.

    • 347 uses .927" pin
    • Comp Height:  1.090  (includes oil support rails)
    • Pin Diameter:  0.927
    • Clearance Guide
      • *Meas. = 0.500
      • Min = 0.0025
      • Max = 0.0033

    *The location to measure piston-to-wall clearance for each application. This point is calculated from the bottom of the piston skirt and indicates the widest part of the piston and thus where to measure.

    PowerPak Piston Chart (GIF)

  • Mahle Ford 2.3 Powerpak Pistons, Flat Top, 5.7 Rod
    Mahle Ford 2.3 Powerpak Pistons, Flat Top, 5.7 Rod
    x
                

    The Mahle PowerPak pistons are a race proven lightweight forged design that are complete with rings, wrist pins and locks. They are also completely phosphate coated plus feature an anti-friction Grafel skirt coating.

    Ford Ford 2300cc (3.78" bore x 3.126" stroke). A 1.5mm, 1.5mm, 3.0mm file fit performance ring set is included. Uses .927" wrist pins.

    • Forged piston for performance applications
    • Fully-machined crown
    • Grafal anti-Friction coating on skirts
    • Phosphate-coated to reduce micro-welding and pin galling
    • Pin bores binished on CNC boring equipment
    • Deburred
    • High strength, light weight steel pins
    • Race proven round wire locks
    • Low drag ring pak
    • Lightweight slipper kirt forgings
  • MAHLE Small Block Chevy 383 Flattop Powerpak Pistons, 6 Inch Rods
    MAHLE Small Block Chevy 383 Flattop Powerpak Pistons, 6 Inch Rods
    x
                

    The Mahle PowerPak pistons are a race proven lightweight forged design that are complete with rings, wrist pins and locks. They are also completely phosphate coated plus feature an anti-friction Grafal skirt coating. PowerPak pistons are made from 4032 aluminum alloy to allow for tighter cylinder to wall clearances, and improved temperature stability.

    • Forged piston for performance applications
    • Lightweight slipper kirt forgings
    • Fully-machined crown
    • Grafal anti-Friction coating on skirts
    • Phosphate-coated to reduce micro-welding and pin galling
    • Pin bores finished on CNC boring equipment
    • Deburred
    • High strength, light weight steel pins
    • Race proven round wire locks
    • Low drag ring pak
    • 1.5mm, 1.5mm, 3.0mm file fit performance ring set is included
    For 383 c.i. S/B Chevy (4.000" bore x 3.75" stroke). Choose oversize diameter needed.

    PowerPak Piston Chart (GIF)

  • MAHLE Small Block Chevy 350 Powerpak Pistons, Flattop, 5.7 Rod
    MAHLE Small Block Chevy 350 Powerpak Pistons, Flattop, 5.7 Rod
    x
                

    The Mahle PowerPak pistons are a race proven lightweight forged design that are complete with rings, wrist pins and locks. They are also completely phosphate coated plus feature an anti-friction Grafal skirt coating. PowerPak pistons are made from 4032 aluminum alloy to allow for tighter cylinder to wall clearances, and improved temperature stability.

    1.5mm, 1.5mm, 3.0mm file fit performance ring set is included. For 350 c.i. S/B Chevy (4.000" bore x 3.48" stroke).

    • Comp Height 5.7" Rod:  1.550
    • Pin Diameter:  0.927
    • Clearance Guide
      • *Meas. = 0.500
      • Min = 0.0025
      • Max = 0.0033

    *The location to measure piston-to-wall clearance for each application. This point is calculated from the bottom of the piston skirt and indicates the widest part of the piston and thus where to measure. For all Mahle 350 pistons except 4V Flat 503-55004 for which Meas. = 0.465

    PowerPak Piston Chart Application (GIF)

  • MAHLE Small Block Chevy 350 Powerpak Pistons, Dome, 5.7 Inch Rod
    MAHLE Small Block Chevy 350 Powerpak Pistons, Dome, 5.7 Inch Rod
    x
                

    The Mahle PowerPak pistons are a race proven lightweight forged design that are complete with rings, wrist pins and locks. They are also completely phosphate coated plus feature an anti-friction Grafal skirt coating. PowerPak pistons are made from 4032 aluminum alloy to allow for tighter cylinder to wall clearances, and improved temperature stability.

    1.5mm, 1.5mm, 3.0mm file fit performance ring set is included. For 350 c.i. S/B Chevy (4.000" bore x 3.48" stroke).

    • Comp Height 5.7" Rod:  1.550
    • Pin Diameter:  0.927
    • Clearance Guide
      • *Meas. = 0.500
      • Min = 0.0025
      • Max = 0.0033

    *The location to measure piston-to-wall clearance for each application. This point is calculated from the bottom of the piston skirt and indicates the widest part of the piston and thus where to measure. For all Mahle 350 pistons except 4V Flat 503-55004 for which Meas. = 0.465

    PowerPak Piston Chart Application (GIF)

  • MAHLE Small Block Chevy 400 Dome Powerpak Pistons, 5.7 Inch Rods
    MAHLE Small Block Chevy 400 Dome Powerpak Pistons, 5.7 Inch Rods
    x
                

    The Mahle PowerPak pistons are a race proven lightweight forged design that are complete with rings, wrist pins and locks.  They are also completely phosphate coated plus feature an anti-friction Grafal skirt coating.  PowerPak pistons are made from 4032 aluminum alloy to allow for tighter cylinder to wall clearances, and improved temperature stability.

    1.5mm, 1.5mm, 3.0mm file fit performance ring set is included. For 400 c.i. S/B Chevy (4.125" bore x 3.75" stroke).

    • Comp Height 5.7" Rod:  1.425
    • Pin Diameter:  0.927
    • Clearance Guide
      • *Meas. = 0.500
      • Min = 0.0025
      • Max = 0.0033

    *The location to measure piston-to-wall clearance for each application. This point is calculated from the bottom of the piston skirt and indicates the widest part of the piston and thus where to measure.

    PowerPak Piston Chart (GIF)

  • MAHLE Small Block Chevy 400 Flat Top Powerpak Pistons, 5.7 Inch Rods
    MAHLE Small Block Chevy 400 Flat Top Powerpak Pistons, 5.7 Inch Rods
    x
                

    The Mahle PowerPak pistons are a race proven lightweight forged design that are complete with rings, wrist pins and locks.  They are also completely phosphate coated plus feature an anti-friction Grafal skirt coating.  PowerPak pistons are made from 4032 aluminum alloy to allow for tighter cylinder to wall clearances, and improved temperature stability.

    1.5mm, 1.5mm, 3.0mm file fit performance ring set is included. For 400 c.i. S/B Chevy (4.125" bore x 3.75" stroke).

    • Comp Height 5.7" Rod:  1.425
    • Pin Diameter:  0.927
    • Clearance Guide
      • *Meas. = 0.500
      • Min = 0.0025
      • Max = 0.0033

    *The location to measure piston-to-wall clearance for each application. This point is calculated from the bottom of the piston skirt and indicates the widest part of the piston and thus where to measure.

    PowerPak Piston Chart (GIF)

  • MAHLE Small Block Chevy 350 Powerpak Pistons, Dome, 6 Inch Rod
    MAHLE Small Block Chevy 350 Powerpak Pistons, Dome, 6 Inch Rod
    x
                

    The Mahle PowerPak pistons are a race proven lightweight forged design that are complete with rings, wrist pins and locks. They are also completely phosphate coated plus feature an anti-friction Grafal skirt coating. PowerPak pistons are made from 4032 aluminum alloy to allow for tighter cylinder to wall clearances, and improved temperature stability.

    1.5mm, 1.5mm, 3.0mm file fit performance ring set is included. For 350 c.i. S/B Chevy (4.000" bore x 3.48" stroke).

    • Comp Height 6.0" Rod:  1.250
    • Pin Diameter:  0.927
    • Clearance Guide
      • *Meas. = 0.500
      • Min = 0.0025
      • Max = 0.0033

    *The location to measure piston-to-wall clearance for each application. This point is calculated from the bottom of the piston skirt and indicates the widest part of the piston and thus where to measure. For all Mahle 350 pistons except 4V Flat 503-55004 for which Meas. = 0.465

    PowerPak Piston Chart Application (GIF)

  • MAHLE Small Block Chevy 350 Powerpak Pistons, Flattop, 6 Inch Rod
    MAHLE Small Block Chevy 350 Powerpak Pistons, Flattop, 6 Inch Rod
    x
                

    The Mahle PowerPak pistons are a race proven lightweight forged design that are complete with rings, wrist pins and locks. They are also completely phosphate coated plus feature an anti-friction Grafal skirt coating. PowerPak pistons are made from 4032 aluminum alloy to allow for tighter cylinder to wall clearances, and improved temperature stability.

    1.5mm, 1.5mm, 3.0mm file fit performance ring set is included. For 350 c.i. S/B Chevy (4.000" bore x 3.48" stroke).

    • Comp Height 6.0" Rod:  1.250
    • Pin Diameter:  0.927
    • Clearance Guide
      • *Meas. = 0.500
      • Min = 0.0025
      • Max = 0.0033

    *The location to measure piston-to-wall clearance for each application. This point is calculated from the bottom of the piston skirt and indicates the widest part of the piston and thus where to measure. For all Mahle 350 pistons except 4V Flat 503-55004 for which Meas. = 0.465

    PowerPak Piston Chart Application (GIF)

  • MAHLE Small Block Chevy 400 Flat Top Powerpak Pistons, 6 Inch Rods
    MAHLE Small Block Chevy 400 Flat Top Powerpak Pistons, 6 Inch Rods
    x
                

    The Mahle PowerPak pistons are a race proven lightweight forged design that are complete with rings, wrist pins and locks.  They are also completely phosphate coated plus feature an anti-friction Grafal skirt coating.  PowerPak pistons are made from 4032 aluminum alloy to allow for tighter cylinder to wall clearances, and improved temperature stability.

    1.5mm, 1.5mm, 3.0mm file fit performance ring set is included. For 400 c.i. S/B Chevy (4.125" bore x 3.75" stroke).

    • Comp Height 6.0" Rod:  1.250
    • Pin Diameter:  0.927
    • Clearance Guide
      • *Meas. = 0.500
      • Min = 0.0025
      • Max = 0.0033

    *The location to measure piston-to-wall clearance for each application. This point is calculated from the bottom of the piston skirt and indicates the widest part of the piston and thus where to measure.

    PowerPak Piston Chart (GIF)

  • MAHLE Small Block Chevy 400 Dome Powerpak Pistons, 6 Inch Rods
    MAHLE Small Block Chevy 400 Dome Powerpak Pistons, 6 Inch Rods
    x
                

    The Mahle PowerPak pistons are a race proven lightweight forged design that are complete with rings, wrist pins and locks.  They are also completely phosphate coated plus feature an anti-friction Grafal skirt coating.  PowerPak pistons are made from 4032 aluminum alloy to allow for tighter cylinder to wall clearances, and improved temperature stability.

    1.5mm, 1.5mm, 3.0mm file fit performance ring set is included. For 400 c.i. S/B Chevy (4.125" bore x 3.75" stroke).

    • Comp Height 6.0" Rod:  1.250
    • Pin Diameter:  0.927
    • Clearance Guide
      • *Meas. = 0.500
      • Min = 0.0025
      • Max = 0.0033

    *The location to measure piston-to-wall clearance for each application. This point is calculated from the bottom of the piston skirt and indicates the widest part of the piston and thus where to measure.

    PowerPak Piston Chart (GIF)

  • Light Forged S/B Chevy Assembly, 383 Flat Top, 6 Inch Rods
    Light Forged S/B Chevy Assembly, 383 Flat Top, 6 Inch Rods
    x
                

    Our lightweight forged rotating assembly engine rebuild kits include a 44-45 lb. Scat Superlight 4340 forged 2-pc rear main seal externally balanced crankshaft, Scat 4340 forged I-beam connecting rods and Mahle pistons complete with wrist pins, locks and rings. Rod and main bearings included. Standard size journals.

    Kit also includes balancing which is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience.  A kit will ship in 24-48 hours.



  • Light Forged Small Block Chevy Assembly, 434 Dome, 6 Inch Rods, 350 Mains
    Light Forged Small Block Chevy Assembly, 434 Dome, 6 Inch Rods, 350 Mains
    x
                

    Our lightweight forged rotating assembly engine rebuild kits include a 44-45 lb. Scat Superlight 4340 forged 2-pc rear main seal crankshaft, Scat 4340 forged I-beam connecting rods and Mahle pistons complete with wrist pins, locks and rings. Rod and main bearings included. Standard size journals.

    All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience. A kit purchased with the optional balance job will ship in 24-48 hours.

    Choose from standard, .030, or .040 oversize.

    NOTE: These rotating assemblies may require additional charges for heavy metal.

     


  • Light Forged Small Block Chevy Assembly, 434 Flat Top, 6 Rod, 350 Mains
    Light Forged Small Block Chevy Assembly, 434 Flat Top, 6 Rod, 350 Mains
    x
                

    Our lightweight forged rotating assembly engine rebuild kits include a 44-45 lb. Scat Superlight 4340 forged 2-pc rear main seal crankshaft, Scat 4340 forged I-beam connecting rods and Mahle pistons complete with wrist pins, locks and rings. Rod and main bearings included. Standard size journals.

    All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience. A kit purchased with the optional balance job will ship in 24-48 hours.

    Choose from standard or .020 oversize.

    NOTE: These rotating assemblies may require additional charges for heavy metal.


  • Light Forged Small Block Chevy Rotating Assem., 350 Flat Top, 5.7 In. Rod
    Light Forged Small Block Chevy Rotating Assem., 350 Flat Top, 5.7 In. Rod
    x
                

    Our lightweight forged rotating assembly engine rebuild kits include a 44-45 lb. Scat Superlight 4340 forged 2-pc rear main seal crankshaft, Scat 4340 forged I-beam connecting rods and Mahle pistons complete with wrist pins, locks and rings. Rod and main bearings included. Standard size journals.

    All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience. A kit purchased with the optional balance job will ship in 24-48 hours.


  • Light Forged Small Block Chevy Rotating Assem., 350 Inverted Dome, 5.7 Rod
    Light Forged Small Block Chevy Rotating Assem., 350 Inverted Dome, 5.7 Rod
    x
                

    Our lightweight forged rotating assembly engine rebuild kits include a 44-45 lb. Scat Superlight 4340 forged 2-pc rear main seal crankshaft, Scat 4340 forged I-beam connecting rods and Mahle pistons complete with wrist pins, locks and rings. Rod and main bearings included. Standard size journals.

    All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience. A kit purchased with the optional balance job will ship in 24-48 hours.

  • Light Forged Small Block Chevy Rotating Assembly, 350 Dome, 5.7 Inch Rods
    Light Forged Small Block Chevy Rotating Assembly, 350 Dome, 5.7 Inch Rods
    x
                

    Our lightweight forged rotating assembly engine rebuild kits include a 44-45 lb. Scat Superlight 4340 forged 2-pc rear main seal crankshaft, Scat 4340 forged I-beam connecting rods and Mahle pistons complete with wrist pins, locks and rings. Rod and main bearings included. Standard size journals.

    All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience. A kit purchased with the optional balance job will ship in 24-48 hours.


  • Light Forged Small Block Chevy Rotating Assembly, 383 Dome, 6 Inch Rods
    Light Forged Small Block Chevy Rotating Assembly, 383 Dome, 6 Inch Rods
    x
                

    Our lightweight forged rotating assembly engine rebuild kits include a 44-45 lb. Scat Superlight 4340 forged 2-pc rear main seal externally balanced crankshaft, Scat 4340 forged I-beam connecting rods and Mahle pistons complete with wrist pins, locks and rings. Rod and main bearings included. Standard size journals.

    Kit also includes balancing which is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience. A kit will ship in 24-48 hours.



  • Light Forged Small Block Chevy Rotating Assem., 350 Flat Top, 6 Inch Rods
    Light Forged Small Block Chevy Rotating Assem., 350 Flat Top, 6 Inch Rods
    x
                

    Our lightweight forged rotating assembly engine rebuild kits include a 44-45 lb. Scat Superlight 4340 forged 2-pc rear main seal crankshaft, Scat 4340 forged I-beam connecting rods and Mahle pistons complete with wrist pins, locks and rings. Rod and main bearings included. Standard size journals.

    All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience. A kit purchased with the optional balance job will ship in 24-48 hours.


  • Light Forged Small Block Chevy Rotating Assembly, 383 Flat Top, 5.7 In. Rods
    Light Forged Small Block Chevy Rotating Assembly, 383 Flat Top, 5.7 In. Rods
    x
                

    Our lightweight forged rotating assembly engine rebuild kits include a 44-45 lb. Scat Superlight 4340 forged 2-pc rear main seal crankshaft, Scat 4340 forged I-beam connecting rods and Mahle pistons complete with wrist pins, locks and rings. Rod and main bearings included. Standard size journals.

    All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience. A kit purchased with the optional balance job will ship in 24-48 hours.


  • Light Forged Small Block Chevy Rotating Assembly, 383 Dome, 5.7 Inch Rods
    Light Forged Small Block Chevy Rotating Assembly, 383 Dome, 5.7 Inch Rods
    x
                

    Our lightweight forged rotating assembly engine rebuild kits include a 44-45 lb. Scat Superlight 4340 forged 2-pc rear main seal crankshaft, Scat 4340 forged I-beam connecting rods and Mahle pistons complete with wrist pins, locks and rings. Rod and main bearings included. Standard size journals.

    All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience. A kit purchased with the optional balance job will ship in 24-48 hours.


  • Light Forged Small Block Chevy Rotating Assem., 383 Inverted Dome, 5.7 Rod
    Light Forged Small Block Chevy Rotating Assem., 383 Inverted Dome, 5.7 Rod
    x
                

    Our lightweight forged rotating assembly engine rebuild kits include a 44-45 lb. Scat Superlight 4340 forged 2-pc rear main seal crankshaft, Scat 4340 forged I-beam connecting rods and Mahle pistons complete with wrist pins, locks and rings. Rod and main bearings included. Standard size journals.

    All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience. A kit purchased with the optional balance job will ship in 24-48 hours.


  • Light Forged Small Block Chevy Rotating Assembly, 350 Dome, 6 Inch Rods
    Light Forged Small Block Chevy Rotating Assembly, 350 Dome, 6 Inch Rods
    x
                

    Our lightweight forged rotating assembly engine rebuild kits include a 44-45 lb. Scat Superlight 4340 forged 2-pc rear main seal crankshaft, Scat 4340 forged I-beam connecting rods and Mahle pistons complete with wrist pins, locks and rings. Rod and main bearings included. Standard size journals.

    All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience. A kit purchased with the optional balance job will ship in 24-48 hours.


  • Garage Sale - MAHLE Small Block Chevy 383 Flattop Powerpak Pistons, 5.7 Inch Rods, .060 Over
    Garage Sale
    Garage Sale - MAHLE Small Block Chevy 383 Flattop Powerpak Pistons, 5.7 Inch Rods, .060 Over
    x
                Please view the product's page for more information
            
  • Garage Sale - MAHLE Small Block Chevy 383 Inverted Dome Powerpak Pistons, 5.7 Inch Rods
    Garage Sale
    Garage Sale - MAHLE Small Block Chevy 383 Inverted Dome Powerpak Pistons, 5.7 Inch Rods
    x
                Please view the product's page for more information
            
  • Garage Sale - MAHLE Small Block Chevy 350 Powerpak Pistons, Dome, 5.7 Inch Rod
    Garage Sale
    Garage Sale - MAHLE Small Block Chevy 350 Powerpak Pistons, Dome, 5.7 Inch Rod
    x
                Please view the product's page for more information
            
  • Garage Sale - MAHLE Small Block Chevy 434 Dome Powerpak Pistons, 6 In Rod, 4 In Stroke
    Garage Sale
    Garage Sale - MAHLE Small Block Chevy 434 Dome Powerpak Pistons, 6 In Rod, 4 In Stroke
    x
                

    The Mahle PowerPak pistons are a race proven lightweight forged design that are complete with rings, wrist pins and locks.  They are also completely phosphate coated plus feature an anti-friction Grafal skirt coating.  PowerPak pistons are made from 4032 aluminum alloy to allow for tighter cylinder to wall clearances, and improved temperature stability.

    1.5mm, 1.5mm, 3.0mm file fit performance ring set is included. For 434 c.i. S/B Chevy (4.125" bore x 4.00" stroke). Choose standard or oversize diameter needed.

    • Comp Height:  1.000  (includes oil support rails)
    • Pin Diameter:  0.927
    • Clearance Guide
      • *Meas. = 0.350
      • Min = 0.0025
      • Max = 0.0033

    *The location to measure piston-to-wall clearance for each application. This point is calculated from the bottom of the piston skirt and indicates the widest part of the piston and thus where to measure.

     

    Clearance!!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - Scat Pro Comp I Beam 5.7" Rods With MAHLE 383 Flattop Powerpak Pistons
    Garage Sale
    Garage Sale - Scat Pro Comp I Beam 5.7" Rods With MAHLE 383 Flattop Powerpak Pistons
    x
                

    Scat 4340 forged I-beam connecting rods and Mahle pistons complete with wrist pins, locks and rings. 

     

    These pistons and rods are garage sale priced because they have been assembled and returned.  Same pistons and rods that come with 9153035. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Mahle Chevy 434 Flat Top PowerPak Pistons, Standard
    Garage Sale
    Mahle Chevy 434 Flat Top PowerPak Pistons, Standard
    x
                

    The Mahle PowerPak pistons are a race proven lightweight forged design that are complete with rings, wrist pins and locks.  They are also completely phosphate coated plus feature an anti-friction Grafal skirt coating.  PowerPak pistons are made from 4032 aluminum alloy to allow for tighter cylinder to wall clearances, and improved temperature stability.

    1.5mm, 1.5mm, 3.0mm file fit performance ring set is included. For 434 c.i. S/B Chevy (4.125" bore x 4.00" stroke). Choose standard or oversize diameter needed.

    • Comp Height:  1.000  (includes oil support rails)
    • Pin Diameter:  0.927
    • Clearance Guide
      • *Meas. = 0.350
      • Min = 0.0025
      • Max = 0.0033

    *The location to measure piston-to-wall clearance for each application. This point is calculated from the bottom of the piston skirt and indicates the widest part of the piston and thus where to measure.